Items where Year is 2014

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 200.

UNSPECIFIED (2014) Extractive separation of La and Nd using ionic liquid as extractant. In: Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D, (eds.) 18th International Conference on Non-ferrous Minerals & Metals-2014. Corporate Monitor, Nagpur, India, Tech-19/1-Tech-19/6.

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash, and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.069). pp. 559-566.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Ahmad, Khalil and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 23-27.

Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Zaid, Rajeh and Singh, J K and Singh, D D N (2014) Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions. Corrosion, 70(1) (IF-2.908). pp. 74-86.

Alex, T C (2014) An insight into the changes in the thermal analysis curves of boehmite with mechanical activation. Journal of Thermal Analysis and Calorimetry, 117 (IF-2.206). pp. 163-171.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 1. Planetary milling. Powder Technology, 264 (IF-2.269). pp. 105-113.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 2. Attrition milling. Powder Technology, 264 (IF-2.269). pp. 229-235.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Towards ambient pressure leaching of boehmite through mechanical activation. Hydrometallurgy, 144 (IF-2.224). pp. 99-106.

Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Al-Zaid, Rajeh and Singh, D D N (2014) Effect of Simulated Concrete Pore Solution Chemistry, Chloride Ions, and Temperature on Passive Layer Formed on Steel Reinforcement. ACI Materials Journal, 111/4 (IF-1.123). pp. 411-421.

Ali, F and Scudino, S and Anwar, M S and Shahid, R N and Srivastava, V C and Uhlenwinkel, V and Stoica, M and Vaughan, G and Eckert, J (2014) Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. Journal of Alloys and Compounds, 607 (IF-2.407). pp. 274-279.

Ali, Tayyab and Venkataraman, A (2014) Synthesis and characterization of polyaniline coated functionalized g-Fe O nanoparticles. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 35-39.

Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .

Balusamy, T and Venkateswarlu, M and Murthy, K S N and Vijayanand, S and Sankara Narayanan, T S N (2014) Effect of Surface Mechanical Attrition Treatment (SMAT) on the Surface and Electrochemical Characteristics of Pb-Sn Alloy. International Journal of Electrochemical Science, 9(1) (IF-1.956). pp. 96-108.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Barman, H and Hamada, A S and Sahu, T and Mahato, B and Talonen, J and Shee, S K and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2014) A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel. Metallurgical and Materials Transaction A, 45A(4) (IF-1.730). pp. 1937-1952.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Basavaraja, C and Kumar, K B Satish and Vishnuvardhan, T K (2014) Hony comb patterns and DC conductivity of cellulose multiwalled carbon nanotube composite films. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 209-215.

Bhagat, R P and Nayak, B and Bhattacharyya, K K and Goswami, M C (2014) Mineralogy of iron ore pellet and its correlation with crushing strength. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 117-123.

Bhaskar Raju, G and Parthiban, V and Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2014) Separation of sillimanite from beach sands contaminated with shell. International Journal of Scientific Engineering and Technology, 3(4) (IF-1.852). pp. 320-325.

Bhattacharya, S and Dhar, S and Das, S K and Ganguly, Ranjan and Webster, T J and Nayar, S (2014) Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity. International Journal of Nanomedicine, 9 (IF-4.195). pp. 1287-1298.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

Chakrabarti, Kaushik and Sarkar, B and Ashok, V D and Das, K and Chaudhuri, S S and Mitra, A and De, S K (2014) Exchange bias effect in BiFeO3-NiO nanocomposite. Journal of Applied Physics, 115(1) (IF-2.185). 013906.

Chakraborty, J (2014) Diffraction stress analysis of fiber textured Ti thin films undergoing hcp - fcc phase transformation. International Confrence on Residual Stresses 9 (ICRS 9), 768-769 . pp. 257-263.

Chakraborty, J and Maiti, Tias and Ghosh, M and Das, Goutam and Chandra, Sanjay (2014) Cementite dissolution in cold drawn pearlitic steel wires: role of dislocations. International Confrence on Residual Stresses 9 (ICRS9), 768-769 . pp. 304-312.

Chakravarty, S and Mohanty, Ashok and Ghosh, B and Tarafder, Mita and Aggarwal, S G and Gupta, P K and Prabhat, K (2014) Proficiency Testing in Chemical Analysis of Iron Ore: Comparison of Statistical Methods for Outlier Rejection. Mapan-Journal of Metrology Society of India, 29(2) (IF-0.477). pp. 87-95.

Chatterjee, Partho Pratim (2014) Embryonic improvements of solar photovoltaics. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 67-72.

Chennakesavulu, K and Sreedevi, P and Raviatul Basaria, M and Ramanjaneya Reddy, G and Bhaskar Raju, G and Prabhakar, S and Sasipraba, T (2014) Thermal decomposition mechanism of p-tert-butyl-calix[n]arenes. Thermochimica Acta (2014) , 575 (IF-2.105). pp. 55-63.

Cherian, Antony (2014) A non-invasive technique for compositional analysis of coal. Masters thesis, NIT Trichy.

Cherian, Antony (2014) A Non-Invasive Technique for Compositional Analysis of Coal. Masters thesis, NIT Trichy.

Choi, Seo-Young and Nguyen, Viet Tu and Lee, Jae-chun and Kang, Ho and Pandey, B D (2014) Liquid–liquid extraction of Cd(II) from pure and Ni/Cd acidic chloride media using Cyanex 921: A selective treatment of hazardous leachate of spent Ni–Cd batteries. Journal of Hazardous Materials, 278 (IF-4.331). pp. 258-266.

Choubey, Pankaj K and Jha, Manis K and Gupta, Divika and Jeong, Jinki and Lee, Jae-chun (2014) Recovery of rare metal indium (In) from discarded LCD monitors. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Choudhary, B N and Roy, B N and Vaish, A K and Singh, S D (2014) Smelting of sponge iron fines for the production of steel grade iron. Journal of Metallurgy and Materials Science, 15(2) (NON-SCI). pp. 107-116.

Chowdhury, A and Bijalwan, P K and Sahu, Ranjan K (2014) Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films. Applied Surface Science, 289 (IF-2.538). pp. 430-436.

Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur).

Das, Arpan (2014) Magnetic properties of cyclically deformed austenite. Journal of Magnetism and Magnetic Materials, 361 (IF-2.002). pp. 232-242.

Das, Arpan (2014) Slip System Activity During Cyclic Plasticity. Metallurgical and Materials Transactions A, 45 A (7) (IF-1.730). pp. 2927-2930.

Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009.

Das, Arpan and Roy, Nilima and Ray, Ashok K (2014) Stress induced creep cavity. Materials Science and Engineering A, 598 (IF-2.409). pp. 28-33.

Das, C R and Albert, S K and Laha, K and Swaminathan, J and Ravi, S and Bhaduri, A K and Murty, B S and Mayer, P (2014) Influence of Coincidence Site Lattice Boundary on Creep Resistance of P91 Steel Weldments. Procedia Engineering, 86 (NIF-0.629). pp. 80-87.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Das, T K and Mandal, S K and Panda, A K and Bhattacharya, S and Banerji, Pallab and Mitra, A (2014) Giant Magnetoimpedance (GMI) Effect and Field Sensitivity of Ferrofluid Coated Co66Fe2Si13B15Cr4 Soft Magnetic Amorphous Microwire. Physics Procedia, 54 (NIF-0.629). pp. 16-22.

Das, T K and Mitra, A and Mandal, S K and Roy, Rajat K and Banerji, Pallab and Panda, A K (2014) Parametric controls on giant magnetoimpedance (GMI) behaviour of CoFeSiBCr amorphous wires for prospective sensor applications. Sensors and Actuators A-Physical , 220 (IF-1.841). pp. 382-387.

Das, T K and Mitra, A and Roy, Rajat K and Panda, A K and Mandal, S K (2014) Development of GMI Based Sensing Device for Identification of Magnetic Phases in Steel. In: All India Seminar on Instrumentation and Process Control, April 24 - 25, 2014, Jamshedpur.

Das, T K and Panda, A K and Mitra, A and Banerji, Pallab and Mandal, S K (2014) Rapidly solidified CoFeSiBCr amorphous wire : From manipulation to giant magnetoimpedance sensor applications. 195 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 195-202.

Das, T K and Panda, A K and Mitra, A and Roy, Rajat K and Mandal, S K (2014) Giant Magnetoimpedance Sensor for Structural Integrity Assessment of Engineering Components. In: National Seminar and Exhibition on Non-Destructive Evaluation, NDE 2014, December 3 - 5, 2014, Pune.

Datta, A K (2014) Low cycle fatigue life prediction of thin stiffened plates under repetitive stresses. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

Datta, A K (2014) Responses of stiffened plates with varying depth of stiffeners under uniform lateral loads. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

De, J and Bhattacharjee, S and Dhar, S and Acharyya, S K and Gupta, S K and Tarafder, S (2014) Finite Element Simulation of Multi-Axial Low Cycle Fatigue of Material SA333. Procedia Engineering, 86 (NIF-0.629). pp. 158-165.

De, Subhabrata and Bhattacharya, J (2014) Dependence of bioremediation performance of acid mine drainage on substrate characteristics. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 203-207.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Development of novel Al-alloy (Al-5Mg)/10Wt.%TiB 2 metal matrix composites by in-situ reaction synthesis. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 179-186.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Wear behavior of Al-Alloy (Al-5Mg) in-situ reinforced TiB particulate. 217 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 217-222.

Dey, Shobhana and Mohanta, M K and Goswami, M C and Pani, Santosh (2014) Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making. Journal of Minerals and Materials Characterization and Engineering, 2 . pp. 513-521.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar (2014) Study of interactions of frother blends and its effect on coal flotation. Powder Technology, 260 (IF-2.269). pp. 78-83.

Dhal, B and Abhilash, and Pandey, B D (2014) Microbial sorption studies for removal of trivalent chromium from model tanning bath. Advanced Materials Research, 828 . pp. 33-44.

Director, NML (2014) Annual Report 2013-2014. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2014) Director's Desk - 65th RC Meeting of CSIR-NML (English Version). CSIR-NML, Jamshedpur.

Divya, M and Das, C R and Albert, S K and Goyal, Sunil and Ganesh, P and Kaul, R and Swaminathan, J and Murty, B S and Kukreja, L M and Bhaduri, A K (2014) Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613 (IF-2.409). pp. 148-158.

Dutta, Samik and Barat, K and Das, Arpan and Das, Swapan K and Shukla, A K and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47 (IF-1.526). pp. 130-144.

Esfahani, Hamid Reza and Mirsalehi, Seyyed Ehsan (2014) Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 231-238.

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Ghosh, Arpita and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Ghosh, Ishita and Das, Suchandan K and Chakraborty, N (2014) An artificial neural network model to characterize porosity defects during solidification of A356 aluminum alloy. Neural Computing and Applications, 25 (IF-1.763). pp. 653-662.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863.

Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201.

Goswami, B and Raj, A and Srivastava, S C and Ray, Ashok K (2014) Vanadium in industrial traditions and innovations. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 149-161.

Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206.

Guguloth, K and Swaminathan, J and Ghosh, R N (2014) Creep life predicition of P91 Steel from stress relaxation tests. In: ECCC Creep & Fracture 2014, May 5-7, 2014, Rome, Italy.

Guha, Avijit and Nayar, S (2014) Low-Temperature Biomimetic Synthesis of beta-Tricalcium Phosphate by Altering pH. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 44(6) (IF-0.518). pp. 789-792.

Hung Ha, Vinh and Lee, Jae-chun and Huyunh, Trung Hai and Jeong, Jinki and Pandey, B D (2014) Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone. Hydrometallurgy, 149 (IF-2.224). pp. 118-126.

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2014) Time-dependent variation of the electrochemical impedance for thermo-mechanically treated versus plain low alloy steel rebars in contact with simulated concrete pore solution. Construction and Building Materials, 73 (IF-2.265). pp. 283-288.

Jha, Animesh and Srikanth, S (2014) Measurement of non-isothermal oxygen potentials in a Cu–Fe–Ca–S–O liquid during reduction of chalcopyrite in lime and carbon mixtures. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123(1) (IF-0.690). pp. 21-28.

Jha, Manis K and Gupta, Divika and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2014) Solvent extraction of copper, zinc, cadmium and nickel from sulfate solution in mixer settler unit (MSU). Separation and Purification Technology, 122 (IF-3.065). pp. 119-127.

Jha, Manis K and Gupta, Divika and Lee, Jae-Chun and Kumar, Vinay and Jeong, Jinki (2014) Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142 (IF-2.224). pp. 60-69.

0140NF2013 (2014) A process for the recovery of rare earth metals yttrium, lanthanum, terbium & europium from scrap fluorescence tube. .

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Joseph, Kitheri and Kutty, K V Govindan and Goswami, M C and Rao, P R Vasudeva (2014) Viscosity and crystallization mechanism of cesium loaded iron phosphate glasses. Thermochimica Acta, 587 (IF-2.105). pp. 42-47.

Kalinkin, A M and Kumar, S and Gurevich , B I and Kalinkina, E V and Tyukavkina, V V (2014) Synthesis of geopolymer materials based on slags of nonferrous metallurgy with the use of mechanoactivation. Glass Physics and Chemistry, 40(1) (IF-0.532). pp. 26-30.

Kalpana, Y and Roy, S and Alka, (2014) Evaluation of plant extracts as corrosion inhibitors for Cu-alloys in river water. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 59-66.

Kar, Sujoy and Suman, Swati and Sivaprasad, S and Chaudhuri, Atanu and Bhattacharjee, A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy,Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A, 610 (IF-2.409). pp. 171-180.

Karmakar, A and Sivaprasad, S and Kundu, S and Chakrabarti, D (2014) Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Metallurgical and Materials Transactions A, 45A(4) (IF-1.730). pp. 1659-1664.

Karmakar, A and Sivaprasad, S and Nath, S K and Misra, R D K and Chakrabarti, D (2014) Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel. Metallurgical and Materials Transactions A, 45A(5) (IF-1.730). pp. 2466-2479.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) An overview on different processes for recovery of valuable metals from tungsten carbide scrap. In: International Conference on Nonferrous Minerals and Metals (ICNFMM), July 2014, Nagpur.

Kavitha, C and Ravichandran, K and Sankara Narayanan, T S N (2014) Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel. Transactions of the Institute of Metal Finishing, 92(3) (IF-0.747). pp. 161-168.

Kavitha, C and Sankara Narayanan, T S N and Ravichandran, K and Park, I S and Lee, Min Ho (2014) Deposition of zinc-zinc phosphate composite coatings on steel by cathodic electrochemical treatment. Journal of Coatings Technology and Research, 11(3) (IF- 1.280). pp. 431-442.

Khalilahmada, and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 173-177.

Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101.

Kumar, A and Chacko, Z E and Malathi, M and Godiwalla, K M and Ajmani, S K and Ranganathan, S (2014) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85(5) (IF-1.023). pp. 927-934.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Kumar, Sanjay and Kumar, Rakesh (2014) Geopolymer : Cement for low carbon economy. The Indian Concrete Journal, 88(7) . pp. 29-37.

Kumar, Vinay and Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Lee, J Y (2014) Recovery of rare earth metals (REMs) from primary and secondary resources: a review. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumar, Vinod and Kumari , Anjan and Jha, Manis K and Vidyadhar, A and Soni, B K (2014) Recycling of valuable metals from poly cracker ash of printed circuit boards (PCBS) by physical beneficiation and hydrometallurgical treatment. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2014) Extractive separation of La and Nd using Ionic Liquid as extractant. In: 18th International Conference on Non-ferrous Minerals & Metals -2014, 11-12 July, 2014, Nagpur.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2014) A neural network model for quantitative prediction of oxide scale in water walls of an operating Indian coal fired boiler. Research and Review in Electrochemistry, 5(6) . pp. 155-168.

Kumari, Anjan and Kumari, Archana and Jha, Manis K and Kumar, Vinod and Singh, R P and Yoo, Kyoungkeun (2014) Copper recovery from small devices populated on waste printed circuit boards. Journal of Metallurgy and Materials Science,, 56(1) (NON-SCI). pp. 41-51.

Kurniawan, M and Roy, Rajat K and Panda, A K and Greve, D W and Ohodnicki, P R and McHenry, Michael E (2014) Interplay of stress, temperature, and giant magnetoimpedance in amorphous soft magnets. Applied Physics Letters, 105 (22) (IF-3515). p. 222407.

Madge, S V and Caron, A and Gralla, R and Wilde, G and Mishra, Suman K (2014) Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47 (IF-1.696). pp. 6-10.

Maheswari, N and Ghosh Chowdhury, S and Kumar, K C Hari and Sankaran, S (2014) Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels. Materials Science and Engineering A, 600 (IF- 2.409). pp. 12-20.

Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2) . pp. 101-108.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2 . pp. 227-235.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Mazinan , Vahid and Nosrati , Hassan (2014) Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol gel process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 29-34.

Mazinani, Vahid (2014) Effect of pH on SiC nanopowder synthesized by sol-gel method. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 143-147.

Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.

Meshram, Pratima and Kumari, Jyotsna and Abhilash, and Pandey, B D (2014) Extraction of V2O5 from Bayer’s Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Metya, Avijit Kr and Palit Sagar, S and Ghosh Chowdhury, S (2014) Evaluation of Crystallographic Texture in SS316L Steel by Ultrasonic Signal Analysis. In: National Conference on Nondestructive Evaluation (NDE-2014), 04-06 Dec 2014, Pune.

Mishra, Aadarsh (2014) The films of tin sulphide for use in thin film solar cell devices. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 73-76.

Mishra, Suman K and Bhople, A and Paswan, S (2014) Microstructure, hardness, toughness and oxidation resistance of Al2O3-ZrB2 composite with different Ti percentages prepared by in-situ SHS dynamic compaction. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 7-12.

Mishra, Suman K and Gokuul, V and Paswan, S (2014) Alumina-titanium diboride in situ composite by self-propagating high-temperature synthesis (SHS) dynamic compaction: Effect of compaction pressure during synthesis. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 19-24.

Mishra, Suman K and Shravan Kumar, K and Bysakh, S and Sreemany, M and Pathak, L C (2014) Investigation of interface, microstructure, and mechanical properties of layered thermal barrier coatings of lanthanum zirconate and YSZ deposited by EB-PVD process. Surface and Interface Analysis, 46(7) (IF-1.393). pp. 449-456.

Mishra, Swati and Nayar, S (2014) Protein-polymer Matrix Mediated Synthesis of Silver Nanoparticles. Nanobiomedicine, 1(3) . pp. 1-5.

Mishra, T and Wang, Lei and Hahn, Robert and Schmuki, Patrik (2014) In-situ Cr doped anodized TiO2 nanotubes with increased photocurrent response. Electrochimica Acta, 132 (IF-4.086). pp. 410-415.

Mucsi, G and Molnar, Zoltan and Kumar, Sanjay (2014) Geopolymerisation of Mechanically Activated Lignite and Brown Coal Fly Ash. Acta Physica Polonica A, 126 (IF-0.604). pp. 994-998.

Mucsi, G and Molnar, Zoltan and Racz, Adam and Faitli, Jozsef and Gombkoto, Imre and Raczkevi, Balazs and Kumar, Sanjay (2014) High energy density milling as a tool for improving the properties of fly ash based geopolymer. In: XXVI International Mineral Processing Congress (IMPC) 2014 Proceedings, October 20-24, 2014, Santiago, Chile.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Murthy, G V S and Das, Swapan K and Ravi Kumar, B (2014) Comprehensive Microstructural Characterization of γ′ in a Nimonic Alloy Using Ultrasonic Velocity Measurements. Metallography, Microstructure, and Analysis, 3(4) . pp. 328-335.

Nath, S K and Kumar, Sanjay and Kumar, Rakesh (2014) Effect of mechanical activation on cordierite synthesis through solid-state sintering method. Bulletin of Material Science, 37(6) (IF-0.870). pp. 1221-1226.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Nayak, B and Halbach, P and Pracejus, B and Münch, U (2014) Massive sulfides of Mount Jourdanne along the super-slow spreading Southwest Indian Ridge and their genesis. Ore Geology Reviews, 63 (IF-3.383). pp. 115-128.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2014) Selective recovery of cobalt, nickel and lithium from sulfate leachate of cathode scrap of Li-ion batteries using liquid-liquid extraction. Metals and Materials International, 20(2) (IF-1.223). pp. 357-365.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2014) Neuro-optimal control of an unmanned helicopter. Journal of Defence Modelling and Simulation, 11(1) (IF-). pp. 5-18.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Palit Sagar, S (2014) Non-linear ultrasonic for structural damage assessment: Approach at CSIR-National Metallurgical Laboratory. In: Workshop on current and future trends of Non-linear ultrasonic technique for NDE, 21-24 Oct, 2014, Seoul, Korea.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2014) Leaching of rare earth metals (REMs) from Korean monazite concentrate. Journal of Industrial and Engineering Chemistry, 20(4) (IF-2.063). pp. 2035-2042.

Panindre, Anup M and Ranjan, Nitish and Sahu, Rina (2014) Reclaiming iron from solid wastes via Romelt process. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 163-172.

Parmar, Kavita and Bhattacharjee, S (2014) Studies on Pb(II) and Cd(II) adsorption by Fe(II) and Fe(III) silicate precipitation tubes in aqueous medium. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 125-135.

Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.

Paswan, Dayanand and Vaish, A K and Singh, S D and Ghorai, S and Malathi, M and Prasad, S and Minj, R K (2014) Production of Alloy Cast Iron from Multi–Metallic Magnetite Ore of Nagaland. Steel World 2013, 19/11 . pp. 36-38.

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Pathak, Arvind and Kumar, Sanjay and Jha, Vinay Kumar (2014) Development of Building Material from Geopolymerization of Construction and Demolition Waste (CDW). Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 133-137.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished)

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2014) Chemical beneficiation of Hingula coal. Journal of Metallurgy and Materials Science, 56(3) . pp. 173-177.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Damage Analysis of Service Exposed Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 201-216.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Performance and Life Assessment of Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 217-230.

Raj, A and Goswami, B and Ray, Ashok K (2014) Creep and Fatigue Behavior in Micro-alloyed Steels - A Review. High Temperature Materials and Processes, 33(1) (IF-0.356). pp. 1-12.

Raji, K (2014) Influence of density on Al-Cu composition during compaction process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 53-57.

Randhawa, N S and Dwivedi, A D and Prajapati, S and Jana, R K (2014) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. In: National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problem and Solutions (LGO-2013), 22-23 January, 2013, CSIR-NML, Jamshedpur.

Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.

Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.

Randhawa, N S and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM), 12-15 November 2014, College of Engineering, Pune (COEP).

Randhawa, N S and Yelne, Payal M and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2014) Recovery of metals from spent nickel-cadmium (Ni-Cd) battery by leaching-electrowining process. In: 18th Int. Conf. on non-ferrous Met. 2014, 11-12 July 2014, Nagpur (India).

0094NF2014 (2014) An improved process for the pyrolysis of depopulated printed circuit boards (PCBs) of e-waste. 0094NF2014.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising - 3. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 77-91.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising-2. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 1-14.

Ray, Ashok K and Roy, Nilima and Matwa, M and Davuluri, A and Kumari, A and Kumar, P and Mundhada, D and Kaushal, V and Roy, B N (2014) Uncertainty in Damage Assessment and Remaining Life Prediction of Engineering Materials Used In Petrochemical Industry. Petroleum & Environmental Biotechnology, 5(4) . pp. 1-16.

Roy, A and Manna, I and Chattoraj, I (2014) Anomalies in hydrogen enhanced fatigue of a high strength steel. International Journal of Fatigue, 59 (IF-1.730). pp. 14-22.

Roy, P K and Ray, Ashok K and Parida, N (2014) Creep Life Prediction of 1.25Cr-0.5Mo, 2.25Cr - 1Mo and 9Cr-1Mo Steels by accelerated creep rupture tests - A comparative study. [Presentation Slide] (Unpublished)

Roy, Rajat K (2014) Recrystallization Behavior of Commercial Purity Aluminium Alloys. In: Light Metals Alloys Applications. InTech Europe Janeza Trdine 9 51000 Rijeka, Croatia, Croatia.

Roy, Rajat K and Das, Swapan K and Panda, A K and Mitra, Amitava (2014) Analysis of Superheater Boiler Tubes Failed through Non-linear Heating. Procedia Engineering, 86 (NIF-0.629). pp. 926-932.

Roy, Rajat K and Das, Swapan K and Srivastava, Abhinav and Panda, A K and Mitra, A (2014) Damage evaluation of fossil fuelled power plant boiler tubes through magnetic Barkhausen technique. Engineering Failure Analysis, 44 (IF-1.130). pp. 195-201.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2014) The joining behavior of structural steel assemblies of SS321 and 9Cr-1Mo by Cu based rapidly solidified filler alloy. Conference proceeding of ICONS 2014 . (Submitted)

Roy, Subrata and Mandal, S K and Das, Avimanyu (2014) Segregation and Process Features in a Teeter Bed Separator as Revealed by High-Speed Videography and Image Processing. Mineral Processing and Extractive Metallurgy Review, 35(1) (IF-0.690). pp. 15-22.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2014) Structure and indentation behavior of nanocomposite Ti–B–N films. Thin Solid Films, 564 (IF-1.867). pp. 160-169.

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Library Users of Selective Metallurgical Institutions in Jharkhand. DESIDOC Journal of Library & Information Technology, 34(1) (IF-0.645). pp. 3-10.

Sahu, A K and Goswami, N G and Choudhury, B K (2014) Information Needs of Scientists and Engineers: A Case Study of Government, Public and Private Sector RDLICs Relating to Metallurgy & Materials Science. SRELS Journal of Information Management, 51(1) . pp. 39-50.

Sambamurthy, E and Dutta, Siuli and Panda, A K and Mitra, A and Roy, Rajat K (2014) Evaluation of post-weld heat treatment behavior in modified 9Cre1Mo steel weldment by magnetic Barkhausen emission. International Journal of Pressure Vessels and Piping, 123-124 (IF-1.078). pp. 86-91.

Sarkar, B and Dalal, Biswajit and Ashok, V D and Chakrabarti, Kaushik and Mitra, A and De, S K (2014) Magnetic properties of mixed spinel BaTiO3-NiFe2O4 composites. Journal of Applied Physics, 115(12) (IF- 2.185).

Seth, Prem Prakash (2014) Study of Bake-hardening behaviour of ultra-low carbon BH 220 steel at different strain rates. Masters thesis, National Institute of Technology, Rourkela.

Shah, Minal and Roy, S and Sahu, Rina (2014) Production of perfect sinter-Need for blast furnaces. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 223-229.

Shakhtshneider, T P and Myz, S A and Nizovskii, A L and Kalinkin, A V and Boldyrev, V V and Alex, T C and Kumar, Rakesh (2014) Effect of the Selected Inorganic Carriers on the Properties of Mechanocomposites with Drugs. Doklady Chemistry, 456(2) (IF-0.351). pp. 98-102.

Sharma, S and Azad, S C and Khan, Md Soaib and Ranjan, R and Behera, Banarji and Choudhura, R N P (2014) Effect of Gd3+-substitution on structural and electrical properties of lead zirconate titanate (PZT; Zr/ Ti = 55/45) ceramics. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 137-142.

Shi, D and Sun, L L and Mi, G J and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2014) Controlling ferrofluid permeability across the blood-brain barrier model. Nanotechnology, 25(7) (IF-3.672).

Singh, Ashutosh Pratap (2014) Optimization of Strength of Micro-alloy Vanadium Steel by Fixing The Nitrogen Content& Varying The Vanadium Content. Masters thesis, CSIR-NML .

Singh, C B and Gupta, R N and Vaish, A K and Singh, S D and Goswami, N G (2014) Ancient iron making from lean grade ores in India - An introspection. Journal of Metallurgy and Materials Science , 56(2) (NON-SCI). pp. 93-105.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Singh, Rajesh Kumar (2014) Corrosion protection of mild steel by organic inhibitors. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 187-193.

Singh, Rajesh Kumar (2014) Corrosion protection of stainless steel in 15% H SO 2 4. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 239-244.

Singh, Ranjeet K and Dey, Shobhana and Mohanta, M K and Das, Avimanyu (2014) Enhancing the Utilization Potential of a Low Grade Chromite Ore through Extensive Physical Separation. Separation Science and Technology, 49(12) (IF-1.200). pp. 1937-1945.

Singh, Satnam and Roy, R K and Mahato, B and Ghosh, M and Mitra, A and Panda , A K (2014) Effect of Al incorporation for Co on the gamma-beta phase boundary of rapidly solidified CoNiAl ferromagnetic shape memory alloys. Journal of Magnetism and Magnetic Materials, 368 (IF-2.002). pp. 379-383.

Singhbabu, Y N and Kumari, Priya and Parida, Sunena and Sahu, Ranjan K (2014) Conversion of pyrazoline to pyrazole in hydrazine treated N-substituted reduced graphene oxide films obtained by ion bombardment and their electrical properties. Carbon, 74 (IF-6.160). pp. 32-43.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Development of Geopolymer Concrete from Fly Ash and Bottom Ash Mixture. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 143-148.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Reduction of pollution by using Fly ash, bottom ash and granulated blast furnace slag in geopolymer building materials. Scholars Journal of Engineering and Technology (SJET), 1(3) . pp. 177-182.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D (2014) Solvent extraction and separation of zinc and iron from spent pickle liquor. Hydrometallurgy, 147–148 (IF-2.224). pp. 103-111.

Sinha, N and Singh, R (2014) Beneficiation and purification of a low grade and finely disseminated graphite ore. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 15-22.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Soupramanien, C and Swaminathan, J (2014) Failure analysis of refractory anchors of powder boiler. Procedia Engineering, 86 (NIF-0.629). pp. 919-925.

Srivastava, Nidhi and Dhal, B and Abhilash, and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828 . pp. 81-91.

Srivastava, Rajiv Ranjan and Kim, Min-seuk and Lee, Jae-chun and Jha, Manis K and Kim, Byung-Su (2014) Resource recycling of superalloys and hydrometallurgical challenges. Journal of Material Science, 49(14) (IF-2.599). pp. 4671-4686.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2014) Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8) (IF-0.505). pp. 744-757.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Swaminathan, J and Das, C R and Baral, Jayashree and Phaniraj, C and Ghosh, R N and Albert, S K and Bhaduri, A K (2014) Creep strength behavior of boron added P91 steel and its weld in the temperature range of 600–650 degree C. In: Energy Materials Conference proceedings 2014, November 4-6, 2014, Xi'an Shaanxi Provice, China.

Vasumathi, N and Vijaya Kumar, T V and Nayak, B and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2014) Beneficiation of low grade graphite ore of eastern India by two-stage grinding and flotation. Journal of Mining and Metallurgy Section A Mining, 50 A (1) . pp. 9-17.

Vidyadhar, A (2014) Recovery of metal values from pre-concentration of coarser size fraction of printed circuit boards by froth flotation. In: TMS 2014, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA.

Vidyadhar, A and Kumari, Neha and Bhagat, R P (2014) Adsorption Mechanism of Mixed Cationic/Anionic Collectors in Quartz-Hematite Flotation System. Mineral Processing and Extractive Metallurgy Review: An International Journal, 35(2) (IF-0.690). pp. 117-125.

Vijaya Kumar, T V and Gopalakrishna, S J (2014) Optimization of flotation process for reduction of alumina and silica from screw classifier overflow of an iron ore washing plant. International Journal of Engineering Research, 3/1 (IF-0.421). pp. 1-5.

This list was generated on Thu Mar 28 11:44:17 2024 IST.