Items where Year is 2001
Number of items: 139.
Annual ReportsDirector, NML (2001) Annual Report 2000-2001. NML, Jamshedpur. ISBN 0972-4273 ArticleBaskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338. Bhagat, R P (2001) Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide. Colloid and Polymer Science, 279 (1). pp. 33-38. Bhagat, R P and Banerjee, B and Kunwar, R K (2001) Beneficiation tests on an Indian bauxite incorporating magnetic separation. Transactions of the Institution of Mining And Metallurgy Section C-Mineral Processing And Extractive Metallurgy, 110 . C165-C168. Bhattamishra, A K and Basu, D K (2001) A comparative study on the performance of inhibitors for protection of recirculating cooling water system. Journal of Metallurgy and materials Science, 43 (2). pp. 141-145. Biswas, D K and Asthana, S R and Rau, V G (2001) Pollution management with techno-economic evaluation for coke based and cokeless cupolas. Applied Thermal Engineering, 21 (3). pp. 359-379. Bodas, M G and Mathur, S B (2001) Treatment of vanadium pentoxide plant effluent by ion exchange process. Transactions of the Indian Institute of Metals, 54 (3). pp. 131-136. Chakraborty, M and Paramguru, R K and Jena, A K (2001) Electrochemical dissolution of nichrome in sulphuric acid. Hydrometallurgy, 59 (1). pp. 45-54. Chaudhary, P N and Goel, R P (2001) Dephosphorisation of high carbon ferromanganese using BaCO3 based fluxes. Ironmaking & Steelmaking, 28 (5). pp. 396-403. Chaudhary, S K (2001) Corrosion of Rails: Causes and its prevention. Journal of Metallurgy and materials Science, 43 (4). pp. 265-271. Chowdhury, Susmita and Banerjee, M K and Singh, M N and Basu, D K (2001) Electrochemical studies on painted mild steel based on organic coatings in different media-paper-I. Journal of Metallurgy and materials Science, 43 (4). pp. 253-263. Das, Suchandan K (2001) Evaluation of solid-liquid interface profile during continuous casting by a spline based formalism. Bulletin of Materials Science, 24 (4). pp. 373-378. Das, Suchandan K (2001) Mathematical modelling of flow field in a continuous slab caster tundish including near wall turbulence effects. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 21-26. Das, Suchandan K (2001) Tracking of solidification profile during continuous casting by a spline based collocation algorithm. Transactions of the Indian Institute of Metals, 54 (1-2). pp. 69-73. Datta, A K (2001) Evaluation of RCC bridge and present practices of bridge management system. Journal of Metallurgy and materials Science, 43 (4). pp. 273-280. Deb, P and Ghosh, S and Basumallick, A (2001) Preparation of nano-sized CoFe2O4 particles from a non-aqueous precursor. Journal of Metallurgy and materials Science, 43 (2). pp. 113-117. Dey, Shobhana and Bhagat, R P and Kunwar, R K and Rao, D S and Banerje, B and Maulik, S C (2001) Comparative Studies on Beneficiation of Bauxite Samples for Application in Refractory Industry. Metals Materials and Processes, 13(1) . pp. 1-8. Dogan , Ali and Aslantas, M and Havvatoglu, Y (2001) Investigation of magnetostriction strain for martensitic phase transformation FCC to FCT. Journal of Metallurgy and materials Science, 43 (1). pp. 1-7. Ghatak, S K (2001) High temperature superconducting materials. Journal of Metallurgy and materials Science, 43 (2). pp. 67-75. Ghosh, M and Dutta, B K and Basumallick, A and Ghosh, S (2001) Preparation of copper-tin compacts by warm compaction route. Journal of Metallurgy and materials Science, 43 (2). pp. 119-125. Ghosh Chowdhury, S and Kumar, Pravesh and Das, Swapan K and Bhattacharya, D K and Parida, N (2001) Failure analysis of high temperature studs. Engineering Failure Analysis, 8 (6). pp. 521-528. Godiwalla, K M and Roy, Nilima and Chaudhuri, S and Ray, Ashok K (2001) Investigation and modeling of mechanical properties for thermal barrier coatings under bending. International Journal of Turbo & Jet-Engines, 18 (2). pp. 77-103. Goswami, M C and Biswas, P K and Vaish, A K (2001) Kinetics of reduction of low grade iron ore by charcoal. Journal of Metallurgy and materials Science, 43 (3). pp. 181-188. Govind, and Nair, K S and Mittal, M C and Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (2001) Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy. Materials Science and Engineering A, 304-306 . pp. 520-523. Gutpa, K K and Bhattacharjee, S and Sekhar, K C (2001) Determination of Gold by Inductively Coupled Plasma Optical Emission Spectrometry. Geological Survey of India, 58 (Suppl). pp. 487-492. Jha, Manis K and Kumar, Vinay and Singh, R J (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resources, Conservation and Recycling, 33 (1). pp. 1-22. Kumar, Anil and Jha, G (2001) Hot-dip zinc coatings - A comparative study. Journal of Metallurgy and materials Science, 43 (1). pp. 9-16. Kumar, Anil and Khanna, A S and Banerjee, M K (2001) Epoxy coatings for rebar - A study. Journal of Metallurgy and materials Science, 43 (3). pp. 189-195. Kumar, Sanjay and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922. Mahato, D K and Chaudhary, R K and Mohanta, M K and Srivastava, S C (2001) Phase characterisation of PZT type ceramics prepared by spray drying technique. Journal of Metallurgy and Materials Science, 43 (3). pp. 197-202. Mahato, R Raman and Bhattamishra, A K and Singh, R and Jayakrishnan, P (2001) Corrosion behaviour of painted HSLA panels in chloride environment – a comparative study of different paints. Anti-Corrosion Methods and Materials, 48 (3). pp. 188-194. Mahato, R Raman and Jayakrishnan, P and Bhattamishra, A K and Singh, Ratnakar (2001) Corrosion behaviour of painted HSLA panels in chloride environment a comparative study of different paints. Anti-Corrosion Methods and Materials , 48 (3). pp. 188-193. Maji, Bikas Chand and Ray, R K and Madangopal, Krishan (2001) Evolution of texture and microstructure during deformation and annealing of Fe3AI based alloy. Journal of Metallurgy and materials Science, 43 (2). pp. 103-111. Majumdar, Shrabani and Mohanty, O N (2001) Non-oriented electrical steel: An overview. Journal of Metallurgy and materials Science, 43 (2). pp. 43-56. Mishra, Purusottam Narayana and Kak, S K and Srivastava, S C (2001) An expert system for LD steel making. IETE Journal if Research, 47 (1-2). pp. 85-89. Mitra, A and Panda, A K and Rao, Venkatesh (2001) Gaint magneto-impedance behaviour in amorphous and nanocrystalline soft magnetic materials. Journal of Metallurgy and materials Science, 43 (2). pp. 127-133. Mitra, A and Panda, A K and Singh, S R and Ramachandrarao, P (2001) Preparation and characterization of Fe–Nb–Cu–Si–B-based nanocrystalline soft magnetic materials. Applied Surface Science, 182 (3-4). pp. 321-325. Mondal, Sudipta and Saha, M B and Ray, Ajoy K (2001) Processing and characterisation of Ag-Cu- Ti brazing alloys. Journal of Metallurgy and materials Science, 43 (1). pp. 17-23. Murty, B S and Maiti, R and Chakraborty, M (2001) Development of in-situ AI-TiB2 metal matrix composites. Journal of Metallurgy and materials Science, 43 (2). pp. 93-101. Nayar, S and Sinha, Arvind and Das, Samar and Ramachandrarao, P (2001) In situ synthesis of nanosized cadmium sulfide using bovine serum albumin. Journal of Materials Science Letters, 20 (23). pp. 2099-2100. Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211. Panda, A K and Chattoraj, I and Mitra, A (2001) Crystallization and magnetic properties of rapidly solidified Fe-Nb-M-Si-B (M=Cu, Mn, Pt). Materials Science and Engineering A, 304-306 . pp. 950-953. Panda, A K and Roy, S and Singh, S R and Rao, Venkatesh and Pramanik, S and Chattoraj, I and Mitra, A and Ramachandrarao, P (2001) Effect of quenching rate on the properties of melt-spun FeNbCuSIB ribbons. Materials Science and Engineering A, 304-306 . pp. 457-461. Pandey, B D and Kumar, Vinay and Bagchi, D and Jana, R K and Premchand, (2001) Processing of Tungsten Preconcentrate from Low Grade Ore to Recover Metallic Values. Mineral Processing and Extractive Metallurgy Review: An International Journal, 22 (1). pp. 101-120. Parashar, S K S and Basu, D K and Banerjee, M K (2001) Failure analysis of alkyd coating and its model. Journal of Metallurgy and materials Science, 43 (1). pp. 33-41. Parashar, S K S and Basu, D K and Banerjee, M K (2001) Measurement of diffusion layer of temporary surface coatings. Journal of Metallurgy and materials Science, 43 (4). pp. 247-252. Parida, N and Tarafder, S (2001) Failure analysis of turbo-generator of a 10 MW captive power plant. Engineering Failure Analysis, 8 (3). pp. 303-309. Pathak, L C and Bandyopadhyay, D and Srikanth, S and Das, Swapan K (2001) Effect of heating rates on the synthesis of Al2O3–SiC composites by the self-propagating high-temperature synthesis (SHS) technique. Journal of the American Ceramic Society, 84 (5). pp. 915-920. Pathak, L C and Mishra, Suman K and Das, Swapan K and Bhattacharya, D (2001) Effect of sintering atmosphere on the weak-link behaviour of YBCO superconductors. Physica C: Superconductivity, 351 (3). pp. 295-300. Prakash Narayan, S (2001) Effect of hot workability parameters on the magnetic properties of nano-crystalline Nd-Fe-B magnets. Journal of Metallurgy and materials Science, 43 (2). pp. 135-140. Pramanick, A K (2001) Nature of streaking and ordering in rapidly solidified Al–Co–Cu–Ni system. Materials Science and Engineering, 304-306 . pp. 818-821. Pramanick, A K (2001) Special Diffraction Effects in Al7o_xCo15Cux+yNi15_y Decagonal Alloys. Ferroelectrics, 250 . pp. 273-279. Prodhan, A and Sivaramakrishnan, C S and Chakrabarti, A K (2001) Solidification of aluminum in electric field. Metallurgical and Materials Transactions B, 32 (2). pp. 372-378. Ramachandrarao, P (2001) Iron & Steel heritage of India: Contributions from the National Metallurgical Laboratory. Metallurgy in India: A Retrospective . pp. 182-193. Ramachandrarao, P (2001) National Metallurgical Laboratory: Fifty Golden Years. Metallurgy in India: A Retrospective, NML Golden Jubilee Commemorative Volume ( ). pp. 526-535. Ranganathan, S and Godiwalla, K M (2001) Effect of preheat, bed porosity, and charge control on thermal response of submerged arc furnace producing ferrochromium. Ironmaking & Steelmaking, 28 (3). pp. 273-278. Rao, V V (2001) Preparation and properties of Al2O3/Al in-situ composites by reactive melt penetration. Indian Journal of Engineering and Materials Sciences, 8 (3). pp. 161-164. Raposo, V and Mitra, A and Li, YF and Vazquez, M (2001) Spontaneous mechanical rotation of as-cast and annealed FeSiBNbCu wires under high-frequency axial ac field. Journal of Physics D-Applied Physics, 34 (9). pp. 1346-1351. Ravichandran, K and Kumar, N M and Subash, K and Sankara Narayanan, T S N (2001) Mannich base derivatives - A novel class of corrosion inhibitors for cooling water systems. Corrosion Reviews, 19 (1). pp. 29-42. Ravichandran, K and Sankara Narayanan, T S N (2001) Studies on acceleration of the low temperature zinc phosphating processes. Transactions of the Institute of Metal Finishing, 79 (4). pp. 143-145. Ray, Ashok K and Roy, Nilima and Godiwalla, K M (2001) Crack propagation studies and bond coat properties in thermal barrier coatings under bending. Bulletin of Materials Science, 24 (2). pp. 203-209. Ray, Ashok K and Tiwari, Y N and Sinha, R K and Sinha, S K and Roy, P K and Singh, Raghubir and Chaudhuri, S (2001) Mechanical property evaluation and remaining life assessment of service-exposed steam pipe of boilers in a thermal power plant. High Temperature Materials and Processes, 20 (1). pp. 39-50. Rezai, B and Amini, A and Jorjani, E (2001) The floatation studies on coal fines from Galeran area of Iran. Journal of Metallurgy and materials Science, 43 (3). pp. 175-179. Roy, G G and Chaudhary, P N and Minj, R K and Goel, R P (2001) Dephosphorization of ferromanganese using BaCO3-based fluxes by submerged injection of powders: A preliminary kinetic study. Metallurgical and Materials Transactions B, 32 (3). pp. 558-561. Roy, Nilima and Ghosh, R N and Pandey, M C (2001) Modelling of interaction between creep and oxditaion behaviour for engineering materials. ISIJ International, 41 (8). pp. 915-921. Roy, Nilima and Godiwalla, K M and Chaudhuri, S and Ray, Ashok K (2001) Simulation of bond coat properties in thermal barrier coatings during bending. High Temperature Materials and Processes, 20 (2). pp. 103-116. Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2001) The effect of Mg treatment on the properties of Al–8.3Fe–0.8V–0.9Si alloy. Journal of Materials Processing Technology, 112 (1). pp. 6-11. Satendra, Kumar and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922. Satyanarayana, N V and Mall, R and Pal, A (2001) Fault-tolerant scheduling in distributed real-time systems. International Conference on Computer Networks and Mobile Computing, Proceedings . pp. 275-280. Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26. Sinha, Arvind and Agrawal, A and Das, S K and Ravi Kumar, B and Rao, Venkatesh and Ramachandrarao, P (2001) On the growth of monoclinic calcium carbonate in poly(vinyl alcohol). Journal of Materials Science Letters, 20 (17). pp. 1569-1572. Sinha, Arvind and Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Oriented arrays of nanocrystalline magnetite in polymer matrix produced by biomimetic synthesis. Materials Transactions, 42 (8). pp. 1672-1675. Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Biomimetic route to produce nanosized inorganic crystals. Scripta Materialia, 44 (8-9). pp. 1933-1936. Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Patterning of copper particles on polymeric surface. Journal of Materials Research, 16 (5). pp. 1354-1357. Sinha, S K and Godiwalla, K M and Shaw, D K and Sivaramakrishnan, C S (2001) Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions. Scandinavian Journal Of Metallurgy, 30 (2). pp. 103-107. Sivaprasad, S and Tarafder, S and Das, Swapan K and Ranganath, V R and Ray, K K (2001) The role of stereology in estimation of ductile fracture toughness of structural materials. Image Analysis in Materials and Life Sciences . pp. 86-95. Sivaramakrishnan, C S (2001) Solidification Processing of aluminium alloys. Journal of Metallurgy and materials Science, 43 (2). pp. 57-66. Srikanth, S and Chakravorty, M (2001) Non-isothermal thermoanalytical studies on the salt roasting of chalcopyrite using KCl. Thermochimica Acta, 370 (1-2). pp. 141-148. Srikanth, S and Chakravorty, M (2001) Thermoanalytical studies on the salt roasting of chalcopyrite using KCl. Analytical Chemistry (including News & Features), 370 (1-2). pp. 141-148. Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructural evolution during spray forming of an Al-18Si alloy. Journal of Materials Science Letters, 20 . pp. 27-29. Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructure and mechanical properties of Al–Si alloys produced by spray forming process. Materials Science and Engineering, 304-306 . pp. 555-558. Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91. Srivastava, V C and Upadhyay, A and Ojha, S N (2001) Microstructural features induced by spray forming of a ternary Pb–Sn–Sb alloy. Bulletin of Materials Science, 23 (2). pp. 73-78. Tripathy, T and Bhagat, R P and Singh, R P (2001) The flocculation performance of grafted sodium alginate and other polymeric flocculants in relation to iron ore slime suspension. European Polymer Journal, 37 (1). pp. 125-130. Udaya Bhaskar, K and Govindarajan, B and Rao, K K and Barnwal, J P and Venugopal, R and Jakhu, M R and Rao, T C (2001) Graphite rejection in a lead concentrate using gravity concentration techniques. Journal of Metallurgy and materials Science, 43 (1). pp. 25-31. Upadhyay, C and Verma, H C and Rath, C and Sahu, K K and Anand, S and Das, R P and Mishra, N C (2001) Mössbauer studies of nanosize Mn1−xZnxFe2O4. Journal of Alloys and Compounds, 326(1-2) . pp. 94-97. Vaish, A K and Biswas, P K and Humane, M M and Rao, D S and Goswami, N G (2001) Tribal system of iron making in India -R&D for optimum operation. Journal of Metallurgy and materials Science, 43 (3). pp. 213-220. Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Das, Goutam and Das, Swapan K and Kumar, R and Das, Samar (2001) Effect of thermo-mechanical processing on the microstructure and mechanical properties of micro alloyed steels. Journal of Metallurgy and materials Science, 43 (4). pp. 221-238. Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173. Vaish, A K and Singh, S D and Biswas, D K (2001) Cokeless cupola melting - An efficient and cost effective process for foundries. Journal of Metallurgy and materials Science, 44 (4). pp. 239-245. Venkateswarlu, K and Murty, B S and Chakraborty, M (2001) Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium. Materials Science and Engineering A, 301 (2). pp. 180-186. Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13. Book or NML PublicationRaj, Baldev and Jayakumar, T (2001) Assessment of Defects and Microstructures for Evaluating Damage in Pressure Retaining Components. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 85-104. ISBN 81-87053-62-3 Ranganath, V R (2001) Shaft Failures in Coal Handling Plants. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 32-38. ISBN 81-87053-62-3 Sankara Rao, K Bhanu and Nagesha, A (2001) Significance of Creep-Fatigue Interactions in Strctural Integrity Assessment. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 164-184. ISBN 81-87053-62-3 Singh, Raghubir (2001) Remaining Life Assessment of Engineering Components after Prolonged Creep Exposure: Some Issues and Case Histories. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 70-84. ISBN 81-87053-62-3 Singh, Raghubir (2001) Remaining life assessment of engineering components after prolonged creep exposure: some issues and case histories. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 70-84. ISBN 81-87053-62-3 Singh, S R (2001) Catastrophic carburisation in petrochemical industry. In: Recent trends in structural integrity assessment: proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 46-57. ISBN 81-87053-62-3 Singh, S R (2001) Catastrophic Carburisation in Petrochemical Industry. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. National Metallurgical Laboratory, Jamshedpur, Jamshedpur, pp. 46-57. ISBN 81-87053-62-3 Tarafder, S (2001) Fracture mechanisms and the quantification of fracture resistance. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3 Tarafder, S (2001) Fracture Mechanisms and the Quantification of Fracture Resistance. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3 Conference or Workshop ItemAgrawal, D P (2001) Prehistoric Copper Technology in India : A Review. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Balasubramaniam, R (2001) New Insights on the Corrosion Resistant Delhi Iron Pillar. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Bhattacharya, D K (2001) Non-Destructive Techniques for Microstructural and Structural Characterisation. In: UNSPECIFIED. Bhattacharya, D K (2001) Non-destructive techniques for microstructural and structural characterisation. In: UNSPECIFIED. Biswas, A K (2001) Minerals and their Exploitation in Ancient and Pre-modern India. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Chattoraj, I (2001) Notch effects in corrosive failure. In: UNSPECIFIED. Chattoraj, I (2001) Notch Effects in Corrosive Failure. In: UNSPECIFIED. Chaudhary, S K (2001) Investigation of Corrosion Affected Concrete Structures-A Systematic Approach. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Chaudhary, S K and Chaturvedi, A K (2001) Preventive and Protective Solution for Corrosion in Concrete through Chemistry. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Chaudhary, S K and Kurmaiah, N and Ghoshal, B T (2001) Performance of Concrete Exposed to Corrosive Environment. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Desai, P K (2001) Life Extension of Aircraft Components - An IAF Perspective. In: UNSPECIFIED. Dube, R K (2001) India's Contribution to the Mining, Extraction and Refining of Gold : Some Observations Related to the Pre-Christian Era. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Ghosh, R N (2001) Remaining life assessment of engineering components. In: UNSPECIFIED. Ghosh, R N (2001) Remaining Life Assessment of Engineering Components. In: UNSPECIFIED. Gourishanker, S (2001) Recent Techniques for Life Assessment of Boiler Components. In: UNSPECIFIED. Kumar, Sanjay and Kumar, Virendra and Prasad, M M (2001) Corrosion of Reinforced Concrete and Its Protection. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Kushwaha, H S and Vaze, K K and Bhasin, V (2001) Design Criteria for Fracture Assessment of Pressurized Nuclear Components. In: UNSPECIFIED. Mediratta, S R and Saha, Jayant K (2001) Recent Developments in Corrosion Protection of Steel Structures. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Mitra, A (2001) Damage assessment of process heater tube by magnetic technique : a case study. In: UNSPECIFIED. Mitra, A (2001) Damage Assessment of Process Heater Tube by Magnetic Technique :A Case Study. In: UNSPECIFIED. Prakash, B (2001) Ferrous Metallurgy in Ancient India. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Ray, Ashok K and Tiwari, Y N and Sahu, J K and Swaminathan, J and Roy, P K and Sinha, S K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Chaudhuri, S (2001) Effect of Oxide Scale Deposition on the Residual Life of Service Exposed Reheater Tubes in Boiler of a Thermal Power Plant. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Sasisekaran, B and Rao, B Raghunatha (2001) Iron in Ancient Tamilnadu. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Sharma, R K and Patel, L R and Bhatt, M M (2001) On Line Chemical Cleaning of Critical Heat Exchangers for Cooling Water Deposit and their Control to Sustain High Production Level of Methanol - An Experience and Case Study at GNFC. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, D D N and Dey, Mahuya (2001) Studies on Performance of Galvannealed Coatings and Other Type of Zinc Coatings. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, D D N and Ghosh, Rita (2001) Corrosion Resistance Performance of Fusion Bonded Epoxy Coated Rebars. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, D D N and Singh, B K and Ghosh, Rita (2001) Reliable evaluation techniques for localized corrosion damages. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001, NML Jamshedpur, India. Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, Ratnakar and Sengupta, P L and Pathak, P N and Chattopadhyay, A and Maulik, S C (2001) Floatation Studies on Processing of a Low Grade Uranium Ore. In: International Conference on Challenges in Coal and Mineral Beneficiation, , NML, Jamshedpur. Thakur, U P (2001) Toward the Concept of Designing Smart Corrosion Prevention System. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Thakur, V K (2001) Iron Technology and Social Change in Early India (350 B.C. - 200 B.C). In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Tripathi, V (2001) Emergence of Iron in India : Archaeological Perspective. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur. Varma, V N (2001) 100% Solid Polyurethane the Innovative Technology for Corrosion Protection. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Vijaya Kumar , T V and Prabhakar, S and Bhaskar Raju, G (2001) Interaction of Oleate Molecules on Sillimanite and Garnet minerals. In: Advances in surface science and engineering, 21-23 February, 2001, Chennai. Wasnik, D N and Samajdar, I and Kain, V and De, P K and Verlinden, B (2001) Corrosion and Grain Boundry Character Distribution(GBCD)in 316L Austenitic Stainless Steel. In: National Seminar on Corrosion and Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Yadav, M and Singh, K and Rastogi , R B and Singh, M M (2001) Substituted Thiobiurets as Corrosion Inhibitors for Mild Steel in L.ON Sulphuric Acid. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Yadav, P N and Kushwaha, S S (2001) Application of Polymer Complexes as Corrosion Inhibitor. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Project ReportsTarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur. |