Items where Division is "Material Science and Technology" and Year is 1999

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: B | D | G | K | M | P | R | S
Number of items: 30.

B

Bahadur, Aruna (1999) Role of X-ray diffraction in evaluating component integrity. In: Marerials Caracrerizarion Techniques-Principles amd applications, 1999, NML-Jamshedpur.

Bhagat, R P (1999) Factors affecting return sinter fines regimed and strand productivity in iron ore sintering. ISIJ International, 39 (9). pp. 889-895.

Bhattacharya, D K (1999) Magnetic NDT for the characterization of industrial materials. In: UNSPECIFIED.

Bose, A K (1999) Drying behaviour of alumina gel. NML Technical Journal, 40 (1). pp. 37-41.

D

Das, Goutam (1999) Image analysis in quantitative metallography. In: UNSPECIFIED.

Das, Goutam and Sinha, A N and Mishra, Suman K and Bhattacharya, D K (1999) Failure analysis of counter shafts of a centrifugal pump. Engineering Failure Analysis, 6 (4). pp. 267-276.

Das, Samar (1999) Metallographic sample preparation techniques. In: UNSPECIFIED.

Das, Suchandan K (1999) Thermal modelling of DC continuous casting including submould boiling heat transfer. Applied Thermal Engineering, 19 (8). pp. 897-916.

G

Ghosh Chowdhury, S (1999) X-ray diffraction: principles and its application to structural analysis. In: UNSPECIFIED.

K

Kumar, Ramesh A V and Balasubramaniam, R (1999) Delhi iron pillar rust characterization by fourier transform infrared spectroscopy analysis. NML Technical Journal, 40 (1). pp. 31-36.

M

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (1999) Effect of nickel on sintering of self-propagating high-temperature synthesis produced titanium carbide. Journal of Materials Research, 14 (9). pp. 3594-3598.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Mukhopadhyay, N K and Sridhar, G and Parida, N and Tarafder, S and Ranganath, V R (1999) Hydrogen embrittlement failure of hot dip galvanised high tensile wires. Engineering Failure Analysis, 6 (4). pp. 253-265.

Mukhopadhyay, S (1999) Relaxation effects on thermally induced vibrations in a generalized thermoviscoelastic medium with a spherical cavity. Journal of thermal stresses, 22 (9). pp. 829-840.

Murthy, G V S and Ray, Ashok K and Minj, R K and Mukhopadhyay, N K (1999) Microhardness and Fracture Toughness Studies of Decagonal Quasicrystal in Al-Cu-Co System. Journal of Materials Science Letters, 18 (3). pp. 255-258.

Murty, B S and Kori, S A and Venkateswarlu, K and Bhat, R R and Chakraborty, M (1999) Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium. Journal of Materials Processing Technology, 89-90 . pp. 152-158.

P

Palit Sagar, S and Chattoraj, I and Mitra, A (1999) The generation of magnetic bistability in annealed Fe-Si-B fibre by hydrogenation. Journal of Physics D-Applied Physics , 32 (5). pp. 541-545.

Parida, N (1999) Non-destructive testing and evaluation of cast materials. In: UNSPECIFIED.

Parida, N and Sivaprasad, S and Tarafder, S and Ranganath, V R and Bhattacharya, D K (1999) Acoustic emission: A novel technique for the study of fracture micro-mechanisms. Journal of non destructive evaluation, 19 (3). pp. 51-55.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1999) Degradation of BPSCCO superconductors during processing. Journal of Materials Science, 34 (7). pp. 1619-1624.

Pathak, L C and Mishra, Suman K and Bhattacharyya, D and Chopra, K L (1999) Sintering characteristics of Y-Ba-Cu-oxide-Ag-x superconductors. Journal of Materials Research, 14 (11). pp. 4148-4156.

Pathak, L C and Ray, Ashok K and Das, Samar (1999) Carbothermal synthesis of nanocrystalline aluminum nitride powders. Journal of the American Ceramic Society, 82 (1). pp. 257-260.

Puvvada, G V K and Srikanth, S (1999) Recycling of tungsten based heavy alloy scrap. NML Technical Journal, 40 (1). pp. 21-29.

R

Rao, A S and Prasad, V V S and Baligidad, R G and Rao, V R and Sarma, D S (1999) Influence of hot working on electro slag remelted low alloy steel. Transactions of Indian Institute of Metals, 52 (2-3). pp. 139-146.

Ray, Ashok K and Mukhopadhyay, N K and Bhattacharya, D K and Dwarakadasa, E S and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. Bulletin of Materials Science, 22 (1). pp. 25-32.

Ray, Ashok K and Steinbrech, R W (1999) Crack propagation studies of thermal barrier coatings under bending. Journal of the European Ceramic Society, 19 (12). pp. 2097-2109.

S

Singh, S R (1999) Principle of microscopy. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 69-90. ISBN 81-87053-29-1

Sinha, Arvind and Das, Swapan K and Vijaya Kumar, T V and Rao, Venkatesh and Ramachandrarao, P (1999) Synthesis of Nanosized Copper Powder by an Aqueous Route. Journal of Materials Synthesis and Processing, 7 (6). pp. 373-377.

Sridhar, G (1999) Scanning electron microscopy: basic principles and applications. In: Materials characterization techniques: principles and applications. NML, Jamshedpur, pp. 91-107. ISBN 81-87053-29-1

Sridhar, G and Das, Swapan K and Mukhopadhyay, N K (1999) Failure analysis of low carbon free-cutting steel wire rods. Engineering Failure Analysis, 6 (3). pp. 155-172.

This list was generated on Thu Mar 28 22:42:51 2024 IST.