Items where Year is 2014

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | M | N | P | R | S | V
Number of items: 200.

A

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.069). pp. 559-566.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Ahmad, Khalil and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 23-27.

Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Zaid, Rajeh and Singh, J K and Singh, D D N (2014) Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions. Corrosion, 70(1) (IF-2.908). pp. 74-86.

Alex, T C (2014) An insight into the changes in the thermal analysis curves of boehmite with mechanical activation. Journal of Thermal Analysis and Calorimetry, 117 (IF-2.206). pp. 163-171.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 1. Planetary milling. Powder Technology, 264 (IF-2.269). pp. 105-113.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 2. Attrition milling. Powder Technology, 264 (IF-2.269). pp. 229-235.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Towards ambient pressure leaching of boehmite through mechanical activation. Hydrometallurgy, 144 (IF-2.224). pp. 99-106.

Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Al-Zaid, Rajeh and Singh, D D N (2014) Effect of Simulated Concrete Pore Solution Chemistry, Chloride Ions, and Temperature on Passive Layer Formed on Steel Reinforcement. ACI Materials Journal, 111/4 (IF-1.123). pp. 411-421.

Ali, F and Scudino, S and Anwar, M S and Shahid, R N and Srivastava, V C and Uhlenwinkel, V and Stoica, M and Vaughan, G and Eckert, J (2014) Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. Journal of Alloys and Compounds, 607 (IF-2.407). pp. 274-279.

Ali, Tayyab and Venkataraman, A (2014) Synthesis and characterization of polyaniline coated functionalized g-Fe O nanoparticles. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 35-39.

Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .

B

Balusamy, T and Venkateswarlu, M and Murthy, K S N and Vijayanand, S and Sankara Narayanan, T S N (2014) Effect of Surface Mechanical Attrition Treatment (SMAT) on the Surface and Electrochemical Characteristics of Pb-Sn Alloy. International Journal of Electrochemical Science, 9(1) (IF-1.956). pp. 96-108.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Barman, H and Hamada, A S and Sahu, T and Mahato, B and Talonen, J and Shee, S K and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2014) A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel. Metallurgical and Materials Transaction A, 45A(4) (IF-1.730). pp. 1937-1952.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Basavaraja, C and Kumar, K B Satish and Vishnuvardhan, T K (2014) Hony comb patterns and DC conductivity of cellulose multiwalled carbon nanotube composite films. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 209-215.

Bhagat, R P and Nayak, B and Bhattacharyya, K K and Goswami, M C (2014) Mineralogy of iron ore pellet and its correlation with crushing strength. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 117-123.

Bhaskar Raju, G and Parthiban, V and Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2014) Separation of sillimanite from beach sands contaminated with shell. International Journal of Scientific Engineering and Technology, 3(4) (IF-1.852). pp. 320-325.

Bhattacharya, S and Dhar, S and Das, S K and Ganguly, Ranjan and Webster, T J and Nayar, S (2014) Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity. International Journal of Nanomedicine, 9 (IF-4.195). pp. 1287-1298.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

C

Chakrabarti, Kaushik and Sarkar, B and Ashok, V D and Das, K and Chaudhuri, S S and Mitra, A and De, S K (2014) Exchange bias effect in BiFeO3-NiO nanocomposite. Journal of Applied Physics, 115(1) (IF-2.185). 013906.

Chakraborty, J (2014) Diffraction stress analysis of fiber textured Ti thin films undergoing hcp - fcc phase transformation. International Confrence on Residual Stresses 9 (ICRS 9), 768-769 . pp. 257-263.

Chakraborty, J and Maiti, Tias and Ghosh, M and Das, Goutam and Chandra, Sanjay (2014) Cementite dissolution in cold drawn pearlitic steel wires: role of dislocations. International Confrence on Residual Stresses 9 (ICRS9), 768-769 . pp. 304-312.

Chakravarty, S and Mohanty, Ashok and Ghosh, B and Tarafder, Mita and Aggarwal, S G and Gupta, P K and Prabhat, K (2014) Proficiency Testing in Chemical Analysis of Iron Ore: Comparison of Statistical Methods for Outlier Rejection. Mapan-Journal of Metrology Society of India, 29(2) (IF-0.477). pp. 87-95.

Chatterjee, Partho Pratim (2014) Embryonic improvements of solar photovoltaics. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 67-72.

Chennakesavulu, K and Sreedevi, P and Raviatul Basaria, M and Ramanjaneya Reddy, G and Bhaskar Raju, G and Prabhakar, S and Sasipraba, T (2014) Thermal decomposition mechanism of p-tert-butyl-calix[n]arenes. Thermochimica Acta (2014) , 575 (IF-2.105). pp. 55-63.

Cherian, Antony (2014) A non-invasive technique for compositional analysis of coal. Masters thesis, NIT Trichy.

Cherian, Antony (2014) A Non-Invasive Technique for Compositional Analysis of Coal. Masters thesis, NIT Trichy.

Choi, Seo-Young and Nguyen, Viet Tu and Lee, Jae-chun and Kang, Ho and Pandey, B D (2014) Liquid–liquid extraction of Cd(II) from pure and Ni/Cd acidic chloride media using Cyanex 921: A selective treatment of hazardous leachate of spent Ni–Cd batteries. Journal of Hazardous Materials, 278 (IF-4.331). pp. 258-266.

Choubey, Pankaj K and Jha, Manis K and Gupta, Divika and Jeong, Jinki and Lee, Jae-chun (2014) Recovery of rare metal indium (In) from discarded LCD monitors. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Choudhary, B N and Roy, B N and Vaish, A K and Singh, S D (2014) Smelting of sponge iron fines for the production of steel grade iron. Journal of Metallurgy and Materials Science, 15(2) (NON-SCI). pp. 107-116.

Chowdhury, A and Bijalwan, P K and Sahu, Ranjan K (2014) Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films. Applied Surface Science, 289 (IF-2.538). pp. 430-436.

Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur).

D

Das, Arpan (2014) Magnetic properties of cyclically deformed austenite. Journal of Magnetism and Magnetic Materials, 361 (IF-2.002). pp. 232-242.

Das, Arpan (2014) Slip System Activity During Cyclic Plasticity. Metallurgical and Materials Transactions A, 45 A (7) (IF-1.730). pp. 2927-2930.

Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009.

Das, Arpan and Roy, Nilima and Ray, Ashok K (2014) Stress induced creep cavity. Materials Science and Engineering A, 598 (IF-2.409). pp. 28-33.

Das, C R and Albert, S K and Laha, K and Swaminathan, J and Ravi, S and Bhaduri, A K and Murty, B S and Mayer, P (2014) Influence of Coincidence Site Lattice Boundary on Creep Resistance of P91 Steel Weldments. Procedia Engineering, 86 (NIF-0.629). pp. 80-87.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Das, T K and Mandal, S K and Panda, A K and Bhattacharya, S and Banerji, Pallab and Mitra, A (2014) Giant Magnetoimpedance (GMI) Effect and Field Sensitivity of Ferrofluid Coated Co66Fe2Si13B15Cr4 Soft Magnetic Amorphous Microwire. Physics Procedia, 54 (NIF-0.629). pp. 16-22.

Das, T K and Mitra, A and Mandal, S K and Roy, Rajat K and Banerji, Pallab and Panda, A K (2014) Parametric controls on giant magnetoimpedance (GMI) behaviour of CoFeSiBCr amorphous wires for prospective sensor applications. Sensors and Actuators A-Physical , 220 (IF-1.841). pp. 382-387.

Das, T K and Mitra, A and Roy, Rajat K and Panda, A K and Mandal, S K (2014) Development of GMI Based Sensing Device for Identification of Magnetic Phases in Steel. In: All India Seminar on Instrumentation and Process Control, April 24 - 25, 2014, Jamshedpur.

Das, T K and Panda, A K and Mitra, A and Banerji, Pallab and Mandal, S K (2014) Rapidly solidified CoFeSiBCr amorphous wire : From manipulation to giant magnetoimpedance sensor applications. 195 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 195-202.

Das, T K and Panda, A K and Mitra, A and Roy, Rajat K and Mandal, S K (2014) Giant Magnetoimpedance Sensor for Structural Integrity Assessment of Engineering Components. In: National Seminar and Exhibition on Non-Destructive Evaluation, NDE 2014, December 3 - 5, 2014, Pune.

Datta, A K (2014) Low cycle fatigue life prediction of thin stiffened plates under repetitive stresses. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

Datta, A K (2014) Responses of stiffened plates with varying depth of stiffeners under uniform lateral loads. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

De, J and Bhattacharjee, S and Dhar, S and Acharyya, S K and Gupta, S K and Tarafder, S (2014) Finite Element Simulation of Multi-Axial Low Cycle Fatigue of Material SA333. Procedia Engineering, 86 (NIF-0.629). pp. 158-165.

De, Subhabrata and Bhattacharya, J (2014) Dependence of bioremediation performance of acid mine drainage on substrate characteristics. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 203-207.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Development of novel Al-alloy (Al-5Mg)/10Wt.%TiB 2 metal matrix composites by in-situ reaction synthesis. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 179-186.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Wear behavior of Al-Alloy (Al-5Mg) in-situ reinforced TiB particulate. 217 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 217-222.

Dey, Shobhana and Mohanta, M K and Goswami, M C and Pani, Santosh (2014) Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making. Journal of Minerals and Materials Characterization and Engineering, 2 . pp. 513-521.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar (2014) Study of interactions of frother blends and its effect on coal flotation. Powder Technology, 260 (IF-2.269). pp. 78-83.

Dhal, B and Abhilash, and Pandey, B D (2014) Microbial sorption studies for removal of trivalent chromium from model tanning bath. Advanced Materials Research, 828 . pp. 33-44.

Director, NML (2014) Annual Report 2013-2014. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2014) Director's Desk - 65th RC Meeting of CSIR-NML (English Version). CSIR-NML, Jamshedpur.

Divya, M and Das, C R and Albert, S K and Goyal, Sunil and Ganesh, P and Kaul, R and Swaminathan, J and Murty, B S and Kukreja, L M and Bhaduri, A K (2014) Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613 (IF-2.409). pp. 148-158.

Dutta, Samik and Barat, K and Das, Arpan and Das, Swapan K and Shukla, A K and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47 (IF-1.526). pp. 130-144.

E

Esfahani, Hamid Reza and Mirsalehi, Seyyed Ehsan (2014) Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 231-238.

G

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Ghosh, Arpita and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Ghosh, Ishita and Das, Suchandan K and Chakraborty, N (2014) An artificial neural network model to characterize porosity defects during solidification of A356 aluminum alloy. Neural Computing and Applications, 25 (IF-1.763). pp. 653-662.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863.

Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201.

Goswami, B and Raj, A and Srivastava, S C and Ray, Ashok K (2014) Vanadium in industrial traditions and innovations. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 149-161.

Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206.

Guguloth, K and Swaminathan, J and Ghosh, R N (2014) Creep life predicition of P91 Steel from stress relaxation tests. In: ECCC Creep & Fracture 2014, May 5-7, 2014, Rome, Italy.

Guha, Avijit and Nayar, S (2014) Low-Temperature Biomimetic Synthesis of beta-Tricalcium Phosphate by Altering pH. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 44(6) (IF-0.518). pp. 789-792.

H

Hung Ha, Vinh and Lee, Jae-chun and Huyunh, Trung Hai and Jeong, Jinki and Pandey, B D (2014) Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone. Hydrometallurgy, 149 (IF-2.224). pp. 118-126.

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2014) Time-dependent variation of the electrochemical impedance for thermo-mechanically treated versus plain low alloy steel rebars in contact with simulated concrete pore solution. Construction and Building Materials, 73 (IF-2.265). pp. 283-288.

J

Jha, Animesh and Srikanth, S (2014) Measurement of non-isothermal oxygen potentials in a Cu–Fe–Ca–S–O liquid during reduction of chalcopyrite in lime and carbon mixtures. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123(1) (IF-0.690). pp. 21-28.

Jha, Manis K and Gupta, Divika and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2014) Solvent extraction of copper, zinc, cadmium and nickel from sulfate solution in mixer settler unit (MSU). Separation and Purification Technology, 122 (IF-3.065). pp. 119-127.

Jha, Manis K and Gupta, Divika and Lee, Jae-Chun and Kumar, Vinay and Jeong, Jinki (2014) Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142 (IF-2.224). pp. 60-69.

0140NF2013 (2014) A process for the recovery of rare earth metals yttrium, lanthanum, terbium & europium from scrap fluorescence tube. .

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Joseph, Kitheri and Kutty, K V Govindan and Goswami, M C and Rao, P R Vasudeva (2014) Viscosity and crystallization mechanism of cesium loaded iron phosphate glasses. Thermochimica Acta, 587 (IF-2.105). pp. 42-47.

K

Kalinkin, A M and Kumar, S and Gurevich , B I and Kalinkina, E V and Tyukavkina, V V (2014) Synthesis of geopolymer materials based on slags of nonferrous metallurgy with the use of mechanoactivation. Glass Physics and Chemistry, 40(1) (IF-0.532). pp. 26-30.

Kalpana, Y and Roy, S and Alka, (2014) Evaluation of plant extracts as corrosion inhibitors for Cu-alloys in river water. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 59-66.

Kar, Sujoy and Suman, Swati and Sivaprasad, S and Chaudhuri, Atanu and Bhattacharjee, A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy,Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A, 610 (IF-2.409). pp. 171-180.

Karmakar, A and Sivaprasad, S and Kundu, S and Chakrabarti, D (2014) Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Metallurgical and Materials Transactions A, 45A(4) (IF-1.730). pp. 1659-1664.

Karmakar, A and Sivaprasad, S and Nath, S K and Misra, R D K and Chakrabarti, D (2014) Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel. Metallurgical and Materials Transactions A, 45A(5) (IF-1.730). pp. 2466-2479.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) An overview on different processes for recovery of valuable metals from tungsten carbide scrap. In: International Conference on Nonferrous Minerals and Metals (ICNFMM), July 2014, Nagpur.

Kavitha, C and Ravichandran, K and Sankara Narayanan, T S N (2014) Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel. Transactions of the Institute of Metal Finishing, 92(3) (IF-0.747). pp. 161-168.

Kavitha, C and Sankara Narayanan, T S N and Ravichandran, K and Park, I S and Lee, Min Ho (2014) Deposition of zinc-zinc phosphate composite coatings on steel by cathodic electrochemical treatment. Journal of Coatings Technology and Research, 11(3) (IF- 1.280). pp. 431-442.

Khalilahmada, and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 173-177.

Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101.

Kumar, A and Chacko, Z E and Malathi, M and Godiwalla, K M and Ajmani, S K and Ranganathan, S (2014) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85(5) (IF-1.023). pp. 927-934.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Kumar, Sanjay and Kumar, Rakesh (2014) Geopolymer : Cement for low carbon economy. The Indian Concrete Journal, 88(7) . pp. 29-37.

Kumar, Vinay and Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Lee, J Y (2014) Recovery of rare earth metals (REMs) from primary and secondary resources: a review. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumar, Vinod and Kumari , Anjan and Jha, Manis K and Vidyadhar, A and Soni, B K (2014) Recycling of valuable metals from poly cracker ash of printed circuit boards (PCBS) by physical beneficiation and hydrometallurgical treatment. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2014) Extractive separation of La and Nd using Ionic Liquid as extractant. In: 18th International Conference on Non-ferrous Minerals & Metals -2014, 11-12 July, 2014, Nagpur.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2014) A neural network model for quantitative prediction of oxide scale in water walls of an operating Indian coal fired boiler. Research and Review in Electrochemistry, 5(6) . pp. 155-168.

Kumari, Anjan and Kumari, Archana and Jha, Manis K and Kumar, Vinod and Singh, R P and Yoo, Kyoungkeun (2014) Copper recovery from small devices populated on waste printed circuit boards. Journal of Metallurgy and Materials Science,, 56(1) (NON-SCI). pp. 41-51.

Kurniawan, M and Roy, Rajat K and Panda, A K and Greve, D W and Ohodnicki, P R and McHenry, Michael E (2014) Interplay of stress, temperature, and giant magnetoimpedance in amorphous soft magnets. Applied Physics Letters, 105 (22) (IF-3515). p. 222407.

M

Madge, S V and Caron, A and Gralla, R and Wilde, G and Mishra, Suman K (2014) Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47 (IF-1.696). pp. 6-10.

Maheswari, N and Ghosh Chowdhury, S and Kumar, K C Hari and Sankaran, S (2014) Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels. Materials Science and Engineering A, 600 (IF- 2.409). pp. 12-20.

Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2) . pp. 101-108.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2 . pp. 227-235.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Mazinan , Vahid and Nosrati , Hassan (2014) Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol gel process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 29-34.

Mazinani, Vahid (2014) Effect of pH on SiC nanopowder synthesized by sol-gel method. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 143-147.

Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.

Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayer’s Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Metya, Avijit Kr and Palit Sagar, S and Ghosh Chowdhury, S (2014) Evaluation of Crystallographic Texture in SS316L Steel by Ultrasonic Signal Analysis. In: National Conference on Nondestructive Evaluation (NDE-2014), 04-06 Dec 2014, Pune.

Mishra, Aadarsh (2014) The films of tin sulphide for use in thin film solar cell devices. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 73-76.

Mishra, Suman K and Bhople, A and Paswan, S (2014) Microstructure, hardness, toughness and oxidation resistance of Al2O3-ZrB2 composite with different Ti percentages prepared by in-situ SHS dynamic compaction. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 7-12.

Mishra, Suman K and Gokuul, V and Paswan, S (2014) Alumina-titanium diboride in situ composite by self-propagating high-temperature synthesis (SHS) dynamic compaction: Effect of compaction pressure during synthesis. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 19-24.

Mishra, Suman K and Shravan Kumar, K and Bysakh, S and Sreemany, M and Pathak, L C (2014) Investigation of interface, microstructure, and mechanical properties of layered thermal barrier coatings of lanthanum zirconate and YSZ deposited by EB-PVD process. Surface and Interface Analysis, 46(7) (IF-1.393). pp. 449-456.

Mishra, Swati and Nayar, S (2014) Protein-polymer Matrix Mediated Synthesis of Silver Nanoparticles. Nanobiomedicine, 1(3) . pp. 1-5.

Mishra, T and Wang, Lei and Hahn, Robert and Schmuki, Patrik (2014) In-situ Cr doped anodized TiO2 nanotubes with increased photocurrent response. Electrochimica Acta, 132 (IF-4.086). pp. 410-415.

Mucsi, G and Molnar, Zoltan and Kumar, Sanjay (2014) Geopolymerisation of Mechanically Activated Lignite and Brown Coal Fly Ash. Acta Physica Polonica A, 126 (IF-0.604). pp. 994-998.

Mucsi, G and Molnar, Zoltan and Racz, Adam and Faitli, Jozsef and Gombkoto, Imre and Raczkevi, Balazs and Kumar, Sanjay (2014) High energy density milling as a tool for improving the properties of fly ash based geopolymer. In: XXVI International Mineral Processing Congress (IMPC) 2014 Proceedings, October 20-24, 2014, Santiago, Chile.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Murthy, G V S and Das, Swapan K and Ravi Kumar, B (2014) Comprehensive Microstructural Characterization of γ′ in a Nimonic Alloy Using Ultrasonic Velocity Measurements. Metallography, Microstructure, and Analysis, 3(4) . pp. 328-335.

N

Nath, S K and Kumar, Sanjay and Kumar, Rakesh (2014) Effect of mechanical activation on cordierite synthesis through solid-state sintering method. Bulletin of Material Science, 37(6) (IF-0.870). pp. 1221-1226.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Nayak, B and Halbach, P and Pracejus, B and Münch, U (2014) Massive sulfides of Mount Jourdanne along the super-slow spreading Southwest Indian Ridge and their genesis. Ore Geology Reviews, 63 (IF-3.383). pp. 115-128.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2014) Selective recovery of cobalt, nickel and lithium from sulfate leachate of cathode scrap of Li-ion batteries using liquid-liquid extraction. Metals and Materials International, 20(2) (IF-1.223). pp. 357-365.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2014) Neuro-optimal control of an unmanned helicopter. Journal of Defence Modelling and Simulation, 11(1) (IF-). pp. 5-18.

P

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Palit Sagar, S (2014) Non-linear ultrasonic for structural damage assessment: Approach at CSIR-National Metallurgical Laboratory. In: Workshop on current and future trends of Non-linear ultrasonic technique for NDE, 21-24 Oct, 2014, Seoul, Korea.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2014) Leaching of rare earth metals (REMs) from Korean monazite concentrate. Journal of Industrial and Engineering Chemistry, 20(4) (IF-2.063). pp. 2035-2042.

Panindre, Anup M and Ranjan, Nitish and Sahu, Rina (2014) Reclaiming iron from solid wastes via Romelt process. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 163-172.

Parmar, Kavita and Bhattacharjee, S (2014) Studies on Pb(II) and Cd(II) adsorption by Fe(II) and Fe(III) silicate precipitation tubes in aqueous medium. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 125-135.

Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.

Paswan, Dayanand and Vaish, A K and Singh, S D and Ghorai, S and Malathi, M and Prasad, S and Minj, R K (2014) Production of Alloy Cast Iron from Multi–Metallic Magnetite Ore of Nagaland. Steel World 2013, 19/11 . pp. 36-38.

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Pathak, Arvind and Kumar, Sanjay and Jha, Vinay Kumar (2014) Development of Building Material from Geopolymerization of Construction and Demolition Waste (CDW). Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 133-137.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished)

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2014) Chemical beneficiation of Hingula coal. Journal of Metallurgy and Materials Science, 56(3) . pp. 173-177.

R

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Damage Analysis of Service Exposed Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 201-216.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Performance and Life Assessment of Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 217-230.

Raj, A and Goswami, B and Ray, Ashok K (2014) Creep and Fatigue Behavior in Micro-alloyed Steels - A Review. High Temperature Materials and Processes, 33(1) (IF-0.356). pp. 1-12.

Raji, K (2014) Influence of density on Al-Cu composition during compaction process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 53-57.

Randhawa, N S and Dwivedi, A D and Prajapati, S and Jana, R K (2014) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. In: National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problem and Solutions (LGO-2013), 22-23 January, 2013, CSIR-NML, Jamshedpur.

Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.

Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.

Randhawa, N S and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM), 12-15 November 2014, College of Engineering, Pune (COEP).

Randhawa, N S and Yelne, Payal M and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2014) Recovery of metals from spent nickel-cadmium (Ni-Cd) battery by leaching-electrowining process. In: 18th Int. Conf. on non-ferrous Met. 2014, 11-12 July 2014, Nagpur (India).

0094NF2014 (2014) An improved process for the pyrolysis of depopulated printed circuit boards (PCBs) of e-waste. 0094NF2014.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising - 3. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 77-91.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising-2. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 1-14.

Ray, Ashok K and Roy, Nilima and Matwa, M and Davuluri, A and Kumari, A and Kumar, P and Mundhada, D and Kaushal, V and Roy, B N (2014) Uncertainty in Damage Assessment and Remaining Life Prediction of Engineering Materials Used In Petrochemical Industry. Petroleum & Environmental Biotechnology, 5(4) . pp. 1-16.

Roy, A and Manna, I and Chattoraj, I (2014) Anomalies in hydrogen enhanced fatigue of a high strength steel. International Journal of Fatigue, 59 (IF-1.730). pp. 14-22.

Roy, P K and Ray, Ashok K and Parida, N (2014) Creep Life Prediction of 1.25Cr-0.5Mo, 2.25Cr - 1Mo and 9Cr-1Mo Steels by accelerated creep rupture tests - A comparative study. [Presentation Slide] (Unpublished)

Roy, Rajat K (2014) Recrystallization Behavior of Commercial Purity Aluminium Alloys. In: Light Metals Alloys Applications. InTech Europe Janeza Trdine 9 51000 Rijeka, Croatia, Croatia.

Roy, Rajat K and Das, Swapan K and Panda, A K and Mitra, Amitava (2014) Analysis of Superheater Boiler Tubes Failed through Non-linear Heating. Procedia Engineering, 86 (NIF-0.629). pp. 926-932.

Roy, Rajat K and Das, Swapan K and Srivastava, Abhinav and Panda, A K and Mitra, A (2014) Damage evaluation of fossil fuelled power plant boiler tubes through magnetic Barkhausen technique. Engineering Failure Analysis, 44 (IF-1.130). pp. 195-201.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2014) The joining behavior of structural steel assemblies of SS321 and 9Cr-1Mo by Cu based rapidly solidified filler alloy. Conference proceeding of ICONS 2014 . (Submitted)

Roy, Subrata and Mandal, S K and Das, Avimanyu (2014) Segregation and Process Features in a Teeter Bed Separator as Revealed by High-Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review, 35(1) (IF-0.690). pp. 15-22.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2014) Structure and indentation behavior of nanocomposite Ti–B–N films. Thin Solid Films, 564 (IF-1.867). pp. 160-169.

S

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Library Users of Selective Metallurgical Institutions in Jharkhand. DESIDOC Journal of Library & Information Technology, 34(1) (IF-0.645). pp. 3-10.

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Scientists and Engineers: A Case Study of Government, Public and Private Sector RDLICs Relating to Metallurgy & Materials Science. SRELS Journal of Information Management, 51(1) . pp. 39-50.

Sambamurthy, E and Dutta, Siuli and Panda, A K and Mitra, A and Roy, Rajat K (2014) Evaluation of post-weld heat treatment behavior in modified 9Cre1Mo steel weldment by magnetic Barkhausen emission. International Journal of Pressure Vessels and Piping, 123-124 (IF-1.078). pp. 86-91.

Sarkar, B and Dalal, Biswajit and Ashok, V D and Chakrabarti, Kaushik and Mitra, A and De, S K (2014) Magnetic properties of mixed spinel BaTiO3-NiFe2O4 composites. Journal of Applied Physics, 115(12) (IF- 2.185).

Seth, Prem Prakash (2014) Study of Bake-hardening behaviour of ultra-low carbon BH 220 steel at different strain rates. Masters thesis, National Institute of Technology, Rourkela.

Shah, Minal and Roy, S and Sahu, Rina (2014) Production of perfect sinter-Need for blast furnaces. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 223-229.

Shakhtshneider, T P and Myz, S A and Nizovskii, A L and Kalinkin, A V and Boldyrev, V V and Alex, T C and Kumar, Rakesh (2014) Effect of the Selected Inorganic Carriers on the Properties of Mechanocomposites with Drugs. Doklady Chemistry, 456(2) (IF-0.351). pp. 98-102.

Sharma, S and Azad, S C and Khan, Md Soaib and Ranjan, R and Behera, Banarji and Choudhura, R N P (2014) Effect of Gd3+-substitution on structural and electrical properties of lead zirconate titanate (PZT; Zr/ Ti = 55/45) ceramics. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 137-142.

Shi, D and Sun, L L and Mi, G J and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2014) Controlling ferrofluid permeability across the blood-brain barrier model. Nanotechnology, 25(7) (IF-3.672).

Singh, Ashutosh Pratap (2014) Optimization of Strength of Micro-alloy Vanadium Steel by Fixing The Nitrogen Content& Varying The Vanadium Content. Masters thesis, CSIR-NML .

Singh, C B and Gupta, R N and Vaish, A K and Singh, S D and Goswami, N G (2014) Ancient iron making from lean grade ores in India - An introspection. Journal of Metallurgy and Materials Science , 56(2) (NON-SCI). pp. 93-105.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Singh, Rajesh Kumar (2014) Corrosion protection of mild steel by organic inhibitors. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 187-193.

Singh, Rajesh Kumar (2014) Corrosion protection of stainless steel in 15% H SO 2 4. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 239-244.

Singh, Ranjeet K and Dey, Shobhana and Mohanta, M K and Das, Avimanyu (2014) Enhancing the Utilization Potential of a Low Grade Chromite Ore through Extensive Physical Separation. Separation Science and Technology, 49(12) (IF-1.200). pp. 1937-1945.

Singh, Satnam and Roy, R K and Mahato, B and Ghosh, M and Mitra, A and Panda , A K (2014) Effect of Al incorporation for Co on the gamma-beta phase boundary of rapidly solidified CoNiAl ferromagnetic shape memory alloys. Journal of Magnetism and Magnetic Materials, 368 (IF-2.002). pp. 379-383.

Singhbabu, Y N and Kumari, Priya and Parida, Sunena and Sahu, Ranjan K (2014) Conversion of pyrazoline to pyrazole in hydrazine treated N-substituted reduced graphene oxide films obtained by ion bombardment and their electrical properties. Carbon, 74 (IF-6.160). pp. 32-43.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Development of Geopolymer Concrete from Fly Ash and Bottom Ash Mixture. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 143-148.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Reduction of pollution by using Fly ash, bottom ash and granulated blast furnace slag in geopolymer building materials. Scholars Journal of Engineering and Technology (SJET), 1(3) . pp. 177-182.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D (2014) Solvent extraction and separation of zinc and iron from spent pickle liquor. Hydrometallurgy, 147–148 (IF-2.224). pp. 103-111.

Sinha, N and Singh, R (2014) Beneficiation and purification of a low grade and finely disseminated graphite ore. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 15-22.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Soupramanien, C and Swaminathan, J (2014) Failure analysis of refractory anchors of powder boiler. Procedia Engineering, 86 (NIF-0.629). pp. 919-925.

Srivastava, Nidhi and Dhal, B and Abhilash, and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828 . pp. 81-91.

Srivastava, Rajiv Ranjan and Kim, Min-seuk and Lee, Jae-chun and Jha, Manis K and Kim, Byung-Su (2014) Resource recycling of superalloys and hydrometallurgical challenges. Journal of Material Science, 49(14) (IF-2.599). pp. 4671-4686.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2014) Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8) (IF-0.505). pp. 744-757.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Swaminathan, J and Das, C R and Baral, Jayashree and Phaniraj, C and Ghosh, R N and Albert, S K and Bhaduri, A K (2014) Creep strength behavior of boron added P91 steel and its weld in the temperature range of 600–650 degree C. In: Energy Materials Conference proceedings 2014, November 4-6, 2014, Xi'an Shaanxi Provice, China.

V

Vasumathi, N and Vijaya Kumar, T V and Nayak, B and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2014) Beneficiation of low grade graphite ore of eastern India by two-stage grinding and flotation. Journal of Mining and Metallurgy Section A Mining, 50 A (1) . pp. 9-17.

Vidyadhar, A (2014) Recovery of metal values from pre-concentration of coarser size fraction of printed circuit boards by froth flotation. In: TMS 2014, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2014) Adsorption Mechanism of Mixed Cationic/Anionic Collectors in Quartz-Hematite Flotation System. Mineral Processing and Extractive Metallurgy Review: An International Journal, 35(2) (IF-0.690). pp. 117-125.

Vijaya Kumar, T V and Gopalakrishna, S J (2014) Optimization of flotation process for reduction of alumina and silica from screw classifier overflow of an iron ore washing plant. International Journal of Engineering Research, 3/1 (IF-0.421). pp. 1-5.

This list was generated on Thu Mar 28 11:44:10 2024 IST.