Number of items: 72.
A
Abhilash, and Pandey, B D (2012) Biohydrometallurgical Processing of Indian Uranium Ores. PhD thesis, Jadavpur University.
Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .
B
Baral, Jayashree (2011) Creep characterization of Boron added P91 steel in the temperature range 600 - 650 degree C. Masters thesis, National Metallurgical Laboratory (NML).
Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.
Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).
Bose, Debabrata (2013) Development of a Non-Invasive Technique Based on Infra-red Thermography to Detect and Estimate Iron in Galvannealed Coatings. Masters thesis, Bengal Engineering College and University, Shibpur.
C
Chaudhary, P N (1999) Dephosphorization of high carbon ferromanganese using BaCO3 based fluxes. PhD thesis, Indian Institute of Technology.
Chaudhuri, S (1993) Some aspects of creep behaviour of 2.25 Cr-1Mo Steel. PhD thesis, IIT Kharagpur.
Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML .
Cherian, Antony (2013) Composition analysis of minerals using non-invasive infrared thermography. Masters thesis, NIT Trichy.
Cherian, Antony (2014) A non-invasive technique for compositional analysis of coal. Masters thesis, NIT Trichy.
Cherian, Antony (2014) A Non-Invasive Technique for Compositional Analysis of Coal. Masters thesis, NIT Trichy.
Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur).
D
Das, Anindya (2011) High Strain Rate Tensile Deformation of Low Carbon Steels (OLP-0160). Masters thesis, National Metallurgical Laboratory (NML).
Das, Arpan (2012) Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel. PhD thesis, Jadavpur University.
Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University.
Dash, S (2009) Extraction of chitosan from bioresources and its application in biosorption. Masters thesis, National Metallurgical Laboratory (NML).
Dey, U K (2012) Fracture Behaviour of Dissimilar Metal Weld Materials 304 LNSS & SA508 Cl. 3 Steel in Nuclear Piping. Masters thesis, NIT, Jamshedpur.
Dutta, Abinash (2011) Biomimetic synthesis and characterization of calcium silicate and hydroxyapatite nanoparticles from natural sources (Rice husk ash and Mollusc shell). Masters thesis, CSIR-National Metallurgical Laboratory.
G
Ganguly, Koustav (2012) Combustion synthesis of Silver (Ag) modified Strontium hexaferrite (SrFe12O19) nanoparticles for magnetic photocatalysis applications. Masters thesis, Indian Institute of Technology Kharagpur.
Gomes, Leandra Saviola (2013) Synthesis of Biomimetic Ferrofluid with Apoferritin as a MRI Contrast Agent. Masters thesis, VIT University, Vellore-623014.
H
Hansdah, Kirtal (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Masters thesis, National Metallurgical Laboratory (NML).
Himadri, Roy (2011) Monotonic and cyclic fracture behaviour of AISI 304LN stainless steel. PhD thesis, Indian Institute of Technology, Kharagpur.
J
Jung, Kyung Bae (2012) Recovery of rare metals from e-waste using mechanical pre-treatment and hydrometallurgical techniques. Masters thesis, CSIR-National Metallurgical Laboratory.
K
Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .
Kulhara, Neelkamal (2015) Estimation of mositure in coke using non-invasive infrared thermography. Masters thesis, NIT Trichy.
Kumar, Ambuj (2007) Biomimetic synthesis and characterization of cobalt nanoparticles. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
Kumar, Binod and Pramanick, A K (2010) A Dissertation Report on Hydrophilic Coating on Glass Substrate. Masters thesis, National Institute of Foundry and Forge Technology, Hatia, Ranchi.
Kumar, M (2010) Synthesis, characterization and phase equilibrium of perovskite oxides and development of intermediate temperature solid oxide fuel cells. PhD thesis, University of Madras.
Kumar, Niraj (2012) The Effect of Laser Beam Overlapping on the Hardness and Microstructure of AISI 414O Steel at different Laser Power. Masters thesis, Ranchi University.
Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.
Kumari, Anjan (2017) Recovery and recycling of metals from waste PCBs using pyrolysis followed by hydrometallurgical processes and characterization. PhD thesis, National Institute of Technology (NIT), Jamshedpur, India.
Kumari, Manorama (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Masters thesis, National Metallurgical Laboratory (NML).
Kumari, Puja (2009) Biosorption of Cr(III) using native fungal species isolated from tannery effluents. Masters thesis, National Metallurgical Laboratory (NML).
L
Lee, Kwang Seok (2011) Recovery of rare earth metal neodymium (Nd) as value added product from scrap hard disc of personal computer (PC). Masters thesis, Korea Maritime University, South Korea.
M
Madhuri, S (2009) Studies on adaptive tolerance of aspergillus niger and penicillium species on hexavalent chromium and its applications in biosorption. Masters thesis, National Metallurgical Laboratory (NML).
Maity, S (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.
Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.
Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.
N
Narasaiah, N (2004) Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels. PhD thesis, IIT Kharagpur.
Noor, Aman (2012) Synthesis, characterisation and photocatalytic evaluation of modified titania based binary oxide materials. PhD thesis, NORTH ORISSA UNIVERSITY.
P
Panigrahi, Suchismita (2011) Synthesis Of Inorganic Particles From Natural Source And Their Characteristics. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
Park, Hong Ki (2011) Extraction of cobalt and lithium from waste lithium ion batteries of mobile phones. Masters thesis, Korea Maritime University, South Korea.
Paul, Surajit Kumar (2011) Experimentation and material modelling for cyclic plastic deformation behavior in Primary heat transport piping (PHT) materials. PhD thesis, Jadavpur University, Kolkata.
Prakash, Amit (2015) The effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless steel. Masters thesis, Indian Institute of Technology (BHU), Varanasi.
Prasad, Prabha (2002) Effect of Monotonic and Cyclic Loading on the Fracture Behavior of SA 333 Steel. PhD thesis, Indian Institute of Technology Kharagpur.
R
Ranjan, Ravi (2018) TEM characterization of micro-alloyed vanadium steel at different percent reduction of rolling. Masters thesis, CSIR-NML.
Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML.
Reddy, B V Ramana (2008) Microstructural variations in Al-Cu-Y systems under metastable conditions. Masters thesis, CSIR-NML .
Reddy, B V Ramana (2008) Microsturctural variation in Al-Cu-Y Sysytem Under Metastable condition. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
S
Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
Sahu, J K (2008) Effect of 475oC embrittlement on the fatigue behaviour of a duplex stainless steel. PhD thesis, University Siegen.
Sarkar, Samata (2008) Synthesis & Characterisation of Silicon nano Particles. Masters thesis, Bengal Engineering and Science Universiy, Shibpur.
Sasikumar, C (2009) The effect of mechanical activation on energetics and dissolution kinetics of Indian beach sand ilmenite. PhD thesis, IT, Banaras Hindu University Varanasi.
Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.
Seth, Prem Prakash (2014) Study of Bake-hardening behaviour of ultra-low carbon BH 220 steel at different strain rates. Masters thesis, National Institute of Technology, Rourkela.
Sharma, Arun Kumar (2012) Application of infrared thermography for gradation and sorting of iron ores. Masters thesis, NIT, Tiruchirapalli.
Sharma, Geetanjali (2012) Comparative Study on Biomimetically Synthesized Ferrofluid at different pH and Concentration. Masters thesis, Utkal University BBSR.
Sharma, Meenakshi (2010) Hydrophillic coating on Glass Substrate. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
Sheethal, S (2013) Evaluation and optimization of electromagnetic stirring (EMS) parameters for continuously cast high carbon billet quality using ultrasonic c-scan imaging. Masters thesis, NIT, Trichy.
Sheikh, Lubna (2012) Study of Novel Nanomagnetic Hydroxyapatite as a Potent Biomedical System. Masters thesis, NOU, Orissa.
Singh, Ajay (2013) Effect of overaload on fatigue crack propagation. Masters thesis, National Institute of Technology , Warangal.
Singh, Ashutosh Pratap (2014) Optimization of Strength of Micro-alloy Vanadium Steel by Fixing The Nitrogen Content& Varying The Vanadium Content. Masters thesis, CSIR-NML .
Singh, Krishna (2010) Optimization of parameters for Biosorption of Cr(III) by Aspergillus niger. Masters thesis, National Metallurgical Laboratory (NML).
Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML).
Srivastava, Nidhi and Abhilash, (2012) Bacterial Isolates in hexavalent chromium reduction:Applications form synthetic to real systems. Masters thesis, Trident Academy of Creative Technology (Utkal University).
T
Tarafder, Mita (2008) Fractal Analysis of Microstructural and Fractograpghic Images for Evaluation of Materials. PhD thesis, Jadavpur University.
To Duy, Ca (1999) Influence of Rare Earth Metals on the Nucleation and Precipitation of Slag Inclusions during Solidification of Molten Steel. PhD thesis, National Metallurgical Laboratory (NML).
Tope, Ogundele Damilola (2019) Synthesis, modification and application of nano structured ultra fine lead (II) oxide from spent automobile lead acid battery. PhD thesis, University of Ibadan, Ibadan, Nigeria.
U
Ullah, Wahadat (2007) Development of ultra- fine grained aluminium by severe plastic deformation. Masters thesis, National Metallurgical Laboratory.
V
Verma, Amit (2015) Central quality assessment of continuously cast high carbon billets using ultrasonic c-scan imaging. Masters thesis, NIT Trichy.
Y
Yadav, Abhishek (2021) Synthesis of nano crystalline nickel by severe plastic deformation. Masters thesis, CSIR-National Laboratory Jamshedpur, Jharkhand .
This list was generated on Mon Dec 30 16:22:45 2024 IST.
