Items where Author is "Poddar, Palash"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 29.

Article

Kumar, D Satish and Suman, K N S and Poddar, Palash (2020) A study on the impact and fatigue failure of AZ91E-Ni coated alumina composites. Canadian metallurgical quarterly (IF-1.456).

Bagui, S and Murugesan, A P and Poddar, Palash (2019) Creep Behavior of As-Cast Mg-10 wt.%Sn and Mg-10 wt.%Sn-3 wt.%Al-1 wt.%Zn Alloys: A Comparative Study. Journal of Materials and Performance, 28(12) . pp. 7616-7628.

Poddar, Palash and Murugesan, A P (2019) Calculation of internal back stress of different gravity-die cast Mg-alloys during creep deformation. Journal of Metallurgy and Materials Science, 61(2) . pp. 61-72.

Poddar, Palash (2018) Review of recent studies in magnesium matrix composites fabricated by stir casting. Journal of Metallurgy and Materials Science, 60(3) . pp. 125-137.

Sameer, Kumar D and Suman, K N S and Poddar, Palash (2017) Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites. Materials Research Express, 4(6) (IF-1.068).

Poddar, Palash and Bagui, Sumanta and Ashok, K and Murugesan, A P (2017) Experimental investigation on microstructure and mechanical properties of gravity-die-cast magnesium alloys. Journal of Alloys and Compounds, 695 (IF-3.133). pp. 895-908.

Poddar, Palash and Gupta, Savita and Sahoo, K L (2017) Magnesium-tin based composites processed through stir casting. Journal of Metallurgy and Materials Science, 59(4) . pp. 153-161.

Poddar, Palash and Kamaraj, A and Murugesan, A P and Bagui, Sumanta and Sahoo, K L (2017) Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. Journal of Magnesium and Alloys, 5(3) . pp. 348-354.

Sameer, Kumar D and Suman, K N S and Sasanka, Tara C and Ravindra, K and Poddar, Palash and Venkata , Siva S B (2017) Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method. Journal of Magnesium and Alloys, 5(1) (IF- ). pp. 48-55.

Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Das, Arpan and Poddar, Palash (2013) Structure–wear-property correlation. Materials & Design, 47 (IF-2.913). pp. 557-565.

Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Poddar, Palash and Sahoo, K L (2012) Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 556 (IF-2.003). pp. 891-905.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Poddar, Palash and Das, Arpan and Sahoo, K L (2012) Effect of rare earth elements on tribological behaviour of magnesium alloys. Tribology: Materials, Surfaces & Interfaces, 6(4) . pp. 147-154.

Sahoo, K L and Poddar, Palash and Kumar, Randhir and Pushp, P T (2009) Strain induced melt activation — an effective route to produce high performance alloy plates and sheets. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 275-278.

Poddar, Palash and Mukherjee, Surojit and Sahoo, K L (2009) The Microstructure and Mechanical Properties of SiC Reinforced Magnesium Based Composites by Rheocasting Process. Journal of Materials Engineering and Performance, 18 (7). pp. 849-855.

Kumar, Randhir and Poddar, Palash and Pushp, P T and Sahoo, K L (2008) Strain Induced Melt Activation (SIMA) - A New Challenging Manufacturing Process for Automotive Applications. Indian Foundry Journal, 54(3) . pp. 35-39.

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671.

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364.

Dey, A K and Poddar, Palash and Singh, K K and Sahoo, K L (2006) Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Materials Science and Engineering A, 435-436 . pp. 521-529.

Conference or Workshop Item

Poddar, Palash (2008) Principles of Metal Working Processes. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Poddar, Palash (2008) Semi-Solid Casting. In: Training Programme on Special Metal Casting and Forming Process - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Project Reports

Gupta, Savita and Poddar, Palash and Sahoo, K L (2012) An investigation on the microstructure and mechanical properties of Mg-Sn based alloys and composites. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

This list was generated on Tue Sep 22 23:01:26 2020 IST.