Items where Subject is "Materials Science > Phase Transformation"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | K | M | R | S
Number of items at this level: 13.

A

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

K

Kumar, Rakesh and Srikanth, S and Mehrotra, S P (2011) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur.

M

Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, Bengal Engineering and Science University, Shibpur, Howrah.

R

Ranganathan, S (2000) Prediction of phase equilibria by the technique of successive partial equilibration - The general algorithm. Calphad, 24 (3). pp. 285-294.

Ravi Kumar, B (2007) Influence of Cold Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. METALLURGICAL AND MATERIALS TRANSACTIONS A, 38A (9). pp. 2085-2094.

Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637.

Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99.

S

Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Analytical electron microscopy of spray formed and hot extruded Al-18%Si–5%Fe-1.5%Cu alloy. In: International conference on Spray Forming, September 04-06, 2006, Bremen, Germany.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2006) Deformation Behavior of Spray Deposited 2014 Al-SiCP Composites. In: 6th international conference on spray forming, September 04-06, 2006, Bremen, Germany.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20. pp. 839-848.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of the Single Phase i-AlCuFe Bulk Quasicrystal by Spray Forming. In: Tenth international conference on Quasicrystals (ICQ10), July 7-11, 2008, Zurich, Switzerland.

This list was generated on Wed Feb 22 04:36:16 2017 IST.