Items where Year is 2023

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | M | N | O | P | Q | R | S | V
Number of items: 111.

A

Abhilash, and Meshram, Pratima and Gupta, A and Sen, Subhadra (2023) Steel Plant Wastes as a Resource of Rare Earth Elements and Rare Metals–Characterisation, Resource Estimation, and Economic Assessment. Transactions of the Indian Institute of Metals .

Adediran, A A and Akinwande, A A and Adesina, O S and Agbaso, V and Balogun, O A and Kumar, B Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9(8) .

Akhtar, M and Khajuria, A (2023) The Synergistic Effects of Boron and Impression Creep Testing during Paced Controlling of Temperature for P91 Steels. Advanced Engineering Materials .

Ammasi, A and Ul Haque, M U (2023) Influence of rare earth metals on inclusion modification of dual phase steel Influence des metaux de terres rares sur la modification des inclusions de l'acier biphase. Canadian Metallurgical Quarterly .

Anand, Sameer and Haldar, Nimai and Datta, Saurav and Das, Atanu (2023) Experimental investigation on microstructure and mechanical property of wire arc additively manufactured SS308L built part. Sadhana-Academy Proceedings in Engineering Sciences, 48(4) .

Andavarapu, Mohana Rao and Vidyadhar, A and Prasad, Ranjit and Sahoo, M (2023) Efficacy of Pilot Scale Batac Jig on LVC Coal Utilization for Coke Making. Transactions of the Indian Institute of Metals .

Arora, P and Tewary, S and Krishnamurthi, S and Kumari, Neelam (2023) An experimental setup and segmentation method for CFU counting on an agar plate for the assessment of drinking water. Journal of Microbiological Methods, 214 .

B

Banerjee, Riya and Chakladar, S and Chattopadhyay, S K and Chakravarty, S (2023) Leaching of rare earth elements from coal ash using low molecular weight organocarboxylic acids: Complexation overview and kinetic evaluation. International Journal of Chemical Kinetics .

Belwanshi, V and Rane, K and Kumar, V and Pramanick, B (2023) Design Guidelines for Thin Diaphragm-Based Microsystems through Comprehensive Numerical and Analytical Studies. Micromachines, 14(9) .

Bhuyan, D and Sastry, G V S and Patra, S and Pradhan, S K and Manna, R (2023) Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel. Materials Characterization, 200 .

Bourzik, O and Baba, K and Akkouri, N and Meshram, Rohit B and Bouyakhsass, R and Nounah, A (2023) Life cycle assessment and thermophysical properties of a fly ash-based geopolymer containing drinking water treatment sludge-. Environmental Science and Pollution Research .

C

Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International .

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2) . pp. 677-697.

Chandan, A K and Murugaiyan, Premkumar and Chowdhury, S G (2023) Temperature-dependent stacking fault energy, deformation behavior, and tensile properties of a new high-entropy alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 883 .

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

D

Das, S and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, Ashis K (2023) Impact of Bounding Media on the Attenuation Characteristics of Magnetostrictive Signal Obtained from Pipe Embedded in Soil and Sand. Journal of Nondestructive Evaluation, 42(3) .

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals .

Dipali, Ranjit and Prasad, R K and Sahu, S K and Randhawa, N S (2023) Design and Optimization Study of Metal Recovery from Scrap NdFeB Magnets Using Response Surface Methodology. Industrial & Engineering Chemistry Research, 62(30) . pp. 11948-11956.

Dolzhenko, P and Odnobokova, M and Tikhonova, M and Kaibyshev, R and Chowdhury, S G and Belyakov, A (2023) Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing. Materials Characterization, 206(Part: A) .

E

Eticha, Z G and Alex, T C and Olu, F E and Yimam, A and Alemayehu, E (2023) Effects of doping iron on the colouring properties of copper chromate pigment. Bulletin of Materials Science, 46(2) .

G

Gautam, P and De, A K and Rao, M D and Sinha, I and Behera, C K and Singh, K K (2023) Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies. Environmental Science and Pollution Research .

Ghosh, M (2023) Effect of flue gas constituents on boiler tube failure of a captive power plant. Engineering Failure Analysis .

Ghosh, M (2023) Failure Investigation of Boiler Tube: A Root Cause Analysis. Journal of Failure Analysis & Prevention .

Ghosh, M and Mahato, B and Ravi Kumar, B (2023) Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis. Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis .

Guguloth, K and Roy, Nilima (2023) Creep life estimation of reformer alloy using 0-projection method- A neuro fuzzy approach. International Journal of Pressure Vessels and Piping, 203 .

Gupta, N and Bhattacharya, P (2023) Microwave-plasma induced one-step synthesis of Ni(PO3)2 nanosphere-loaded bio-waste derived N, P co-doped carbon for an asymmetric supercapacitor with prolonged life. Journal of Materials Chemistry C, 11(39) . pp. 13503-13517.

H

Halder, N and Anand, S and Datta, S and Das, A (2023) On Fabrication of Inconel 718 Slab by Wire Arc Additive Manufacturing: Study of Built Microstructure and Mechanical Properties. Arabian Journal for Science & Technology .

Husain, Md Murtuja and Halder, N and Meena, L K and Ghosh, M (2023) Evaluation of Microstructure, Mechanical Properties, Wear Resistance and Corrosion Behaviour of Friction Stir‑Processed AZ31B‑H24 Magnesium Alloy. Metallography, Microstructure & analysis .

J

Jain, Vipul and Kumar, Piyush and Bagui, Sumanta and Halder, C and Patra, Sudipta and Ghosh, Abhijit (2023) A comprehensive study on the through-process Goss texture evolution in Fe-3.78 wt.%Si grain-oriented electrical steel. Materials Chemistry and Physics, 309 .

Jayaraj, J and Srinivasan, A and Arunchandran, C and Rajinikanth, V (2023) Corrosion and in vitro characteristics of cerium phosphate-based chemical conversion coating on AZ31 magnesium alloy. Applied Surface Science, 644 .

Jena, P S M and Tripathy, S and Mahato, B and Paulose, N and Fernando, D.C and Sahu, J K (2023) Role of void nucleation at primary-gamma'/gamma interface on strain softening of nickel-base superalloy 720Li. Journal of Alloys and Compounds, 958 .

Jha, Gaurav and Soren, S and Mehta, K D (2023) Assessment of the internal chemistry nexus of coke and biomass-based sinters. Sadhana-Academy Proceedings in Engineering Sciences, 48(4) .

K

Kaithwas, C K and Bairi, L R and Mozumder, Y H and Pradhan, S K and Mandal, S (2023) On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H. Materials and Corrosion / Werkstoffe und Korrosion .

Kancharla, H and Mandal, G K and Pradeep, K G and Singh, S S and Mondal, K (2023) Understanding the Formation Mechanism of Al-Rich Interfacial Layer during Galvanizing of Cu Pre-coated High-Strength Steel Sheet. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Prasad, N K and Vishwanath, K and Bhushan, B and Godbole, K and Singh, S S and Mondal, K (2023) Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel. Journal of Applied Electrochemistry .

Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals .

Kar, Shubhada and Srivastava, V C and Mandal, G K (2023) Low-density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. Journal of Alloys and Compounds, 963 .

Karade, V C and Sutar, S S and Jang, J S and Gour, K S and Shin, S W and Suryawanshi, M P and Kamat, R K and Dongale, T D and Kim, J H and Yun, J H (2023) Unraveling the Effect of Compositional Ratios on the Kesterite Thin-Film Solar Cells Using Machine Learning Techniques. Crystals, 13(11) .

Kiran, U R and Panchal, A and Kamal, S S K and Sahu, K K and Mishra, D and Nandy, T K and Nagesh, Ch R V S (2023) Microstructure and Mechanical Properties of Tungsten Heavy Alloy Prepared Using Tungsten Metal Powder Produced from Heavy Alloy Scrap. Defence Science Journal, 73(2) . pp. 240-250.

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Ranjan, Manish and Kawasaki, M and Gubicza, Jeno (2023) Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy. International Journal of Plasticity, 169 .

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2023) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Kishore, Kaushal and Kushwaha, S and Teja, K S P and Chandan, A K and Mukherjee, M and Adhikary, M and Kumar, A (2023) Sigma phase embrittlement-induced failures of heat-resistant stainless steel traveling grate links. Engineering Failure Analysis, 144 .

Kumar, Alok and Kumari, Sneha and Mustapha, K A and Chakladar, S and Chakravarty, S (2023) Geochemical characteristics of the Rajmahal coals in Dhulia North Block, Eastern India: implication to their utilization and environment. Environmental Geochemistry and Health, 40(10) SI . pp. 6967-6983.

Kumar, Amit and Guguloth, K and Pandey, S M and Fydrych, D and Sirohi, S and Pandey, C (2023) Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science .

Kumar, Amritesh and Sarma, Ritam and Bag, Swarup and Srivastava, V C and Kapil, Sajan (2023) Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer. Science and Technology of Welding and Joining, 28(9) . pp. 914-922.

Kumar, Arun and Agarwal, Ashish and Kumar, A and Kumar, Sunil (2023) Prediction of hot metal temperature in a blast furnace iron-making process using multivariate data analysis and machine learning methodology. Metallurgical Research & Technology, 120(6) .

Kumar, Ashish and Nirala , A and Singh, V P and Sahoo, Biraj K and Singh, R C and Chaudhary, R and Dewangan, Ashok K and Gaurav, G K and Klemes, J J and Liu, X H (2023) The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis. Journal of Cleaner Production, 398 .

Kumar, Ashish and Singh, V P and Nirala , A and Singh, R C and Chaudhary, R and Mourad, A H I and Sahoo, Biraj K and Kumar , Deepak (2023) Influence of tool rotational speed on mechanical and corrosion behavior of friction stir processed AZ31/Al2O3 nanocomposite. Journal of Magnesium and Alloys, 11(7) . pp. 2585-2599.

Kumar, M S and Sulthan, K R and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V and Chinthapudi, E and Basu, S and Thorat, B N (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. In: 74th Annual Indian Chemical Engineering Congress of Indian-Institute-of-Chemical-Engineers (CHEMCON), DEC 26-30, 2021, CSIR Inst Minerals & Mat Technol, Bhubaneswar, INDIA.

Kumar, M S and Yang, C H and Farooq, M U and Kavimani, V and Adesoji, A A (2023) Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect-free melt pool formations. Scientific Reports, 13(1) .

Kumar, Rakesh (2023) In Retrospect: Some Peculiarities Observed in the Mechanical Activation of Ground-Granulated Blast Furnace Slag and Fly Ash. Transactions of the Indian Institute of Metals .

Kumar, Rakesh and Alex, T C (2023) Phase stability and role of mechanical activation in the chemical beneficiation of red mud. Journal of Thermal Analysis and Calorimetry, 148 . pp. 9813-9827.

Kumar, Ranjeet and Gokhale, A and Varma, Anand and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Role of Nb (C, N) and Cr carbides on the fracture behavior of Super304H steel using in-situ tensile studies. Materials Letters, 351 .

Kumar, Ranjeet and Halder, Prahlad and Amrithalingam, Murugaiyan and Yuvraj, N and Varma, A and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Experimental and Numerical Analysis of Residual Stresses in Similar and Dissimilar Welds of T91 and Super304H Steel Tubes. Journal of Materials Engineering and Performance .

Kumar, Sunil and Nandi, Sukalpan and Pattanayek, S K and Madan, M and Kaushik, B and Kumar, R and Krishna, K Gopala (2023) Atomistic characterization of multi nano-crystal formation process in Fe-Cr-Ni alloy during directional solidification: Perspective to the additive manufacturing. Materials Chemistry and Physics, 308 .

Kumar, Sunil and Sahu, Ranjan K (2023) Aluminum nanotubes as an efficient catalyst for hydrogen production via thermochemical water splitting: a reactive molecular dynamics simulation. Physical Chemistry Chemical Physics .

Kumari, Aarti and Sahu, S K (2023) A comprehensive review on recycling of critical raw materials from spent neodymium iron boron (NdFeB) magnet. Separation and Purification Technology, 317 .

Kumari, Ajita and Vasumathi, N and Vijaya Kumar, T V (2023) Statistical analysis and optimization studies on recovery of carbon from steel plant sludge. Materials Today: Proceedings .

Kumari, Beena and Madhukar, Anuradha and Sahney, Sangeeta (2023) A R&D productivity model to achieve self-sustainability for public funded/CSIR R&D laboratories, India. Internation Journal of Productivity and Performance Management, A head of Print .

Kumari, Sneha and Roy, T and Chakladar, S and Kumar, Alok and Arif, Md and Mohanty, Ashok and Kundu, Rajen and Chakravarty, S (2023) Distribution, mode of occurrence, and significance of rare-earth elements in coal from Samaleswari open cast coal blocks, Odisha, India with their provenance and paleodepositional environment. Environmental Earth Sciences, 82(5) .

Kurusta, Tamas and Mucsi, G and Kumar, Sanjay and Kristaly, Ferenc (2023) Carbon dioxide sequestration by mechanical activation of Linz-Donawitz steel slag; the effect of water on CO2 capture. Fuel, 352 .

Kushwaha, A and Sharma, A and Bhatt, B B and Mukhopadhyay, Amartya and Gupta, D (2023) Inkjet-Printed Graphene-Modified Aluminum Current Collector for High-Voltage Lithium-Ion Battery. ACS Applied Energy Materials .

M

Mahanta, C R and Sahoo, P R and Mohanta, M K and Rath, R K and Dey, Shobhana and Tripathy, Sunil Kumar and Prasad, J and Venkatesh, Akella Satya (2023) Mineralogical Characteristics of Hematitic Iron Ore: A Geometallurgical Study on Ore from Eastern India. Minerals, 13(9) .

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Discrete wavelet transforms analysis of vibration signals for correlating tool wear in diamond turning of additive manufactured Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture .

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) In-process monitoring of the ultraprecision machining process with convolution neural networks. International Journal of Computer Integrated Manufacturing .

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Monitoring of machining process anomalies in diamond turning of Ti6Al4V alloy using transfer learning-based algorithms. Computers& Industrial Engineering , 182 .

Mayuri, S and Jha, Niki S and Jha, S K (2023) Curcumin-capped gold nanorods as optical sensing platform for sequence-specific detection of DNA based on their self-assembly. International Journal of Biological Macromolecules, 253(Part 3) .

Meena, L K and Seshagiri, R and Singh, Raghuvir (2023) Corrosion behavior of strontium-modified Al-12Si cast alloys in flowing and stagnant chloride-containing media. Journal of Alloys and Compounds, 962 .

Meshram, Pratima and Abhilash, (2023) Material Recycling: Unearthing Metals from Anthropogenic and Industrial Resources. In: New Horizons in Metallurgy, Materials and Manufacturing. Springer, India, pp. 69-89. ISBN 978-981-19-5569-3

Meshram, Pratima and Pandey, B D and Mankhand, T R (2023) Recovery of valuable metals from cathodic active material of spent lithium-ion batteries: Leaching and kinetic aspects. Waste Management, 45 . pp. 306-313.

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201 .

Murugaiyan, Premkumar and Mitra, Amitava and Patro, A K and Roy, Rajat K and Panda, Ashis K (2023) Magnetostriction of Fe-rich FeSiB(P)NbCu amorphous and nanocrystalline soft-magnetic alloys. Journal of Alloys and Compounds, 960 .

Murugesan, A P and Mandal, M and Poddar, Palash and Bagui, Sumanta (2023) Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys. Journal of Materials Engineering and Performance .

N

Nana, Achile and Singla, Rashmi and Epey, Noela and Kassem, N N and Sakue, E N and Rodrigue, C K and Kamseu, E and Kumar, Sanjay and Leonelli, C (2023) Design and characterization of Cameroonian pegmatite-calcined clay binary mortars via geopolymerisation. Journal of Building Engineering, 76 .

Nandi, Sukalpan and Kumar, Sunil (2023) Atomistic structural transformation of iron single crystal under bi-axial stretching using classical molecular dynamics simulation. Bulletin of Materials Science, 45(4) .

O

Omiogbemi, I M B and Faci, N D and Gummadi, A K and Negash, S M and Sardar, B and Gad, S M and Dagwa, I M and Audu, S T (2023) The Influence of Arc Welding Process on the Mechanical and Microstructural Characteristics of Low Carbon Steel in a Corrosive Environment. Macromolecular Symposia .

P

Paidi, A K and Sharma, A and Paidi, V K and Illa, M P and Lee , K S and Lee, S S and Ahu, D and Mukhopadhyay, Amartya (2023) Na2ZrFe(PO4)(3)-A Rhombohedral NASICON-Structured Material: Synthesis, Structure and Na-Intercalation Behavior. Inorganic Chemistry, 62(10) . pp. 4124-4135.

Panda, Ashis K and Anurag, Kumar and Das, S and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, A (2023) Impact of stress-induced anisotropic modifications on magneto-impedance behavior of rapidly quenched CoFe-based microwires. Journal of Alloys and Compounds, 960 .

Panda, S and Devi, N and Sahu, S K (2023) Recent trends in eco-sustainable recycling of energy-critical elements from low-grade and secondary resources. Environmental Science and Pollution Research .

Polimera, Srihith and Gali , A and Nath, Susanta Kumar and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J (2023) Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler. Polymer Composites, 44(10) . pp. 6454-6466.

Pradhan, S and Anuraag, N S and Shaw, S K and Gangwar, A and Rao, K S and Sharma, A and Mandal, B P and Prasad, N K (2023) MnNCN@C nanocomposite as an anode for Li-ion battery. Materials Science Engineering B-Advanced Functional Solid-State Materials, 298 .

Pramanik, Swati and Kumari, Aarti and Sinha, Manish K and Munshi, B and Sahu, S K (2023) Valorization of phosphor powder of waste fluorescent tubes with an emphasis on the recovery of terbium oxide (Tb4O7). Separation and Purification Technology, 322 .

Pratihar, B and Jana, Animesh and Biswas, S and De, Srishendu (2023) Pd nanoparticles-decorated borophene nanosheets for intrinsic polarization-induced visible light photocatalysis. Catalysis Science & Technology, 13(5) . pp. 1558-1570.

Q

Qi, Chongchong and Benson, Craig H (2023) Managing Mining and Minerals Processing Wastes_chapter9. In: Managing Mining and Minerals Processing Wastes Concepts, Design, and Applications. Elsevier, Central South University Press, 01-30. ISBN 978-0-323-91283-9

R

Raji, M A and Baba, A A and Abhilash, (2023) Uranium extraction from sulphuric acid leach liquor by Cyanex®272 as intermediate in nuclear fuel cell. Journal of Radioanalytical and Nuclear Chemistry, 332(11) . pp. 4471-4476.

Rao, A U and Tiwari, S K and Kharb, A S and Chawla, V and Dubey, Paritosh and Goyat, M S and Saxena, V and Chawla, A K (2023) Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings. Physica Scripta, 98(12) .

Rao, M D and Meshram, Pratima and Abhilash, and Singh, K K (2023) Validation of Bromide Leaching through Response Surface Methodology and Separation of Gold from Waste Printed Circuit Boards. Minerals, 13(4) .

Rao, M D and Meshram, R B and Singh, K K and Morrison, C A and Love, J B (2023) Life cycle analysis on sequential recovery of copper and gold from waste printed circuit boards. Waste Management, 171 . pp. 621-627.

Rout, S and Abhilash, and Meshram, Pratima and Zhang, PT (2023) A Comprehensive Review on Occurrence and Processing of Phosphate Rock Based Resources- Focus on REEs. Mineral Processing and Extractive Metallurgy Review .

Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218.

S

Sahu, M and Ghosh, A and Kumar, J and Singh, S N and Sagar, S P (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance .

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S. N. and Sagar, Sarmishtha (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance . (In Press)

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185.

Sai Kumar, M and K, Rashid Sulthan and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering, .

Sankar, T K and Abhilash, and Meshram, Pratima (2023) Environmental Impact Assessment in the Entire Life Cycle of Lithium-Ion Batteries. Reviews of Environmental Contamination and Toxicology, 262(1) .

Sarkar, A and Panda, Ashis K and Mitra, A and Mallick, A B (2023) Tuneable magnetic properties of single-domain oxidation-resistant core/shell FeCo/Cu nanostructures. Journal of Materials Science-Materials in Electronics, 34(2) .

Sen, Arindam and Kumar, Sudip and Kundu, Rajen (2023) Recycling of Cathode Material from Spent Lithium-Ion Batteries for Energy Application. In: International Conference on “Recent Advances in Materials Chemistry and Catalysis” , 1-3 March, 2023, Department of Chemistry- Dibrugarh University ,Dibrugarh 786004, Assam (India).

Shaw, S K and Sharma, A and Kailashiya, J and Gupta, Santosh K and Meena, Sher Singh and Dash, D and Maiti, P and Prasad, N K (2023) Mesoporous Fe3O4 nanoparticle: A prospective nano heat generator for thermo-therapeutic cancer treatment modality. Journal of Magnetism and Magnetic Materials, 578 .

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Shivam, V and Kar, S and Mandal, G K and Srivastava, V C (2023) Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. Journal of Alloys and Compounds, 963 .

Singh, Komal and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2023) Enhanced thermoelectric performance of mechanically hard nano-crystalline-sputtered SnSe thin film compared to the bulk of SnSe. Journal of Materials Science: Materials in Electronics, 34(13) .

Singh, Shivangini and Mandal, Manas and Mishra, Trilochan and Angayarkanni, A and Veldurthi, N K and Pati, S S (2023) Facile Synthesis of Citric Acid Functionalized Fe3O4@Activated Carbon Magnetic Nanocomposite for Efficient Adsorption of Brilliant Green Dye from Wastewater. Chemistryselect, 8(38) .

Sinha, Manish K and Tanvar, H and Sahu, S K and Mishra, B (2023) A Review on Recovery of Terbium from Primary and Secondary Resources: Current State and Future Perspective. Mineral Processing and Extractive Metallurgy Review .

Sundara Bharathy , R and Venugopalan, T and Ghosh, M (2023) Efect of Precipitation Characteristics on Mechanical Properties and Stretch Flangeability of Nano‑Dispersion Strengthened High Strength Ferritic Steel. Metallography, Microstructure & Analysis .

Szabo, R and Kristaly, Ferenc and Nagy, S and Singla, Rashmi and Mucsi, Gabor and Kumar, Sanjay (2023) Reaction, structure and properties of eco-friendly geopolymer cement derived from mechanically activated pumice. Ceramics International, 49(4) . pp. 6756-6763.

V

Vasumathi, N and Chennakesavulu, K and Cassandra Austen, I and Kumari, Ajita and Kalidoss, J and Sukumaran Suseelamma, S and Vijaya Kumar, T V and Gopalkrishna, S J (2023) Development of a novel biocollector for flotation of low grade graphite ore. Energy sources, Part A: Recovery, utilization, and environmental effects (2.9).

Vasumathi, N and K, Chennakesavulu and I, Cassandra Austen and Madhira, Sai K and Vijaya Kumar, T V and Kumari, Ajita (2023) Study on Flotation of Sillimanite Using Plant-Based Collector. Sustainable Chemical, Mineral and Material Processing: Lecture Notes in Mechanical Engineering .

Vasumathi, N and Sai Kumar, M and Abhishek, D S V and Vijaya Kumar, T V and Gopalkrishna, S.J. (2023) A Comparative Study on Flotation of Coal Using Eco-Friendly Single Reagent and Conventional Dual-Reagent System. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering .

Vasumathi, N and Sarjekar, A and Chandrayan, H and Chennakesavulu, K and Reddy, G R and Kumar, T V Vijaya and El-Gendy, N S and Gopalakrishna, S J (2023) A Mini Review on Flotation Techniques and Reagents Used in Graphite Beneficiation. International Journal of Chemical Engineering, 2023 .

Verma, A K and Johari, K K and Dubey, Paritosh and Candolfi, C and Lenoir, B and Walia, S and Dhakate, S R and Gahtori, B (2023) Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy. Journal of Alloys and Compounds, 947 .

Vishwakarma, Jaydeep and Rajpurohit, R S and Rao, G S and Chattopadhyay, K and Srinivas , N C S (2023) Low cycle fatigue behavior of additive manufactured maraging steel: Influence of build orientation and heat treatment. Materials Letters, 350 .

This list was generated on Thu Mar 28 16:25:14 2024 IST.