Number of items: 19.
Baral, Jayashree (2011) Creep characterization of Boron added P91 steel in the temperature range 600 - 650 degree C. Mtech thesis, National Metallurgical Laboratory (NML).
Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.
Chaudhary, P N (1999) Dephosphorization of high carbon ferromanganese using BaCO3 based fluxes. PhD thesis, Indian Institute of Technology.
Chaudhuri, S (1993) Some aspects of creep behaviour of 2.25 Cr-1Mo Steel. PhD thesis, IIT Kharagpur.
Das, Anindya (2011) High Strain Rate Tensile Deformation of Low Carbon Steels (OLP-0160). Mtech thesis, National Metallurgical Laboratory (NML).
Das, Swapan K (2007) Fracture Behaviour of Copper Strengthened HSLA Steel. PhD thesis, Bengal Engineering and Science University.
Himadri, Roy (2011) Monotonic and cyclic fracture behaviour of AISI 304LN stainless steel. PhD thesis, Indian Institute of Technology, Kharagpur.
Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .
Kumar, M (2010) Synthesis, characterization and phase equilibrium of perovskite oxides and development of intermediate temperature solid oxide fuel cells. PhD thesis, University of Madras.
Maity, Sujata (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.
Narasaiah, N (2004) Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels. PhD thesis, IIT Kharagpur.
Prasad, Prabha (2002) Effect of Monotonic and Cyclic Loading on the Fracture Behavior of SA 333 Steel. PhD thesis, Indian Institute of Technology Kharagpur.
Sahu, J K (2008) Effect of 475oC embrittlement on the fatigue behaviour of a duplex stainless steel. PhD thesis, University Siegen.
Sasikumar, C (2009) The effect of mechanical activation on energetics and dissolution kinetics of Indian beach sand ilmenite. PhD thesis, IT, Banaras Hindu University Varanasi.
Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Mtech thesis, Indian Institute of Technology Madras, Chennai.
Soupramanien, C (2011) Mixed-mode fatigue crack growth in TPB specimen under moving mass. Mtech thesis, National Metallurgical Laboratory (NML).
Tarafder, Mita (2008) Fractal Analysis of Microstructural and Fractograpghic Images for Evaluation of Materials. PhD thesis, Jadavpur University.
To Duy, Ca (1999) Influence of Rare Earth Metals on the Nucleation and Precipitation of Slag Inclusions during Solidification of Molten Steel. PhD thesis, National Metallurgical Laboratory (NML).
Ullah, Wahadat (2007) Development of ultra- fine grained aluminium by severe plastic deformation. Mtech thesis, National Metallurgical Laboratory.
This list was generated on Sun May 27 04:07:08 2012 IST.
