Items where Author is "De, P K"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 60.

Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press)

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Ghosh Chowdhury, S and Sahu, Puspendu and Mahato, B and De, P K (2009) Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain. Microstructure and Texture in Steels, 22 (22). pp. 361-378.

Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598.

Ghosh Chowdhury, S and Kumar, P and Das, Arpan and Das, Swapan K and Mahato, B and De, P K (2008) Evolution of grain-boundary character distribution during iterative processing of an austenitic stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 88 (6). pp. 407-414.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Rajnikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364.

Ghosh, R N and Vaish, A K and Singh, S R and Ghosh Chowdhury, S and Humane, M M and De, P K and Minj, R K and Kumar, B Ravi (2007) High Strength Formable Steels for Automobile Applications. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Panda, A K and Das, Swapan K and De, P K and Mitra, A (2007) Sintering behaviour of magnetic bulk glassy cores obtained from Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7 alloy powder. Journal of Materials Processing Technology, 184 (1-3). pp. 300-304.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, Swapan K and Ravi Kumar, B and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Jindal, Vikas and De, P K and Venkateswarlu, K (2006) Effect of Al3Sc precipitates on the work hardening behavior of aluminum–scandium alloys. Materials Letters, 60 (28). pp. 3373-3375.

Palit Sagar, S and Ghosh Chowdhury, S and Ravi Kumar, B and De, P K and Parida, N and Ghosh, R N (2006) Crystallographic Texture determination in deformed materials by Ultrasonic Technique. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and De, P K and Lakra, B A and Ravi Kumar, B and Pramanick, A K and Das, Goutam (2006) Development of Quasi-crystal Reinforced Aluminium based Metal matrix Composites. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Srivastava, V C and Das, Goutam and De, P K and Das, Swapan K and Swaminathan, J and Mandhyan, Ajay and Singh, S R (2006) Development of High Temperature conductors for Power Transmission Lines. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ghosh Chowdhury, S and Das, Samar and Ravi Kumar, B and De, P K (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials, 37 A (8). pp. 2349-2359.

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Datta, A K and Das, Goutam and De, P K and Ramachandrarao, P and Mukhopadhyay, M (2006) Finite element modeling of rolling process and optimization of process parameter. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 426 (1-2). pp. 11-20.

Humane, M M and Vaish, A K and Swaminathan, J and Ravi Kumar, B and De, P K and Peshwe, D R and Paretkar, R K (2006) Comparison of hot rolled textures in different grades of high formable steels. Steel Research International, 77 (6). pp. 445-449.

Mandhyan, Ajay and Chattoraj, I and Mishra, Suman K and De, P K (2006) Study of Hydrogen Permeation Behaviour of High Strength Aluminium Alloys. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Sastry, K K M and De, P K (2006) Analytical model for erosion behaviour of impacted fly-ash particles on coal-fired boiler components. Sadhana, 31 (5). pp. 583-595.

Ghosh, Sukomal and Kumar, A and Das, Swapan K and Das, Goutam and De, P K and Chakravarty, S (2006) Development of cast Al-Fe-V-Si alloys as a wear resistant and elevated temperature material for applications in engineering industries. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Datta, A K and Das, Goutam and De, P K (2006) Finite element modelling of steel rolling process. Journal of Metallurgy and Materials Science, 48 (3). pp. 173-180.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Datta, A K and Das, Goutam and De, P K (2006) Steel production in India and its impact in construction - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 205-214.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and De, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Sinha, I and De, P K and Srivastava, V C (2005) Mechanical working of 2124 Al alloy—SiCp cast composites. Journal of Materials Science, 40 (22). pp. 6045-6048.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Bhattamishra, A K and De, P K and Mandhyan, A and Das, S K (2005) Localised corrosion of 2124SiCp composite. Journal of Metallurgy and Materials Science, 47 (4). pp. 215-222.

Mitra, A and De, P K and Bhattacharya, D K and Srivastava, P K and Jiles, D C (2004) Ferromagnetic properties of deformation-induced martensite transformation in AISI 304 stainless steel. Metallurgical and Materials Transactions A, 35 (2). pp. 599-605.

Bhattamishra, A K and Basu, D K and De, P K and Narang, S K (2004) Corrosion behaviour of carbon steels and aluminium alloys in different media - A comparative study. Journal of Metallurgy and materials Science, 46 (1). pp. 51-59.

Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

De, P K and Paul, K K and Ghosh Chowdhury, S (2003) Development of Materials and Processing Technology for Rural Blacksmiths : A Package. In: Proceedings of the International Seminar on Downsizing Technology for Rural Development - Vol II, October 7-9, 2003, RRL Bhubaneswar.

Nachankar, A V and Vaish, A K and Humane, M M and De, P K and Moghe, D V and Pathak, S U (2003) Bake hardening mechanism in steels. Journal of Metallurgy and materials Science, 45 (4). pp. 143-160.

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.

Khatirkar, R K and Badole, R P and Vaish, A K and Humane, M M and De, P K and Paretkar, R K and Peshwe, D R and Prasad, D N (2003) Thermomechanical processing of low carbon, IF and IF high strength steels - A few typical cases. Journal of Metallurgy and materials Science, 45 (4). pp. 161-191.

Vaish, A K and Biswas, P K and Chaudhuri, S P and Humane, M M and Minj, R K and Lakra, B A and Sinhababu, S K and De, P K and Goswami, N G and Sivaramakrishnan, C S and Ramachandrarao, P (2002) Iron making in ancient India - a critical assessment. In: Traditional and innovation in the history of iron making: an Indo European perspective. PAHAR, Nainital, pp. 237-249. ISBN 81-86246-19-3

Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125.

Wasnik, D N and Samajdar, I and Kain, V and De, P K and Verlinden, B (2001) Corrosion and Grain Boundry Character Distribution(GBCD)in 316L Austenitic Stainless Steel. In: National Seminar on Corrosion and Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Das, Goutam and Das, Swapan K and Kumar, R and Das, Samar (2001) Effect of thermo-mechanical processing on the microstructure and mechanical properties of micro alloyed steels. Journal of Metallurgy and materials Science, 43 (4). pp. 221-238.

Bhattamishra, A K and Chattoraj, I and Basu, D K and De, P K (2000) Study on the influence of the Si/Fe ratio on the corrosion behaviour of some Al-Fe-Si alloys. Zeitschrift Fur Metallkunde, 91 (5). pp. 393-396.

Vaish, A K and Iyer, G V R and De, P K and Lakra, B A and Chakrabarti, A K and Ramachandrarao, P (2000) Electroslag remelting - Its status, mechanism and refining aspects in the production of quality steels. Journal of Metallurgy and materials Science, 42 (1). pp. 11-29.

Bhattamishra, A K and De, P K and Das, S K and Sivaramakrishnan, C S (2000) Environmental effect on cold pressure welded non-ferrous wires. Journal of Metallurgy and materials Science, 42 (1). pp. 47-51.

Chattoraj, I and Bhattamishra, A K and Jana, S and Das, S K and Chakraborty, S P and De, P K (1996) The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history. Corrosion Science, 38 (6). pp. 957-969.

Ghosh, B N and Lal, Kishori and De, P K and Sivaramakrishnan, C S and Ramachandrarao, P (1996) Development of ferritic stainless steel for catalytic converter. NML Technical Journal, 38 (3). pp. 117-121.

Ghose, B N and Bhattacharya, J and De, P K (1996) Enhancement of quality of steel sheet through process optimisation. NML Technical Journal, 38 (2). pp. 51-62.

Bhattacharya, J and Ghosh, B N and Chaudhury, S K and Chakraborty, S and De , P K and Mohanty, O N (1992) Structure property correlation in thermo-mechanically processed ultra high-carbon steel. Scandinavian Journal Of Metallurgy, 21 (6). pp. 279-283.

Chakraborty, S P and Choudhury, S K and De, P K and Dubey, R K (1986) Some observations on hot-forging characteristics of iron-powder preforms. NML Technical Journal, 28 (1-4). pp. 26-29.

This list was generated on Fri Mar 29 15:16:36 2024 IST.