Items where Year is 1990

A

Arora, S M (1990) Hot-Dip Aluminising of Ferrous Materials. NML Technical Journal, 32 (1-4). pp. 29-39.

Aush, S C and Sinha, P K and Sengupta, P L (1990) Production of Electrolytic and Activated Manganese Dioxide Simultaneously From a Single Flow Sheet. NML Technical Journal, 32 (1-4). pp. 40-46.

B

Bahadur, Aruna and Mohanty, O N (1990) Structural studies of calorized coatings on mild-steel. Materials Transactions JIM, 31 (11). pp. 948-953.

Balasubramanian, K J and Bhaskar Raju, G and Khangaonkar, P R (1990) Flocculation of iron ores using magnafloc polymers. Ind. Min. and Engg. Journal, July . pp. 7-13.

Banerjee, M K and Mukherjee, A N and Mukherjee, K P (1990) Potentiokinetic Behaviour of Copper and Manganese Bearing Stainless Steels. NML Technical Journal, 32 (1-4). pp. 11-17.

Batra, N K (1990) Mathematical Modelling of Shaft based direct Reduction processes of Iron manufacture with Recirculation of Moisture free flue Gases. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

Bhaskar Raju, G and Balasubramanian, K J and Khangaonkar, P R (1990) Zeta potential and flocculation behavior on iron ore fines using magnafloc polymers. Bulletin of Electrochemistry, 6 (10). pp. 836-839.

Bhattacharjee, S and Chatterjee, N N and Gupta, K K (1990) Gpack-i - an application software for drawing calibration curves. Computers & Chemistry, 14 (3). pp. 247-248.

C

Chatterjee, Amit (1990) Modelling of Rotary Kiln based Direct Reduction. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

Chattopadhyay, S (1990) Modeling Techniques for the Prediction of Phase Diagrams. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

D

Director, NML (1990) Annual Report 1987-1990. NML, Jamshedpur.

G

Ghosh, R N and Curtis, R V and MClean, M (1990) Creep deformation of single-crystal superalloys - modeling the crystallographic anisotropy. Acta Metallurgicaet Materiala, 38 (10). pp. 1977-1992.

Ghosh , R N (1990) Some Aspects of Modelling of the High Temperature Mechanical Behaviour of Nickel Base Superalloys. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedepur.

Gupta, P K (1990) Finite Elements Modelling of Forming Processes a State of the Art Review. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

J

Jacob, K T and Srikanth, S (1990) Physical Chemistry of the Reduction of Calcium Oxide with Aluminum in Vacuum. High Temperature Materials and Processes, 9 (2-4). 77- .

Jana , R K and Murthy, D S R and Nayak, A K and Mahanty, M S and Tiwary, S K and Akerkar, D D (1990) Leaching of roast-reduced polymetallic sea nodules to optimize the recoveries of copper, nickel and cobalt. International Journal of Mineral Processing, 30 (1-2). pp. 127-141.

K

Kumar, Rakesh and Ray, R K and Biswas, A K (1990) Physico-chemical nature and leaching behaviour of goethites containing Ni, Co and Cu in the sorption and coprecipitation mode. Hydrometallurgy, 25 . pp. 61-83.

Kumar, Vinay (1990) Filtration Studies of the Ammoniacal Leach Slurry of Polymetallic Sea Nodules. Indian Chemical Engineer, 32 (2). pp. 64-69.

Kumar , Vinay and Pandey , B D and Akerkar, D D (1990) Electrowinning of Nickel in the Processing of Polymetallic Sea Nodules. Hydrometallurgy, 24 (2). pp. 189-201.

L

Lal, Kishori and Bhattamishra, A K (1990) Studies on Structural Degradation of Aluminium/Alloy Conductor in L.T. Line in Coastal Regions. NML Technical Journal, 32 (1-4). pp. 3-10.

Lalitha, S and Chattopadhyay, S and Ghosh, R N (1990) Development of software on finite-element mesh generation (meshgen) for metallurgical applications. Engineering Fracture Mechanics, 36 (3). pp. 527-530.

M

Mehrotra, S P (1990) Mathematical Modelling of Contrinuous Casting of Steel Strips by Single Roll Process. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

Murthy, D S R (1990) Microbially enhanced thiourea leaching of gold and silver from lead zinc-sulfide flotation tailings. Hydrometallurgy, 25 (1). pp. 51-60.

Murthy, D S R (1990) Microbially enhanced thiourea leaching of gold and silver from lead zinc-sulfide flotation tailings. Hydrometallurgy, 25 (1). pp. 51-60.

N

Narang, S K and Sharma, M L (1990) On-line bibliographic databases: relevant information retrieval on demand. In: National seminar on Management of information industry in 21st century, 1990, JTI, Jamshedpur.

Narayan, S P and Rao, Venkatesh and Das, S and Mohanty, O N (1990) Microstructural and magnetic studies on thermomechanically treated hsla steel. Journal of Magnetism and Magnetic Materials, 88 (1-2). pp. 71-78.

P

Pandey, J L and Prakash, S and Mehta, M L (1990) Effects of varying the zirconium concentration and 1 wt-percent-y on high-temperature oxidation of fe-15wt-percent-Cr-4wt-percent-Al alloy under isothermal and cyclic conditions. Journal of The Less-Common Metals, 159 (1-2). pp. 23-34.

Pandey, J L and Prakash, S and Mehta, M L (1990) Effects of varying the zirconium concentration and 1 wt.% Y on high temperature oxidation of Fe-15wt.%Cr-4wt.%Al alloy under isothermal and cyclic conditions. Journal of the Less Common Metals, 159 ( ). pp. 23-24.

Parida, N and Das, Swapan K and Gope, P C and Mohanty, O N (1990) Confidence, and sample-size in fatigue testing. Journal of Testing and Evaluation, 18 (6). pp. 385-389.

Parida, N and Das, Swapan K and Gope, P C and Mohanty, O N (1990) Probability, confidence, and sample-size in fatigue testing. Journal of Testing and Evaluation, 18 (6). pp. 385-389.

Pati, B B and Chatterjee, P and Singh, T B and Singh, D D N (1990) Effect of propargyl alcohol on corrosion and hydrogenation of steel in hydrochloric-acid solution. Corrosion, 46 (5). pp. 354-359.

Prabhakar, S and Bhaskar Raju, G and Misra, V N and Khangaonkar, P R (1990) Studies on the Flotation of Mixed Oxide-Sulphide Ores of Copper from Malanjkhand Deposit India. In: Minerals, Materials and Industry, 2-6 July 1990, Edinburgh, scottland.

Prakash, S and Ray, H S (1990) Prediction of reduction kinetics of iron-ore under fluctuating temperature conditions. ISIJ International, 30 (3). pp. 183-191.

Prasad, Anant (1990) Mathematical Modelling and Application to Solidification in vertical continuous Casting Mould. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur.

R

Ranganath, V R and Pandey, R K and Kumar, A N (1990) A comparative study of various approaches for CTOD toughness evaluation. Engineering Fracture Mechanics, 37 (5). pp. 1059-1069.

Ranjitham, A M and Khangaonkar, P R (1990) Leaching behaviour of calcined magnesite with ammonium-chloride solutions. Hydrometallurgy, 23 (2-3). pp. 177-189.

S

Sharma, T L (1990) Structural Studies of the Anodic Oxide Films Formed on Aluminium and its Alloys. NML Technical Journal, 32 (1-4). pp. 18-28.

Singh, D D N and Singh, T B and Chatterjee, P and Patty, B B and Mukherjee, K P (1990) Chemical corrosion control for sour crude oil pipelines. Corrosion prevention & control, 37(2) . pp. 37-41.

Singh, R and Banerjee, S (1990) Morphological and compositional changes of the carbides in a ferritic steel after long term service exposure. Scripta Metallurgica et Materialia, 24 (6). pp. 1093-1098.

Srikanth, S and Jacob, K T and Iyengar, G N K (1990) Phase Equilibria in the Co-Ni-F System and Activities in (CoXNi1-X)F2 Solid solutions at 1373 K. High Temperature Science, 30 (1). pp. 11-18.