Items where Division is "Material Science and Technology" and Year is 1995

B

Bahadur, Aruna and Mohanty, O N (1995) Aluminum diffusion coatings on medium-carbon steel. Materials Transactions JIM, 36 (9). pp. 1170-1175.

Bahadur, Aruna and Ravi Kumar, B and Mohanty, O N (1995) Ductility improvement in iron aluminides. Journal of Materials Science, 30 (14). pp. 3690-3696.

Bhattacharya, D K (1995) Characterisation of microstructure in steels by magnetic techniques - An overview. Transactions of the indian institute of metals, 48 (6). pp. 495-513.

Bhattacharya, D K (1995) Microstructure of Welded Joints. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

Bose, A K (1995) Development of high-temperature aluminous mortar. Transactions of the indian institute of metals, 48 (2). pp. 115-119.

C

Chattopadhyay, Lalitha (1995) Size effect on plastic energy dissipation during stable crack growth. Engineering Fracture Mechanics, 51 (4). pp. 697-700.

D

Das, Samar (1995) Specimen Preparation for Electron Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Das, Goutam and Rao, Venkatesh and Joarder, A and Mohanty, O N and Murthy, S G N and Mitra, A (1995) Magnetic characterization of 5Cr-0.5Mo steel used in process 1 heater tubes. Journal of Physics D: Appl. Phys., 28 . pp. 2229-2234.

G

Ghosh, R N (1995) Basic Principles of Physical Metallurgy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Ghosh, R N and Chaudhuri, S and Roy, Nilima and Chattopadhyay, Lalitha (1995) Creep life extension of high-temperature components under wall thinning conditions. Sadhana-Academy Proceedings in Engineering Sciences, 20 ( ). pp. 331-339.

Ghosh, Sukomal (1995) Micro-Structural Characteristics of Cast Irons. In: Experimaental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

H

Halder, S and Ram, S and Ramachandrarao, P and Banerjee, H D (1995) Synthesis of high-energy-density Pr2Fe14-xCoxB, x<=3, magnets for practical applications. Bulletin of Materials Science, 18 (8). pp. 963-974.

J

Jana, R K and Singh, D D N and Roy, S K (1995) Alcohol-modified hydrochloric acid leaching of sea nodules. Hydrometallurgy, 38 (3). pp. 289-298.

Joarder, A (1995) Physical Metallurgy of Sheets. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR, Jamshedpur.

M

Mitra, A and Chen, Z J and Jiles, D C (1995) Nondestructive magnetic measurements in weld and base metals of service exposed Cr-Mo steel. NDT & E International, 28 (1). pp. 29-33.

Mitra, A and Govindaraju, M R and Jiles, D C (1995) Influence of microstructure on micromagnetic barkhausen emissions in aisi-4140 steel. IEEE Transactions on Magnetics, 31 (6). pp. 4053-4055.

Mukhopadhyay, N K (1995) Basic Principles in Physical Metallurgy - II. In: Experimantal Techniques in Industrial Metallography[ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Mukhopadhyay, N K and Weatherly, G C and Embury, J D (1995) Electron microscopy of decagonal phases in Al-Cu-Co-Si system. In: 5th International Conference on Quasicrystals, MAY 22-26, 1995, AVIGNON, FRANCE.

P

Prasad, P and Singh, R (1995) Microstructural Studies in failed Samples. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

R

Raj, Baldev and Bhattacharya, D K and Jayakumar, T (1995) Magnetic hysteresis loop parameters and Barkhausen noise for microstructural characterization of steels. Metals Materials and Processes, 7 (1). pp. 19-28.

Ram, S and Claude, E and Joubert, J C (1995) Synthesis, stability against air and moisture corrosion, and magnetic-properties of finely divided loose Nd2Fe14BHx, x-less-than-or-equal-to-5, hydride powders. IEEE Transactions on Magnetics, 31 (3). pp. 2200-2208.

Ramachandrarao, P and Dubey, K S (1995) A thermodynamic approach to the viscous behaviour of glass-forming liquids. Materials Science and Engineering B, 32 (3). pp. 285-293.

Ramachandrarao, P and Srikanth, S (1995) Estimation of the enthalpy of peritectic transformations from phase diagram data. Scripta Metallurgica et Materialia, 32 (2). pp. 161-166.

Ranganath, V R and Tarafder, S (1995) Application of fracture-mechanics for weld integrity assessment. Sadhana-academy proceedings in engineering sciences, 20 ( ). pp. 233-246.

Rao, Venkatesh and Mitra, A (1995) Phase-transformation studies on mn-al-c alloy, by dsc and electrical-resistivity measurements. Journal of Thermal Analysis, 44 (2). pp. 375-384.

Ray, Ashok K and Das, Swapan K and Roy, P K and Banerjee, S (1995) Fractography of fatigued and fractured regions in a silicon carbide whisker reinforced alumina composite. Journal of the European Ceramic Society, 15 (3). pp. 191-199.

S

Sanyal, D (1995) A boundary-element formalism for simulation of unsteady heat-transfer in welding. Transactions of the indian institute of metals, 48 (3). pp. 189-192.

Singh, S R (1995) Principles of Optical and Electron Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Sinha, A N (1995) Image Analysis & Quantitative Metallography. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sinha, A N (1995) Specimen Preparation for Optical Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Sinha, Arvind and Ramachandrarao, P (1995) On the grey penrose tiling. Philosophical Magazine Letters, 71 (3). pp. 207-212.

Sinha, Arvind and Ramachandrarao, P and Sastry, G V S (1995) Selection-rules for quasi-lattices. Current Science, 68 (6). pp. 627-631.

Sivaramakrishnan, C S (1995) Physical Metallurgy of Aluminium. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Sridhar, G (1995) Physical Metallurgy of Some Important Non-ferrous Metals and Alloys. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.