Items where Year is 2023

Abhilash and Meshram, Pratima and Gupta, A and Sen, Subhadra (2023) Steel Plant Wastes as a Resource of Rare Earth Elements and Rare Metals–Characterisation, Resource Estimation, and Economic Assessment. Transactions of the Indian Institute of Metals.

Adediran, A A and Akinwande, A A and Adesina, O S and Agbaso, V and Balogun, O A and Kumar, B Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9(8).

Akhtar, M and Khajuria, A (2023) The Synergistic Effects of Boron and Impression Creep Testing during Paced Controlling of Temperature for P91 Steels. Advanced Engineering Materials.

Ammasi, Ayyandurai and Ul Haque, Mohd Uzair (2023) Influence of rare earth metals on inclusion modification of dual phase steel. The Canadian Journal of Metallurgy and Materials Science. pp. 1030-1039.

Ammasi, A and Ul Haque, M U (2023) Influence of rare earth metals on inclusion modification of dual phase steel Influence des metaux de terres rares sur la modification des inclusions de l'acier biphase. Canadian Metallurgical Quarterly.

Anand, Sameer and Haldar, Nimai and Das, Atanu and Datta, Saurav (2023) Microstructure and Mechanical Property Characterization of Wire Arc Additively Manufactured SS308L Built Part: Study of Heat Interaction Phenomena. Journal of Materials Engineering and Performance, 33. pp. 13178-13202.

Anand, Sameer and Haldar, Nimai and Datta, Saurav and Das, Atanu (2023) Experimental investigation on microstructure and mechanical property of wire arc additively manufactured SS308L built part. Sadhana-Academy Proceedings in Engineering Sciences, 48(4).

Andavarapu, Mohana Rao and Vidyadhar, A and Prasad, Ranjit and Sahoo, M (2023) Efficacy of Pilot Scale Batac Jig on LVC Coal Utilization for Coke Making. Transactions of the Indian Institute of Metals.

Arora, P and Tewary, S and Krishnamurthi, S and Kumari, Neelam (2023) An experimental setup and segmentation method for CFU counting on an agar plate for the assessment of drinking water. Journal of Microbiological Methods, 214.

Banerjee, Riya and Chakladar, S and Chattopadhyay, S K and Chakravarty, S (2023) Leaching of rare earth elements from coal ash using low molecular weight organocarboxylic acids: Complexation overview and kinetic evaluation. International Journal of Chemical Kinetics.

Belwanshi, V and Rane, K and Kumar, V and Pramanick, B (2023) Design Guidelines for Thin Diaphragm-Based Microsystems through Comprehensive Numerical and Analytical Studies. Micromachines, 14(9).

Bhuyan, D and Sastry, G V S and Patra, S and Pradhan, S K and Manna, R (2023) Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel. Materials Characterization, 200.

Bourzik, O and Baba, K and Akkouri, N and Meshram, Rohit B and Bouyakhsass, R and Nounah, A (2023) Life cycle assessment and thermophysical properties of a fly ash-based geopolymer containing drinking water treatment sludge-. Environmental Science and Pollution Research.

Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International.

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2). pp. 677-697.

Chandan, A K and Murugaiyan, Premkumar and Chowdhury, S G (2023) Temperature-dependent stacking fault energy, deformation behavior, and tensile properties of a new high-entropy alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 883.

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance.

Das, S and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, Ashis K (2023) Impact of Bounding Media on the Attenuation Characteristics of Magnetostrictive Signal Obtained from Pipe Embedded in Soil and Sand. Journal of Nondestructive Evaluation, 42(3).

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals.

Dipali, Ranjit and Prasad, R K and Sahu, S K and Randhawa, N S (2023) Design and Optimization Study of Metal Recovery from Scrap NdFeB Magnets Using Response Surface Methodology. Industrial & Engineering Chemistry Research, 62(30). pp. 11948-11956.

Director, NML (2023) CSIR-NML Annual Report 2022-2023. CSIR-NML, Jamshedpur, Jamshedpur. ISBN 0972-4273

Director, NML (2023) Souvenir of One Week One Lab - CSIR-NML. In: Souvenir of OWOL-2023 CSIR-NML. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-150.

Dolzhenko, P and Odnobokova, M and Tikhonova, M and Kaibyshev, R and Chowdhury, S G and Belyakov, A (2023) Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing. Materials Characterization, 206(Part: A).

Eticha, Z G and Alex, T C and Olu, F E and Yimam, A and Alemayehu, E (2023) Effects of doping iron on the colouring properties of copper chromate pigment. Bulletin of Materials Science, 46(2).

Gautam, P and De, A K and Rao, M D and Sinha, I and Behera, C K and Singh, K K (2023) Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies. Environmental Science and Pollution Research.

Ghosh, M (2023) Effect of flue gas constituents on boiler tube failure of a captive power plant. Engineering Failure Analysis.

Ghosh, M (2023) Failure Investigation of Boiler Tube: A Root Cause Analysis. Journal of Failure Analysis & Prevention.

Ghosh, M and Mahato, B and Kumar, B Ravi (2023) Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis. Journal of Failure Analysis and Prevention, 23. pp. 2322-2330.

Guguloth, K and Roy, Nilima (2023) Creep life estimation of reformer alloy using 0-projection method- A neuro fuzzy approach. International Journal of Pressure Vessels and Piping, 203.

Gupta, N and Bhattacharya, P (2023) Microwave-plasma induced one-step synthesis of Ni(PO3)2 nanosphere-loaded bio-waste derived N, P co-doped carbon for an asymmetric supercapacitor with prolonged life. Journal of Materials Chemistry C, 11(39). pp. 13503-13517.

Gupta, N and Samajdar, S and Ghosh, Srabanti and Bhattacharya, P (2023) Development of octahedral shaped Zn2TiO4 loaded Ti3C2-TiO2 ternary composite with excellent photocatalytic efficiency. Inorganic Chemistry Communications, 160.

Halder, N and Anand, S and Datta, S and Das, A (2023) On Fabrication of Inconel 718 Slab by Wire Arc Additive Manufacturing: Study of Built Microstructure and Mechanical Properties. Arabian Journal for Science & Technology.

Husain, Md Murtuja and Halder, N and Meena, L K and Ghosh, M (2023) Evaluation of Microstructure, Mechanical Properties, Wear Resistance and Corrosion Behaviour of Friction Stir‑Processed AZ31B‑H24 Magnesium Alloy. Metallography, Microstructure & analysis.

Jain, Vipul and Kumar, Piyush and Bagui, Sumanta and Halder, C and Patra, Sudipta and Ghosh, Abhijit (2023) A comprehensive study on the through-process Goss texture evolution in Fe-3.78 wt.%Si grain-oriented electrical steel. Materials Chemistry and Physics, 309.

Jayaraj, J and Srinivasan, A and Arunchandran, C and Rajinikanth, V (2023) Corrosion and in vitro characteristics of cerium phosphate-based chemical conversion coating on AZ31 magnesium alloy. Applied Surface Science, 644.

Jena, P S M and Tripathy, S and Mahato, B and Paulose, N and Fernando, D.C and Sahu, J K (2023) Role of void nucleation at primary-gamma'/gamma interface on strain softening of nickel-base superalloy 720Li. Journal of Alloys and Compounds, 958.

Jha, Gaurav and Soren, S and Mehta, K D (2023) Assessment of the internal chemistry nexus of coke and biomass-based sinters. Sadhana-Academy Proceedings in Engineering Sciences, 48(4).

Jha, S K and Kumari, Alka and Modalavalasa, U B R and Singh, S K (2023) Nanostructure-induced inhibition of oxygen evolution and enhancement of methanol electrooxidation on engineered anodized brass. International Journal of Hydrogen Energy, 51 Part B. pp. 1186-1197.

Kaithwas, C K and Bairi, L R and Mozumder, Y H and Pradhan, S K and Mandal, S (2023) On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H. Materials and Corrosion / Werkstoffe und Korrosion.

Kancharla, H and Mandal, G K and Pradeep, K G and Singh, S S and Mondal, K (2023) Understanding the Formation Mechanism of Al-Rich Interfacial Layer during Galvanizing of Cu Pre-coated High-Strength Steel Sheet. Journal of Materials Engineering and Performance.

Kancharla, H and Mandal, G K and Prasad, N K and Vishwanath, K and Bhushan, B and Godbole, K and Singh, S S and Mondal, K (2023) Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel. Journal of Applied Electrochemistry.

Kar, Shubhada and Meena, L. K. and Srivastava, V. C. and Mandal, G. K. (2023) Microstructural, Mechanical, And Corrosion Behaviour of Ni–Fe‑Cr‑Al and Ni–Fe‑Cr‑Al‑Co Alloys. INDIAN INSTITUTE OF METALS.

Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals.

Kar, Shubhada and Srivastava, V C and Mandal, G K (2023) Low-density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. Journal of Alloys and Compounds, 963.

Karade, V C and Sutar, S S and Jang, J S and Gour, K S and Shin, S W and Suryawanshi, M P and Kamat, R K and Dongale, T D and Kim, J H and Yun, J H (2023) Unraveling the Effect of Compositional Ratios on the Kesterite Thin-Film Solar Cells Using Machine Learning Techniques. Crystals, 13(11).

Kiran, U R and Panchal, A and Kamal, S S K and Sahu, K K and Mishra, D and Nandy, T K and Nagesh, Ch R V S (2023) Microstructure and Mechanical Properties of Tungsten Heavy Alloy Prepared Using Tungsten Metal Powder Produced from Heavy Alloy Scrap. Defence Science Journal, 73(2). pp. 240-250.

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Ranjan, Manish and Kawasaki, M and Gubicza, Jeno (2023) Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy. International Journal of Plasticity, 169.

Kumar, Alok and Kumari, Sneha and Mustapha, K A and Chakladar, S and Chakravarty, S (2023) Geochemical characteristics of the Rajmahal coals in Dhulia North Block, Eastern India: implication to their utilization and environment. Environmental Geochemistry and Health, 40(10) SI. pp. 6967-6983.

Kumar, Amit and Guguloth, K and Pandey, S M and Fydrych, D and Sirohi, S and Pandey, C (2023) Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science.

Kumar, Amritesh and Sarma, Ritam and Bag, Swarup and Srivastava, V C and Kapil, Sajan (2023) Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer. Science and Technology of Welding and Joining, 28(9). pp. 914-922.

Kumar, Arun and Agarwal, Ashish and Kumar, A and Kumar, Sunil (2023) Prediction of hot metal temperature in a blast furnace iron-making process using multivariate data analysis and machine learning methodology. Metallurgical Research & Technology, 120(6).

Kumar, Arun and Kumar, Sunil and Kumar, Ashok (2023) Structural phase transformation in single-crystal Fe-Cr-Ni alloy during creep deformation using molecular dynamics simulation and regression-based machine learning methodology. Bulletin of Materials Science, 47(1).

Kumar, Ashish and Nirala , A and Singh, V P and Sahoo, Biraj K and Singh, R C and Chaudhary, R and Dewangan, Ashok K and Gaurav, G K and Klemes, J J and Liu, X H (2023) The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis. Journal of Cleaner Production, 398.

Kumar, Ashish and Singh, V P and Nirala , A and Singh, R C and Chaudhary, R and Mourad, A H I and Sahoo, Biraj K and Kumar , Deepak (2023) Influence of tool rotational speed on mechanical and corrosion behavior of friction stir processed AZ31/Al2O3 nanocomposite. Journal of Magnesium and Alloys, 11(7). pp. 2585-2599.

Kumar, M S and Sulthan, K R and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V and Chinthapudi, E and Basu, S and Thorat, B N (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. In: 74th Annual Indian Chemical Engineering Congress of Indian-Institute-of-Chemical-Engineers (CHEMCON), DEC 26-30, 2021, CSIR Inst Minerals & Mat Technol, Bhubaneswar, INDIA.

Kumar, M S and Yang, C H and Farooq, M U and Kavimani, V and Adesoji, A A (2023) Enhanced structural integrity of Laser Powder Bed Fusion based AlSi10Mg parts by attaining defect-free melt pool formations. Scientific Reports, 13(1).

Kumar, Rakesh (2023) In Retrospect: Some Peculiarities Observed in the Mechanical Activation of Ground-Granulated Blast Furnace Slag and Fly Ash. Transactions of the Indian Institute of Metals.

Kumar, Rakesh and Alex, T C (2023) Phase stability and role of mechanical activation in the chemical beneficiation of red mud. Journal of Thermal Analysis and Calorimetry, 148. pp. 9813-9827.

Kumar, Ranjeet and Gokhale, A and Varma, Anand and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Role of Nb (C, N) and Cr carbides on the fracture behavior of Super304H steel using in-situ tensile studies. Materials Letters, 351.

Kumar, Ranjeet and Halder, Prahlad and Amrithalingam, Murugaiyan and Yuvraj, N and Varma, A and Kumar, Y R and Neelakantan, S and Jain, Jayant (2023) Experimental and Numerical Analysis of Residual Stresses in Similar and Dissimilar Welds of T91 and Super304H Steel Tubes. Journal of Materials Engineering and Performance.

Kumar, Sunil and Nandi, Sukalpan and Pattanayek, S K and Madan, M and Kaushik, B and Kumar, R and Krishna, K Gopala (2023) Atomistic characterization of multi nano-crystal formation process in Fe-Cr-Ni alloy during directional solidification: Perspective to the additive manufacturing. Materials Chemistry and Physics, 308.

Kumar, Sunil and Sahu, Ranjan K (2023) Aluminum nanotubes as an efficient catalyst for hydrogen production via thermochemical water splitting: a reactive molecular dynamics simulation. Physical Chemistry Chemical Physics.

Kumar, Sunil and Sahu, Ranjan K (2023) Fe-Al core-shell structure as an efficient catalyst for dual hydrogen production and storage by thermochemical water splitting: A reactive molecular dynamic simulation. International Journal of Hydrogen Energy, 52 Part A. pp. 1498-1506.

Kumari, Aarti and Sahu, S K (2023) A comprehensive review on recycling of critical raw materials from spent neodymium iron boron (NdFeB) magnet. Separation and Purification Technology, 317.

Kumari, Ajita and Tripathy, Alok and Mandre, N R (2023) Artificial neural network-based sensitivity analysis and experimental investigation of liquid–solid fluidization technique for low-grade coal upgradation. JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, 44/2 (2.2). pp. 265-277.

Kumari, Ajita and Vasumathi, N and Vijaya Kumar, T V (2023) Statistical analysis and optimization studies on recovery of carbon from steel plant sludge. Materials Today: Proceedings.

Kumari, Beena and Madhukar, Anuradha and Sahney, Sangeeta (2023) A R&D productivity model to achieve self-sustainability for public funded/CSIR R&D laboratories, India. Internation Journal of Productivity and Performance Management, A head.

Kumari, Sneha and Roy, T and Chakladar, S and Kumar, Alok and Arif, Md and Mohanty, Ashok and Kundu, Rajen and Chakravarty, S (2023) Distribution, mode of occurrence, and significance of rare-earth elements in coal from Samaleswari open cast coal blocks, Odisha, India with their provenance and paleodepositional environment. Environmental Earth Sciences, 82(5).

Kurusta, Tamas and Mucsi, G and Kumar, Sanjay and Kristaly, Ferenc (2023) Carbon dioxide sequestration by mechanical activation of Linz-Donawitz steel slag; the effect of water on CO2 capture. Fuel, 352.

Kushwaha, A and Sharma, A and Bhatt, B B and Mukhopadhyay, Amartya and Gupta, D (2023) Inkjet-Printed Graphene-Modified Aluminum Current Collector for High-Voltage Lithium-Ion Battery. ACS Applied Energy Materials.

Mahanta, C R and Sahoo, P R and Mohanta, M K and Rath, R K and Dey, Shobhana and Tripathy, Sunil Kumar and Prasad, J and Venkatesh, Akella Satya (2023) Mineralogical Characteristics of Hematitic Iron Ore: A Geometallurgical Study on Ore from Eastern India. Minerals, 13(9).

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Discrete wavelet transforms analysis of vibration signals for correlating tool wear in diamond turning of additive manufactured Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B- Journal of Engineering Manufacture.

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) In-process monitoring of the ultraprecision machining process with convolution neural networks. International Journal of Computer Integrated Manufacturing.

Manjunath, K and Tewary, S and Khatri, N and Cheng, K (2023) Monitoring of machining process anomalies in diamond turning of Ti6Al4V alloy using transfer learning-based algorithms. Computers& Industrial Engineering , 182.

Mayuri, S and Jha, Niki S and Jha, S K (2023) Curcumin-capped gold nanorods as optical sensing platform for sequence-specific detection of DNA based on their self-assembly. International Journal of Biological Macromolecules, 253(Part 3).

Meena, L K and Seshagiri, R and Singh, Raghuvir (2023) Corrosion behavior of strontium-modified Al-12Si cast alloys in flowing and stagnant chloride-containing media. Journal of Alloys and Compounds, 962.

Meshram, Pratima and Abhilash, (2023) Material Recycling: Unearthing Metals from Anthropogenic and Industrial Resources. In: New Horizons in Metallurgy, Materials and Manufacturing. Springer, India, pp. 69-89. ISBN 978-981-19-5569-3

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201.

Mohana Rao, Andavarapu and Vidyadhar, A and Prasad, Ranjit and Sahoo, M (2023) Efficacy of Pilot Scale Batac Jig on LVC Coal Utilization for Coke Making. Transactions of the Indian Institute of Metals, 76(6). pp. 1553-1561.

Mohanty, P K and Jayanthu, S and Chakladar, S and Chakravarty, S (2023) An investigation into the effect of various parameters on oil agglomeration process of coal fines. International Journal of Coal Preparation and Utilization.

Murugaiyan, Premkumar and Mitra, Amitava and Patro, A K and Roy, Rajat K and Panda, Ashis K (2023) Magnetostriction of Fe-rich FeSiB(P)NbCu amorphous and nanocrystalline soft-magnetic alloys. Journal of Alloys and Compounds, 960.

Murugesan, A P and Mandal, M and Poddar, Palash and Bagui, Sumanta (2023) Effect of Alloying Elements on the Dry Sliding Wear Characteristics of Gravity-Cast Mg-Sn Based Alloys. Journal of Materials Engineering and Performance.

Nana, Achile and Singla, Rashmi and Epey, Noela and Kassem, N N and Sakue, E N and Rodrigue, C K and Kamseu, E and Kumar, Sanjay and Leonelli, C (2023) Design and characterization of Cameroonian pegmatite-calcined clay binary mortars via geopolymerisation. Journal of Building Engineering, 76.

Paidi, A K and Sharma, A and Paidi, V K and Illa, M P and Lee , K S and Lee, S S and Ahu, D and Mukhopadhyay, Amartya (2023) Na2ZrFe(PO4)(3)-A Rhombohedral NASICON-Structured Material: Synthesis, Structure and Na-Intercalation Behavior. Inorganic Chemistry, 62(10). pp. 4124-4135.

Panda, Ashis K and Anurag, Kumar and Das, S and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, A (2023) Impact of stress-induced anisotropic modifications on magneto-impedance behavior of rapidly quenched CoFe-based microwires. Journal of Alloys and Compounds, 960.

Panda, S and Devi, N and Sahu, S K (2023) Recent trends in eco-sustainable recycling of energy-critical elements from low-grade and secondary resources. Environmental Science and Pollution Research.

Patel, S K and Dubey, P and Roshan, R and Behera, A (2023) Elastic and transformation behavior of equiatomic NiTi shape memory alloys fabricated at different sintering temperatures. Materials Today Communications, 37.

Polimera, Srihith and Gali, A and Nath, Susanta Kumar and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J (2023) Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler. Polymer Composites, 44(10). pp. 6454-6466.

Polimera, Srihith and Gali , A and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J and Nath, Susanta Kumar (2023) Thermo-mechanical property enhancement of rigid polyurethane foam composite using low-cost, environment-friendly fly ash over silica particles. Journal of Vinyl and Additive Technology, 30(1). pp. 156-171.

Pradhan, S and Anuraag, N S and Shaw, S K and Gangwar, A and Rao, K S and Sharma, A and Mandal, B P and Prasad, N K (2023) MnNCN@C nanocomposite as an anode for Li-ion battery. Materials Science Engineering B-Advanced Functional Solid-State Materials, 298.

Pramanick, A K (2023) Multi-component Zr based biocompatible alloys with modulus ≤50 GPa and density ~2.8 gm/cm3 for biomedical application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanik, Swati and Kumari, Aarti and Sinha, Manish K and Munshi, B and Sahu, S K (2023) Valorization of phosphor powder of waste fluorescent tubes with an emphasis on the recovery of terbium oxide (Tb4O7). Separation and Purification Technology, 322.

Pratihar, B and Jana, Animesh and Biswas, S and De, Srishendu (2023) Pd nanoparticles-decorated borophene nanosheets for intrinsic polarization-induced visible light photocatalysis. Catalysis Science & Technology, 13(5). pp. 1558-1570.

Qi, Chongchong and Benson, Craig H (2023) Managing Mining and Minerals Processing Wastes_chapter9. In: Managing Mining and Minerals Processing Wastes Concepts, Design, and Applications. Elsevier, Central South University Press, pp. 01-30. ISBN 978-0-323-91283-9

Raji, M A and Baba, A A and Abhilash, (2023) Uranium extraction from sulphuric acid leach liquor by Cyanex®272 as intermediate in nuclear fuel cell. Journal of Radioanalytical and Nuclear Chemistry, 332(11). pp. 4471-4476.

Ramesh, Surla and Gautam, S K and Roy, Himadri and Lohar, A K and Samanta, S K and Anand, A and Mukerjee, D and Kumar, Shivam (2023) Structure-Property Correlation of Gravity Die-Cast and Rheocast Al-Mg-Sc-Zr in situ Nano-TiB2 Composite. International Journal of Metalcasting.

Rao, A U and Tiwari, S K and Kharb, A S and Chawla, V and Dubey, Paritosh and Goyat, M S and Saxena, V and Chawla, A K (2023) Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings. Physica Scripta, 98(12).

Rao, M D and Meshram, Pratima and Abhilash and Singh, K K (2023) Validation of Bromide Leaching through Response Surface Methodology and Separation of Gold from Waste Printed Circuit Boards. Minerals, 13(4).

Rao, M D and Meshram, R B and Singh, K K and Morrison, C A and Love, J B (2023) Life cycle analysis on sequential recovery of copper and gold from waste printed circuit boards. Waste Management, 171. pp. 621-627.

Rout, S and Abhilash, and Meshram, Pratima and Zhang, PT (2023) A Comprehensive Review on Occurrence and Processing of Phosphate Rock Based Resources- Focus on REEs. Mineral Processing and Extractive Metallurgy Review.

Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218.

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S. N. and Sagar, Sarmishtha (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance. (In Press)

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science. pp. 3157-3185.

Sai Kumar, M and K, Rashid Sulthan and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V (2023) Flotation of Low-Grade Graphite Ore Using Collector Derived from Low-Density Polyethylene Waste. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering,.

Saida, S and Kumar, B and Roy, G G and Chakravarty, S and Kundu, T K (2023) Synthesis of TiO2 from the Low-Grade Ilmenite Using the Mechanical Activation and Reductive Pressure Leaching in Low-Concentration H2SO4. Mining Metallurgy & Exploration.

Sankar, T K and Abhilash, and Meshram, Pratima (2023) Environmental Impact Assessment in the Entire Life Cycle of Lithium-Ion Batteries. Reviews of Environmental Contamination and Toxicology, 262(1).

Sarkar, A and Panda, Ashis K and Mitra, A and Mallick, A B (2023) Tuneable magnetic properties of single-domain oxidation-resistant core/shell FeCo/Cu nanostructures. Journal of Materials Science-Materials in Electronics, 34(2).

Sen, Arindam and Kumar, Sudip and Kundu, Rajen (2023) Recycling of Cathode Material from Spent Lithium-Ion Batteries for Energy Application. In: International Conference on “Recent Advances in Materials Chemistry and Catalysis” , 1-3 March, 2023, Department of Chemistry- Dibrugarh University ,Dibrugarh 786004, Assam (India).

Shaw, S K and Sharma, A and Kailashiya, J and Gupta, Santosh K and Meena, Sher Singh and Dash, D and Maiti, P and Prasad, N K (2023) Mesoporous Fe3O4 nanoparticle: A prospective nano heat generator for thermo-therapeutic cancer treatment modality. Journal of Magnetism and Magnetic Materials, 578.

Shiva, V and Christopher, J and Veerababu, J and Parthasarathi, N L and Kannan, R and Nagesha, A and Vasudevan, M (2023) Effect of maximum applied cyclic stress on fretting fatigue stress distribution of flat-on-flat modified 9Cr-1Mo steel contact: Finite element analysis. Nuclear Engineering and Design, 417.

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952.

Shivam, V and Kar, S and Mandal, G K and Srivastava, V C (2023) Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. Journal of Alloys and Compounds, 963.

Shivam, V and Kar, Shubhada and Mandal, G K and Srivastava, V C and Mukhopadhyay, N K (2023) Microstructural Evolution and Mechanical Properties of Fe-Containing High and Medium Entropy Alloys: Recent Advances and Future Prospects. Transactions of the Indian Institute of Metals.

Singh, Komal and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2023) Enhanced thermoelectric performance of mechanically hard nano-crystalline-sputtered SnSe thin film compared to the bulk of SnSe. Journal of Materials Science: Materials in Electronics, 34(13).

Singh, Shivangini and Mandal, Manas and Mishra, Trilochan and Angayarkanni, A and Veldurthi, N K and Pati, S S (2023) Facile Synthesis of Citric Acid Functionalized Fe3O4@Activated Carbon Magnetic Nanocomposite for Efficient Adsorption of Brilliant Green Dye from Wastewater. Chemistryselect, 8(38).

Sinha, Manish K and Tanvar, H and Sahu, S K and Mishra, B (2023) A Review on Recovery of Terbium from Primary and Secondary Resources: Current State and Future Perspective. Mineral Processing and Extractive Metallurgy Review.

Sundara Bharathy, R and Venugopalan, T and Ghosh, M (2023) Effect of Precipitation Characteristics on Mechanical Properties and Stretch Flangeability of Nano‑Dispersion Strengthened High Strength Ferritic Steel. Metallography, Microstructure & Analysis.

Szabo, R and Kristaly, Ferenc and Nagy, S and Singla, Rashmi and Mucsi, Gabor and Kumar, Sanjay (2023) Reaction, structure and properties of eco-friendly geopolymer cement derived from mechanically activated pumice. Ceramics International, 49(4). pp. 6756-6763.

Vasumathi, N and Chennakesavulu, K and Cassandra Austen, I and Kumari, Ajita and Kalidoss, J and Sukumaran Suseelamma, S and Vijaya Kumar, T V and Gopalkrishna, S J (2023) Development of a novel biocollector for flotation of low grade graphite ore. Energy sources, Part A: Recovery, utilization, and environmental effects (2.9).

Vasumathi, N and K, Chennakesavulu and I, Cassandra Austen and Madhira, Sai K and Vijaya Kumar, T V and Kumari, Ajita (2023) Study on Flotation of Sillimanite Using Plant-Based Collector. Sustainable Chemical, Mineral and Material Processing: Lecture Notes in Mechanical Engineering.

Vasumathi, N and Sai Kumar, M and Abhishek, D S V and Vijaya Kumar, T V and Gopalkrishna, S.J. (2023) A Comparative Study on Flotation of Coal Using Eco-Friendly Single Reagent and Conventional Dual-Reagent System. Sustainable Chemical, Mineral and Material Processing:Lecture Notes in Mechanical Engineering.

Vasumathi, N and Sarjekar, A and Chandrayan, H and Chennakesavulu, K and Reddy, G R and Kumar, T V Vijaya and El-Gendy, N S and Gopalakrishna, S J (2023) A Mini Review on Flotation Techniques and Reagents Used in Graphite Beneficiation. International Journal of Chemical Engineering, 2023.

Verma, A K and Johari, K K and Dubey, Paritosh and Candolfi, C and Lenoir, B and Walia, S and Dhakate, S R and Gahtori, B (2023) Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy. Journal of Alloys and Compounds, 947.

Vishwakarma, Jaydeep and Rajpurohit, R S and Rao, G S and Chattopadhyay, K and Srinivas , N C S (2023) Low cycle fatigue behavior of additive manufactured maraging steel: Influence of build orientation and heat treatment. Materials Letters, 350.