Items where Subject is "Metallurgy > Extractive Metallurgy > Pyrometallurgy"
Group by: Creators | Item Type
Number of items at this level: 55.
Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Evaluation of Thermal Decomposition Characteristics and Kinetic Parameters of Melina Wood. Biofuels (IF-1.130). pp. 1-7.
Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking .
Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.
Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.
Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2). Part II. Chlorination with Cl(2) + O(2). Thermochimica Acta, 506 (1-2). pp. 34-40.
Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2): Part I. Chlorination with Cl(2). Thermochimica Acta, 497 (1-2). pp. 52-59.
Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.
Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.
Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2 . pp. 227-235.
Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.
Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22.
Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.
Pal, J (2019) Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes. Mineral Processing and Extractive Metallurgy Review, 40(4) (IF-1.615). pp. 248-264.
Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.
Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.
Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.
Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576.
Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.
Pal, Jagannath and Ghorai, S and Venugopalan, T (2018) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy . (In Press)
Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56.
Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.
Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7.
Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208.
Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.
Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27.
Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9.
Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95.
Randhawa, N S and Minj, R K (2020) An improved process for the production of low carbon ferromanganese. Transaction of Indian Institute of Metals (IF-1.205). pp. 1-7.
Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.
Y, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4) (0.9). pp. 325-334.
Book or NML Publication
Abhilash, (2008) Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. In: Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. CSIR-NML, Jamshedpur.
Agarwal, Sanjay and Kim, Hong-In and Park, K H and Lee, Jin-Young (2020) Thermodynamic Aspects for Rare Earth Metal Production. In: Rare-Earth Metal Recovery for Green Technologies, Methods and Applications. Springer, Switzerland, pp. 39-56. ISBN ISBN 978-3-030-38105-9 ISBN 978-3-030-38106-6 (eBook)
Agarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook)
Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119.
Pandey, B D and Abhilash, and Meshram, Pratima (2019) An overview of the recent status of critical and strategic metal production and development in India. In: Critical and Rare Earth Elements. CRC Press, Boca Raton, US, pp. 1-36. ISBN 978-0367086473
Conference or Workshop Item
Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Agglomeration of chromite ore fines through direct sintering route. In: International Conference on “Processing of Lean Grade and Urban Ores (IC-LGO 2015), 20-22nd January 2015, Jamshedpur .
Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India.
Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2018) Study on production of low carbon ferrochrome from chromite concentrate. In: Manganese/Chrome Ores & Ferro-Alloy Summit, 15-16th February 2018, Visakhapatnam, India .
Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .
Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Recovery of Cu, Ni, Co and Mn from sea nodules by direct reduction smelting. In: Proceedings of the Eighth (2009) ISOPE Ocean Mining Symposium , 20-24 September 2009, Chennai, India.
Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Studies on recovery of Ni, Co & Cu from polymetallic sea nodules by direct reduction smelting. In: Pyrometallurgy of Nickel and Cobalt 2009, 23- 26 AUGUST 2009, SUDBURY, ONTARIO, Canada.
Ammasi, A and Pal, J (2017) Influence of Carbonaceous materials on the quality of Hematite ore pellets. In: 3rd International Conf. on Science and Technology of ironmaking and steelmaking, Dec. 11- 13th, 2017, Kanpur.
Deo, Brahma and Gupta, P and Malathi, M and Pieter, Koopmans and Overbosch, Aart and Boom, Rob (2006) Theoretical and Practical Aspects of Dissolution of Lime in Laboratory Experiments and in BOF. In: 5th European Oxygen Steelmaking Conference, 26-28, June, 2006, Aachen, Germany.
Jana, R K and Randhawa, N S (2009) Production of Silicomanganese Alloy from Low Manganese Containing Leached Sea Nodules Residue. In: The Eighth (2009) ISOPE Ocean Mining Symposium, September 20-24, 2009, Chennai, India.
Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi.
Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur.
Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.
Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2002) Kinetics aspects of zinc basic carbonate decomposition. In: EPD Congress -2002 (Annual Meeting of the Minerals-Metals-and-Materials-Society ), Feb. 17-21, 2002, Seatle.
Malathi, M and Deo, Brahma and Prasad, N and Sukla, A K and Boom, Rob (2007) Theoretical and Practical Aspects of Lance Skulling and Slag Foaming in BOF Vessels. In: AISTech Conference Proceedings, May 7-10, 2007, Indiana Convention Center, Indianapolis, Ind., USA.
Odusote, Jamiu and Adekunle , Adeleke and Olumuyiwa, Lasode and M, Malathi and Paswan, Dayanand (2019) Optimization of Torrefaction Parameters for High Energetic Yields. In: 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing, September 29-October 3, 2019, Portland, Ore.
Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi.
Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai.
Randhawa, N S and Mishra, D and Jana, R K (2010) Smelting of leached sea nodule residue blended with manganese ore for recovery of manganese. In: 14th Int. Conf. on non-ferrous Min. & Met. 2010, 9-10 July, 2010, Varanasi.
Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .
Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.