Items where Subject is "Mathematical Modelling"

A

Arora, Punit and Gupta, Suneel K and Bhasin, V and Vaze, KK and Sivaprasad, S and Tarafder, S (2011) Multiaxial fatigue studies on carbon steel piping material of Indian PHWRs. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .

B

Balasubramaniam, R (1999) Delhi iron pillar rust characterization by x-ray diffraction analysis. NML Technical Journal, 40 (1). pp. 12-20.

C

Chakrabarti, D M (1986) A computer programme for calculating free settling terminal velocities. NML Technical Journal, 28 (1-4). pp. 3-9.

Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur).

D

Das, A and Manna, I and Pabi, S K (1996) Mathematical modelling of peritectic transformation in binary systems. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Das, Arpan (2012) Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel. PhD thesis, Jadavpur University.

Das, Arpan (2016) Spatial Martensite. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 658 (IF-3.094). pp. 484-489.

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Das, Moususmi and Das, G and Ghosh, M (2022) Prediction of Mechanical Properties of Sensitized Stainless Steel by Neural Network Modeling and Validation Using Ball Indentation Test. J Mats. Engg & Performance .

Das, S K (1996) An improved turbulence model for flow simulation in a continuous casting tundish for slabs. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P (2006) A Mathematical Model to Characterize Volatile Matter Evolution during Carbonisation in Metallurgical Coke Ovens. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2006), Nov, 2006, AETMME-2006.

Das, Suchandan K (2011) Application of a stochastic modelling framework to characterize the influence of different oxide scales on the solid particle erosion behaviour of boiler grade steel. Sadhana, 36 (4). pp. 425-440.

Das, Suchandan K (2012) Mathematical model to predict effects of fly ash hardness and angularity on erosion response of typical boiler grade steels. Tribology, 6 (2). pp. 84-92.

Das, Suchandan K (2011) Mathematical Modelling of Carbonisation Process in Stamp Charged Coke ovens. In: International Conference on Coal & Coke - 2011, April 7-8, 2011, Tata Steel, Jamshedpur, India.

Das, Suchandan K (1994) Mathematical simulation of the thermal Field during continuous casting process by a nonorthogonal coordinate Transformation formalism. Transaction of Indian Institute of Metals, 47 (1). pp. 57-66.

Das, Suchandan K (1993) Numerical formalism for solving heat transfer in continuous casting process by nonorthogonal co-ordinate transformation strategy. Scandinavian Journal Of Metallurgy, 22 . pp. 198-202.

Das, Suchandan K (1995) Process modelling of electromagnetic Stirring and segregation during continuous Casting of high carbon steel. Metals Materials And Processes, 7 (3). pp. 191-204.

Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Optimized Neural Network Model to Characterize the Effects of Process Parameters on the Separation Efficiency of Iron Ore by a High Intensity Magnetic Separator. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Das, Suchandan K and Das, Rashmita (2010) A Mathematical Model To Characterize Erosion Behaviour Of Boiler Grade Steels Impacted By Fly Ash In Coal Fired Power Plants. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Godiwalla, K M (2006) Heat transfer characterization in the mould of a high speed continuous steel slab caster. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan, 2006, IIT Guwahati.

Das, Suchandan K and Godiwalla, K M (2004) Mathematical modelling of carbonisation in Metallurgical coke making process. Metals Materials And Processes, 16 (2-3). pp. 327-338.

Das, Suchandan K and Godiwalla, K M (2006) Mathematical modelling of thermal transport processes in Coke oven. 18th National & 7th ISHMT - ASME Heat and Mass Transfer Conference . pp. 2154-2161.

Das, Suchandan K and Godiwalla, K M (2003) Phase-field approach - A paradigm shift in metallurgical solidification modelling. Indian Foundry Journal, 49 (7). pp. 17-22.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and De, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and Dey, P K (2008) A mathematical model to characterize effect of silica content in the boiler fly ash on erosion behaviour of boiler grade steel. Journal of Materials Processing Technology, 204 . pp. 239-247.

Das, Suchandan K and Godiwalla, K M and Hegde, Shubha and Mehrotra, S P and Dey, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2007) A mathematical model for prediction of physical properties of the coke oven charge during carbonisation. High Temperature Materials and Processes, 26 (1). pp. 43-57.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2006) A mathematical model to characterize volatile matter evolution during carbonisation in metallurgical coke ovens. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India.

Das, Suchandan K and Godiwalla, K M and Panda, Emila (2005) High speed continuous slab casting of steel _Prospects and pitfalls. In: International Conference on Continuous casting - Past, Present and Future, October 24-25, 2005, Jamshedpur.

Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical Modelling of Seperation Behaviour of a Spiral for Washing high ash Coal. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME -2006), Nov, 2006, AETMME -2006.

Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical modeling of separation behaviour of a spiral for washing high ash coal. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India.

Das, Suchandan K and Goel, R P and Mehrotra, S P (2006) Mathematical Modelling of Blast Furnace Processes for Characterisation of the Internal State. Steel Tech, 1 (1). pp. 25-33.

Das, Suchandan K and Hedge, Shubha S and Dey, P K and Mehrotra, S P (2008) Erosion-Oxidation Response of Boiler Grade Steels: A Mathematical Investigation. Research Letters in Materials Science (542161). pp. 1-4.

Das, Suchandan K and Hedge, Shubha S and Godiwalla, K M and Mehrotra, S P and Dey, P K (2008) A Probabilistic Model to Characterize Erosion-Oxidation Damage on Boiler Grade Steel Impacted by Solid Particle. Journal Of Tribology, 130 . 041601-1.

Das, Suchandan K and Kumari, Amrita and Bandopadhay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furna. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Sabita (2010) A Multi-Input Multi-Output Neural Network Model To Characterize Mechanical Properties Of Strip Rolled High Strength Low Alloy (HSLA) Steel. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Das, Suchandan K and Mehrotra, S P and Godiwalla, K M (2010) Technological advances in Refining and Processing of stainless Steel - A brief overview. In: Advances in Stainless Steel. Series in Metallurgy and Materials Science . University Press of India Pvt, Hyderabad, pp. 431-452. ISBN 9788173716966

Dash, Sukanta K and Ajmani, S K (1996) A fluid dynamic analysis of the blast furnace trough at Tata Steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Datta, A K (2015) Optimization of Process Parameters by Reliability-Based Uncertainty Modeling of Cold Rolling Process. In: Internatioanl Seminar on 'Innovative Technologies for clean, green and Automated Steel Plants: A better Tomorrow”, 10th to 11th Sep, Taj Bengal Hotel, Kolkata, India .

Datta, A K and Sivaprasad, S and Prasad, P (2015) Control of Earthquake Resistant High Rise Steel Frame Structures. In: International Seminar on 3rd Annual International Conference on Architecture and Civil Engineering (ACE 2015), 13-14 April 2015, Singapore.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur.

Director, NML (2014) Annual Report 2013-2014. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Dlouhy, Ivo and Tarafder, Mita and Hadraba, Hynek (2011) Micromechanical Aspects of Transgranular and Intergranular Failure Competition. Key Engineering Materials , 465 (1.00 (SCI)). pp. 399-402.

G

Ghosh, R N (1996) Creep life prediction of single crystal superalloys. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Godiwalla, K M and Ranganathan, S and Hait, Jhumki (1996) Mathematical modelling and the influence of process para-meters on the temperature profile in a submerged arc furnace producing ferro-chromium. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

H

Hore, S and Das, Suchandan K (2013) Monte Carlo simulation of microstructure evolution during thermo-mechanical rolling of steel using grid computing technology. In: National conference on Parallel Computing Technologies (PARCOMPTECH-2013), 21-23 FEB 2013, Bangalore.

Hore, S and Das, Suchandan K (2012) Monte Carlo Simulation of temperature dependence of grain growth kinetics in C-Mn Steel prior to hot rolling. In: Proceedings of the 3rd Asian Symposium on Materials & Processing (ASMP 2012), 30-31, August 2012, IIT Madras, Chennai.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2015) Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. Journal of Manufacturing Processes, 17 (IF-1.528). pp. 78-87.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2012) Monte Carlo simulation of influence of reheat temperature on austenite grain growth in C‐Mn steel. Materials Science and Technology, 28(6) (IF-0.751). pp. 711-718.

Hore, S and Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Data-Based Performance Modelling of Hydrocyclone for Processing Iron Ore Fines. In: International Seminar on Mineral Processing Technology (MPT-2011), Oct 20, 2011, Udaipur, India.

J

Johri, M and Shukla, I and Bhattacharjee, D and Ghosh, K S (1996) Evaluation of efficacy of ceramic paper in controlling heat loss from steel ladles by mathematical modelling. In: Proceedings of Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

K

Khaira, H K and Jena, A K (1996) On modeling of the Ae3 temperature of steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kulgod, R and Kumar, R and Gaonkar, K B and Singh, P R (1996) Computerised control and data acquisition for corrosion experiments. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kumar, Roshan and Kumar, Sunil and Sahu, Ranjan K (2024) Mechanistic investigation of hydrogen generation from water and magnesium catalyst reaction: Advanced reactive molecular dynamics simulation. International Journal of Hydrogen Energy, 52 (8.1).

Kumar, Krishna and Das, Suchandan K and Kumar, Manoj (2020) Heat transfer modelling of dropwise condensation behaviour of magnesium vapours in the electrothermal production of magnesium. Canadian Metallurgical Quarterly, 59(2) (IF-1.456). pp. 134-150.

Kumar, Rashmi and Chandra, Sanjay (1996) Prediction of dissolution time of gerromanganese in hot metal and steel bath. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Kumar, Sunil (2017) Graphene engendered 2-D structural morphology of aluminium atoms: Molecular dynamics simulation study. Materials Chemistry and Physics, 202 (2.084). pp. 329-339.

Kumar, Sunil (2018) Graphene Engendered aluminium crystal growth and mechanical properties of its composite: An atomistic investigation. Materials Chemistry and Physics, 201 (IF-2.084). pp. 41-48.

Kumar, Sunil (2020) Structural Evolution of Iron–Copper (Fe–Cu) Bimetallic Janus Nanoparticles during Solidification: An Atomistic Investigation. The Journal of Physical Chemistry C, 124 (IF-4.309). pp. 1053-1063.

Kumar, Sunil (2024) Structural phase transformation in single-crystal Fe–Cr–Ni alloy during creep deformation using molecular dynamics simulation and regression-based machine learning methodology. Bulletin of Materials Science .

Kumar, Sunil (2018) Wettability and Structural Evolution of Gold over a Single-Walled Carbon Nanotube: An Atomistic Investigation. The Journal of Physical Chemistry C, 122 (IF-4.484). pp. 16346-16355.

Kumar, Sunil and Das, Suchandan K (2018) Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: An atomistic investigation. Journal of Alloys and Compounds, 740 (IF-3.133). pp. 626-638.

Kumar, Sunil and Mishra, T (2020) Organization of Bio-Molecules in Bulk and Over the Nano-Substrate: Perspective to the Molecular Dynamics Simulations. In: Biointerface Engineering: Prospects in Medical Diagnostics and Drug Delivery. Springer Nature Singapore, pp. 149-166.

Kumar, Sunil and Mishra, T (2020) Shock wave induced exfoliation of molybdenum disulfide (MoS2) in various solvents: All-atom molecular dynamics simulation. Journal of Molecular Liquids, 314 (5.065). p. 113671.

Kumar, Sunil and Mishra, T and Mahata, Avik (2020) Manipulation of mechanical properties of monolayer molybdenum disulfide: Kirigami and hetero-structure based approach. Materials Chemistry and Physics, 252 (IF-3.408). p. 123280.

Kumar, Sunil and Mishra, Trilochan and Sahu, Ranjan K (2022) Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation. Journal of Material Chemistry C, 10 (8.06). pp. 12091-12105.

Kumar, Sunil and Sahu, Ranjan K (2023) Aluminum nanotubes as an efficient catalyst for hydrogen production via thermochemical water splitting: a reactive molecular dynamics simulation. Physical Chemistry Chemical Physics .

Kumar, Sunil and Sahu, Ranjan K (2024) Fe–Al core-shell structure as an efficient catalyst for dual hydrogen production and storage by thermochemical water splitting: A reactive molecular dynamic simulation. International Journal of Hydrogen Energy .

Kumar, T S Prasanna (1996) Performance analysis of an efficient finite element solver for solidification simulation of continuous casting of steel billets. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2015) Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks. Journal of The Institution of Engineers (India) . pp. 2250-2122.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2014) A neural network model for quantitative prediction of oxide scale in water walls of an operating Indian coal fired boiler. Research and Review in Electrochemistry, 5(6) . pp. 155-168.

M

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Mandal, G K and Balasubramaniam , R and Mehrotra, S P (2008) Effect of several process parameters on interfacial aluminum rich layer in galvanized coatings. In: International Seminar on Prospect, Problems and Potential of Coated Steels’ Edited by M. Datta, N. Bandyopadhyay, S. Chakrabarti, S. Chandra and T. Venugopalan, February 14-16, 2008, organized by IIM Jamshedpur chapter and TATA STEEL, Jamshedpur, .

Manjhi, S P and Ramachandran, N and Nalla, R N and Bajpai, M K and Tripathi, P K (1996) Mathematical model for predicting solidification and cooling of steel inside mould and in air. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Laboratory, Dec. 10-11, 1996, NML, Jamshedpur.

Meyer, C and Ellendt, N and Srivastava, V C and Uhlenwinkel, V (2012) Cooling conditions for the generation of bulk metallic glass by droplet deposition. International Journal of Materials Research, 103(9) (IF-). pp. 1090-1095.

Mishra, Sanak and Santra, A K and Gupta, V K (1996) Computer applications in steel industry. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Mohanty, Sunati and Das, Suchandan K and Majumder, A K (2020) Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Online 29th Oct, 2019 .

N

Nanda, T and Kumar, B Ravi and Singh, V (2017) A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels. Journal of Materials Engineering and Performance, 26(1) (IF-1.331). pp. 5180-5187.

P

Pal, J and Singh, S and Ghosh, A K and Mohan, S (2002) A mathematical model for end point control of basic oxygen steel making furnace. Journal of Metallurgy and materials Science, 44 (1). pp. 39-49.

Pattanayak, S and Dey, Swati and Chatterjee, S and Ghosh Chowdhury, S and Datta, S (2015) Computational intelligence based designing of microalloyed pipeline steel. Computational Materials Science, 104 (IF-1.879). pp. 60-68.

Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2017) Effect of loading conditions on nucleation of nano void and failure of nanocrystalline aluminum: An atomistic investigation. Engineering Fracture Mechanics, 176 (IF-2.151). pp. 257-262.

Paul, Surajit Kumar and Tarafder, S (2013) Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, 101 (IF-0.989). pp. 81-90.

Prakash, Amit and Lal, Radha Krishna and Choubey, Vikas Kumar and Dwivedi, J P and Singh, V P (2015) Study of Residual Stresses in I sectioned bars of Linear Work-Hardening Materials under Torsion. 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI 2015) . pp. 299-310.

R

Ramachandrarao, P (1996) Modelling : Philosophies and Methodologies. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Rao, B V Subba and Ballal, N B (1996) Dynamic refining control model for LD converter. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Ravichandran, G and Raghupath, V P and Ganesan, N (1996) Analysis of welding distortion using finite element method. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Roy, A and Dhang, N and Gupta, O P and Manna, I (1996) Mathematical modelling of austempering by finite element method. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Roy, Nilima and Ghosh, R N and Bose, S C and Swaminathan, J (2007) A Stochastic Model for Assessment of Creep damage. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Roy, S and Anand, S and Sutradhar, G and Mandal, A and Iyer, K S (1996) Development of a knowledge based expert system on casting defects. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

S

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S. N. and Sagar, Sarmishtha (2023) Probability Analysis in Predicting Creep Life of Power Plant Material Using High Power Ultrasound. Journal of Materials Engineering and Performance . (In Press)

Sanyal, D (1996) Application of artificial intelligence to modelling of materials performance and processing. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Shah, Minal and Das, Suchandan K (2018) An Artificial Neural Network Model to Predict the Bainite Plate Thickness of Nanostructured Bainitic Steels Using an Efficient Network-Learning Algorithm. Journal of Materials Engineering and Performance . pp. 1-11. (In Press)

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Shikuku, V O and Mishra, T (2021) Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isotherms. Applied Water Science, 11(6) .

Singh, Vikas and Das, Suchandan K (2018) Mathematical Model and Plant Investigation to Characterize Effect of Casting Speed on Thermal and Solidification Behavior of an Industrial Slab Caster. ISIJ International, 423 . pp. 1-10.

Sreedhar, D and Sitaraman, T S and Ramachandran, C S (1996) Process control & instrumentation for titanium sponge plant. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Sreenivas, T and Sakthivel, N and Sankar, B Ravi and Ramakrishnan, S S (1996) A database management system for selection of steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Srinivas , S and Rao, K V Rama (1996) Development of a creep data base management system for engineering materials. In: Proceedings of the National Seminar on Computer Applications on Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

T

Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhaumik, S (2012) Microstructural damage evaluation in Ni-based superalloy gas turbine blades by fractal analysis. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhumik, S K (2013) Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis. Procedia Engineering, 55 . pp. 289-294.

Tarafder, Mita and Tarafder, S and Dash, Byomkesh and Dey, Swati and Sivaprasad, S and Das, Swapan K (2006) Modelling of Crack-tip Blunting using Finite Element Method (FEM) (GAP-0088). Grant in Aid (GAP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Advances in computer-aided crack length measurement during fatigue crack growth testing. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

V

Verma, Amit (1996) Computerised model for materials handling in a large mineral processing based organization. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Vijayalakshmi, P and Kannan, K and Subramanian, K (1996) Numerical control of laser processing and simulation of microstructures and temperature profiles - a fuzzy approach. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.