Items where Subject is "Materials Science > Tribology"

Article

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2006) Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance. Materials Chemistry and Physics, 99 (2-3). pp. 300-308.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2005) Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190 (1). pp. 115-121.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Materials Science, 44 (2). pp. 433-440.

Munda, Parikshit and Dube, R K and Basu, Bikramjit and Koria, S C (2009) Friction and wear properties of steel backed Al–10Sn–4Si–1Cu metallic strips prepared via spray atomization–deposition-rolling route. Surface & Coatings Technology, 203 (23). pp. 3541-3548.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts. Surface and Coatings Technology, 201 (6). pp. 2181-2192.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Effect of temperature on the fretting corrosion of tin plated copper alloy contacts. Wear, 262 (3-4). pp. 320-330.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2008) Fretting corrosion of tin-plated contacts. Tribology International, 41 (7). pp. 616-628.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2007) Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics. Tribology International, 40 (3). pp. 548-559.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Fretting wear behaviour of Tin plated contacts: Influence on contact resistance. Surface Review and Letters (srl), 13 (5). pp. 635-644.

Prasad, B K and Venkateswarlu, K and Das, S and Jha, A K and Dasgupta, R (1997) Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load. Material Science letters, 16 . pp. 1113-1115.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Evaluation of the performance of electroless Ni-B coated brass contacts under fretting conditions. Surface Review and Letters (srl), 15 (4). pp. 443-452.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature. Tribology International, 41 (2). pp. 87-102.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Fretting corrosion of lubricated tin-plated contacts. Industrial Lubrication and Tribology, 60 (5). pp. 233-241.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2007) Fretting-corrosion mapping of tin-plated copper alloy contacts. Wear, 262 (1-2). pp. 228-233.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Srivastava, V C and Rudrakshi, G B and Uhlenwinkel, V and Ojha, S N (2009) Wear characteristics of spray formed Al-alloys and their composites. Journal of Materials Science (9). pp. 2288-2299.

Venkateswarlu, K (1996) Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium - silicon alloys. Material Science letters, 15 . pp. 1773-1776.

Book or NML Publication

UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8

Sankara Narayanan, T S N (2011) Role of nanomaterials on tribocorrosion. In: Corrosion protection and control using nanomaterials. Woodhead Publishing Ltd., UK, Cambridge, pp. 1-77.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro‐ and electroless composite coatings. In: ENCYCLOPEDIA OF TRIBOLOGY . Springer‐Verlag GmbH, Heidelberg, pp. 1-11.

Project Reports

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Thesis

Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.