Items where Year is 2022

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 116.

Abhilash, and Hedrich, Sabrina and Meshram, Pratima and Schippers, Axel and Gupta, A and Sen, Subhadra (2022) Extraction of REEs from Blast Furnace Slag by Gluconobacter oxydans. Minerals, 12(6) .

Abhilash, and Inamdar, I (2022) Recycling of plastic wastes generated from COVID-19: A comprehensive illustration of type and properties of plastics with remedial options. Science of Total Environment, 838(1) .

Ajita, Kumari and Vasumathi, N and Vijaya Kumar, T V (2022) Flotation Studies on Optimization of Carbon Recovery from Steel Plant Sludge. In: Abstracts of the International Chemical Engineering Conference 2021 (ICheEC2021) , September 17-19, 2021, Online.

Akhtar, M and Khajuria, A (2022) The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro-Microdeformation, and Polycrystals' Hardness of Boron Alloyed P91 Steels. Steel Research International .

Ammasi, A and Pal, Jagannath (2022) Kinetics of Carbon Oxidation During Induration of Hematite Ore Pellet. Mining Metallurgy & Exploration .

Andavarapu, Mohana Rao and A, Vidyadhar and Prasad, Ranjit (2022) Recovery of clean coking coal from difficult-to-wash low volatile coking coal fines of Jharia coalfield by multi gravity separator. International Journal of Coal Preparation and Utilization (2.791). pp. 1-21. (In Press)

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Arora, P and Tewary, S and Krishnamurthi, S and Kumari, Neelam (2022) Development of a low-cost copper device for the inactivation of microorganisms in drinking water for human consumption. Journal of Water Process Engineering, 50 .

Bagui, S and Sahu, B P and Mahato, B and Mandal, M and Tarafder, Soumitra and Mitra, R (2022) Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy. Journal of Materials Engineering and Performance .

Bagui, Sumanta and Mandal, M and Sahoo, Biraj K and Laha, K and Tarafder, Soumitra and Mitra, R (2022) Investigation of non-classical creep behavior of Inconel 617 alloy at 700 degrees C and 800 degrees C through interrupted tests and microstructural characterizations. Materials Science and Engineering A, 832 .

Banerjee, Riya and Chakladar, S and Chakravarty, S (2022) Extraction of Rare Earth Metals from Coal Ash Using Mild Lixiviants in a Single Step Process. In: 8th Symposium on Rare Metal Extraction and Proceeding at the The-Minerals-Metals-Materials-Society (TMS)Annual Meeting, February 27-March 03, 2022, Anaheim, C A.

Banerjee, Riya and Chakladar, S and Mohanty, Ashok and Chattopadhyay, S K and Kumar, S and Chakravarty, S (2022) Leaching characteristics of rare earth elements from coal ash using organosulphonic acids. Minerals Engineering, 185 .

Bawkar, Shilpa Kalamani and Jha, Manis K and Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Lee, Jae-chun (2022) Application of Environmental Friendly Bio-adsorbent based on a Plant Root for Copper Recovery Compared to the Synthetic Resin. Resources Recycling .

Bharathy, R Sundara and Venugopalan, T and Ghosh, M (2022) A Study on Brittle Cleavage Fracture on Ti-Mo Nano-precipitation-Strengthened High-Strength Steel. J of Mats. Engg. Performance .

Bose, A and Singh, K and Dubey, P and Mishra, S K and Mishra, Suman K (2022) Study of dry sliding wear and corrosion behavior of nanocomposite Al-Si-N coated steel. Surface & Coatings Technology, 441 .

Chakladar, S and Mallick, S and Mohanty, Ashok and Vishwakarma, Dhiraj and Chakravarty, S (2022) Natural gums as a novel, potent, and natural additive towards coke making: a preliminary feasibility study. International Journal of Coal preparation and utilaization, 43(11) . pp. 1976-1992.

Chakladar, S and Vishwakarma, Dhiraj and Patar, Prasanjeet and Mohanty, Ashok and Chakravarty, S and Patra, Chiranjib (2022) Effect of surfactant, ionic strength, mineralogical composition, and surface morphology on zeta potential of bituminous coals of Indian origin. International Journal of Coal Preparation and Utilization .

Chandan, A K and Kishore, Kaushal and Hung, P T and Ghosh Chowdhury, S and Kawasaki, M and Gubicza, Jeno (2022) Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion. International Journal of Plasticity, 150 .

Chattoraj, I and Kumar, Anil and Das, Swapan K and Tarafder, Mita and Tarafder, Soumitra (2022) Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. International Journal of Materials Research, 94(11) . pp. 1228-1233.

Choubey, Pankaj K and Parween, Rukshana and Panda, Rekha and Dinkar, Om Shankar and Jha, Manis K (2022) Recovery of Lithium from Black Cathode Active Materials of Discarded Lithium-Ion Batteries. The Minerals, Metals & Materials Society 2022 . pp. 739-745.

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology .

Das, A and Chaurasia, P K and Mandal, G K and Goecke, S F and De, AMTV (2022) Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets. Welding in the World .

Das, Bappaditya and Kundu, Rajen and Chakravarty, Sanchita (2022) Preparation and characterization of graphene oxide from coal. Materials Chemistry and Physics, 290 (4.778). p. 126597.

Das, Bhaskar and Hossain, S M and Nandi, A and Samanta, Debabrata and Pramanick, A K and Chapa, S O M and Ray, M (2022) Spectral conversion by silicon nanocrystal dispersed gel glass: efficiency enhancement of silicon solar cell. Journal of Physics D- Applied Physics, 55(2) .

Das, Moususmi and Das, G and Ghosh, M (2022) Prediction of Mechanical Properties of Sensitized Stainless Steel by Neural Network Modeling and Validation Using Ball Indentation Test. J Mats. Engg & Performance .

Das, S and Metya, Avijit Kumar and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, A K (2022) Transduction Efficiency of a Magnetostrictive Sensor for the Generation of Guided Waves in Pipes Using Rapidly Quenched Amorphous Ribbons. IEEE Transaction on Magnetics, 58(6) .

Dey, Swapna and Sivaprasad, S and Das, N and Chattoraj, I (2022) Influence of Hydrogen on Fatigue Crack Growth in 7075 Aluminum Alloy. Journal of Materials Engineering and Performance .

Dhiman, S and Joshi, R S and Singh, S and Gill, S S and Singh, H and Kumar, R and Kumar, Vinod (2022) Recycling of Ti6Al4V machining swarf into additive manufacturing feedstock powder to realise sustainable recycling goals. Journal of Cleaner Production, 348 .

Dinkar, Om Shankar and Panda, Rekha and Choubey, Pankaj K and Hait , Jhumki and Jha , Manis Kumar and Ambade, Balram (2022) Pyrolysis Pre-treatment of PCBs: A Sustainable Solution to Convert Encapsulation into Marketable Product and Separation of Metallic Concentrate. Journal of Metallurgy and Materials Science, 64(1-2) .

Dinkar, Om Shankar and Parween, Rukshana and Panda, Rekha and Choubey, Pankaj K and Ambade , Balram and Jha, Manis K (2022) Potential hydrometallurgical processes to recycle metals from discarded personal computer. Geosystem Engineering . pp. 132-142.

Dinkar, Om Shankar and Parween, Rukshana and Singh, Nityanand and Panda, Rekha and Choubey, Pankaj K and Ambade, Balram and Jha, Manis K (2022) Recovery of Nickel from Waste Printed Circuit Boards of Personal Computers. Journal of Metallurgy and Materials Science, 64(1-2) .

Director, NML (2022) Annual Report 2021-2022. CSIR-NML, Jamshedpur.

Director , NML (2022) PAB CSIR_NML 2022. PAB NML .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Dutta, A and Sivaji, T and Ghosh, M and Fernandes, R and De, PS and Nayak, D and Sharma, R (2022) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry and Physics, 276 .

Dutta, Chandan and Das, T K and Hawaldar, R and Kumar, J and Sagar, S P (2022) Delineation of Parametric Controls on LTCC-Based Eddy Current Sensor Exposed to High Temperature. IEEE Transactions on Instrumentation and Measurement, 71 .

Gupta, N and Sahu, Ranjan K and Mishra, T and Bhattacharya, P (2022) Microwave-assisted rapid synthesis of titanium phosphate free phosphorus doped Ti3C2 MXene with boosted pseudocapacitance. Journal of Materials Chemistry A .

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2022) Role of phosphorus as micro alloying element and its effect on corrosion characteristics of steel rebars in concrete environment. Scientific Reports, 12(1) .

Jha, Manis K (2022) Business opportunities to reclaim metals by urban mining. Journal of Metallurgy and Materials Science, 64(1-2) .

Jha, R and Mishra, G and Agarwal, M and Rao, M D and Meshram, A and Singh, K K (2022) Opportunities for an en-route to polymer inclusion membrane approach from conventional hydrometallurgical recycling of WPCBs: a mini-review. Canadian Metallurgical Quarterly .

Kalamani Bawkar, Shilpa and Choubey, Pankaj Kumar and Parween, Rukshana and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K and Lee, Jae-chun (2022) Treatment of industrial effluent to reclaim copper using adsorption technique. Geosystem Engineering, 25(3-4)SI .

Kalamani Bawkar, Shilpa and Hait, Jhumki and Choubey, Pankaj K and Panda, Rekha and Singh, Pramod Kumar and Jha, Manis K (2022) Reclamation of Copper from Electronic Industry Effluent Using Plant Root Adsorbent. Journal of Metallurgy and Materials Science, 64(1-2) .

Kamaraj, A and Mandal, G K and Shanmugam, S P and Roy, G G (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61(2) . pp. 202-215.

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G K and Roy, G G (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 53(4) . pp. 1989-2003.

Kancharla, H and Mandal, G K and Kumar, R R and Chakraborty, A and Singh, S S and Mondal, K (2022) Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Maharana, S H and Singh, S S and Mondal, K (2022) Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet. Surface & Coating Technology, 437 .

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel. Surface & Coating Technology, 433 .

Karmaker, P and Mishra, D and Sahu, K K and Agarwal, A (2022) Selective Separation of Iron and Cobalt from Leached Tungsten Carbide Scrap by Solvent Extraction. Journal of Sustainability Metallurgy .

Khajuria, A and Akhtar, M and Bedi, R (2022) Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zoneZugabe von Bor zum Stahl X10CrMoVNbN9-1: Voruntersuchung zu Gefugeentwicklung und Mikroharte in simulierter Warmeeinflusszone. Materialwissenschaft und Werkstofftechnik, 53(10) . pp. 1167-1183.

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Kawasaki, M and Gubicza, Jeno (2022) On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion. Journal of Alloys and Compounds, 904 .

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2022) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Kishore, Kaushal and Kushwaha, S and Teja, K S P and Chandan, A K and Mukherjee, M and Adhikary, M and Kumar, A (2022) Sigma phase embrittlement-induced failures of heat-resistant stainless steel traveling grate links. Engineering Failure Analysis, 144 .

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance .

Kumar, Pankaj and Husain, M M and Hembrom, S and Roy, B N (2022) Microstructure Property Correlation of Low Alloy Steel Processed through Heat Treatment. YMER, 21(11) . pp. 1-11.

Kumar, Ratnesh and Goel, Himanshi and Jha, S K and Kumar, Shailendra and Kant, Rama (2022) Single potential step chronoamperometry for EC' reaction at rough electrodes: Theory and experiment. Journal of Electroanalytical Chemistry, 905 .

Kumar, Sudip and Sen , Arindam and Kundu, Rajen (2022) Recycling of Valuables from Spent Lithium-Ion Batteries for Sustainable Development in Energy Storage Systems. In: International Conference on Net-zero Emission Technologies for Sustainable Development: Challenges and Opportunities (N0ET-2022), Dec 12-13, 2022, Department of Chemical Engineering Indian Institute of Technology (ISM) Dhanbad, Dhanbad-826004.

Kumar, Sunil and Mishra, Trilochan and Sahu, Ranjan K (2022) Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation. Journal of Material Chemistry C, 10 (8.06). pp. 12091-12105.

Kumari , Archana and Choubey, Pankaj K and Gupta, Rajesh and Jha, Manis K (2022) Recovery of Lithium (Li) Salts from Industrial Effluent of Recycling Plant. The Minerals, Metals & Minerals Society 2021 .

Kundu, Rajen and Mahada, Pushpa and Chhirang, Bhawna and Das, Bappaditya (2022) Cellulose hydrogels: Green and sustainable soft biomaterials. Current Research in Green and Sustainable Chemistry .

Lee, Jae-chun and Kurniawan, K and Kim, Soo-kyoung and Nguyen, Viet Tu and Pandey, B D (2022) Ionic Liquids-Assisted Solvent Extraction of Precious Metals from Chloride Solutions. Separation and Purification Reviews .

Mahato, P and Murmu, Manilal and Banerjee, P and Mishra, S K (2022) Magnetron sputtered films prepared from sintered Ti-based target and evaluation of tribological properties under the ball on disc condition with varying thickness and load. Journal of Adhesion Science and Technology .

Mandal, M and Patra, S and Chakraborty, R and Saha, Partha and Shome, M (2022) Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets. Materials Characterization, 184 .

Mani, M and Kadam, G G and Konwar, L J and Panda, A B (2022) Ru-supported mesoporous melamine polymers as efficient catalysts for selective hydrogenation of aqueous 5-hydroxymethylfurfural to 2,5-bis-(hydroxymethyl)furan. Biomass Conversion and Biorefinery .

Mani, M and Mariyaselvakumar, M and Samikannu, A and Panda , A B and Konwar, L J and Mikkola, J P (2022) Continuous hydrocyclization of aqueous levulinic acid to ?-valerolactone over bi-functional Ru/NbOPO4/SBA-15 catalyst under mild conditions. Applied Catalysis A General, 643 .

Medunić, Gordana and Chakravarty, Sanchita and Kundu, Rajen (2022) Computational skills in geosciences higher education system for the 21st century. Mathematical methods and terminology in geology 2022 .

Meena, L K and Sinha, A K and Seshagiri, R and Singh, R (2022) Effects of Strontium Addition on Corrosion Properties of Al-12Si Alloy. In: Recent Trends in Electrochemical Science and Technology. Springer Proceedings in Materials, 15 . Springer, Singapore, pp. 35-52. ISBN 978-981-16-7553-9

Meshram, Pratima and Abhilash, (2022) Strategies for Recycling of Primary and Secondary Resources for Germanium Extraction. Mining Metallurgy & Exploration .

Meshram, Pratima and Pandey, B D and Mankhand, T R (2022) Recovery of valuable metals from cathodic active material of spent lithium-ion batteries: Leaching and kinetic aspects. Waste Management, 45 . pp. 306-313.

Meshram, Pratima and Virolainen, S and Abhilash, and Sainio, Tuomo (2022) Solvent Extraction for Separation of 99.9% Pure Cobalt and Recovery of Li, Ni, Fe, Cu, Al from Spent LIBs. Metals, 12(6) .

Meshram, Rohit B and Yenni, Usha and Kundu, Gautam and Mukerjee, D (2022) Investigation of Operating Parameters' Effects on Bubble Characteristics in a Co-Current Downflow Bubble Column. Iranian Journal of Chemistry & Chemical Engineering- International English Edition, 41(10) . pp. 3526-3535.

Michla, J R J and Ravi Kumar, B and Prabhu, T Ram and Siengchin, S and Kumar, M A and Rajini, N (2022) Effect of nitriding on mechanical and microstructural properties of Direct Metal Laser Sintered 17-4PH stainless steel. Journal of Materials Research and Technology-JMR&T, 19 . pp. 2810-2821.

Mohanty, Sunati and Swain, Aijit (2022) Design and Simulation Analysis of Dewatering Hydrocyclones. Mining Metallurgy & Exploration . pp. 1277-1284.

Mukherjee, Shreya and Sivaprasad, S and Tarafder, Soumitra and Bhattacharyya, D and Kar, Sujoy Kumar (2022) Influence of ageing on high temperature tensile deformation of a Ni- based superalloy, HAYNES 282. Journal of Alloys and Compounds, 917 .

Murugaiyan, Premkumar and Mitra, A and Roy, Rajat K and Panda, Ashis K (2022) Nanocrystallization and Core-loss properties of Fe-rich FeSiBPNbCu nanocrystalline alloy. Journal of Magnetism and Magnetic Materials, 552 .

Nandi, Sukalpan and Kumar, Sunil (2022) Atomistic structural transformation of iron single crystal under bi-axial stretching using classical molecular dynamics simulation. Bulletin of Materials Science, 45(4) .

Omiogbemi, I M B and Faci, N D and Gummadi, A K and Negash, S M and Sardar, B and Gad, S M and Dagwa, I M and Audu, S T (2022) The Influence of Arc Welding Process on the Mechanical and Microstructural Characteristics of Low Carbon Steel in a Corrosive Environment. Macromolecular Symposia .

Omiogbemi, I M B and Yawas, D S and Das, Atanu and Afolayan, M O and Dauda, E and Kumar, Roshan and Gorja, S R and Chowdhury, S G (2022) Mechanical properties and corrosion behavior of duplex stainless steel weldment using novel electrodes. Scientific Reports, 12(1) .

Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .

Panda, D and Tripathy, S and Sabat, R K and Suwas, S and Sahoo, S K (2022) An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys. Journal of Materials Engineering and Performance, 31 . pp. 9183-9199.

Panda, Rekha and Dinkar, Om Shankar and Choubey, Pankaj K and Parween, Rukshana and Jha, Manis K and Pathak, D D (2022) Recovery of Precious Metal Silver from Scrap Computer Keyboards. The Minerals, Metals & Materials Society 2022 . pp. 71-81.

Panda, Rekha and Parween, Rukshana and Singh, Nityanand and Yoo, Kyoungkeun and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Scrap computer keyboards a sustainable resource for silver (Ag) and low density oil (L D Oil). Sustainable Materials and Technologies .

Paswan, D and Ansu, J K and Adeleke, A A and Ikubanni, P P and Christopher, C T and Roy, T K and Palai, P and Malathi, M (2022) Understanding casting behaviour of low carbon high manganese steel through detailed characterization of mould powder and mould top slag. Ironmaking & Steelmaking .

Petrovic, M and Fiket, Z and Medunic, G and Chakravarty, S (2022) Mobility of metals and metalloids from SHOS coal ash and slag deposit: mineralogical and geochemical constraints. Environmental Science and Pollution Research, 29(31) . pp. 46916-46928.

Pradhan, Priyatosh and Shadangi, Y and Shivam, V and Mukhopadhyay, N K (2022) Powder metallurgical processing of CrMnFeCoMo high entropy alloy: Phase evolution, microstructure, thermal stability and mechanical properties. Journal of Alloys and Compounds, 935 Part 2 .

Pradhan, S K and Tripathy, S and Singh, Rajan and Murugaiyan, Premkumar and Roy, Debdas and Humane, M M and Chowdhury, S G (2022) On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization. Journal of Alloys and Compounds, 922 .

Prakash, R and Hembrom, K and Majumder, S K (2022) Interpretation of induction time and particle recovery in a microstructured counter-current flow column. Chemical Engineering and Processing-Process Intensification, 176 .

Prakash, R and Sangtam, B T and Hembrom, K and Majumder, S K (2022) Bubble size analysis in a two-phase countercurrent flow in the narrow rectangular column. Physics of Fluids, 34(4) .

Prasad, Sanjay (2022) Zinc powder preparation from zinc dross. Materials Today: Proceedings, 67(SI: Part 2) . pp. 336-341.

Rai, R K and Jena, P S M and Paulose, N and Sahu, J K (2022) Effect of carbide precipitation on Coffin-Manson relationship of a polycrystalline nickel-based superalloy. Fatigue & Fracture of Engineering Materials and Structures .

Ravikiran, K and Mehtani, H and Sivaprasad, K and Prasad , M J N (2022) Influence of nickel-based buttering material on welded joint between SA508 low alloy steel and 304LN stainless steel. International Journal of Pressure Vessels and Piping, 195 .

Roy, Rajat K and Murugaiyan, Premkumar and V, Rajnikanth and Pundir, SPS and Sarkar, Subrata and Panda, Ashis K and Mitra, Amitava (2022) Magnetic Anisotropic Behaviour of CRGO Steels for Quality Assessment. Journal of Nondestructive Evaluation, 41 (2.588). p. 71.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Sahoo, Saroj and Tripathy, Sunil and Nayak, A. and Hembrom, K. C. and Dey, S. and Rath, R.K and Mohanta, M. K. (2022) Beneficiation of lithium bearing pegmatite rock: a review. Mineral Processing and Extractive Metallurgy Review .

Sahu, M and Ghosh, Arpita and Singh, S. N. and Sagar, Sarmishtha Palit (2022) Weibull parameter based probability distribution for predicting creep life of power plant materials: A non-destructive approach. Materials Today: Proceedings .

Sahu, M and Ghosh, Arpita and Kumar, J and Singh, S N and Sagar, S P (2022) Weibull parameter based probability distribution for predicting creep life of power plant materials: A non-destructive approach. In: 3rd International Conference on Recent Advances in Materials and Manufacturing (ICRAMM), November 25-26, 2021, India.

Sai Kumar, M and Vasumathi, N and Vijaya Kumar, T V (2022) Utilization of Limestone Mineral Wastes for Developing Self-compacting Micro Concrete. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021) , September 17-19, 2021, Online.

Sarkar, A N and Kumari, Soni and Jagadevan, S and Panda, Asit Baran and Pal, Sagar (2022) Simultaneous in Situ Exfoliation of Titanate and Zn-Cr Layered Double Hydroxides with a Copolymer for Photocatalytic Degradation of Organic Pollutants. ACS Applied Polymer Materials .

Sarma, Y S S and Gupta, N and Bhattacharya, P (2022) A composite electrode of 2D-Ti3C2 (MXene) and polyemeraldine salt of polyaniline for supercapacitor with high areal capacitance. Polymer Engineering & Science .

Selvi, G T and Jha, S K (2022) Anomalous interfacial stress generation and role of elasto-plasticity in mechanical failure of Si-based thin film anodes of Li-ion batteries. Bulletin of Materials Science, 45(1) .

Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Agarwal, A and Sahu, K K (2022) Petro-Mineralogical and Geochemical Evaluation of Glauconitic Rocks of the Ukra Member (Bhuj Formation), Kutch Basin, India. Clays and Clay Minerals, 70(1) . pp. 135-153.

Siddique, A B and Mukhuti, K and Choudhary, S and Pramanick, A K and Hossain, S M and Ray, M (2022) Critical investigation of up-conversion and dual emission from nitrogen functionalized graphene quantum dots. Journal of Luminescence, 244 .

Singh, Komal and Soni, S K and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2022) Influence of temperatures on structure, thermoelectric, and mechanical properties of nanocrystalline SnSe thin films deposited by thermal evaporation. Materials Today Communications, 32 .

Singh, M P and Arora, K S and Gupta, A and Kumar, Rajneesh and Shukla, D K and Jhunjhunwala, K P (2022) Experimental characterization of dynamic fracture toughness behavior of X80 pipeline steel welded joints for different heat inputs. Welding in the World .

Singh, Raghuvir (2022) Integrity of Additively Manufactured Alloys and Component to Environmental Degradation. Journal of Materials Engineering and Performance .

Singh , Nityanand and Dinkar, Om Shankar and Choubey, Pankaj K and Panda, Rekha and Jyothi, Rajesh Kumar and Jha, Manis K (2022) Recycling of Nd-Fe-B Magnets to Reclaim Nd Salt and Pigment. Journal of Metallurgy and Materials Science, .

Singla, Rashmi and Senna, Mamoru and Mishra, T and Alex, T C and Kumar, Sanjay (2022) High strength metakaolin/epoxy hybrid geopolymers: Synthesis, characterization and mechanical properties. Applied Clay Science, 221 .

Sirohi, S and Gupta, A and Pandey, C and Vidyarthy, R S and Guguloth, K and Natu, H (2022) Investigation of the microstructure and mechanical properties of the laser welded joint of P22 and P91 steel. Optics & Laser Technology, 147 .

Tiwari, S K and Rao, A U and Chawla, V and Dubey, Paritosh and Saxena, V and Chawla, A K and Avasthi, D K (2022) Synthesis and characterization of sputter-deposited Ni-rich Ni3Al hard coatings. Journal of Alloys and Compounds, 926 .

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Vasumathi, N and Sai Kumar, M and Vijaya Kumar, T V and Gopalkrishna, S J (2022) Extraction and Flotation Performance Evaluation of Bio-collector in High Ash Graphite Ore Beneficiation. In: Abstracts of the International Chemical Engineering Conference 2021: 100 Glorious Years of Chemical Engineering & Technology” (ICheEC2021), September 17-19, 2021, Online.

Verma, A K and Johari, K K and Dubey, P and Sharma, D K and Kumar, S and Dhakate, S R and Candolfi, C and Lenoir, B and Gahtori, B (2022) Realization of Band Convergence in p-Type TiCoSb Half-Heusler Alloys Significantly Enhances the Thermoelectric Performance. ACS Applied Materials & Interfaces, 15(1) . pp. 942-952.

Yeon, J S and Gupta, N and Bhattacharya, P and Park , H S (2022) A New Era of Integrative Ice Frozen Assembly into Multiscale Architecturing of Energy Materials. Advanced Functional Materials, 32(19) .

This list was generated on Sat Dec 7 21:29:35 2024 IST.