Items where Year is 2022

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 113.

Annual Reports

Director, NML (2022) Annual Report 2021-2022. CSIR-NML, Jamshedpur.

Article

Abhilash, and Hedrich, Sabrina and Meshram, Pratima and Schippers, Axel and Gupta, A and Sen, Subhadra (2022) Extraction of REEs from Blast Furnace Slag by Gluconobacter oxydans. Minerals, 12(6) .

Abhilash, and Inamdar, I (2022) Recycling of plastic wastes generated from COVID-19: A comprehensive illustration of type and properties of plastics with remedial options. Science of Total Environment, 838(1) .

Akhtar, M and Khajuria, A (2022) The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro-Microdeformation, and Polycrystals' Hardness of Boron Alloyed P91 Steels. Steel Research International .

Ammasi, A and Pal, Jagannath (2022) Kinetics of Carbon Oxidation During Induration of Hematite Ore Pellet. Mining Metallurgy & Exploration .

Andavarapu, Mohana Rao and A, Vidyadhar and Prasad, Ranjit (2022) Recovery of clean coking coal from difficult-to-wash low volatile coking coal fines of Jharia coalfield by multi gravity separator. International Journal of Coal Preparation and Utilization (2.791). pp. 1-21. (In Press)

Andavarapu, Mohana Rao and Vidyadhar, A and Ranjit, Prasad (2022) Beneficiation of difficult-to-wash Indian low volatile coking coal fines by Falcon concentrator. International Journal of Coal Preparation and Utilization, Volume 42, Issue 12 (2.791). pp. 3618-3636.

Bagui, S and Sahu, B P and Mahato, B and Mandal, M and Tarafder, Soumitra and Mitra, R (2022) Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy. Journal of Materials Engineering and Performance .

Bagui, Sumanta and Mandal, M and Sahoo, Biraj K and Laha, K and Tarafder, Soumitra and Mitra, R (2022) Investigation of non-classical creep behavior of Inconel 617 alloy at 700 degrees C and 800 degrees C through interrupted tests and microstructural characterizations. Materials Science and Engineering A, 832 .

Banerjee, Riya and Chakladar, S and Mohanty, Ashok and Chattopadhyay, S K and Kumar, S and Chakravarty, S (2022) Leaching characteristics of rare earth elements from coal ash using organosulphonic acids. Minerals Engineering, 185 .

Bawkar, Shilpa Kalamani and Jha, Manis K and Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Lee, Jae-chun (2022) Application of Environmental Friendly Bio-adsorbent based on a Plant Root for Copper Recovery Compared to the Synthetic Resin. Resources Recycling .

Bharathy, R Sundara and Venugopalan, T and Ghosh, M (2022) A Study on Brittle Cleavage Fracture on Ti-Mo Nano-precipitation-Strengthened High-Strength Steel. J of Mats. Engg. Performance .

Bose, A and Singh, K and Dubey, P and Mishra, S K and Mishra, Suman K (2022) Study of dry sliding wear and corrosion behavior of nanocomposite Al-Si-N coated steel. Surface & Coatings Technology, 441 .

Chakladar, S and Vishwakarma, Dhiraj and Patar, Prasanjeet and Mohanty, Ashok and Chakravarty, S and Patra, Chiranjib (2022) Effect of surfactant, ionic strength, mineralogical composition, and surface morphology on zeta potential of bituminous coals of Indian origin. International Journal of Coal Preparation and Utilization .

Chakraborty, J and Oellers, T and Raghavan, R and Ludwig, A and Dehm, G (2022) Microstructure and residual stress evolution in nanocrystalline Cu-Zr thin films. Journal of Alloys and Compounds, 896 .

Chandan, A K and Kishore, Kaushal and Hung, P T and Ghosh Chowdhury, S and Kawasaki, M and Gubicza, Jeno (2022) Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion. International Journal of Plasticity, 150 .

Chattoraj, I and Kumar, Anil and Das, Swapan K and Tarafder, Mita and Tarafder, Soumitra (2022) Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. International Journal of Materials Research, 94(11) . pp. 1228-1233.

Choubey, Pankaj K and Kumari , Archana and Jha, Manis K and Pathak, Devendra Deo (2022) Recovery of Cobalt as Cobalt Sulfate from Discarded Lithium-Ion Batteries (LIBs) of Mobile Phones. The Minerals, Metals & Minerals Society 2021 .

Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K (2022) Recovery of Lithium from Black Cathode Active Materials of Discarded Lithium-Ion Batteries. The Minerals, Metals & Materials Society 2022 . pp. 739-745.

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology .

Das, A and Chaurasia, P K and Mandal, G K and Goecke, S F and De, AMTV (2022) Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets. Welding in the World .

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita (2022) Preparation and characterization of graphene oxide from coal. Materials Chemistry and Physics, 290 (4.778). p. 126597.

Das, Bhaskar and Hossain, S M and Nandi, A and Samanta, Debabrata and Pramanick, A K and Chapa, S O M and Ray, M (2022) Spectral conversion by silicon nanocrystal dispersed gel glass: efficiency enhancement of silicon solar cell. Journal of Physics D- Applied Physics, 55(2) .

Das, Moususmi and Das, G and Ghosh, M (2022) Prediction of Mechanical Properties of Sensitized Stainless Steel by Neural Network Modeling and Validation Using Ball Indentation Test. J Mats. Engg & Performance .

Das, S and Metya, Avijit Kumar and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, A K (2022) Transduction Efficiency of a Magnetostrictive Sensor for the Generation of Guided Waves in Pipes Using Rapidly Quenched Amorphous Ribbons. IEEE Transaction on Magnetics, 58(6) .

Dey, Swapna and Sivaprasad, S and Das, N and Chattoraj, I (2022) Influence of Hydrogen on Fatigue Crack Growth in 7075 Aluminum Alloy. Journal of Materials Engineering and Performance .

Dhiman, S and Joshi, R S and Singh, S and Gill, S S and Singh, H and Kumar, R and Kumar, Vinod (2022) Recycling of Ti6Al4V machining swarf into additive manufacturing feedstock powder to realise sustainable recycling goals. Journal of Cleaner Production, 348 .

Dinkar, Om Shankar and Panda, Rekha and Choubey, Pankaj K and Hait , Jhumki and Jha , Manis Kumar and Ambade, Balram (2022) Pyrolysis Pre-treatment of PCBs: A Sustainable Solution to Convert Encapsulation into Marketable Product and Separation of Metallic Concentrate. Journal of Metallurgy and Materials Science .

Dinkar, Om Shankar and Parween, Rukshana and Panda, Rekha and Choubey, Pankaj K and Ambade , Balram and Jha, Manis K (2022) Potential hydrometallurgical processes to recycle metals from discarded personal computer. Geosystem Engineering .

Dinkar, Om Shankar and Parween, Rukshana and Singh, Nityanand and Panda, Rekha and Choubey, Pankaj K and Ambade, Balram and Jha, Manis K (2022) Recovery of Nickel from Waste Printed Circuit Boards of Personal Computers. Journal of Metallurgy and Materials Science .

Director , NML (2022) PAB CSIR_NML 2022. PAB NML .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Dutta, A and Sivaji, T and Ghosh, M and Fernandes, R and De, PS and Nayak, D and Sharma, R (2022) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry and Physics, 276 .

Dutta, Chandan and Das, T K and Hawaldar, R and Kumar, J and Sagar, S P (2022) Delineation of Parametric Controls on LTCC-Based Eddy Current Sensor Exposed to High Temperature. IEEE Transactions on Instrumentation and Measurement, 71 .

Gupta, N and Sahu, Ranjan K and Mishra, T and Bhattacharya, P (2022) Microwave-assisted rapid synthesis of titanium phosphate free phosphorus doped Ti3C2 MXene with boosted pseudocapacitance. Journal of Materials Chemistry A .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2022) Role of phosphorus as micro alloying element and its effect on corrosion characteristics of steel rebars in concrete environment. Scientific Reports, 12(1) .

Jha, Manis K (2022) Business opportunities to reclaim metals by urban mining. Journal of Metallurgy and Materials Science .

Jha, Manis K and Choubey, Pankaj K and Dinkar, Om Shankar and Panda, Rekha and Jyothi, Rajesh Kumar and Yoo, Kyoungkeun and Park, Ilhwan (2022) Recovery of Rare Earth Metals (REMs) from Nickel Metal Hydride Batteries of Electric Vehicles. Minerals, 12(1) .

Jha, R and Mishra, G and Agarwal, M and Rao, M D and Meshram, A and Singh, K K (2022) Opportunities for an en-route to polymer inclusion membrane approach from conventional hydrometallurgical recycling of WPCBs: a mini-review. Canadian Metallurgical Quarterly .

Kalamani Bawkar, Shilpa and Choubey, Pankaj Kumar and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K and Lee, Jae-chun (2022) Treatment of industrial effluent to reclaim copper using adsorption technique. Geosystem Engineering, 25(3-4)SI .

Kalamani Bawkar, Shilpa and Hait, Jhumki and Choubey, Pankaj K and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K (2022) Reclamation of Copper from Electronic Industry Effluent Using Plant Root Adsorbent. Journal of Metallurgy and Materials Science .

Kamaraj, A and Mandal, G K and Shanmugam, S P and Roy, G G (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61(2) . pp. 202-215.

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G K and Roy, G G (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 53(4) . pp. 1989-2003.

Kancharla, H and Mandal, G K and Kumar, R R and Chakraborty, A and Singh, S S and Mondal, K (2022) Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Maharana, S H and Singh, S S and Mondal, K (2022) Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet. Surface & Coating Technology, 437 .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel. Surface & Coating Technology, 433 .

Karmaker, P and Mishra, D and Sahu, K K and Agarwal, A (2022) Selective Separation of Iron and Cobalt from Leached Tungsten Carbide Scrap by Solvent Extraction. Journal of Sustainability Metallurgy .

Khajuria, A and Akhtar, M and Bedi, R (2022) Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zoneZugabe von Bor zum Stahl X10CrMoVNbN9-1: Voruntersuchung zu Gefugeentwicklung und Mikroharte in simulierter Warmeeinflusszone. Materialwissenschaft und Werkstofftechnik, 53(10) . pp. 1167-1183.

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Kawasaki, M and Gubicza, Jeno (2022) On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion. Journal of Alloys and Compounds, 904 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance .

Kumar, Pankaj and Husain, M M and Hembrom, S and Roy, B N (2022) Microstructure Property Correlation of Low Alloy Steel Processed through Heat Treatment. YMER, 21(11) . pp. 1-11.

Kumar, Ratnesh and Goel, Himanshi and Jha, S K and Kumar, Shailendra and Kant, Rama (2022) Single potential step chronoamperometry for EC' reaction at rough electrodes: Theory and experiment. Journal of Electroanalytical Chemistry, 905 .

Kumar, Sunil and Mishra, Trilochan and Sahu, Ranjan K (2022) Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation. Journal of Material Chemistry C, 10 (8.06). pp. 12091-12105.

Kumari , Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2022) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. The Minerals, Metals & Minerals Society 2021 .

Kundu, Rajen and Mahada, Pushpa and Chhirang, Bhawna and Das, Bappaditya (2022) Cellulose hydrogels: Green and sustainable soft biomaterials. Current Research in Green and Sustainable Chemistry .

Lee, Jae-chun and Kurniawan, K and Kim, Soo-kyoung and Nguyen, Viet Tu and Pandey, B D (2022) Ionic Liquids-Assisted Solvent Extraction of Precious Metals from Chloride Solutions. Separation and Purification Reviews .

Mahato, P and Murmu, Manilal and Banerjee, P and Mishra, S K (2022) Magnetron sputtered films prepared from sintered Ti-based target and evaluation of tribological properties under the ball on disc condition with varying thickness and load. Journal of Adhesion Science and Technology .

Mandal, M and Patra, S and Chakraborty, R and Saha, Partha and Shome, M (2022) Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets. Materials Characterization, 184 .

Mani, M and Kadam, G G and Konwar, L J and Panda, A B (2022) Ru-supported mesoporous melamine polymers as efficient catalysts for selective hydrogenation of aqueous 5-hydroxymethylfurfural to 2,5-bis-(hydroxymethyl)furan. Biomass Conversion and Biorefinery .

Mani, M and Mariyaselvakumar, M and Samikannu, A and Panda , A B and Konwar, L J and Mikkola, J P (2022) Continuous hydrocyclization of aqueous levulinic acid to ?-valerolactone over bi-functional Ru/NbOPO4/SBA-15 catalyst under mild conditions. Applied Catalysis A General, 643 .

Medunić, Gordana and Chakravarty, Sanchita and Kundu, Rajen (2022) Computational skills in geosciences higher education system for the 21st century. Mathematical methods and terminology in geology 2022 .

Meshram, Pratima and Abhilash, (2022) Strategies for Recycling of Primary and Secondary Resources for Germanium Extraction. Mining Metallurgy & Exploration .

Meshram, Pratima and Virolainen, S and Abhilash, and Sainio, Tuomo (2022) Solvent Extraction for Separation of 99.9% Pure Cobalt and Recovery of Li, Ni, Fe, Cu, Al from Spent LIBs. Metals, 12(6) .

Michla, J R J and Ravi Kumar, B and Prabhu, T Ram and Siengchin, S and Kumar, M A and Rajini, N (2022) Effect of nitriding on mechanical and microstructural properties of Direct Metal Laser Sintered 17-4PH stainless steel. Journal of Materials Research and Technology-JMR&T, 19 . pp. 2810-2821.

Mohanty, Sunati and Swain, Aijit (2022) Design and Simulation Analysis of Dewatering Hydrocyclones. Mining Metallurgy & Exploration . pp. 1277-1284.

Mukherjee, Shreya and Sivaprasad, S and Tarafder, Soumitra and Bhattacharyya, D and Kar, Sujoy Kumar (2022) Influence of ageing on high temperature tensile deformation of a Ni- based superalloy, HAYNES 282. Journal of Alloys and Compounds, 917 .

Murugaiyan, Premkumar and Mitra, A and Roy, Rajat K and Panda, Ashis K (2022) Nanocrystallization and Core-loss properties of Fe-rich FeSiBPNbCu nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 552 .

Nath, S K and Randhawa, N S and Kumar, Sanjay (2022) A review on characteristics of silico-manganese slag and its utilization into construction materials. Resources, Conservation and Recycling, 176 .

Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .

Panda, D and Tripathy, S and Sabat, R K and Suwas, S and Sahoo, S K (2022) An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys. Journal of Materials Engineering and Performance, 31 . pp. 9183-9199.

Panda, Rekha and Dinkar, Om Shankar and Choubey, Pankaj K and Parween, Rukshana and Jha, Manis K and Pathak, D D (2022) Recovery of Precious Metal Silver from Scrap Computer Keyboards. The Minerals, Metals & Materials Society 2022 . pp. 71-81.

Panda, Rekha and Parween, Rukshana and Singh, Nityanand and Yoo, Kyoungkeun and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Scrap computer keyboards a sustainable resource for silver (Ag) and low density oil (L D Oil). Sustainable Materials and Technologies .

Paswan, D and Ansu, J K and Adeleke, A A and Ikubanni, P P and Christopher, C T and Roy, T K and Palai, P and Malathi, M (2022) Understanding casting behaviour of low carbon high manganese steel through detailed characterization of mould powder and mould top slag. Ironmaking & Steelmaking .

Petrovic, M and Fiket, Z and Medunic, G and Chakravarty, S (2022) Mobility of metals and metalloids from SHOS coal ash and slag deposit: mineralogical and geochemical constraints. Environmental Science and Pollution Research, 29(31) . pp. 46916-46928.

Pradhan, S K and Tripathy, S and Singh, Rajan and Murugaiyan, Premkumar and Roy, Debdas and Humane, M M and Chowdhury, S G (2022) On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization. Journal of Alloys and Compounds, 922 .

Prakash, R and Hembrom, K and Majumder, S K (2022) Interpretation of induction time and particle recovery in a microstructured counter-current flow column. Chemical Engineering and Processing-Process Intensification, 176 .

Prakash, R and Sangtam, B T and Hembrom, K and Majumder, S K (2022) Bubble size analysis in a two-phase countercurrent flow in the narrow rectangular column. Physics of Fluids, 34(4) .

Prasad, Sanjay (2022) Zinc powder preparation from zinc dross. Materials Today: Proceedings, 67(SI: Part 2) . pp. 336-341.

Rai, R K and Jena, P S M and Paulose, N and Sahu, J K (2022) Effect of carbide precipitation on Coffin-Manson relationship of a polycrystalline nickel-based superalloy. Fatigue & Fracture of Engineering Materials and Structures .

Ravikiran, K and Mehtani, H and Sivaprasad, K and Prasad , M J N (2022) Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel. International Journal of Pressure Vessels and Piping, 195 .

Roy, Rajat K and Murugaiyan, Premkumar and V, Rajnikanth and Pundir, SPS and Sarkar, Subrata and Panda, Ashis K and Mitra, Amitava (2022) Magnetic Anisotropic Behaviour of CRGO Steels for Quality Assessment. Journal of Nondestructive Evaluation, 41 (2.588). p. 71.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Sahoo, S K and Tripathy, S K and Nayak, A and Hembrom, K C and Dey, S and Rath, R K and Mohanta, M K (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahoo, Saroj and Tripathy, Sunil and Nayak, A. and Hembrom, K. C. and Dey, S. and Rath, R.K and Mohanta, M. K. (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahu, M and Ghosh, Arpita and Singh, S. N. and Sagar, Sarmishtha Palit (2022) Weibull parameter based probability distribution for predicting creep life of power plant materials: A non-destructive approach. Materials Today: Proceedings .

Sarkar, A N and Kumari, Soni and Jagadevan, S and Panda, Asit Baran and Pal, Sagar (2022) Simultaneous in Situ Exfoliation of Titanate and Zn-Cr Layered Double Hydroxides with a Copolymer for Photocatalytic Degradation of Organic Pollutants. ACS Applied Polymer Materials .

Sarma, Y S S and Gupta, N and Bhattacharya, P (2022) A composite electrode of 2D-Ti3C2 (MXene) and polyemeraldine salt of polyaniline for supercapacitor with high areal capacitance. Polymer Engineering & Science .

Selvi, G T and Jha, S K (2022) Anomalous interfacial stress generation and role of elasto-plasticity in mechanical failure of Si-based thin film anodes of Li-ion batteries. Bulletin of Materials Science, 45(1) .

Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Agarwal, A and Sahu, K K (2022) Petro-Mineralogical and Geochemical Evaluation of Glauconitic Rocks of the Ukra Member (Bhuj Formation), Kutch Basin, India. Clays and Clay Minerals, 70(1) . pp. 135-153.

Siddique, A B and Mukhuti, K and Choudhary, S and Pramanick, A K and Hossain, S M and Ray, M (2022) Critical investigation of up-conversion and dual emission from nitrogen functionalized graphene quantum dots. Journal of Luminescence, 244 .

Singh, Komal and Soni, S K and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2022) Influence of temperatures on structure, thermoelectric, and mechanical properties of nanocrystalline SnSe thin films deposited by thermal evaporation. Materials Today Communications, 32 .

Singh, M P and Arora, K S and Gupta, A and Kumar, Rajneesh and Shukla, D K and Jhunjhunwala, K P (2022) Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs. Welding in the World .

Singh, Raghuvir (2022) Integrity of Additively Manufactured Alloys and Component to Environmental Degradation. Journal of Materials Engineering and Performance .

Singh , Nityanand and Dinkar, Om Shankar and Choubey, Pankaj K and Panda, Rekha and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Recycling of Nd-Fe-B Magnets to Reclaim Nd Salt and Pigment. Journal of Metallurgy and Materials Science, .

Singla, Rashmi and Senna, Mamoru and Mishra, T and Alex, T C and Kumar, Sanjay (2022) High strength metakaolin/epoxy hybrid geopolymers: Synthesis, characterization and mechanical properties. Applied Clay Science, 221 .

Sinha, Shivendra and De, S and Mishra, D and Shekhar, S and Agarwal, A and Sahu, K K (2022) Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies. Journal of Hazardous Materials, 425 .

Sirohi, S and Gupta, A and Pandey, C and Vidyarthy, R S and Guguloth, K and Natu, H (2022) Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Optics & Laser Technology, 147 .

Tiwari, S K and Rao, A U and Chawla, V and Dubey, Paritosh and Saxena, V and Chawla, A K and Avasthi, D K (2022) Synthesis and characterization of sputter-deposited Ni-rich Ni3Al hard coatings. Journal of Alloys and Compounds, 926 .

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Yadav, Anshul and Mandal, J R and Panda, Asit Baran and Shahi, Vinod K (2022) Structural tailoring of ceria nanoparticles for fabricating fouling resistant nanocomposite membranes with high flux distillation. Colloids and Surfaces A Physicochemical and Engineering Aspects, 633 .

Yeon, J S and Gupta, N and Bhattacharya, P and Park , H S (2022) A New Era of Integrative Ice Frozen Assembly into Multiscale Architecturing of Energy Materials. Advanced Functional Materials, 32(19) .

Book or NML Publication

Meena, L K and Sinha, A K and Seshagiri, R and Singh, R (2022) Effects of Strontium Addition on Corrosion Properties of Al-12Si Alloy. In: Recent Trends in Electrochemical Science and Technology. Springer Proceedings in Materials, 15 . Springer, Singapore, pp. 35-52. ISBN 978-981-16-7553-9

Conference or Workshop Item

Ajita, Kumari and Vasumathi, N and Vijaya Kumar, T V (2022) Flotation Studies on Optimization of Carbon Recovery from Steel Plant Sludge. In: Abstracts of the International Chemical Engineering Conference 2021 (ICheEC2021) , September 17-19, 2021, Online.

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Banerjee, Riya and Chakladar, S and Chakravarty, S (2022) Extraction of Rare Earth Metals from Coal Ash Using Mild Lixiviants in a Single Step Process. In: 8th Symposium on Rare Metal Extraction and Proceeding at the The-Minerals-Metals-Materials-Society (TMS)Annual Meeting, February 27-March 03, 2022, Anaheim, C A.

Kumar, Sudip and Sen , Arindam and Kundu, Rajen (2022) Recycling of Valuables from Spent Lithium-Ion Batteries for Sustainable Development in Energy Storage Systems. In: International Conference on Net-zero Emission Technologies for Sustainable Development: Challenges and Opportunities (N0ET-2022), Dec 12-13, 2022, Department of Chemical Engineering Indian Institute of Technology (ISM) Dhanbad, Dhanbad-826004.

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S N and Sagar, S P (2022) Weibull parameter based probability distribution for predicting creep life of power plant materials: A non-destructive approach. In: 3rd International Conference on Recent Advances in Materials and Manufacturing (ICRAMM), November 25-26, 2021, India.

Sai Kumar, M and Vasumathi, N and Vijaya Kumar, T V (2022) Utilization of Limestone Mineral Wastes for Developing Self-compacting Micro Concrete. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021) , September 17-19, 2021, Online.

Vasumathi, N and Sai Kumar, M and Vijaya Kumar, T V and Gopalkrishna, S J (2022) Extraction and Flotation Performance Evaluation of Bio-collector in High Ash Graphite Ore Beneficiation. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021), September 17-19, 2021, Online.

This list was generated on Thu Mar 28 10:29:12 2024 IST.