Items where Subject is "Materials Science > Coatings"

Article

Ananda Kumar, S and Shree Meenakshi, K and Sankara Narayanan, T S N and Srikanth, S (2008) Corrosion resistant behaviour of PANI–metal bilayer coatings. Progress in Organic Coatings, 62 (3). pp. 285-292.

Anantapadmanabahn, S S and Mishra, G and Parida, S (2020) A brief review on the development of self-healing, hydrophobic and antifouling epoxy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 1-11.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2012) Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling. Journal of coatings technology and research, 9 (1). pp. 39-46.

Aruna, S T and Latha, S and Lakshmi, R V (2020) Multifunctional properties of electrodeposited nickel composite coating containing nanosized monoclinic zirconia particles. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 63-74.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.

Baskaran, Irusen and Sakthi Kumar, R and Sankara Narayanan, T S N and Stephen, A (2006) Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties. Surface and Coatings Technology, 200 (24). pp. 6888-6894.

Baskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2009) Corrosion resistance of electroless Ni–low B coatings. Transactions of the Institute of Metal Finishing, 87 (4). pp. 221-224.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni–P deposits. Materials Chemistry and Physics, 99 (1). pp. 117-126.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties. Materials Letters, 60 (16). pp. 1990-1995.

Gupta, R N and Das, A K and Nagahanumaiah, and Henal, S (2016) Pulse Electrocodeposited Ni–WC Composite Coating. Materials and Manufacturing Processes, 31(1) (IF-1.630). pp. 42-47.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications. Journal of Coatings Technology and Research, 9 (4). pp. 495-502.

Jayaraj, J and Srinivasan, A and Arunchandran, C and Rajinikanth, V (2023) Corrosion and in vitro characteristics of cerium phosphate-based chemical conversion coating on AZ31 magnesium alloy. Applied Surface Science, 644 .

Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surface and Coatings Technology, 200 (12-13). pp. 4117-4126.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2006) Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance. Materials Chemistry and Physics, 99 (2-3). pp. 300-308.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2008) Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties. Journal of Alloys and Compounds, 466 (1-2). pp. 412-420.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2005) Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190 (1). pp. 115-121.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Materials Science, 44 (2). pp. 433-440.

Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270.

Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.

Rao, V V and Ravindra, V (2020) Vacuum based coatings for engineering applications. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 57-61.

Sankara Narayanan, T S N (2005) Surface pretretament by phosphate conversion coatings - A review. Reviews in Advanced Materials Science, 9 . pp. 130-177.

Sankara Narayanan, T S N and Baskaran, Irusen and Krishnaveni, K and Parthiban, S (2006) Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance. Surface and Coatings Technology, 200 (11). pp. 3438-3445.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Park, Y W and Lee, K Y (2008) Evaluation of the performance of electroless Ni-B coated brass contacts under fretting conditions. Surface Review and Letters (srl), 15 (4). pp. 443-452.

Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.

Sankara Narayanan, T S N and Seshadri, S K (2000) Cathodic electrosynthesis of alumina thin films and powders. Journal of Materials Science Letters, 19 (19). pp. 1715-1718.

Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.

Sankara Narayanan, T S N and Stephen, A and Guruskanthan, S (2004) Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 179 (1). pp. 56-62.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Shravan Kumar, K and Biswas, Krishanu (2013) Effect of thiourea on grain refinement and defect structure of the pulsed electrodeposited nanocrystalline copper. Surface and Coatings Technology, 214 (IF-1.867). pp. 8-18.

Shravan Kumar, K and Biswas, Krishanu and Balasubramaniam, R (2011) Mechanism of Film Growth of Pulsed Electrodeposition of Nanocrystalline Copper in Presence of Thiourea. Journal of Nanoparticle Research, 13 (11). pp. 6005-6012.

Singh, C B and Gupta, R N and Vaish, A K and Roy, B N (2016) Effect of scale-up, design and process parameters on the productivity of ancient iron making process and recovery of iron in the product. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 191-199.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Vanithakumari, S C and George, R P and Mudali, U Kamachi (2020) High performance specialized coatings for applications in corrosive environments. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 13-27.

Book or NML Publication

UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8

Ray, Ashok K and Goswami, B and Kumar, S B and Das, D K (2008) Efficacy of thermal barrier coated superalloy used in turbines. In: Remaining life assessment of aged components in thermal power plants and petrochemical industries. NML, Jamshedpur, pp. 1-29. ISBN 81-87053-73-1

Sankara Narayanan, T S N (2011) Role of nanomaterials on tribocorrosion. In: Corrosion protection and control using nanomaterials. Woodhead Publishing Ltd., UK, Cambridge, pp. 1-77.

Sankara Narayanan, T S N (2003) The role of surfactants in phosphate conversion coatings. In: Surfactants in Polymers, Coatings, Inks and Adhesives. Applied Surfactant Series, Vol. 1 . Blackwell Publishing Company Ltd., and CRC Press, Oxford, UK, pp. 271-302. ISBN 978 0849 32808 4

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro‐ and electroless composite coatings. In: ENCYCLOPEDIA OF TRIBOLOGY . Springer‐Verlag GmbH, Heidelberg, pp. 1-11.

Conference or Workshop Item

Narang, S K (1999) Coating, plating and paints developed in NML. In: National Seminar on coating, plating and paints, November, 1999, Koraput.

Rajnikanth, V and Husain, M M and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Presentation Slide

Sankara Narayanan, T S N (2010) Corrosion Science and Engineering. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N (2011) Tin plated contacts - Problems due to fretting corrosion and whisker growth. [Presentation Slide] (Unpublished)

Project Reports

Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanick, A K and Kumar, Rahul (2015) Graphene coated on Ni plated steels. Training Report (TR). http://eprints.nmlindia.org, CSIR-NML. (Unpublished)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Thesis

Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.

Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.