Items where Year is 2004
Jump to: Annual Reports | Article | Book or NML Publication | Conference or Workshop Item | Patent | Thesis Number of items: 164.
Annual ReportsDirector, NML (2004) Annual Report 2003-2004. NML, Jamshedpur. ISBN 0972-4273 ArticleAgrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118. Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438. Agrawal, A and Sahu, K K and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources. Waste Management & Research, 22 (4). pp. 240-247. Agrawal, A and Sahu, K K and Pandey, B D (2004) Removal of zinc from aqueous solutions using sea nodule residue. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 237 (1-3). pp. 133-140. Agrawal, A and Sahu, K K and Pandey, B D (2004) Separation and removal of cobalt and zinc from chloride solution by Indion BSR - A chelating resin. Separation Science and Technology, 39 (10). pp. 2373-2388. Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120. Babu, M Nani and Sahu, K K and Pandey, B D and Mankhand, T R (2004) Kinetics of leaching of zinc from sphalerite concentrate with sodium persulphate. Canadian Metallurgical Quarterly , 43 (3). pp. 321-328. Bahadur, Aruna and Ravi Kumar, B and Kumar, A Seshu and Sarkar, G G and Rao, J S (2004) Development and comparison of residual stress measurement on welds by various methods. Materials Science and Technology, 20 (2). pp. 261-269. Baldevraj, and Mudali, U Kamachi and Jayakumar, T (2004) R&D Challenges in the Technology of Fast Breeder Reactors for Energy Security in the Country. The excerpts of the lecture delivered by Dr. Baldev Raj . pp. 105-146. Banerjee, K and Roy, Nilima and Ghosh, R N and Chatterjee, U S (2004) Strain rate dependence of plastic flow behaviour of HSLA-100 steel in seawater during cathodic charging of hydrogen. Transactions of the Indian Institute of Metals, 57 (6). pp. 611-616. Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Aging behaviour in copper bearing high strength low alloy steels. ISIJ International, 44 (1). pp. 115-122. Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2004) Development of indigenous column flotation technology at NML for the beneficiation of low-grade ores. Metals Materials and Processes, 16 (2-3). pp. 143-156. Bhattacharjee, S and Kar, S and Chakravarty, S (2004) Mineral compositions of Datura: A traditional tropical medicinal plant. Communications in Soil Science and Plant Analysis, 35 (7-8). pp. 937-946. Bhattamishra, A K and Basu, D K and De, P K and Narang, S K (2004) Corrosion behaviour of carbon steels and aluminium alloys in different media - A comparative study. Journal of Metallurgy and materials Science, 46 (1). pp. 51-59. Biswas, P K and Godiwalla, K M and Dev, S C (2004) Physical modelling of particle distribution for stir cast metal matrix composite using sand-water and sand - aqueous CaCl2 slurry system. Journal of Metallurgy and materials Science, 46 (2). pp. 67-93. Bose, S C and Singh, K and Swaminathan, J and Sarma, D S (2004) Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology. Materials Science and Technology, 20 (10). pp. 1290-1296. Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2004) The Kinetics of Reduction of Iron in Indian Chromite Ores by Carbon. Metals Materials and Processes, 16 (2-3). pp. 199-208. Chakraborty, Jui and Nayar, S and Singh, T B and Bhattacharyya, D and Sinha, Arvind (2004) Templated growth of mesoporous aluminum phosphate tubules using protein molecules of tobacco. Journal of Materials Science, 39 (1). pp. 285-288. Chandrasekaran, V and Kannan, K and Natesan, M (2004) Corrosion behaviour of mild steel in phosphoric acid medium with benzotriazole. Journal of Metallurgy and Materials Science, 46 (4). pp. 253-262. Chattaraj, Mousumi and Sinha, N K (2004) Isolation and characterization of chemical constituent from the leaves of Cestrum nocturnum. Journal of Metallurgy and materials Science., 46 (4). pp. 243-245. Chaudhary, P N and Minj, R K and Krishna, Ram and Goel, R P (2004) Selective removal of phosphorus from high carbon ferromanganese - an improved process. Metals Materials and Processes, 16 (2-3). pp. 217-226. Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5. Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Preparation and thermomechanical properties of stir cast Al-2Mg-11TiO2 (rutile). Bulletin of Materials Science, 27 (6). pp. 517-521. Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Tensile and fracture behavior of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 374 (1-2). pp. 184-190. Chaudhury, S K and Sivaramakrishnan, C S and Panigrahi, S C (2004) A new spray forming technique for the preparation of aluminium rutile (TiO2) ex situ particle composite. Journal of Materials Processing Technology, 145 (3). pp. 385-390. Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2004) Influence of pre-straining on mechanical properties of HSLA steel by using ball indentation technique. Zeitschrift Fur Metallkunde, 95 (12). pp. 1120-1127. Das, N N and Konar, J and Mohanta, M K and Srivastava, V C (2004) Adsorption of Cr(VI) and Se(IV) from their aqueous solutions onto Zr4+-substituted ZnAl/MgAl-layered double hydroxides: effect of Zr4+ substitution in the layer. Journal of Colloid and Interface Science, 270 (1). pp. 1-8. Das, N N and Samal, Amrendra (2004) Synthesis, characterisation and rehydration behaviour of titanium(IV) containing hydrotalcite like compounds. Microporous and Mesoporous Materials, 72 (1-3). pp. 219-225. Das, Samar and Ghosh, Arindam and Kundu, Sukumar and Chatterjee, S (2004) A study on structure and properties of a hot forged HSLA-80 steel. Transactions of the Indian Institute of Metals, 57 (1). pp. 25-33. Das, Suchandan K and Godiwalla, K M (2004) Mathematical modelling of carbonisation in Metallurgical coke making process. Metals Materials And Processes, 16 (2-3). pp. 327-338. Das, Swapan K and Joarder, A and Mitra, A (2004) Magnetic Barkhausen emissions and microstructural degradation study in 1.25 Cr–0.50 Mo steel during high temperature exposure. NDT & E International, 37 (3). pp. 243-248. Duy, P To and Lee, Z H (2004) Incluence of rare earth metals on non-metallic inclusion in 25Cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and materials Science., 46 (3). pp. 135-146. Duy, P To and Lee, Z H (2004) Modifying inclusion types and shapes by rare earth metals addition to low carbon steel. Journal of Metallurgy and materials Science., 46 (3). pp. 147-155. Elango, A (2004) Corrosion behaviour of diffusion coatings deposited by slurry chromising, electro plating and aluminium spraying onto mild steel panel. Journal of Metallurgy and materials Science., 46 (2). pp. 123-133. Elango, A and Periasamy, V M and Paramasiv, M (2004) Polarization of 57S aluminium used as galvanic anode in 2M NaOH. Journal of Metallurgy and materials Science., 46 (4). pp. 247-252. Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55. Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Ball indentation technique - An important and useful method for studying the flow properties of materials. Transactions Of The Indian Institute Of Metals, 57 (1). pp. 51-60. Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Effectiveness of ball indentation technique for evaluating mechanical properties of micro alloyed steel. Journal of Metallurgy and materials Science, 46 (2). pp. 95-105. Goswami, B and Ray, Ashok K and Sahay, S K (2004) Thermal barrier coating system for gas turbine application - A review. High Temperature Materials And Processes, 23 (2). pp. 73-92. Goswami, B and Sahay, S K and Ray, Ajoy K (2004) Application of thermal barrier coatings on combustion chamber liners - A review. High Temperature Materials And Processes , 23 (3). pp. 211-236. Hait, Jhumki and Jana, R K and Sanyal, S K (2004) Mineralogical characteristics of copper electrorefining anode slime and its leached residues. Industrial & Engineering Chemistry Research, 43 (9). pp. 2079-2087. Haldar, A and Huang, X and Leffers, T and Hansen, N and Ray, R K (2004) Grain orientation dependence of microstructures in a warm rolled IF steel. Acta Materialia, 52 (18). pp. 5405-5418. Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2004) Studies on leaching and recycling of Zinc from rayon waste sludge. Industrial & Engineering Chemistry Research, 43 (3). pp. 1284-1295. Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2004) Thermal decomposition of zinc carbonate hydroxide. Thermochimica Acta, 410 (1-2). pp. 93-100. Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2004) Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique. Materials Letters, 58 (5). pp. 733-738. Konar, J and Gupta, K K and Chandra, N and Amritphale, S S (2004) Effect of p-nitrophenol on corrosion behaviour of white Cast iron and aluminium added white Cast iron. Journal of Metallurgy and materials Science, 46 (3). pp. 191-196. Kulkarni, A D and Deepa, V and Saha, Malini and Srinivasan, K (2004) Impact toughness of copper, zinc, tin, a-brass and phosphor bronze at different temperatures. Journal of Metallurgy and materials Science., 46 (3). pp. 175-182. Kumar, Anil (2004) Hot-dip zinc coatings - A comparative study: Part II. Journal of Metallurgy and materials Science, 46 (2). pp. 115-121. Kumar, Anil and Ravi Kumar, B and Chattoraj, I and Mukherjee, S and Basumallick, A (2004) Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen. Metallurgical and Materials Transactions B, 35 (6). pp. 1123-1128. Kumar, Manoj and Pal, J and Ghosh, S (2004) Performance of sponge iron charging in electric arc furnace. Journal of Metallurgy and materials Science, 46 (3). pp. 197-204. Kumar, S and Das, S K and Daspoddar, P K (2004) Synthesis of mullite aggregates from fly ash: effect on thermomechanical behaviour of low cement castables. British Ceramic Transactions, 103 (4). pp. 176-180. Kumar, Sanjay and Bandopadhyay, A and Rajnikanth, V and Alex, T C and Kumar , Rakesh (2004) Improved processing of blended slag cement through mechanical activation. Journal of Materials Science, 39 (10). pp. 3449-3452. Kumar, Sushil and Prasad, Sanjay and Udayabhanu, G (2004) Studies on some aspects of extraction of nickel from laterite ore. Journal of Metallurgy and materials Science, 46 (1). pp. 39-49. Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383 . pp. 1-6. Mahato, D K and Chaudhary, R K and Bhattamishra, A K and Srivastava, S C (2004) Synthesis and characterization of some PLNZT ceramics. Journal Of Materials Science-Materials In Electronics, 15 (9). pp. 575-578. Maity, S and Chakravarty, S and Thakur, P and Gupta, K K and Bhattacharjee, S and Roy, B C (2004) Evaluation and standardisation of a simple HG-AAS method for rapid speciation of As(III) and As(V) in some contaminated groundwater samples of West Bengal, India. Chemosphere - Global Change Science, 54 (8). pp. 1199-1206. Majumdar, J Dutta and Nath, A K and Ravi Kumar, B and Manna, I (2004) Studies on residual stress developed in laser surface irradiated 0.6% carbon steel. Optics and Lasers in Engineering, 14 (3-4). pp. 133-151. Mandal, R K and Pramanick, A K and Sastry, G V S and Lele, S (2004) Unique Indexing Scheme of Decagonal Phases based on a six Dimensional Model. Materials Resources Society Symposium Proceedings, 805 . LL1.6.1-LL1.6.10. Mandal, Sudipta and Rao, Venkatesh and Ray, Ajoy K (2004) Characterization of the brazed joint interface between Al2O3 and (Ag-Cu-Ti). Journal of Materials Science, 39 (16-17). pp. 5587-5590. Mandal, Sudipta and Ray, Ashok K and Ray, Ajoy K (2004) Correlation between the mechanical properties and the microstructural behaviour of Al2O3–(Ag–Cu–Ti) brazed joints. Materials Science and Engineering A, 383 (2). pp. 235-244. Manivel, P and Venkatachari, G (2004) The influence of H+ and Cl- ions on the effect of corrosion inhibition of iron by p-substituted anilines. Journal of Metallurgy and materials Science., 46 (3). pp. 165-173. Manivel, P and Venkatachari, G (2004) Investigation on the inhibitive effect of poly (p-aminophenol) on corrosion of iron in 1M HCL solutions. Journal of Metallurgy and Materials Science, 46 (4). pp. 263-270. Mishra, D and Anand, S and Panda, R K and Das, R P (2004) Studies on characterization, microstructures and magnetic properties of nano-size barium hexa-ferrite prepared through a hydrothermalprecipitation–calcination route. Materials Chemistry and Physics, 86 . pp. 132-136. Mishra, D and Anand, S and Panda, R K and Das, R P (2004) X-ray diffraction studies on aluminum-substituted barium hexaferrite. Materials Letters, 58 . pp. 1147-1153. Mishra, Suman K and Das, S and Pathak, L C (2004) Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis. Materials Science and Engineering A, 364 (1-2). pp. 249-255. Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Blov, D Y (2004) Self-propagating high-temperature synthesis of a zirconium diboride-alumina composite: a dynamic X-ray diffraction study. Philosophical Magazine Letters Online ISSN 1362-3036, 84 (1). pp. 41-46. Mitra, A and De, P K and Bhattacharya, D K and Srivastava, P K and Jiles, D C (2004) Ferromagnetic properties of deformation-induced martensite transformation in AISI 304 stainless steel. Metallurgical and Materials Transactions A, 35 (2). pp. 599-605. Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2004) Structure and magnetic properties of amorphous and nanocrystalline Fe40Co40Cu0.5Zr9Al2Si4B4.5 alloys. Journal of Magnetism and Magnetic Materials, 278 (3). pp. 299-305. Mukherjee, Surojit and Raole, P M and Kumar, A and Chattoraj, I and Rao, K R M and Manna, I (2004) Studies on low-energy nitrogen plasma immersion ion implantation on austenitic stainless steel and Cu-strengthened HSLA-100 steel. Surface and Coatings Technology, 186 (1-2). pp. 282-286. Mukhopadhyay, N K and Bhatt, Jatin and Pramanick, A K and Murty, B S and Paufler, P (2004) Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling. Journal of Materials Science, 39 (16-17). pp. 5155-5159. Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335 . pp. 52-56. Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2004) Removal of sulfide, sulfate and sulfite ions by electro coagulation. Journal of Hazardous Materials, 109 (1-3). pp. 37-44. Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2004) Separation of pollutants from tannery effluents by electro flotation. Separation and Purification Technology, 40 (1). pp. 69-75. Murugananthan, M and Prabhakar, S and Bhaskar Raju, G (2004) Urban wastewater treatment by electroflotation. Fresenius Environmental Bulletin, 13 (6). pp. 519-523. Nayar, S and Brahma, Amrita and Barat, Bhaswati and Bhattacharyya, D (2004) UDP-Galactose 4-Epimerase from Kluyveromyces fragilis: analysis of its hysteretic behavior during catalysis. Biochemistry, 43 (31). pp. 10212-10223. Nayar, S and Sinha, Arvind (2004) Systematic evolution of a porous hydroxyapatite–poly(vinylalcohol)–gelatin composite. Colloids and Surfaces B: Biointerfaces, 35 (1). pp. 29-32. Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38. Panda, A K and Manimaran, A and Mitra, A and Basu, S (2004) AFM surface morphology and magnetic properties of nanocrystalline Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 ribbons. Applied Surface Science, 235 (4). pp. 475-486. Pathak, L C (2004) Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes. Ceramics International, 30 (3). pp. 417-427. Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (2004) Synthesis and sintering characteristics of Y–Ba–Cu-oxide superconductors. Materials Science and Engineering B, 110 (2). pp. 119-131. Pathak, L C and Singh, T B and Das, Swapan K (2004) Role of templating agents on the growth morphology of AIPO4. Journal of Materials Science, 39 (12). pp. 4069-4071. Perumal, K E (2004) Metallurgical Variables Leading to Corrosion/ Cracking of Chemical Process Equipments. National Seminar on Corrosion Failures & Mitigation . Phuong, To Duy (2004) A Study on the precipitations of rare earth metals inclusion phase in Fe-Cr-Ni-RE System. Journal of Metallurgy and materials Science., 46 (4). pp. 233-242. Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2004) Flotation and cyanidation of a semi refractory gold ore. European Journal of Mineral Processing & Environmental Protection, 4 (1). pp. 36-42. Pradhan, A M (2004) Role of Dream in Kui-Culture. Orissa Review, Nov . pp. 29-30. Pramanick , A K and Mandal, R K and Sastry, G V S (2004) Structural stability of Al-Co-Cu-Ni decagonal phase. Journal of Non-Crystalline Solids, 334-335 . pp. 234-237. Prasad, Sanjay (2004) Reduction studies on polymetallic sea nodules. Journal of Metallurgy and materials Science, 46 (3). pp. 157-164. Ranganath, V R and Das, Goutam and Tarafder, S and Das, Swapan K (2004) Failure of a swing pinion shaft of a dragline. Engineering Failure Analysis, 11 (1). pp. 599-604. Ranganathan, S (2004) Control of charge distribution to optimise metal quality in the production of ferro alloys. Journal of Metallurgy and materials Science, 46 (1). pp. 61-65. Rao, Addanki S and Gupta, K K and Sircar, J K and Srivastava, S C (2004) A rapid flame atomic absorption spectroscopic procedure for determination of lead in aluminium base alloys. Indian Journal Of Chemical Technology , 11 (4). pp. 475-478. Rao, D S and Srikanth, S (2004) Failure of an idle air control valve in a gasoline-fuelled automobile. Engineering Failure Analysis, 11 (3). 313-322 . Rao, V V (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25 % Mn alloy. Indian Journal Of Engineering And Materials Sciences , 11 (3). pp. 224-226. Rao, V Venkateswara (2004) An electrolytic method for studying the microstructure and grain size of Al-1.25% Mn alloy. Indian Journal of Engineering and Materials Sciences, 11 (3). pp. 224-226. Rao , D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2004) Heavy mineral distribution in the beach sands of North coastal Andhra Pradesh and South coastal Tamilnadu. SGAT Bulletin, 5 (2). pp. 1-9. Ravi Kumar, B and Singh, A K and Das, Samar and Bhattacharya, D K (2004) Cold rolling texture in AISI 304 stainless steel. Materials Science and Engineering A, 364 (1-2). pp. 132-139. Ravichandran, K and Sankara Narayanan, T S N (2004) Corrosion of brass in cooling water systems - Role of Mannich base derivatives. Corrosion Reviews , 22 (1). pp. 71-84. Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212. Ray, Ashok K and Das, Goutam and Ranganath, V R and Goswami, B and Ghosh, R N (2004) Failure of connecting pins of a compressor disc in an aero engine. Engineering Failure Analysis, 11 (4). pp. 613-617. Ray, Ashok K and Das, Swapan K and Mondal, S and Ramachandrarao, P (2004) Microstructural characterization of bamboo. Journal of Materials Science, 39 (3). pp. 1055-1060. Ray, Ashok K and Goswami, B (2004) Applications of thermal barrier coating system in gas turbines - A review. Journal of Metallurgy and materials Science, 46 (1). pp. 1-22. Ray, Ashok K and Tiwari, Y N and Khan, A J and Roy, P K and Das, Goutam and Singh, Raghubir (2004) Health assessment of radiant heater tube. High Temperature Materials and Processes , 24 (1). pp. 35-45. Roy, Nilima and Godiwalla, K M and Dwarakadasa, E S and Ray, Ashok K (2004) Elasto-plastic deformation in thermal barrier coated superalloys. Scripta Materialia, 51 (7). pp. 739-743. Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383 . pp. 30-38. Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2004) Creep behaviour in Ti-based alloys. High Temperature Materials and Processes, 24 (5). pp. 323-336. Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32. Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320. Sahu, K K and Agrawal, A and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part II: zinc recovery from secondary sources. Waste Management & Research, 22 (4). pp. 248-254. Sahu, S K and Agrawal, A and Pandey, B D and Kumar, Vinay (2004) Recovery of copper, nickel and cobalt from the leach liquor of a sulphide concentrate by solvent extraction. Minerals Engineering, 17 (7-8). pp. 949-951. Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205. Sankara Narayanan, T S N and Stephen, A and Guruskanthan, S (2004) Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 179 (1). pp. 56-62. Sasikumar, C and Rao, D S and Srikanth, S and Ravi Kumar, B and Mukhopadhyay, N K and Mehrotra, S P (2004) Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India. Hydrometallurgy, 75 (1-4). pp. 189-204. Schulz, A and Srivastava, V C and Uhlenwinkel, V and Bauckhage, K (2004) Spray forming of 2014-Al alloy based composites with injection of SiC particulates. Zeitschrift Fur Metallkunde , 95 (9). pp. 763-768. Sekhar, K C and Gupta, K K and Bhattacharjee, S and Chakravarty, S (2004) The determination of gold in ore samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Spectrochimica Acta Part B Atomic Spectroscopy, 25 (4). pp. 165-169. Singh, M K and Banerjee, M K and Narang, S K (2004) A study on eco-friendly chromate-free passivation of galvanised steels. Journal of Metallurgy and materials Science, 46 (3). pp. 183-189. Singh, Ratnakar and Bhattacharya, P and Bhattacharyya, K K and Maulik, S C (2004) Reduction of Alumina in Indian Iron Ores. Metals Materials and Processes, 16 (2-3). pp. 1-14. Sinha, Arvind and Chakraborty, J and Joy, P A and Ramachandrarao, P (2004) Magnetic field-induced biomimetic synthesis of superparamagnetic poly (vinyl alcohol)-maghemite composite. Journal of Materials Research, 19 (6). pp. 1676-1681. Sinha, D and Sahoo, K L and Sinha, U B and Swu, T and Chemseddine, A and Fink, D (2004) Gamma-induced modifications of polycarbonate polymer. Radiation Effects and Defects in Solids, 159 (10). pp. 587-595. Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2004) Modelling ductile fracture behaviour from deformation parameters in HSLA steels. Fatigue & Fracture of Engineering Materials & Structures, 27 (10). pp. 897-909. Srikanth, S and Das, Swapan K and Ravi Kumar, B and Rao, D S and Nandakumar, K and Vijayan, P (2004) Nature of fireside deposits in a bagasse and groundnut shell fired 20 MW thermal boiler. Biomass and Bioenergy, 27 (4). pp. 375-384. Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20. Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638. Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147 . pp. 174-180. Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites. Journal of Materials Science, 39 (22). pp. 6821-6825. Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20 . pp. 839-848. Tarafder, Mita and Dey, Swati and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2004) Initiation fracture toughness of HSLA steel through automatic measurement of stretch zone. Materials Science and Technology, 20 (12). pp. 1531-1537. Thakur, P and Chakravarty, S and Maity, S and Bhattacharjee, S and Gupta, K K (2004) A Study on the Adsorption of Cr(VI) on a Synthetically Prepared Zn-Al-Cl Layered Double Hydroxide(LDH). Metals Materials and Processes, 16 (2-3). pp. 339-350. Thakur, U P (2004) Recent Developments in Corrosion Mitigation. National Seminar on Corrosion Failures & Mitigation . To Duy, P and Lee, Z H (2004) Influence of rare earth metals on non-metallic inclusion in 25cr-7Ni-3Mo-0.25N duplex stainless steel. Journal of Metallurgy and Materials Science, 46 (3). pp. 135-146. Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162. Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231. Venkateswarlu, K and Chakraborty, M and Murty, B S (2004) Influence of thermo-mechanical processing of Al-5Ti-1B master alloy on its grain refining efficiency. Materials Science and Engineering A, 364 (1-2). pp. 75-83. Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113. Venkateswarlu, K and Pathak, L C and Ray, Ajoy K and Das, Goutam and Verma, P K and Kumar, M and Ghosh, R N (2004) Microstructure, tensile strength and wear behaviour of Al–Sc alloy. Materials Science and Engineering A, 383 (2). pp. 374-380. Book or NML PublicationDirector, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265 Director, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265 Director, NML (2004) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265 Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahaptra, S P and Mishra, C R (2004) Mechanochemistry and the Bayer process of alumina production. In: LIGHT METALS 2004. TMS (The Minerals, Metals and Materials Society), pp. 31-34. ISBN 978-0-470-95294-8 Conference or Workshop ItemBanerjee, S K (2004) Order and Disorder in Alloys. In: The excerpt of the lecture delivered by D.S. Banerjee, 01/05/2003, Jamshedpur. Bhagat , A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China. Bhaskar Raju, G and Prabhakar, S and Rao, S Subba (2004) Studies on the Beneficiation of Barite. In: International Seminar on Mineral Processing Technology (MPT - 2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Bhattacharryya, K K and Sil, S K and Chattoraj, U S and Maulik, S C (2004) An Approach to Beneficiation of Apatite Ore of Purulia. In: International Seminar on Mineral Processing Technology (MPT -2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Bhattacharya, S and Dey, Shobhana and Ahmad, Zahid (2004) Frother Dependency in Coal Flotation. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Chopra, K L (2004) Nano-Materials and Nano-Technology. In: The excerpts of the lecture delivered by Prof. K. L. Chopra, 24/01/2003, Jamshedpur. Das, Chitrangada and Singh, N K and Mehta, K D and Pandey, B D (2004) Potential Application of a Heterotrophic Microorganism for Bioleaching of Metals from Indian Ocean Nodules. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Gupta, Santosh K and Bhat, Shrikant A (2004) Genetic Algorithm and Multi-objective Function Optimization with the Jumping Gene(Transposon) Adaptation-A Primer. In: The excerpts of the lecture clelivered by Prof, Santosli K. Gupta, 14/07/2003, Jamshedpur. Havelia, Sarthak and Malathi, M and Deo, Brahma (2004) Heat Transfer Analysis of Lance Skulling in Top Blown Oxygen Steelmaking converters. In: International Symposium of Research Students on Material Science and Engineering, December 20-22, 2004, Chennai, India. Jacob, K T (2004) Fuel Cell : Efficient Power Sources of 21st Century. In: The excerpt of the lecture delivered by Prof. K. T Jacob, 28/05/2003, Jamshedpur. Kumari, Sarita and Sahu, S K and Sharma, Vikram and Agrawal, A and Bagchi, D and Pandey, B D and Kumar, Vinay (2004) Synthesis of electrolytic copper and nickel powders from the copper bleed electrolyte of a copper smelter. In: Non Ferrous Meet - 2004, 2004. Maulik, S C and Bhattacharyya, K K (2004) A Beneficiation Scheme for Reduction of Alumina in Iron Ores from Barsua. In: International Seminar on Mineral Processing Technology (MPT-2004) , February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Mehrotra, S P (2004) Mathematical modelling: A wonderful tool if Judiciously used. In: UNSPECIFIED. Mishra, Sanak (2004) Some thoughts on Leadership and Knowledge. In: The excerpt of the lecture delivered by Dr. Sanak Mishra, 23/09/2003, Jamshedpur. Mohan, B M and Ghosh, Arpita (2004) A Simplest Fuzzy PID Controller: Analytical Structure and Stability Analysis. In: IEEE INDIA ANNUAL CONFERENCE 2004, 20-22 December, 2004, Kharagpur. Muthuraman, B (2004) Development in Steel Research. In: The excerpts of the Lecture delivered by Shri B. Muthuraman, 26/09/2002, Jamshedpur. Narang, S K (2004) NML's Contributions in Corrosion, Failures & Mitigation. In: National Seminar on Corrosion Failures & Mitigation, 2004, NML Jamshedpur. Ranganathan, S (2004) Pre-Reduction of Chromite Ores. In: Proceeding of International Seminar on 1st Ferro Alloys India, 8-10 Feb 2004, Hyderabad, India. Rodriguez, Placid (2004) Non-Destructive Evaluation: Science and Technology. In: The excerpts of the lecture delivered by Dr. Placid Rodriguez, 26/11/2002, Jamshedpur. Singh, R and Banerjee, B and Srivastava, J P (2004) Effects of Process Parameters on Selective Flotation of Lead-Zinc Ore. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa. Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Development of 2014-Al Alloy Based SiCp Particulate Reinforced Composites by Spray Co-deposition Process. In: International Conference on Powder Metallurgy-2004, October 17-19, 2004, Vienna, Austria. Tarafder, S and Gupta, K K (2004) Estimation of Uncertainty in Mechanical Testing. In: Refresher Course on ISO/IEC 17025 Standards, 27-28 Aug 2004, Kolkata. PatentNML (2004) A process for the extraction of zinc from zinc waste effluent. 1869DEL2004. US2002000095526 (2004) Process for recovery of nickel from spent catalyst. US6733564. US2002000112044 (2004) Process for the preparation of nanosized iron oxide by biomimetic route. US6800271. ThesisNarasaiah, N (2004) Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels. PhD thesis, IIT Kharagpur. |