Items where Year is 2021

Annual Reports

Director, NML (2021) Annual Report 2020-2021. CSIR-NML, Jamshedpur, Jamshedpur. ISBN 0972-4273

Article

KUMAR, ABHISHEK and AKULA, SANKARA and DEY, SHOBHANA (2021) Conservation of Resources by Processing of Waste Dumped Iron Ore Fines. December 2021, Vol. 63, No. 3-4 . pp. 55-69. (Unpublished)

Abhilash, and Agarwal, Harshita and Meshram, Pratima and Meshram, Rohit B and Jha, Soni and Patel, J N and Soni, M K and Rokkam, Kiran and Mashruwala, Sheeba (2021) Green process for recovery of vanadium from hazardous spent contact process catalyst by oxalic acid: kinetics and mechanism. Separation Science and Technology (1.75).

Abhilash, and Hedrich, Sabrina and Schippers, Axel (2021) Distribution of scandium in red mud and extraction using Gluconobacter oxydans. Hydrometallurgy, 202 (3.356).

Abhilash, and Tabassum, Shirin and Ghosh, Anirban and Meshram, Pratima and van Hullebusch, Eric (2021) Microbial Processing of Waste Shredded PCBs for Copper Extraction Cum Separation—Comparing the Efficacy of Bacterial and Fungal Leaching Kinetics and Yields. Metals, 11, 317 (2.369).

Abhilash, and Usha, Yenni and Seetharaman, K and Meshram, Pratima and Mehta, K D and Pandey, B D (2021) Application of Hydrodynamics Using CFD in Evaluating Efficacy of External Loop Air-lift Reactor Biochemical Leaching of Sea Nodules. Mineral Processing and Extractive Metallurgy Review .

Abhilash, and Vaidyanathan, Swetha and Meshram, Pratima (2021) An overview on chemical processes for synthesis of graphene from waste carbon resources. Carbon Letters (1.917).

Adekunle , Adeleke and Jamiu , Odusote and Peter , Ikubanni and Olumuyiwa , Lasode and Madhurai , Malathi and Paswan, Dayanand (2021) Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines. Int J Coal Sci Technol .

Adeleke, A A and Odusote, J K and Ikubanni, P P and Orthadahwe, T A and Lasode, O A and Ammasi, A and Kumar, K (2021) Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports (IF-3.99).

Akcil, Ata and Ibrahim, Y A and Meshram, Pratima and Panda, S and Abhilash, (2021) Hydrometallurgical recycling strategies for recovery of rare earth elements from consumer electronic scraps: a review. Journal of Chemical Technology & Biotechnology .

Akhtar, Mohammad Nishat and Khan, Muneer and Khan, Sher Afghan and Afzal, Asif and Subbiah, Ram and Ahmad, Sheikh Nazir and Husain, M M and Butt, Mohammad Mursaleen and Othman, Abdul Rahim and Bakar, Elmi Abu (2021) Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials, 14(10) . p. 2639.

Al-Negheimish, Abdulaziz and Hussain, R R and Alhozaimy, Abdulrahman (2021) Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. Construction and Building Materials, 274 . p. 121921.

Alex, T C and Mucsi, G and Venugopalan, T and Kumar, Sanjay (2021) BOF Steel Slag: Critical Assessment and Integrated Approach for Utilization. Journal of Sustainable Metallurgy .

Ammasi, A (2021) Development of synthetic slag for desulphurisation of the steel during steelmaking in induction furnace. Advances in Materials and Processing Technologies, online .

Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76).

Arif, Md and Dey, Sukanta and Gond, Arvind K and Zong, Kequing and Liu, Yongsheng and Mitra, Anirban and Mitra, Aniruddha and Sarangi, Shushanta (2021) Mesoarchean continental intraplate volcanism and sedimentation: The case of the Simlipal basin, Singhbhum Craton, eastern India. Precambrian Research, 361 (IF-4.725). p. 106245.

Bagui, S and Sahu, B P and Laha, K and Tarafder, Soumitra and Mitra, R (2021) Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 degrees C to 800 degrees C. Metallurgical and materials transactions A-physical metallurgy and materials science, 52(1) . pp. 94-107.

Banerjee, Riya and Mohanty, A and Chakravarty, S and Chakladar, S and Biswas, P (2021) A single-step process to leach out rare earth elements from coal ash using organic carboxylic acids. Hydrometallurgy, 201 .

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11.

Bansal, G K and Ghosh, C and Rajinikanth, V and Ghosh Chowdhury, S (2021) Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Low-Si Steel After Quenching and Nonisothermal Partitioning. Transactions of the Indian Institute of Metals .

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Bhuyan, P and Pradhan, S K and Mitra, R and Mandal, S (2021) Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617. Materials Characterization, 178 .

Chae, Sujin and Yoo, Kyoungkeun and Alorro, Richad Diaz and Jha, Manis K (2021) Effect of Lead and Antimony on Sulfuric Acid Leaching of Copper in Speiss from Top Submerged Lance Furnaces. Korean Journal of Metals and Materials, 59(1) . pp. 33-40.

Chakladar, S and Mohanty, Ashok and Patar, P K and Chakravarty, S and Mandal, S and Mallick, S and Jha, B C and Singh, N K and Shukla, B N (2021) Demineralization of high ash non-coking coal fines of Indian origin using Castor oil: Implications of wet milling. International Journal of Coal Preparation and Utilization, online .

Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International .

Chakraborty, J (2021) Lattice expansion and phase stability in nanocrystalline titanium thin films. Philosophical Magazine Letters, 101(8) . pp. 330-340.

Chakraborty, J and Harzer, T P and Duarte, Maria J and Dehm, G (2021) Phase decomposition in nanocrystalline Cr0.8Cu0.2 thin films. Journal of Alloys and Compounds, 888 .

Chalavadi, G and Singh, R K (2021) Feasibility study of iron ore fines beneficiation by shallow bed air fluidized separator. Particulate science and technology, 39(4) (IF-1.619). pp. 391-400.

Chandan, A K and Hung, P T and Kishore, K and Kawasaki, M and Chakraborty, J and Gubicza, Jeno (2021) On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing. Materials Characterization, 178 .

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Chandan, A K and Tripathy, S and Sen, B and Ghosh, M and Ghosh Chowdhury, S (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia, 199 (IF-5.079). p. 113891.

Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Selective extraction and separation of Li, Co and Mn from leach liquor of discarded lithium ion batteries (LIBs). Waste Management, 121 . pp. 452-457.

Choubey, Pankaj K and Kumari, Archana and Jha, Manis K and Pathak, D D (2021) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries (LIBs) of Mobile Phones. Rare Metal Technology 2021 . pp. 47-53.

Choubey, Pankaj K and Singh, Nityanand and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan and Jha, Manis K (2021) Development of Hydrometallurgical Process for Recovery of Rare Earth Metals (Nd, Pr, and Dy) from Nd-Fe-B Magnets. Metals .

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Das, A and Kumar, B and Ahmad, Sheikh Nazir and Paul, S K and Mandal, G K (2021) Formability study of bake hardening steel and its correlation with microstructure. Proceedings of the Institute of Mechanical Engineers Part B-Journal of Engineering Manufacture .

De, Amit Kumar and Dey, Shobhana (2021) Establishment of transition point in operating mode for Constant Current Constant Voltage (CC-CV) charging of Li-ion batteries. World Journal of Advanced Engineering Technology and Sciences, 3(1) . pp. 72-84.

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance .

Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press)

Dutta, Chandan and Kumar, J and Das, T K and Sagar, S P (2021) Recent Advancements in the Development of Sensors for the Structural Health Monitoring (SHM) at High-Temperature Environment: A Review. IEEE Sensors Journal, 21(14) . pp. 15904-15916.

Dwivedi, Awadesh and Kumari, Arya and Aarthy, Murali and Singh, S K and Ojha, Monalisha and Jha, Suman and Jha, S K and Jha, N S (2021) Spectroscopic and molecular docking studies for the binding and interaction aspects of curcumin-cysteine conjugate and rosmarinic acid with human telomeric G-quadruplex DNA. International Journal of Biological Macromolecules, 182 . pp. 1463-1472.

Ghosh, A and Das, T K and Sharma, A K and Mukherjee, R and Bhushan, A and Sagar, S P (2021) Microwave-assisted infrared thermography: A tool for quality assessment of blast furnace feeds. Infrared Physics & Technology, 114 .

Guguloth, K and Fernando, D.C and Paulose, N and Sahu, J K (2021) Evolution of microstructure during tensile creep deformation of nickel-based disk superalloy. International Journal of Pressure Vessels and Piping, 194 Part A .

Husain, M M and Meena, L K and Ghosh, M and Prabhu, N (2021) Corrosion at the Weld Nugget of the Friction-Stir-Welded Medium Strength Steel: Effect of Microstructure. Metallurgical and Materials Transactions A .

Jena, P S M and Pradhan, S K and Tripathy, S and Mahato, B and Fernando, C and Paulose, N and Sahu, J K (2021) Evolution of geometrically necessary dislocation at the gamma-gamma ' interface and its effect on tensile deformation behaviour of disk super alloy. Materials Science & Engineering A-Structural materials properties microstructure & processing, 807 .

Jha, Manis K and Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Park, Ilhwan (2021) Recovery of Rare Earth Metals (REMs) from Nickel Metal Hydride Batteries of Electric Vehicles. Minerals .

Kadgaye, Chetan and Hasan, Sk Md and Patra, Sudipta and Ghosh, M and Nath, S K and Karmakar, Anish (2021) Role of Cerium on Transformation Kinetics and Mechanical Properties of Low Carbon Steels. Metallurgical and Materials Transactions A, Online . pp. 1-18.

Kamaraj, A and Tripathy, S and Chalavadi, G and Sahoo, P P and Misra, Siddhartha (2021) Characterization and Assessment of Mold Flux for Continuous Casting of Liquid Steel Using an Inverse Mold Simulator. Steel Resarch International, online . p. 2100121.

Kamaraj, Ashok and Meshram, Rohit B (2021) A comparative study on environmental impact analysis of synthetic and ESR flux used for refining of steel. 28th CIRP Conference on Life Cycle Engineering .

Kar, J and Guguloth, K (2021) Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel. Metals and Materials International .

Karar, D and Chatterjee, S and Pramanick, A K and Bandyopadhyay, N R and Ray, Mallar (2021) Electrical transport through pelletized tablet of silicene like quasi 2D crystalline silicon. Materials Letters, 303 .

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161 .

Khajuria, A and Akhtar, M and Bedi, R (2021) A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. Journal of Strain Analysis for Engineering Design .

Kishore, Kaushal and Kumar, R Gaurav and Chandan, A K (2021) Critical assessment of the strain-rate dependent work hardening behaviour of AISI 304 stainless steel. Materials Science and Engineering A, 803 . p. 140675.

Kumar, C and Jena, P S M and Singh, R K and Harmain, G A and Sahu, J K (2021) Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H. International Journal of Pressure Vessels and Piping, 194 Part B .

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A .

Kumar, Suranjit and Kale, Rahul P and Singh, Pawan K and Ghosh, M and Chattopadhyay, J (2021) Fracture toughness behavior of dissimilar metal (SA508 Gr.3 Class 1 and SA312 Type 304LN) weld joint: With and without stress relieving treatment. Fatigue & Fracture of Engineering Materials and Structures, online .

Kumar, U and Das Chakraborty, S and Sahu, Ranjan K and Bhattacharya, P and Mishra, T (2021) Improved Interfacial Charge Transfer on Noble Metal-Free Biomimetic CdS-Based Tertiary Heterostructure @ 2D MoS2-CdS-Cu2O with Enhanced Photocatalytic Water Splitting. Advanced Materials Interfaces .

Kumari, A and Tripathy, A and Mandre, N R (2021) Artificial neural network-based sensitivity analysis and experimental investigation of liquid-solid fluidization technique for low-grade coal upgradation. Journal of Dispersion Science and Technology .

Kumari, A and Tripathy, A and Mandre, N R (2021) Multi-response and Misplacement Optimization of Upgrading BMQ Ore in Liquid-Solid Fluidized Bed Separator Using Taguchi-based Grey Relational Analysis. Journal of Sustainable Metallurgy, 7(3) . pp. 1200-1223.

Kumari, A and Tripathy, A and Rayasam, V (2021) Performance characterization and misplacement studies of liquid-solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science and Technology, 39(4) . pp. 436-448.

Kumari, Aarti and Dipali, Jha and Randhawa, N S and Sahu, S K (2021) Electrochemical treatment of spent NdFeB magnet in organic acid for recovery of rare earths and other metal values. Journal of Cleaner Production, 309 (7.246).

Kumari, Aarti and Raj, R and Randhawa, N S and Sahu, S K (2021) Energy efficient process for recovery of rare earths from spent NdFeB magnet by chlorination roasting and water leaching. Hydrometallurgy, 201 .

Kumari, Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2021) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. Rare Metal Technology 2021 . pp. 91-100.

Kumari, Beena and Sahney, Sangeeta and Madhukar, Anuradha (2021) Aligning Individual and Organizational R&D Goals for Self-Sustainability: Investigating Preferences of Researchers in Selected CSIR-Laboratories, India. International Journal of Productivity and Performance Management .

Kundu, Rajen and De, Suranjan (2021) Characterization and analysis of the triglyceride transesterification process. Biomass Conversion and Biorefinery (4.987).

Kundu, Rajen and Payal, Priyanka (2021) Biodegradation Study of Potato Starch-Based Bioplastic. Current Chinese Chemistry, 2(2) . e190421192895.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari, Archana and Kim, T G (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metals Technology . pp. 197-209.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari, Archana and Kim, Tai Gyun (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metal Technology 2021 . pp. 197-209.

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari , Archana and Kim, Tai Gyun (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metal Technology 2021 .

Mahato, P and Banerjee, P and Murmu, Manilal and Hirani, Harish and Murmu, N C and Mishra, Suman K (2021) Investigation on Multifunctional Properties of Sputtered Ti-Si-B-C Coating with Varied Thickness over Targeted Surface. Journal of Materials Engineering and performance .

Meshram, R B and Kumar, Sanjay (2021) Comparative life cycle assessment (LCA) of geopolymer cement manufacturing with Portland cement in Indian context. International Journal of Environmental Science and Technology .

Mishra, A and Dubey, Paritosh and Chandra, R and Srivastava, S K (2021) Observation of large exchange bias field in Mn rich NiMnAl Heusler alloy thin film. Journal of Magnetism and Magnetic Materials, 532 .

Mishra, G and Chandan, A K (2021) Effect of cold deformation extent and ART annealing duration on the microstructure and mechanical properties of a medium manganese steel. Materials Chemistry and Physics, 271 .

Mohana Rao, Andavarapu and A, Vidyadhar and Ranjit, Prasad (2021) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization . pp. 1-19.

Mohanty, Ashok and Kumar, S and Tiwari, S K (2021) Assessment of N-(4H-1,2,4-triazol-4-yl)octanamide as hydrochloric acid corrosion inhibitor for mild steel. Materials Today Communications, 27 .

Murugaiyan, Premkumar and Mitra, A and Jena, S M and Mahato, B and Ghosh, M and Roy, Rajat K and Panda, A K (2021) Grain refinement in Fe-rich FeSiB(P)NbCu nanocomposite alloys through P compositional modulation. Materials Letters, 295 (IF-3.204). p. 129852.

Nair, Aswathy S and Vasumathi, N and Jayasankar, K and Sreejakumari, S S (2021) Scalable preparation of graphene from graphite ore via mechano-chemical ball milling. Materials and Manufacturing Processes .

Nanda, T and Singh, V and Singh, G and Singh, M and Kumar, B R (2021) Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications. Archives of civil and mechanical engineering, 21(1) .

PAL, Jagannath and Prasad, D and T, Venugopalan (2021) MODIFIED COKE BREEZE DISTRIBUTION IN IRON ORE SINTERING - A NOVEL TECHNIQUE OF REDUCING ENERGY CONSUMPTION AND IMPROVING QUALITY. J. Min. Metall. Sect. B-Metall, . 57 (1) (2.4). pp. 73-82.

Pal, Jagannath and D, Prasad and T, Venugopalan (2021) Modified coke breeze distribution in Iron ore sintering - A Novel technique of reducing energy consumption and improving quality. Journal of Mining and Metallurgy, Section B: Metallurgy, 57(1) (IF-1.6). pp. 73-82.

Pal, Jagannath and Rajshekar, Y and Kumar, Sanjay and Venugopalan, T (2021) Development of carbon composite iron ore slime briquettes for using in ironmaking. Journal of Metallurgy and Materials Science, Vol. 63, No. 1-2, January-June 2021 . pp. 1-11.

Panda, Rekha and Dinkar, Om Shankar and Kumari, Archana and Gupta, Rajesh and Jha, Manis K and Pathak, D D (2021) Hydrometallurgical processing of waste integrated circuits (ICs) to recover Ag and generate mix concentrate of Au, Pd and Pt. Journal of Industrial and Engineering Chemistry, 93 (IF-5.278). pp. 315-321.

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Metal Technology 2021 . pp. 115-126.

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, Devendra Deo (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Earth Technology . pp. 115-126.

Park, Ilhwan and Kanazawa, Yuki and Sato, Naoya and Galtchandmani, Purevdelger and Jha, Manis K and Tabelin, Carlito Baltazar and Jeon, Sanghee and Ito, Mayumi and Hiroyoshi, Naoki (2021) Beneficiation of Low-Grade Rare Earth Ore from Khalzan Buregtei Deposit (Mongolia) by Magnetic Separation. Minerals .

Park, Yujin and Eom, Yuik and Yoo, Kyoungkeun and Jha, Manis K (2021) Leaching of Copper from Waste-Printed Circuit Boards (PCBs) in Sulfate Medium Using Cupric Ion and Oxygen. Metals, 11(9) .

Pereira, A R M and Hacha, R R and Torem, M L and Merma, A G and Silvas, F P C and Abhilash, (2021) Direct hematite flotation from an iron ore tailing using an innovative biosurfactant. Separation Science and Technology .

Poddar, D and Ravi Kumar, B (2021) Effect of thermo-elasto-plastic strain on the mechanism of twin-free microstructure formation in the stainless steel. Materials Characterization, 171 . p. 110742.

Pradhan, S K and Bhuyan, P and Bairi, L R and Mandal, S (2021) Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel. Corrosion Science, 180 . p. 109187.

Prasad, Sanjay and Kumar, Manoj and Randhawa, N S (2021) Processing of Chromite Overburden by Soda Roasting to Recover Chromium as Sodium Chromate. Transactions of the Indian Institute of Metals, online .

Rai, R K and Sahu, J K and Paulose, N and Fernando, D.C (2021) Tensile deformation micro-mechanisms of a polycrystalline nickel base superalloy: From jerky flow to softening. Materials Science and Engineering A, 807 .

Rajnikanth, V and Soni, M K and Mahato, B and Rao, M Ananda (2021) Microstructural investigation of rolling contact fatigue (RCF) on a failed planetary gear of a windmill gearbox. Engineering Failure Analysis, 121 .

Rajpurohit, R S and Jena, P S M and Kumar, Shivam and Sahu, J K (2021) Asymmetric cyclic loading behavior of micro-alloyed 2.25 Cr–Mo steel at room temperature. International Journal of Pressure Vessels and Piping, 191 (IF-2.230). p. 104369.

Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurries of Indian coals using carboxymethylcellulose as dispersant- a comparative study. International Journal of Coal Preparation and Utilization, 41(10) . pp. 728-738.

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurry using sodium tripolyphosphate as a dispersant. International Journal of Coal Preparation and Utilization, 41(6) . pp. 385-397.

Saha, S and Ghosh, M and Pramanick, A K and Mondal, C and Maity, J (2021) Attainment of high specific hardness and specific modulus in spark plasma sintered aluminium-copper-silicon carbide-titanium carbide hybrid compositeHohe spezifische Harte und spezifisches Schubmodul von einem sparkplasmagesinterten Aluminium-Kupfer-Siliziumkarbid-Titankarbid-Verbundwerkstoff. Materialwissenschaft und Werkstofftechnik, 52(9) . pp. 965-981.

Saha, S and Ghosh , M and Pramanick, A K and Mondal, C and Maity, J (2021) Microstructure and Mechanical Properties of Al/Cu-p/SiCp/TiCp-Based Hybrid Composites Fabricated by Spark Plasma Sintering. Journal of materials engineering and performance .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Sahoo, Biraj K and Srivastava, V C and Mahato, B and Ghosh Chowdhury, S (2021) Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing. Materials Science and Engineering A, 799 (IF-). p. 140100.

Sahoo, M and Dey, Shobhana (2021) A comparative study on the characterisation and combustion behaviour of high ash coals from two different geographical origins. Fuel, 286(2) (IF-5.578).

Sahoo, T and Thakur, D and Panda, A B and Ghosh, S C (2021) Copper/manganese oxide catalyzed regioselective amination of quinoline N-oxides: An example of synergistic cooperative catalysis. Tetrahedron Letters, 83 .

Sahu, L and Bhattacharya, S and Dey, Shobhana (2021) Effect of reagents on flotation kinetics of differently sized feeds. International Journal of Coal Preparation and Utilization .

Sahu, M K and Palit Sagar, S (2021) Nonlinearity in the propagation of acoustic waves: Simulation and experimental validation in a creep damaged material. Materials Today, 44, Part 1 . pp. 2251-2256.

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.

Sarkar, A N and Singha, K and Panda, Asit Baran and Pal, Sagar (2021) In-situ deposited CdS NPs on pH induced fully exfoliated layered titanate-biopolymeric composite and its photocatalytic activity. Polymer, 225 (IF-4.). p. 123791.

Selvi, G T and Jha, S K (2021) Discharge Profile and Its Correlation with Estimated Parametric Sensitivity and Electrical Contact Resistance Losses in Li-Ion Battery. Journal of The Electrochemical Society (JES), 168(11) .

Sen, Mainak and Suman, Swati and Mukherjee, Shreya and Banerjee, Trideep and Sivaprasad, S and Tarafder, S and Bhattacharjee, Amit and Kar, Sujoy (2021) Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy. International Journal of Fatigue, 148 (IF-4.369 ). p. 106238.

Seshu Kumar, A and Khadeer, S A and Rajinikanth, V and Pahari, Santanu and Kumar, B Ravi (2021) Evaluation of bond interface characteristics of rotary friction welded carbon steel to low alloy steel pipe joints. Materials Science and Engineering A, 824 .

Sharma, Mamta and Bhowmik, Tishrota and Mishra, V (2021) Significance of washability on heat-altered coal from Jharia and Raniganj Coalfields, India. International Journal of Oil, Gas and Coal Technology, 27(2) . pp. 169-185.

Shikuku, V O and Mishra, T (2021) Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isotherms. Applied Water Science, 11(6) .

Siddique, A B and Hossain, S M and Pramanick, A K and Ray, M (2021) Excitation dependence and independence of photoluminescence in carbon dots and graphene quantum dots: insights into the mechanism of emission. Nanoscale, 13(39) .

Siddique, A B and Morrison, K and Venkata, G and Pramanick, A K and Banerjee, N and Ray, M (2021) Charge Transport through Functionalized Graphene Quantum Dots Embedded in a Polyaniline Matrix. ACS Applied Electronic Materials, 3(3) . pp. 1437-1446.

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Singh, J K and Paswan, S and Saha, D and Pandya, Achal and Singh, D D N (2021) Role of air pollutant for deterioration of Taj Mahal by identifying corrosion products on surface of metals. International journal of environmental science and technology .

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190 .

Singh, Rahul and Yadav, Surya Deo and Sahoo, Biraj K and Ghosh Chowdhury, S and Kumar , Abhishek (2021) Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures. Defence Science Journal, 71(3) . pp. 383-389.

Srivastava, A and Kamaraj, A and Mandal, K and Mandal, G K (2021) Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel. Metals and materials international .

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Tome, Sylvain and Bewa, C N and Nana, Achile and Nemaleu, J G D and Etoh, Marie-Annie and Tchakoute, H K and Kumar, Sanjay and Etame, Jacques (2021) Structural and Physico-mechanical Investigations of Mine Tailing-Calcined Kaolinite Based Phosphate Geopolymer Binder. Silicon .

Tome, Sylvain and Nana, A and Kaze, C R and Djobo, J N Y and Alomyri, T and Kamseu, E and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2021) Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Add and Artificial Seawater. Silicon .

Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) .

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Yadav, Anshul and Sharma, Prerana and Panda, Asit Baran and Shahi, Vinod K (2021) Photocatalytic TiO2 incorporated PVDF-co-HFP UV-cleaning mixed matrix membranes for effective removal of dyes from synthetic wastewater system via membrane distillation. Journal of Environmental Chemical Engineering, 9(5) (IF-5.909). p. 105904.

Yadav, Anshul and Singh, K and Panda, Asit Baran and Labhasetwar, P K and Shahi, Vinod K (2021) Membrane distillation crystallization for simultaneous recovery of water and salt from tannery industry wastewater using TiO2 modified poly (vinylidene fluoride-co-hexafluoropropylene) nanocomposite membranes. Journal of Water Process Engineering, 44 .

Book or NML Publication

Agarwal, Sanjay and Dubey, Vishal kumar and Park, K H and Lee, Jin-Young (2021) Distribution of Rare Earth Elements in Coal and Coal Fly Ash. In: Clean Coal Technologies Beneficiation, Utilization, Transport Phenomena and Prospective. Springer Nature , Switzerland AG , pp. 557-574. ISBN 978-3-030-68501-0

Bhattacharyya, P (2021) Conducting-Polymer-Based Supercapacitors. In: Handbook of Nanocomposite Supercapacitor Materials III. Springer Fachmedien Wiesbaden GmbH, Germany. ISBN ISBN: 978-3-030-68363-4

Conference or Workshop Item

Kumari, Ajita and Vasumathi, N and Abhishek, P and Vijaya Kumar, T V (2021) Exploratory studies on beneficiation of low-grade Banded Iron ore Formations (BIF) of Karnataka, India. In: Asia Steel 2021, December 5-9, 2021, Korea. (Submitted)

Sai Kumar, M and Rashid Sulthan, K and Vasumathi, N and Kumari, Ajita and Vijaya Kumar, T V (2021) Flotation of low-grade graphite ore using collector derived from low density polyethylene waste. In: CHEMCON 2021, DECEMBER 27-30, 2021, BHUBANESWAR. ODISHA, INDIA. (Submitted)

Vasumathi, N and Chennakesavulu, K and Cassandra Austenb, I and Sai Kumara, M and Vijaya Kumar, T V and Kumari, Ajita (2021) STUDY ON FLOTATION OF SILLIMANITE USING PLANT-BASED COLLECTOR. In: CHEMCON-2021, DECEMBER 27-30, 2021, BHUBANESWAR, ODISHA, INDIA. (Submitted)

Vasumathi, N and Sai Kumar, M and Abhishek, D S V and Vijaya Kumar, T V and Gopalkrishna, S J (2021) A comparative study on flotation of coal using eco-friendly single reagent and conventional dual-reagent system. In: CHEMCON 2021, DECEMBER 27-30, 2021, BHUBANESWAR, ODISHA, INDIA. (Submitted)

Thesis

Yadav, Abhishek (2021) Synthesis of nano crystalline nickel by severe plastic deformation. Masters thesis, CSIR-National Laboratory Jamshedpur, Jharkhand .