Items where Subject is "Materials Science > Biomaterials"

Article

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Adeleke, A A and Odusote, J K and Ikubanni, P P and Orthadahwe, T A and Lasode, O A and Ammasi, A and Kumar, K (2021) Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports (IF-3.99).

Adeleke, A A and Odusote, J K and Paswan, Dayanand and Lasode, O A and Malathi, M (2019) Influence of Torrefaction on Lignocellulosic Woody Biomass of Nigerian Origin. Journal of Chemical Technology and Metallurgy, 54(2) . pp. 274-285.

Arora, P and Tewary, S and Krishnamurthi, S and Kumari, Neelam (2023) An experimental setup and segmentation method for CFU counting on an agar plate for the assessment of drinking water. Journal of Microbiological Methods, 214 .

Bhaskar Raju, G and Ratchambhigai, S and Rao, Ananda and Vasumathi, N and Vijaya Kumar, T V and Prabhakar, S and Subba Rao, S (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the indian institute of metals, 69(1) (IF-0.62). pp. 75-81.

Chandrasekhar, K and Subramanian, S and Modak, J M and Natarajan, K A (1998) Removal of metal ions using an industrial biomass with reference to environmental control. International Journal of Mineral Processing, 53 (1-2). pp. 107-120.

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Gupta, Siddhi and Goswami, Sudipta and Sinha, Arvind (2012) A combined effect of freeze--thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomedical Materials, 7 (1). 015006-1.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2011) Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Journal of Materials Science:Materials in Medicine, 22 (7). pp. 1763-1774.

Hoff, Dan and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2013) Comparison study of ferrofluid and powder iron oxide nanoparticle permeability across the blood-brain barrier. International Journal of Nanomedicine, 8(1) (IF-3.463). pp. 703-710.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

Jha, Gaurav and Soren, S and Mehta, K D (2023) Assessment of the internal chemistry nexus of coke and biomass-based sinters. Sadhana-Academy Proceedings in Engineering Sciences, 48(4) .

Kailath, A J and Sinha, Arvind (2020) Mg-based biodegradable alloys for orthopedic implants - A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 59-70.

Kundu, B and Balla, V K and Muraleedharan, K (2020) Technology glimpse of bioceramic implants developed by CSIR-CGCRI, Kolkata. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 49-57.

Mani, M and Mariyaselvakumar, M and Tothadi, S and Panda, Asit Baran and Srinivasan, K and Konwar, L J (2024) Base free HMF oxidation over Ru-MnO2 catalysts revisited: Evidence of Mn leaching to Mn-FDCA complexation and its implications on catalyst performance. Molecular Catalysis .

Perumal, G and Chakrabarti, A and Pati, S and Singh, S and Reddy, V and Grewal, H S and Manivasagam, G and Arora, H S (2020) Limiting platelet adhesion in stainless steel bio-implants through microstructural modification. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 41-48.

Reddy, Sujatha and Amarnath, Miriyala and Sinha, Arvind and Singh, Shashi (2011) NanoBiphasic Ceramics For Tissue Engineering: A Review. Journal of Bionanoscience, 5 (1). pp. 26-32.

Sarkar, C and RayChowdhuri, Angshuman and Kumar, Amit and Laha, Dipranjan and Garai, Subhadra and Chakraborty, Jui and Sahu, Sumant Kumar (2018) One pot synthesis of carbon dots decorated carboxymethyl cellulose- hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing. Carbohydrate Polymers, 181 (IF- 4.81). pp. 710-718.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Sheikh, Lubna and Vohra, R and Verma, A K and Nayar, S (2015) Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties. Materials Sciences and Applications, 6 . pp. 242-250.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Singla, Rashmi and Kumar, Sanjay and Alex, T C (2019) Reactivity Alteration of Granulated Blast Furnace Slag by Mechanical Activation for High Volume Usage in Portland Slag Cement. Waste and Biomass Valorization . pp. 1-11.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Book or NML Publication

Ramachandrarao, P (1997) Biomimetics: a route for the synthesis of novel materials. In: Multi-facets of metallurgy: emerging trends. The Indian Institute of Metals, Jamshedpur, pp. 261-274.

Vassilev, T S and Ivanova, G and Dragieva, I and Pramanick, A K and Sinha, Arvind (2011) Thermal behavior of ferromagnetic bio-compatible nanoparticles: A comparative DSC study. In: Nanoscience & Nanotechnology. Bulgarian Academy of Sciences, Sofia, pp. 225-229. ISBN ISBN 1313-8995

Conference or Workshop Item

Abhilash, and Beena, Kumari (2011) Technology Transfer-A Case Study at NML. In: Technology Valorisatioin and Management at ASCI, 30Jan-12Feb2011, Hyderabad.

Project Reports

Mishra, Navya and Sinha, Arvind and Nayar, S (2011) Synthesis of ferrofluids with collagen as a template-Biomolecular matrix mediated synthesis of ferrofluids. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

Pramanick, A K (2018) High Entropy Zr-Ca-Si-Ti-Fe based Alloy for Biomaterial Application. Exploratory (OLP). http://www.nmlindia.org, http://www.nmlindia.org. (Unpublished)

Pramanick, A K and Sinha, Arvind and Nayar, S and Das, Goutam and Mitra, A (2013) Biomimetic Hydroxyapatite Coating on Zirconium Based Biocompatible Alloys. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Thesis

Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML .

Dutta, Abinash (2011) Biomimetic synthesis and characterization of calcium silicate and hydroxyapatite nanoparticles from natural sources (Rice husk ash and Mollusc shell). Masters thesis, CSIR-National Metallurgical Laboratory.

Panigrahi, Suchismita (2011) Synthesis Of Inorganic Particles From Natural Source And Their Characteristics. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML).