Items where Division is "Metal Extraction and Forming" and Year is 2013

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | J | K | M | N | P | R | S | T | V
Number of items: 81.

A

Abhilash, (2013) Interview in Down to Earth Magazine. Down to Earth Magazine, February . p. 41.

Abhilash, and Mehta, K D and Pandey, B D (2013) Bacterial leaching kinetics for copper dissolution from a lowgrade Indian chalcopyrite ore. Rem: Revista Escola de Minas, 66(2) (IF-0.785). pp. 245-250.

Abhilash, and Pandey, B D (2013) Bioreactor leaching of uranium from a low grade Indian silicate ore. Biochemical Engineering Journal, 71 (IF-2.645). pp. 111-117.

Abhilash, and Pandey, B D (2013) Microbial processing of apatite rich low grade Indian uranium ore in bioreactor. Bioresource Technology, 128 (IF-4.980). pp. 619-623.

Abhilash, and Pandey, B D (2013) Microbially Assisted Leaching of Uranium—A Review. Mineral Processing and Extractive Metallurgy Review, 34 . pp. 81-113.

Abhilash, and Pandey, B D and Singh, A K (2013) Comparative Performance of Uranium Bioleaching from Low Grade Indian Apatite Rock in Column and Bioreactor. Energy Procedia, 39 . pp. 20-32.

Agarwal, Sanjay and Ghorai, S and Pal, J and Ghosh, Dinabandhu (2013) Chromite ore fines sintering for ferrochrome production. In: 26th National convention of metallurgical and material engineers & National seminar LGO 2013 of Institution of Engineers (India), 22-23rd January, Jamshedpur.

Alex, T C and Kalinkin, A M and Nath, S K and Gurevich , B I and Kalinkina, E V and Tyukavkina, W and Kumar, Sanjay (2013) Utilization of zinc slag through geopolymerization: Influence of milling atmosphere. International Journal of Mineral Processing, 123 (IF-1.378). pp. 102-107.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) High Energy Milling of Boehmite: Changes in Particulate Characteristics. In: Proceedings of the XIII International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December, 2013, IMMT, Bhubaneswar.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2013) Leaching behaviour of high surface area synthetic boehmite in NaOH solution. Hydrometallurgy, 137 (IF-2.169). pp. 23-32.

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

Anand, Amit and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recycling of Precious Metal Gold from Waste Electrical and Electronic Equipments (WEEE): A review. In: Proceeding of the XIII International Seminar on Mineral Processing Technology, 10/12/2013 To 12/12/2013, CSIR-IMMT, Bhubaneswar.

B

Balaz, Peter and Achimovičová, M and Baláž, Matej and Billik, Peter and Cherkezova-Zheleva, Zara and Criado, José Manuel and Delogu, Francesco and Dutková, Erika and Gaffet, Eric and José Gotor, Francisco and Kumar, Rakesh and Mitov, Ivan and Rojac, Tadej and Senna, Mamoru and Streletskii, Andrey and Wieczorek-Ciurowa, Krystyna (2013) Hallmarks of mechanochemistry: from nanoparticles to technology. Chemical Society Reviews, First published on the web 04 Apr 2013 (IF-28.76). pp. 1-67.

Bhattacharya, M and Sahu, Ranjan K and Ghosh, M and Das, S K and Mahato, B K and Goel, R P (2013) Chemical Synthesis of magnetic Co and CoNi nanoparticles and their characterization. Exploratory (OLP). CSIR -NML, Jamshedpur. (Submitted)

C

Choubey, Pankaj K and Jha, Manis K and Sahu, S K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun and Pathak, Devendra Deo (2013) Solvent extraction (SX) and separation of Sn/ Pb from the leach liquor of waste solder material and effluents. In: Proceedings of the XIII lnternolionol Seminar on Mineral Processing Technologt (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

D

Dhal, B and Abhilash, and Pandey, B D (2013) Process optimization for bio-beneficiation of a chromite concentrate by a Cr(VI) reducing native microbe (Bacillus sp.). International Journal of Mineral Processing, 123 (IF-1.378). pp. 129-136.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2013) Characterizing toxic Cr(VI) contamination in chromite mine overburden dump and its bacterial remediation. Journal of Hazardous Materials, 260 (IF-4.173). pp. 141-149.

Dhal, B and Pandey, B D (2013) Microbial Biosorption of metal contaminants: An Environment friendly process. In: Advances in Biotechnology. Studium Press LLC, NEW DELHI, pp. 125-152. ISBN 1-626990-13-1

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2013) Chemical and microbial remediation of hexavalent chromium from contaminated soil and mining/metallurgical solid waste: A review. Journal of Hazardous Materials, 250-251 (IF-4.173). pp. 272-291.

Director, NML (2013) 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores : Challenges, Problems & Solutions LGO-2013. In: 26th National Convention of Metallurgical and Materials Engineers & National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores. CSIR-NML, 2013, pp. 1-312.

G

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2013) Microbial upgradation of Meghalaya coal by Rhodococcus rhodochrous and Pseudomonas aeruginosa. In: Proceedings of XIII international seminar on Mineral Processing Technology, 10-12, December 2013, Bhubaneswar.

Ghosh, Rachit and Kumar, Anil and Kumar, Sanjay (2013) Flyash Geopolymer Concrete as Future Concrete. International Journal of Advanced Scientific and Technical Research, 6(3) . pp. 260-271.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of copper and iron on the wear properties of spray formed Al–28Si alloy. Materials & Design, 51 (IF-2.913). pp. 383-390.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of Cu and Mg on the wear properties of spray formed Al -22Si alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of secondary processing on the microstructure and wear behavior of spray formed Al–30Mg 2 Si–2Cu alloy. Materials & Design, 47 (IF-2.913). pp. 489-496.

J

Jha, Amrita Kumari and Jha, Manis K and Kumar, Vinay and Sahu, Rina (2013) Recovery of neodymium as value added product NdF3 from rare earth magnet. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Jha, Amrita Kumari and Jha, Manis K and Kumari, Anjan and Sahu, S K and Kumar, Vinay and Pandey, B D (2013) Selective separation and recovery of cobalt from leach liquor of discarded Li-ion batteries using thiophosphinic extractant. Separation and Purification Technology, 104 (IF-2.921). pp. 160-166.

1660DEL2013 (2013) A process for the recovery of neodymium as a value added product from waste hard disk of personal computers. 0086NF2012.

Jha, Manis K and Kumari , Anjan and Jha, Amrita Kumari and Kumar, Vinay and Hait, Jhumki and Pandey, B D (2013) Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone. Waste Management, 33(9) (IF-2.485). pp. 1890-1897.

Jha, Manis K and Lee, Jae-chun and Kim, Min-seuk and Jeong, Jinki and Kim, Byung-Su and Kumar, Vinay (2013) Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy, 133 (IF-2.027). pp. 23-32.

Jun, Minji and Kumar, Vinay and Jha, Manis K (2013) Recovery of Indium from scrap LCD monitors. Training Report (TR). CSIR-NML. (Submitted)

Jun, Sang Hee and Jha, Manis K and Hait, Jhumki and Sahu, S K (2013) Rare earth characterizations & processing for the metal La recovery. Training Report (TR). CSIR-NML. (Unpublished)

K

Kalinkin, A M and Alex, T C and Nath, S K and Gurevich, B I and Kalinkina, E V and Tyukavkina, V V (2013) Geopolymers Based on Mechanically Activated Non-Ferrous Slags. Chemistry for Sustainable Development, 6 (IF-). pp. 647-655.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of Ammonium Paratungstate Generated During Hydrometallurgical Processing of Copper-Tungsten(W-Cu) Borings. In: 17 th International Conference on Non-ferrous Minerals and Metals 2013, 5-6 July, 2013, Ranchi.

Kumar, Sanjay and Garcia-Trinanes, P and Teixeira-Pinto, A and Bao, M (2013) Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag. Cement & Concrete Composites, 40 . pp. 7-13.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Separation and Purification Technology, 111 (IF-2.921). pp. 145-154.

Kumari, Anjan and Kumar, Vinod and Jha, Manis K and Soni, B K (2013) Processing of poly-cracked ash of printed circuit boards for recovery of valuable and rare metals. In: Proceedings of the XlIl lnternationol Seminar on Mineral Processing Technology (MPT-20I3), 10/12/2013 to 12/12/2013, CSIR-IMMT, Bhubaneswar.

Kumari, Anjan and Singh, Rajendra Prasad and Jha, Manis K and Kumar, Vinay (2013) Extraction of copper from small electronic devices populated on discarded PCBs. Journal of Indian Chemical Society , 90 . pp. 2121-2126.

Kumari, Archana and Jha, Manis K and Hait, Jhumki and Sahu, S K and Kumar, Vinay (2013) Processing of Korean monazite concentrate for the recovery of rare earth metals (REMs). Journal of Indian Chemical Society, 90 . pp. 2105-2110.

M

Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.

Mandal, D and Viswanathan, S (2013) Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite. Materials Characterization, 86 . pp. 21-27.

Meshram, Pratima and Sinha, Manish K and Sahu, S K and Khan, Pritam and Pandey, B D and Mankhand, T R (2013) Solvothermal synthesis of high value copper powder from copper bleed solution of an Indian copper smelter. Powder Technology, 233 (IF-2.265). pp. 335-340.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Muralikrishna, A and Bagui, S and Mazumdar, D (2013) Modeling and Measurements of Intermixing Time in a Water Model of a Four Strand Steelmaking Tundish System. Transaction of Indian Institute of Metal, 66(3) . pp. 281-285.

N

Nath, S K and Kumar, Sanjay (2013) Influence of iron making slags on strength and microstructure of fly ash geopolymer. Construction and Building Materials, 38 (IF-1.834). pp. 924-930.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2013) Enhancing the adsorption of chromium(VI) from the acidic chloride media using solvent impregnated resin (SIR). Chemical Engineering Journal, 219 . pp. 174-182.

P

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit and Goel, U S and Venugopalan, T (2013) Surface Wave Based Ultrasonic Technique for finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls. Steel Research International, 84(2) . pp. 163-168.

Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209.

Pramanik, Swati and Purohit, Bijoy Kumar and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical Beneficiation of Physically treated Hingula coal on Laboratory scale. In: Proceedings of the XIII lnternational Seminar on Mineral Processing Technology (MPT-20 I 3), 10/12/2013 to 12/12/2014, CSIR-IMMT, Bhubaneswar.

Pramanik, Swati and Sahu, S K and Meshram, Pratima and Pandey, B D (2013) Arsenic removal from spent liquor generated during processing of vanadium sludge. Advanced Materials Research: Harnessing of Nonferrous Minirals, Metals and Wastes, 828 . pp. 55-63.

Prasad, Sanjay (2013) Recycling of zinc dross to produce electrolytic zinc powder. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 163-169.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2013) Chemical beneficiation of hingula coal. 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 89-93.

R

Raju, K and Goudar, D M and Srivastava, V C and Rudrakshi, G B (2013) Wear behavior of secondary processed spray formed Al-28Si-5Cu-4Mg alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Randhawa, N S and Das, N N and Jana, R K (2013) Adsorptive remediation of Cu(II) and Cd(II) contaminated water using manganese nodule leaching residue. Desalination and Water Treatment, Online (IF-0.825). pp. 1-15.

Randhawa, N S and Das, N N and Jana, R K (2013) Cadmium removal using waste residue generated after recovery of base metals from manganese nodules. Indian Journal of Chemical Technology (0.61). pp. 371-379.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2013) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, Online (IF-1.80). pp. 1-7.

Randhawa, N S and Dwivedi, Deepak and Prajapati, Sonu and Jana, R K (2013) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. Proceedings of 26th National Convention of Metallurgical and Materials Engineers & National Seminar (Non-SCI). pp. 186-196.

Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi.

Randhawa, N S and Jana, R K (2013) Lead sorption by sea nodule residue generated in reduction roasting – ammonia leaching. In: Mineral Processing Technology- 2013, 10-12 December 2013, Bhubaneshwar.

Randhawa, N S and Katiyar, P K and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2013) Anodic dissolution behaviour of tungsten carbide scraps in ammoniacal media. In: 17th Int. Conf. on non-ferrous Met. 2013, 5-6 July 2013, Ranchi (India).

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.

Reddy, G J and Srivastava, V C and Rudrakshi, G B (2013) Wear Behavior Of Spray Formed Al–20 Mg 2 Si Alloy. International Journal of Engineering Research & Technology, 2(2) . pp. 1-9.

Rudrakshi, G B and Goudar, D M and Srivastava, V C (2013) A Comparative Study on Microstructure and Tensile Properties of Spray Formed and Ascast Al-28Si-5Cu-4Fe and Al-28Si-5Cu-4Mg Alloys. In: World Congress on Engineering 2013, July 3-5, 2013, London, UK.

S

Sahoo, K L and Sahu, Rina (2013) Glass transition and crystallization of Al–Ni–La based metallic glasses studied by temperature modulated DSC. Journal of Non-Crystalline Solids, 365 (IF-1.597). pp. 33-36.

Sahu, K K and Agrawal, A and Mishra, D (2013) Hazardous waste to materials : Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management, 125 (IF-3.057). pp. 68-73.

Samal, S and Ray, Ajoy K and Bandopadhyay, A (2013) Proposal for resources, utilization and processes of red mud in India - A review. International Journal of Mineral Processing, 118 (IF-1.378). pp. 43-45.

Shin, Doyun and Jeong, Jinki and Lee, Sujeong and Pandey, B D and Lee, Jae-chun (2013) Evaluation of bioleaching factors on gold recovery from ore by cyanide-producing bacteria. Minerals Engineering, 48 (IF-1.207). pp. 20-24.

Srivastava, Sachin and Mandal, Durbadal (2013) Effect of Mechanical Processing and Heat Treatment on Micro-structural Analysis of 7075 Aluminium Alloys. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2013) Synthesis of bulk amorphous and nano-crystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Saarivirta, E.H. and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2013) Development of bulk quasicrystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29.

T

Tilak, Raj and Humane, M M (2013) Study of Microstructure and Texture of Cold Rolled Grain Oriented Electrical Steels. Training Report (TR). CSIR-NML, Jamshepur. (Unpublished)

V

Vaish, A K and Singh, S D and Minj, R K and Gupta, R C (2013) Exploration and Exploitation of Multi-Metallic Magnetite Ore of Nagaland for Value Added Product. Transactions of the Indian Institute o Metals, 66(5-6) (IF-0.215). pp. 491-499.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R and Singh, S K and Satpathy, B K and Srinivasarao, G (2013) Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material. Metallurgical and Materials Transactions B , 44 (IF-1.212). pp. 800-808.

Vijayendra, G V and Humane, M M (2013) Study of Microstructure and Texture of Cold rolled Grain Oriented Electrical Steels. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

This list was generated on Tue Aug 16 00:24:13 2022 IST.