Items where Subject is "Materials Science > Biomaterials"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | J | P | R | S | V
Number of items at this level: 31.

A

Abhilash, and Beena, Kumari (2011) Technology Transfer-A Case Study at NML. In: Technology Valorisatioin and Management at ASCI, 30Jan-12Feb2011, Hyderabad.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

B

Bhaskar Raju, G and Ratchambhigai, S and Rao, Ananda and Vasumathi, N and Vijaya Kumar, T V and Prabhakar, S and Subba Rao, S (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the indian institute of metals, 69(1) (IF-0.62). pp. 75-81.

C

Chandrasekhar, K and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML .

D

Dutta, Abinash (2011) Biomimetic synthesis and characterization of calcium silicate and hydroxyapatite nanoparticles from natural sources (Rice husk ash and Mollusc shell). Masters thesis, CSIR-National Metallurgical Laboratory.

G

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Gupta, Siddhi and Goswami, Sudipta and Sinha, Arvind (2012) A combined effect of freeze--thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomedical Materials, 7 (1). 015006-1.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2011) Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Journal of Materials Science:Materials in Medicine, 22 (7). pp. 1763-1774.

H

Hoff, Dan and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2013) Comparison study of ferrofluid and powder iron oxide nanoparticle permeability across the blood-brain barrier. International Journal of Nanomedicine, 8(1) (IF-3.463). pp. 703-710.

J

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

P

Panigrahi, Suchismita (2011) Synthesis Of Inorganic Particles From Natural Source And Their Characteristics. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted)

R

Ramachandrarao, P (1997) Biomimetics: a route for the synthesis of novel materials. In: Multi-facets of metallurgy: emerging trends. The Indian Institute of Metals, Jamshedpur, pp. 261-274.

Reddy, Sujatha and Amarnath, Miriyala and Sinha, Arvind and Singh, Shashi (2011) NanoBiphasic Ceramics For Tissue Engineering: A Review. Journal of Bionanoscience, 5 (1). pp. 26-32.

S

Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Sheikh, Lubna and Vohra, R and Verma, A K and Nayar, S (2015) Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties. Materials Sciences and Applications, 6 . pp. 242-250.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

V

Vassilev, T S and Ivanova, G and Dragieva, I and Pramanick, A K and Sinha, Arvind (2011) Thermal behavior of ferromagnetic bio-compatible nanoparticles: A comparative DSC study. In: Nanoscience & Nanotechnology. Bulgarian Academy of Sciences, Sofia, pp. 225-229. ISBN ISBN 1313-8995

This list was generated on Sat Dec 16 18:18:59 2017 IST.