Items where Division is "Metal Extraction and Forming" and Year is 2007

Article

Agrawal, A and Bagchi, D and Kumari, S and Kumar, Vinay and Pandey, B D (2007) Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Powder Technology, 177 (3). pp. 133-139.

Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Recovery of copper powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Minerals Engineering, 20 (1). pp. 95-97.

Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66.

Balasubramani, N and Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb and Sb additions on the precipitation kinetics of AZ91 magnesium alloy. Materials Science and Engineering A, 457 (1-2). pp. 275-281.

Chakraborty, D and Ranganathan, S and Sinha, S N (2007) Reduction of Chromite ore at different flow rates of inert gas. INFACON XI. pp. 153-158.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J (2007) Processing of rayon waste effluent for the recovery of zinc and separation of calcium using thiophosphinic extractant. Journal of Hazardous Materials, 145 (1-2). pp. 221-226.

Kumar, Manoj and Mankhand, T R and Murthy, D S R and Mukhopadhyay, R and Prasad, P M (2007) Refining of a low-grade molybdenite concentrate. Hydrometallurgy, 86 (1-2). pp. 56-62.

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2007) Towards sustainable solutions for fly ash through mechanical activation. Resources, Conservation and Recycling, 52 (2). pp. 157-179.

Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127.

Kumar, Vinay and Bagchi, D and Pandey, B D (2007) hydrometallurgical recovery of copper and nickel powders from the copper bleed solution of indian sea nodules. Korea on Minerals and Materials Processing and Utilization, 11 (1). pp. 56-63.

Kumar, Vinay and Kumar, Manoj and Bagchi, D and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2007) Solvent Extraction Studies for Removal of Hazardous Metals from the Sulfate Leach Solution of Electronic Wastes. Proceedings of International Symposium of resource recycling. pp. 138-143.

Maity, S K and Ballal, N B and Kawalla, R (2007) Development of process for thermo-mechanical treatment of ultrahigh strength steel prepared by electroslag refining. Ironmaking & Steelmaking, 34 (4). pp. 332-342.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (7). pp. 2417-2425.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-46. pp. 485-493.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites. Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites, 42 (20). pp. 8622-8628.

Mandal, G K and Batra, N K and Mehrotra, S P (2007) Sulphur control of blast furnace hot metal by manganese additions. Transaction of the Indian Institute of Metals, 60 (1). pp. 45-52.

Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594.

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-46. pp. 357-364.

Prakash, S and Mukherjee, K and Singh, S and Mehrotra, S P (2007) Simulation of energy dynamics of electric furnace steelmaking using DRI. Ironmaking & Steelmaking, 34 (1). pp. 61-70.

Roy, A and Sahoo, K L and Chattoraj, I (2007) Electrochemical response of AlNiLa amorphous and devitrified alloys. Corrosion Science, 49 (6). pp. 2486-2496.

Rudrakshi, G B and Srivastava, V C and Ojha, S N (2007) Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions. Materials Science and Engineering A, 457 (1-2). pp. 100-108.

Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671.

Sahoo, K L and Sahu, Rina and Mitra, A (2007) Kinetic aspects of the nanocrystallization and evolution of microhardness in Al92-XNi8LaX amorphous alloys. Materials and Manufacturing Processes, 22 (4). pp. 497-501.

Sahoo, K L and Wollgarten, M and Banhart, J (2007) Effect of solidification rate and composition on microstructure and crystallization in Al-Ni-La metallic glasses. Transaction of Indian Institute of Metals, 60 (2). pp. 349-354.

Singh, Brajendra and Manoharan, S S and Sahu, Rina and Krishnan, P S R and Shinde, A B and Jain, Karishma (2007) Low temperature neutron diffraction studies showing evidence for charge-exchange-type magnetic ordering in Mn doped SrRuO(3). Journal of Applied Physics, 101 (9).

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Srinivasan, A and Ningshen, S and Mudali, U Kamachi and Pillai, U T S and Pal, B C (2007) Influence of Si and Sb additions on the corrosion behavior of AZ91 magnesium alloy. Intermetallics, 15 (12). pp. 1511-1517.

Srinivasan, A and Pillai, U T S and Pal, B C (2007) Effect of Pb addition on ageing behavior of AZ91 magnesium alloy. Materials Science and Engineering A, 452-45. pp. 87-92.

Srivastava, V C and Mandal, R K and Ojha, S N and Venkateswarlu, K (2007) Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties. Materials Science and Engineering A, 471 (1-2). pp. 38-49.

Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753.

Vaish, A K and Gupta, R C and Mehrotra, S P (2007) Smelting reduction of iron ore - An optimum approach. Journal of Metallurgy and Materials Science, 49 (3). pp. 129-143.

Vaish, A K and Nayak, B and Mehrotra, S P and Gupta, R C (2007) The Ni-Cr-Co bearing magnetite ore of Nagaland, India - its mineralogical characteristics. Journal of Metallurgy and Materials Science, 49 (4). pp. 215-220.

Wanderka, N and Radiguet, B and Sahoo, K L and Banhart, J (2007) Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass. Materials Science Forum, 539-54. pp. 1917-1920.

Wollgarten, M and Sahoo, K L and Haug, J and Banhart, J (2007) Influence of La on the crystallisation behaviour of amorphous Al94−xNi6Lax (x=4 –7) alloys. Materials Science and Engineering A, 449-45. pp. 1049-1051.

Project Reports

Ghosh, R N and Vaish, A K and Singh, S R and Ghosh Chowdhury, S and Humane, M M and De, P K and Minj, R K and Kumar, B Ravi (2007) High Strength Formable Steels for Automobile Applications. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Kumar, Manoj and Kumar, Vinay and Singh, T B and Bagchi, D and Konar, J (2007) Production of copper powder from industrial wastes. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Kumar, Rakesh and Kumar, Sanjay and Das, Avimanyu and Mishra, T K and Cholavandan, V and Mehrotra, S P (2007) Studies on Reactivity of Classified and Mechanically activated fly Ash. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Pandey, B D and Kumar, Vinay and Mehta, K D and Abhilash, (2007) Final Project Completion Report For CORE-0020 Project (under CSIR's Tenth Five Year Plan: 2002-2007). Grant in Aid (GAP). NML, Jamshedpur. (Submitted)

Pandey, B D and Kumar, Vinay and Mehta, K D and Sahu, S K and Abhilash, (2007) Project Completion Report for the Network Project entitled Treatment/Bioremediation of Electroplating and Leather Tanning Effluents Containing Chromium COR – 008 (ILP – 013) {A Network Project of CSIR, New Delhi under Xth Five Year Plan}. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Pandey, B D and Kumar, Vinay and Sahu, S K and Mehta, K D and Agrawal, A and Bagchi, D and Maharaj, L (2007) Treatment/Bioremmediation of Electroplating and Leather Tanning Effluents Containing Chromium. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Pandey, B D and Mehta, K D and Kumar, Vinay and Singh, S and Giri, A K (2007) Biomineral Processing for Extraction of Metal Values from Ores/Concentrates/Wastes. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Prasad, Sanjay and Minj, R K and Maharaj, L (2007) Extraction of Chromium from Stainless Steel Dust. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ranganathan, S (2007) Investigations on the Reduction of Chromite Ores at Low Temperatures. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ranganathan, S and Godiwalla, K M (2007) Optimisation of Specific Power Consumption in the Prod-uction of Ferro-chromium at Rohit Ferro Tech Ltd., Bishnupur. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sahu, K K and Agrawal, A and Mishra, D and Mehrotra, S P (2007) Recovery of Molybdenum and Vanadium from spent Hydro-processing Catalyst. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Vaish, A K and Singh, S D (2007) Documentation and Development of Iron Making processes used by Tribals of India. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Conference or Workshop Item

Abhilash and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Bio-hydrometallurgical approach in processing of low grade Indian uranium ore in Column Reactor. In: Proc. BIOHYDROMET 2007, May 1-2 2007, Falmouth, U.K..

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Biosorption of trivalent chromium from a model tanning solution by adapted aspergillus niger. In: Proceedings of Mineral Biotechnology-2007, 2007.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2007) Amenability of low- grade uranium towards column bioleaching by acidithiobacillus ferrooxidans. In: International Seminars in Mineral Processing Technology (MPT 2007), 2007.

Alex, T C and Godiwalla, K M and Kumar, S and Jana, R K (2007) Extraction of silicomanganese from marine and low grade mineral resources. In: XI International Ferro Alloy Congress, Feb. 18-27, 2007, New Delhi.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2007) Stirred bead mill grinding of gibbsite:surface and morphological changes. In: The Third Asian Particle Technology Symposium Small Particle Technology, September 3-5, 2007, Beijing, China.

Chaturvedi, Hema T and Chakravarty, S and Bhattacharjee, S and Mandhyan, A K (2007) Goethite-arsenite interaction study to understand groundwater arsenic mobilization in the Bengal Delta Plain. In: Water-Rock Interaction, Proceedings, 2007, Water-Rock Interaction.

Jha, Manis K and Kumar, Vinay and Lee, Jae-chun (2007) Processing of electroplating effluent for the recovery of zinc and chromium using ion exchange technique. In: Proceedings of International Symposium of resource recycling, 2007, resource recycling.

Kumar, Rakesh and Alex, T C and Mishra, C R and Roy, S K and Mehrotra, S P (2007) Towards Sustainable Alumina Production. In: National Seminar on Environmental Concern and Remedies in Alumina Industry, January 27-28, 2007, NML, Jamshedpur.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Mehrotra, S P (2007) Novel geopolymeric building materials through synergistic utilisation of industrial waste. In: International conference alkali activated materials: research, production and utilization, 2007, Prague.

Malathi, M and Deo, Brahma and Prasad, N and Sukla, A K and Boom, Rob (2007) Theoretical and Practical Aspects of Lance Skulling and Slag Foaming in BOF Vessels. In: AISTech Conference Proceedings, May 7-10, 2007, Indiana Convention Center, Indianapolis, Ind., USA.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur.

Pal, S C and Mehta, K D and Abhilash, and Kumar, Vinay and Pandey, B D and Mankhand, T R (2007) Copper biodissolution from a low grade chalcopyrite ore by unadapted/adapted acidithiobacillus ferrooxidans. In: Proceedings of Mineral Biotechnology - 2007, 2007.

Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.

Sahu, S K and Pandey, B D and Kumar, Vinay (2007) Recovery of Cu and Ni from a Secondary Resource by Hydrometallurgical Route. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay.

Singh, T B and Alex, T C and Mishra, D and Jana, R K (2007) Dissolution Behaviour of Fe-Co Alloy in Leaching of Sea-Nodule. In: International Conference on Mineral Processing Technology (MPT – 2007), Feb. 22-24, 2007, Mumbai.

Srivastava, V C and Singh, T and Kumar, S and Ghosh Chowdhury, S and Jindal, Vikas (2007) Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite. In: International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India, February 20-23, 2007, New Delhi.

Verma, Vijay and Sahu, S K and Bagchi, D and Kumar, Vinay and Pandey, B D (2007) Solvent extraction of hexavalent chromium from electroplating waste solution with TBP. In: International Conference on Non-Ferrous Metals 2007, July 2007, Raipur.

Thesis

Ullah, Wahadat (2007) Development of ultra- fine grained aluminium by severe plastic deformation. Masters thesis, National Metallurgical Laboratory.