Items where Author is "Ravi Kumar, B"

Article

Michla, J R J and Ravi Kumar, B and Prabhu, T Ram and Siengchin, S and Kumar, M A and Rajini, N (2022) Effect of nitriding on mechanical and microstructural properties of Direct Metal Laser Sintered 17-4PH stainless steel. Journal of Materials Research and Technology-JMR&T, 19 . pp. 2810-2821.

Poddar, D and Ravi Kumar, B (2021) Effect of thermo-elasto-plastic strain on the mechanism of twin-free microstructure formation in the stainless steel. Materials Characterization, 171 . p. 110742.

Srivastava, A K and Patel, N K and Ravi Kumar, B and Sharma, A and Ahn, Byungmin (2020) Strength-Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation. Journal of Materials Engineering and Performance, 29 . pp. 2783-2791.

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Ravi Kumar, B (2018) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel. Materials Science and Engineering: A , 736 (IF-4.081). pp. 209-218.

Singh, M and Das, A and Venugopalan, T and Mukherjee, K and Walunj, Mahesh and Nanda, T and Ravi Kumar, B (2018) Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A(2) (IF-3.094). pp. 463-475.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Nanda, T and Ravi Kumar, B and Sharma, S and Singh, V and Pandey, O P (2017) Effect of thermal cycling process parameters on recrystallization kinetics for processing of fine-grained pure copper. Materials and Manufacturing Processes, 32(1) (IF-2.274). pp. 34-43.

Nanda, T and Ravi Kumar, B and Bhinder, J (2016) Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, 31(8) (IF 2.274). pp. 995-1003.

Singh, S and Nanda, T and Ravi Kumar, B and Singh, V (2016) Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel. Materials and Manufacturing Processes, 31(15) (IF-2.274). pp. 2064-2075.

Tammishetti, V and Rai, B and Ravi Kumar, B and Kumar, Rakesh and Pradip, (2016) Quantitative Estimation of Mineral Phases from Chemical Assays and Powder X-Ray Diffraction Rietveld Analysis: A Case Study on Selective Flocculation of Iron Ore Slimes. Transaction of the Indian Institute Metals, 69(1) (IF-0.533). pp. 125-133.

Nanda, T and Ravi Kumar, B and Singh, V (2016) A Thermal Cycling Route for Processing Nano-grains in AISI 316L Stainless Steel for Improved Tensile Deformation Behaviour. Defence Science Journal, 66(5) (IF-0.500). pp. 529-535.

Ravi Kumar, B and Sharma, S and Kashyap, B P and Prabhu, N S (2015) Ultrafine grained microstructure tailoring in austenitic stainless steel for enhanced plasticity. Materials & Design, 68 (IF-3.171). pp. 63-71.

Sahu, J K and Ravi Kumar, B and Das, S K and Paulose, N and Mannan, S L (2015) Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion. Materials Science and Engineering A, 622 (IF-2.409). pp. 131-138.

Murthy, G V S and Das, Swapan K and Ravi Kumar, B (2014) Comprehensive Microstructural Characterization of γ′ in a Nimonic Alloy Using Ultrasonic Velocity Measurements. Metallography, Microstructure, and Analysis, 3(4) . pp. 328-335.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Ravi Kumar, B and Sharma, Sailaja and Munda, Parikshit and Minz, R K (2013) Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel. Materials & Design, 50 (IF-2.913). pp. 392-398.

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Ravi Kumar, B and Sharma, S (2013) Recrystallisation Characteristics of Cold Rolled Austenitic Stainless Steel during Repeated Annealing. Recrystallization and Grain Growth V, 753 . pp. 157-162.

Prabhu, N S and Joseyphus, J and Sankara Narayanan, T S N and Ravi Kumar, B and Mitra, A and Panda, A K (2012) Residual Stress Analysis in Surface Mechanical Attrition Treated (SMAT) Iron and Steel Component Materials by Magnetic Barkhausen Emission Technique. IEEE Transactions on Magnetics, 48(12) (IF-1.363). pp. 4713-4717.

Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637.

Ravi Kumar, B and Sahu, J K and Das, Swapan K (2012) Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation. Materials Science Forum , 715-716 . pp. 334-339.

Ravi Kumar, B (2012) Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process. Materials Science Forum . pp. 627-630.

Shukla, R and Das, Swapan K and Ravi Kumar, B and Ghosh, S K and Kundu, S and Chatterjee, S (2012) An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 43 (12). pp. 4835-4845.

Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Singh, Raghuvir (2011) Influence of Processing on Texture, Grain Boundary Structure and Corrosion Behaviour of Austenitic Stainless Steels. Steel Tech, 5 (4). pp. 43-57.

Ravi Kumar, B and Sharma, Sailaja and Mahato, B (2011) Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties. Materials Science and Engineering A, 528 (6). pp. 2209-2216.

Ravi Kumar, B (2010) Influence of crystallographic textures on tensile properties of 316L austenitic stainless steel. Journal of Materials Science, 45 (10). pp. 2598-2605.

Seshu Kumar, A and Ravi Kumar, B and Datta, G L and Ranganath, V R (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering: A, 527 (4-5). pp. 954-960.

Ravi Kumar, B and Das, Swapan K and Sharma, Sailaja and Sahu, J K (2010) Effect of thermal cycles on heavily cold deformed AISI 304L austenitic stainless steel. Materials Science and Engineering: A, 527 (4-5). pp. 875-882.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2010) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Mahato, B and Sharma, S and Sahu, J K (2009) Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 40A (13). pp. 3226-3234.

Kumar, M and Srikanth, S and Ravi Kumar, B and Alex, T C and Das, Swapan K (2009) Synthesis of pure and Sr-doped LaGaO3, LaFeO3 and LaCoO3 and Sr,Mg-doped LaGaO3 for ITSOFC application using different wet chemical routes. Materials Chemistry and Physics, 113 (2-3). pp. 803-815.

Kumar, A Seshu and Ravi Kumar, B and Datta, G L and Ranganath, V R (2009) Effect of Microstructure and Grain Size on the Fracture Toughness of a Micro Alloyed Steel. Materials Science and Engineering A .

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Anumola, R and Ravi Kumar, B and Misra, R D K and Mannering, T and Panda, D and Jansto, S G (2008) On the determining role of microstructure of niobium-microalloyed steels with differences in impact toughness. Materials Science and Engineering A, 491 (1-2). pp. 55-61.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Alex, T C and Ravi Kumar, B and Das, Swapan K and Mehrotra, S P (2008) Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement. Cement and Concrete Composites, 30 (8). pp. 679-685.

Misra, R D K and Ravi Kumar, B and Somani, M and Karjalainen, L P (2008) Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Materialia, 59 (1). pp. 79-82.

Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598.

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Das, Goutam and Ravi Kumar, B and Sinha, Arvind (2008) Biomimetically synthesized polymer-hydroxyapatite sheet like nano-composite. Journal of Materials Science: Materials in Medicine, 19 (1). pp. 301-304.

Bahadur, Aruna and Mitra, A and Ravi Kumar, B and Palit Sagar, S (2007) Evaluation and Correlation of Residual Stress Measurement in Steel. Evaluation and Correlation of Residual Stress Measurement in Steel , 26 (2-4). pp. 47-55.

Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094.

Ravi Kumar, B and Mahato, B and Singh, Raghuvir (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38 (9). pp. 2085-2094.

Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Ravi Kumar, B and Ghosh Chowdhury, S and Narasaiah, N and Mahato, B and Das, Swapan K (2007) Role of Grain Boundary Character Distribution on Tensile Properties of 304L Stainless Steel. Metallurgical and Materials Transactions A, 38 (5). pp. 1136-1143.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Das, Swapan K and Mukhopadhyay, N K and Ravi Kumar, B and Bhattacharya, D K (2007) Failure analysis of a passenger car coil spring. Engineering Failure Analysis, 14 (1). pp. 158-163.

Srikanth, S and Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 (1). pp. 262-278.

Das, Swapan K and Sasikumar, C and Ravi Kumar, B (2007) Failure of evaporator tubes initiated by lamellar tearing during the commissioning of a waste heat recovery boiler. Engineering Failure Analysis, 14 . pp. 262-278.

Goswami, B and Ravi Kumar, B and Tarafder, S and Guguloth, K and Rupa, P K P and Kumar, S B and Ray, Ashok K (2007) Fatigue damage of a thermal barrier coated Ni-base superalloy. High Temperature Materials and Processes, 26 (3). pp. 209-219.

Venkataraman, R and Ravi Kumar, B and Krishnamurty, R and Das, D K (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201 (6). pp. 3087-3095.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ghosh Chowdhury, S and Das, Samar and Ravi Kumar, B and De, P K (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials, 37 A (8). pp. 2349-2359.

Ghosh Chowdhury, S and Dutta, Abhijit and Ravi Kumar, B and Kumar, Amit (2006) Textural evolution during accumulative roll bonding of an Al–Li alloy. Materials Science and Engineering A, 428 (1-2). pp. 351-357.

Humane, M M and Vaish, A K and Swaminathan, J and Ravi Kumar, B and De, P K and Peshwe, D R and Paretkar, R K (2006) Comparison of hot rolled textures in different grades of high formable steels. Steel Research International, 77 (6). pp. 445-449.

Ghosh Chowdhury, S and Srivastava, V C and Ravi Kumar, B and Soren, S (2006) Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy. Scripta Materialia, 54 (9). pp. 1691-1696.

Venkataraman, R and Parmanick, B and Ravi Kumar, B and Pathak, L C and Das, D K and Venkataraman, B (2006) The influence of substrate on partially rapidly solidified Alumina-3 wt % titania nanocrystalline coatings deposited by plasma spray technique. Surface Engineering for Manufacturing Applications , 890 . pp. 69-75.

Palit Sagar, S and Ravi Kumar, B and Dobmann, G and Bhattacharya, D K (2005) Magnetic characterization of cold rolled and aged AISI 304 stainless steel. NDT & E International, 38 (8). pp. 674-681.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Influence of strain-induced phase transformation on the surface crystallographic texture in cold-rolled-and-aged austenitic stainless steel. Metallurgical and Materials Transactions A, 36 (11). pp. 3165-3174.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Srikanth, S and Ray, Ajoy K and Bandopadhyay, A and Ravi Kumar, B and Jha, Animesh (2005) Phase constitution during sintering of red mud and red mud–fly ash mixtures. Journal of the American Ceramic Society, 88 (9). pp. 2396-2401.

Kumar, Anil and Ravi Kumar, B and Chattoraj, I and Mukherjee, S and Basumallick, A (2004) Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen. Metallurgical and Materials Transactions B, 35 (6). pp. 1123-1128.

Sasikumar, C and Rao, D S and Srikanth, S and Ravi Kumar, B and Mukhopadhyay, N K and Mehrotra, S P (2004) Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India. Hydrometallurgy, 75 (1-4). pp. 189-204.

Srikanth, S and Das, Swapan K and Ravi Kumar, B and Rao, D S and Nandakumar, K and Vijayan, P (2004) Nature of fireside deposits in a bagasse and groundnut shell fired 20 MW thermal boiler. Biomass and Bioenergy, 27 (4). pp. 375-384.

Bahadur, Aruna and Ravi Kumar, B and Kumar, A Seshu and Sarkar, G G and Rao, J S (2004) Development and comparison of residual stress measurement on welds by various methods. Materials Science and Technology, 20 (2). pp. 261-269.

Ravi Kumar, B and Singh, A K and Das, Samar and Bhattacharya, D K (2004) Cold rolling texture in AISI 304 stainless steel. Materials Science and Engineering A, 364 (1-2). pp. 132-139.

Majumdar, J Dutta and Nath, A K and Ravi Kumar, B and Manna, I (2004) Studies on residual stress developed in laser surface irradiated 0.6% carbon steel. Optics and Lasers in Engineering, 14 (3-4). pp. 133-151.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Singh, Ratnakar and Ravi Kumar, B and Kumar, A and Dey, P K and Chattoraj, I (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AlSl 304 stainless steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 34-A (11). pp. 2441-2447.

Srikanth, S and Rao, D S and Das, Swapan K and Ravi Kumar, B and Nandakumar, K and Dhanuskodi, R and Vijayan, P (2003) Combustion and deposit formation behavior on the fireside surfaces of a pulverized fuel boiler fired with a blend of coal and petroleum coke. Combustion Science and Technology, 175 (9). pp. 1625-1647.

Srikanth, S and Gopalakrishna, K and Das, Swapan K and Ravi Kumar, B (2003) Phosphate induced stress corrosion cracking in a waterwall tube from a coal fired boiler. Engineering Failure Analysis, 10 (4). pp. 491-501.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

Bahadur, Aruna and Ravi Kumar, B and Ghosh Chowdhury, S (2003) Effect of Thermomechanical Treatment on X-Ray Elastic Constants and Residual Stresses in HSLA-100 Steel. Journal of Nondestructive Evaluation, 22 (2). pp. 53-62.

Ravi Kumar, B and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of helical compression spring in coke oven batteries. Engineering Failure Analysis, 10 (2). pp. 291-296.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5−XBX (X=5, 9, 10, 11.25, 19) alloys. Journal of Magnetism and Magnetic Materials, 260 (1-2). pp. 70-77.

Srikanth, S and Ravi Kumar, B and Das, Swapan K and Gopalakrishna, K and Nandakumar, K and Vijayan, P (2003) Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler. Engineering Failure Analysis, 10 (1). pp. 59-66.

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.

Ray, Ajoy K and Venkateswarlu, K and Chaudhury, S K and Das, S K and Ravi Kumar, B and Pathak, L C (2002) Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route. Materials Science and Engineering A, 338 (1-2). pp. 160-165.

Ghosh Chowdhury, S and Das, Swapan K and Ravi Kumar, B and Kumar, S and Gottstein, G (2002) Textural development in AISI 316 stainless steel during cold rolling and annealing. Textures of Materials, 408-4 . pp. 1371-1376.

Sinha, Arvind and Agrawal, A and Das, S K and Ravi Kumar, B and Rao, Venkatesh and Ramachandrarao, P (2001) On the growth of monoclinic calcium carbonate in poly(vinyl alcohol). Journal of Materials Science Letters, 20 (17). pp. 1569-1572.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Ravi Kumar, B and Bhattacharya, D K and Das, Swapan K and Ghosh Chowdhury, S (2000) Premature fatigue failure of a spring due to quench cracks. Engineering Failure Analysis, 7 (6). pp. 377-384.

Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K and Chattoraj, I (2000) Stress corrosion cracking in an Al-bronze chlorine gas regulating valve. Engineering Failure Analysis, 7 (4). pp. 229-237.

Sinha, Arvind and Das, Swapan K and Ravi Kumar, B and Chakraborty, S and Rao, Venkatesh and Ramachandrarao, P (2000) Polymer-Mediated Synthesis of Fine-Sized Cobalt Particles. Journal of Materials Synthesis and Processing, 8 (2). pp. 109-113.

Parida, N and Ravi Kumar, B and Bhattacharya, D M (1998) Fatigue damage assessment and detection of onset of crack initiation by x-ray diffraction. Transactions of the Indian Institute of Metals, 51 (2-3). pp. 175-177.

Parida, N and Pani, B B and Ravi Kumar, B (1997) Acoustic emission assisted compaction studies on iron, iron-aluminium and iron-cast iron powders. Scripta Materialia, 37 (11). pp. 1659-1663.

Chattoraj, I and Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K (1997) Corrosive degradation and failure of vertical furnace wall tubes of a boiler. Engineering Failure Analysis, 4 (4). pp. 279-286.

Mukhopadhyay, N K and Das, Swapan K and Ravi Kumar, B and Ranganath, V R and Ghosh Chowdhury, S (1997) Premature failure of a leaf spring due to improper materials processing. Engineering Failure Analysis, 4 (3). pp. 161-170.

Parida, N and Ravi Kumar, B and Das, Goutam and Murthy, S G N and Bhattacharya, D K (1996) Monitoring the hydrotesting of a new pressure vessel by means of acoustic emission. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2423-2426.

Mitra, A and Ravi Kumar, B and Mukhopadhyay, N K and Murthy, G V S and Das, Swapan K and Bhattacharya, D K (1996) Residual stress evaluation in service exposed shot peened spring by micromagnetic and XRD techniques. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 879-882.

Bahadur, Aruna and Ravi Kumar, B and Mohanty, O N (1995) Ductility improvement in iron aluminides. Journal of Materials Science, 30 (14). pp. 3690-3696.

Ravi Kumar, B and Mohanty, O N (1992) On the correct prediction of isothermal transformation diagrams for low-carbon and low-alloy steels - comment on available data. Scripta Metallurgica Et Materialia , 26 (11). pp. 133-137.

Ravi Kumar, B and Mohanty, O N and Biswas, A (1992) Welding of thin steel plates - a new model for thermal-analysis. Journal of Materials Science, 27 (1). pp. 203-209.

Conference or Workshop Item

Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Bandyopadhyay, D and Pathak, L C and Das, S K and Ravi Kumar, B and Ramachandrarao, P (1997) In-Situ Fabrication of Ceramic Matrix Composites by RH-SHS Technique. In: Proceedings of Golden Jubilee International Conference on Recent Advances in Metallurgical Processes Vol-1, 16-19 July 1997, IIS, Bangalore.

Project Reports

Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Gujral, Amandeep and Ravi Kumar, B (2012) Deformation Induced Martensitic Transformation of 304L Austenitic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Piyush and Ravi Kumar, B (2012) Effect of Interrupted Annealing on Recrystallization of Heavily cold-rolled Austenatic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ravi Kumar, B and Murthy, G V S and Mahato, B and Metya, Avijit Kumar and Gunjan, M K and Singh, S R (2011) Non-Destructive and Destructive Investigation of MLG Parts of MIG 29 Aircraft (TMP-0165). Other (TMP). National Metallurgical Laboratory (NML), Jamshedpur. (Submitted)

Sahu, Puspendu and Singh, S R and Mahato, B and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Ghosh, R N (2007) y-y' Lattice misfit and its influence on the microstru-cture of UDIMET 520 during the rejevenation heat treatment : an X-ray diffraction study. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Swaminathan, J and Krishna, G and Gunjan, M K and Mahato, B and Ravi Kumar, B and Hansda, K L and Sharma, R K and Upadhyay, A K (2007) Failure Analysis of Water wall Tubes of Boiler No.7. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, Swapan K and Ravi Kumar, B and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Rao, Ananda and Srikanth, S and Mehrotra, S P and Ravi Kumar, B and Alex, T C and Ghosh, M and Das, Swapan K (2007) Effect of Strain on Melting Point of Lead produced by Mechanical Milling. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Ghosh Chowdhury, S and Ravi Kumar, B and De, P K and Parida, N and Ghosh, R N (2006) Crystallographic Texture determination in deformed materials by Ultrasonic Technique. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and De, P K and Lakra, B A and Ravi Kumar, B and Pramanick, A K and Das, Goutam (2006) Development of Quasi-crystal Reinforced Aluminium based Metal matrix Composites. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ravi Kumar, B and Singh, S R and Mahato, B (2006) XRD Residual Stress Analysis of Life-Expired Main Landing Gear of AN-32 Aircraft. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Rao, D S and Narasimhan, B R V and Srikanth, S and Vijayakumar, T V and Ravi Kumar, B and Mehrotra, S P (2006) Effect of Mechano-chemical activation and mineralogy of chromite on the formation and Dissolution of Cr(VI) in Aqueous Solutions. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sasikumar, C and Srikanth, S and Mukhopadhyay, N K and Rao, D S and Ravi Kumar, B and Das, Swapan K and Mehrotra, S P (2006) Enhanced Liberation and Acid Leaching Kinetics of Ilmenite through Mechno-Chemical processing. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Narasimhan, B R V and Rao, D S and Kumar, Rakesh and Alex, T C and Ravi Kumar, B and Das, Swapan K and Srikanth, S and Mehrotra, S P (2006) Mechanochemical Activation of Zircon Sands - A Low Temperature route for Liberation of Zirconia (OLP-0014). Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)