Items where Subject is "Metallurgy > Structural Properties"
Group by: Creators | Item Type
Number of items at this level: 61.
Akhtar, M and Khajuria, A and Kumar, V S and Gupta, R K and Albert, S K (2019) Evolution of Microstructure during Welding Simulation of Boron Modified P91 Steel. The Physics of Metals and Metallography, 120(7) (IF-1.169). pp. 672-685.
Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.
Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.
Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885.
Deepa , A and Gopinathan , C and Pandi , P (2019) Investigation on oxide multilayer thin fines solar cells. Journal of Metallurgy and Materials Science, 61(2) . pp. 73-81.
Guguloth, K and Roy, Nilima (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Materials Science and Engineering A, 680 (IF-3.094). pp. 388-404.
Hirabayi , S S and Prakrathi , S (2019) Impact and wear resistance of Al-7072 MMCs reinforced with SiC and Al2 O3. Journal of Metallurgy and Materials Science, 61(3) . pp. 143-149.
Jegannathan, S and Arumugam, T K and Sankara Narayanan, T S N and Ravichandran, K (2009) Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic. Progress in Organic Coatings, 65 (2). pp. 229-236.
Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2005) Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190 (1). pp. 115-121.
Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.
Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2) . pp. 101-108.
Metya, Avijit and Munda, Parikshit and Rajnikanth, V and Roy, Rajat (2016) Failure Analysis of SA213-T22 Re-heater Rear Tube of Thermal Power Plant. Transactions of the Indian Institute of Metals, 69(2) (IF-0.533). pp. 665-668.
Munda, Parikshit and Husain, M M and Soni, M K and Kumar, P and Rajnikanth, V (2019) Metallurgical Investigation of the Collapsed Front Structure of a Dragline in a Coal Mine. Journal of Failure Analysis and Prevention , 19(1) . pp. 161-176.
Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.
Nath, S K and Kumar, Sanjay (2019) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization 10, Issue 7, pp 2045–2055, 10(7) (Waste and Biomass Valorization ). pp. 2045-2055.
Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.
Parmar, Kavita and Bhattacharjee, S (2017) Energetically benign synthesis of lanthanum silicate through "silica garden" route and its characterization. Materials Chemistry and Physics, 194 (IF-2.084). pp. 147-152.
Pramanick, A K (2001) Nature of streaking and ordering in rapidly solidified Al–Co–Cu–Ni system. Materials Science and Engineering, 304-306 . pp. 818-821.
Rai, R K and Sahu, J K (2018) Mechanism of serrated flow in a cast nickel base superalloy. Materials Letters, 210 (IF-2.572). pp. 298-300.
Rai, R K and Sahu, J K and Jena, P S M and Das, Swapan K and Paulose, N and Fernando, C D (2017) High temperature tensile deformation of a directionally solidified nickel base superalloy: Role of micro constituents. Materials Science and Engineering A, 705 (IF-3.094). pp. 189-195.
Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .
Ravikiran, K and Das, Goutam and Kumar, Suranjit and Singh, PK and Sivaprasad, K and Ghosh, M (2019) Narrow gap welding of low alloy and austenitic stainless steels using different Inconel alloys: comparison of microstructure and properties. Materials Research Express, 6(9) (IF-1.449).
Roy, Rajat K and Dutta, Siuli and Panda, A K and Rajnikanth, V and Das, Swapan K and Mitra, A and Strangwood, M and Davis, C L (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (1.632). pp. 1933-1944.
Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.
Sahu, L and Bhattacharya, S and Dey, S (2019) Release analysis of coal fines: Evolution of the methodology and critical issues involved. Journal of the Southern African Institute of Mining and Metallurgy, 119(6) . pp. 595-606.
Saida, S and Chakravarty, S and Sahu, Rina and Das Biswas, Rupa and Chakravarty, K (2020) Laboratory-Scale Tests for the Utilization of High Ash Non-Coking coal in Coke-Making Process. Transactions of the Indian institute of metals, 73(5) (IF-1.205). pp. 1257-1263.
Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.
Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.
Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.
Sankara Narayanan, T S N and Stephen, A and Guruskanthan, S (2004) Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 179 (1). pp. 56-62.
Senthil, P P and Rao, K S and Nandi, H K and Singh, V and Kumar, S and Sankaran, S and Kumar, K S and Madhu, V (2019) Influence of niobium microalloying on the microstructure and mechanical properties of high carbon nano bainitic steel. Procedia Structural Integrity , 14 . pp. 729-737.
Sharma, J (2018) Ferrite salt bath nitrocarburizing process and its various trade names-A review. Journal of Metallurgy and Materials Science , 60(2) . pp. 63-71.
Sindhura, D and Venkata, S M and Murthy, G V S (2019) Comprehensive Microstructural Evaluation of Precipitation in Inconel 718. Metallography, Microstructure, and Analysis, 8(2) . pp. 233-240.
Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279.
Singh, R K and Sahu, K K and Chalavadi, G and Singh, Ratnakar and Padmanabhan, N P H (2019) Separation characteristics of centrifugal fluidized separator using binary density system. Mineral Processing and Extractive Metallurgy Review . pp. 1-8.
Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.
Verma, B and Mishra, Suman K (2019) Spectral and structural investigation of layered growth of copper and graphene deposited by sputtering and annealing. Applied Physics A: Materials Science & Processing, 125(8) .
Book or NML Publication
Director, NML (2019) CSIR-NML Technology Handbook 2019. In: CSIR-NML Technology Handbook 2019. CSIR-NML, Jamshedpur, Jamshedpur, 01-68.
Conference or Workshop Item
Datta, A K (2014) Responses of stiffened plates with varying depth of stiffeners under uniform lateral loads. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.
Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.
Rudrakshi, G B and Goudar, D M and Srivastava, V C (2013) A Comparative Study on Microstructure and Tensile Properties of Spray Formed and Ascast Al-28Si-5Cu-4Fe and Al-28Si-5Cu-4Mg Alloys. In: World Congress on Engineering 2013, July 3-5, 2013, London, UK.
Sivaprasad, S (2012) Lecture Notes (3) Principal Stress, Plane and Angle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)
Sivaprasad, S (2012) Lecture Notes (4) Mohr’s Circle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)
Sivaprasad, S and Paul, Surajit K and Tarafder, S and Gupta, Suneel K and Bhasin, Vivek (2011) Cyclic plastic deformation behaviour of PHT piping materials - an experimental investigation. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .
Director, NML CSIR-NML NEWSLETTER APRIL - 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2020) CSIR-NML NEWSLETTER AUGUST- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2021) CSIR-NML NEWSLETTER JANUARY- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2020) CSIR-NML NEWSLETTER JULY- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2020) CSIR-NML NEWSLETTER JUNE- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2020) CSIR-NML NEWSLETTER MARCH- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Director, NML (2020) CSIR-NML NEWSLETTER SEPTEMBER- 2021. CSIR-NML, Jamshedpur, Jamshedpur.
Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished)
Pramanick, A K and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Minj, R K (2011) Strengthening mechanism of V and Nb microalloyed low C Steel rebars produced through TMT. Collaborative (CLP). CSIR-NML, Jamshdpur. (Unpublished)
Pramanick, A K and Sinha, Arvind (2008) Nano-crystallization Studies on Cobalt containing Bulk Metallic Glasses. Grant in Aid (GAP). CSIR-NML, Jamshdpur. (Unpublished)
Rajnikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)
Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)
Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.
Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .
Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.
Narasaiah, N (2004) Initiation and Growth of Cracks Near Fatigue Threshold in Plain Carbon Steels. PhD thesis, IIT Kharagpur.
Reddy, B V Ramana (2008) Microsturctural variation in Al-Cu-Y Sysytem Under Metastable condition. Masters thesis, CSIR-National Metallurgical Laboratory (NML).