Items where Year is 2016

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 166.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking, 43(2) (IF-0.985). pp. 97-111.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .

Agrawal, A and Mishra, D and Sahu, K K (2016) Comparative performance assessment of solvents for the extraction of H2SO4 from spent electrolytic bleed stream of copper industry. Journal of Molecular Liquids, 220 (IF-3.648). pp. 82-91.

Ahmed, Zanab and Kumari, Sarita and Goswami, N G and Sinha, Arvind and Bandyopadhyaya, Rajib (2016) A Report on the 6th Annual Conference of "National Academy of Sciences, India (NASI)" (September 24-25, 2014; Venue-CSIR-National Metallurgical Laboratory, Jamshedpur-831007). National Academy Science Letters - India, 39(2) (IF-0.369). pp. 133-134.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2016) Mechanical Activation of Al-oxyhydroxide Minerals–A Review. Mineral Processing and Extractive Metallurgy Review, 37(1) (IF-1.219). pp. 1-26.

Aman, Noor and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal of Environmental Chemical Engineering, 4 (IF-1.355). pp. 191-196.

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Anand, Kumar Aniket and Nageswaran, Kartik and Kumar, Vinod and Saxena, Atul (2016) Hot deformation studies on 2.7% Si steel using gleeble thermo-mechanical simulator. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 251-258.

Anand, Rounak Sneh and Kumar, Prakash and Paswan, Dayanand (2016) Conversion of Sponge Iron From Low Grade Iron ore And Mill Scale Through Simulating Tunnel Kiln Condition. IOSR Journal of Mechanical and Civil Engineering, 13(5) . pp. 49-54.

Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113.

Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885.

Banerjee, Amit and Mishra, P R and Mohanty, Ashok and Chakravarty, K and Das Biswas, Rupa and Sahu, Rina and Chakravarty, S (2016) Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures. International Journal of Coal Science & Technology, 3(2) (SNIP-3.554). pp. 97-103.

Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash R and Pancholi, Vivek and Bhattacharjee, A (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science, 58(3) (IF 0.04). pp. 147-152.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.

Beato-lopez, J J and De la cruz blas, Ca and Mitra, Amitava and Gomez-polo, C (2016) Electrical model of giant magnetoimpedance sensors based on continued fractions. Sensors and Actuators A - Physical, 242 (IF-2.499). pp. 73-78.

Behera, R R and Sankar, M R and Swaminathan, J and Khare, Alika (2016) Experimental investigation of underwater laser beam micromachining (UW-LB mu M) on 304 stainless steel. International Journal Of Advanced Manufacturing Technology, 85(9-12) (IF-2.209). pp. 1969-1982.

Bhaskar Raju, G and Ratchambhigai, S and Rao, Ananda and Vasumathi, N and Vijaya Kumar, T V and Prabhakar, S and Subba Rao, S (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the indian institute of metals, 69(1) (IF-0.62). pp. 75-81.

Bhattacharya, Maitreyee (2016) Reaction Mechanism and Thermodynamics of Segregation Roasting of Iron Oxide. International Journal of Mineral Processing and Extractive Metallurgy, 1(5) . pp. 64-69.

Biswas, D K and Choudhury, Arijit (2016) Pollution management with techno-economical evaluation for coke based and cokeless furnaces concerning melting and casting of brass and bell metal. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 201-211.

Chakraborty, A and Adhikary, M and Venugopalan, T and Nanda, T and Kumar, B R (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science and Engineering A-Structural Materials Properties Micro structure and Processing, 676 (IF-3.094). pp. 463-473.

Chalavadi, G and Singh, R K and Sharma, Mamta and Singh, Ratnakar and Das, Avimanyu (2016) Development of a Generalized Strategy for Dry Beneficiation of Fine Coal over a Vibrating Inclined Deck. International Journal of Coal Preparation and Utilization, 36(1) (IF-0.673). pp. 10-27.

Chalavadi, G and Singh, Ranjeet K and Das, Avimanyu (2016) Processing of coal fines using air fluidization in an air table. International Journal of Mineral Processing, 149 (IF- 1.561). pp. 9-17.

Chatterjee, Sandip and Kumari, Archana and Jha, Manis K (2016) Sustainable Recycling Technology for Electronic Waste. In: Sustainability in the mineral and energy sectors. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742 CRC Press, Boca Raton, pp. 189-204. ISBN 978-1-4987-3302-1

Chatterjee , Partha Pratim (2016) Recent developments in aerospace materials. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 53-56.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Iron Ore Slimes using Reagents. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 32-43.

Choudhury, A and Biswas, D K and Bose, S and Datta, T K (2016) Development of various modules of environment friendly furnaces concerning melting and castings of iron, brass and bell metal products. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 99-131.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.

Das, Arpan (2016) Contribution of deformation-induced martensite to fracture appearance of austenitic stainless steel. Materials Science and Technology, 32(13) (IF-1.180). pp. 1366-1373.

Das, Arpan (2016) Intervention of martensite variants on the spatial aspect of microvoids. Materials Research Express, 3(6) (IF-1.068).

Das, Arpan (2016) Spatial Martensite. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 658 (IF-3.094). pp. 484-489.

Das, T K and Banerjee, P and Mandal, S K (2016) Giant magnetoimpedance intrinsic impedance and voltage sensitivity of rapidly solidified Co66Fe2Cr4Si13B15 amorphous wire for highly sensitive sensors applications. Applied Physics A-Materials Science & Processing, 122(11) (IF-1.455).

Dasgupta, A and Randhawa, N S and Chandrashekhar, S and Goyal, RP (2016) Filtration studies for separation of solid particles from slurry generated in hydrometallurgical processing of ores and concentrates. Journal of Metallurgy and Materials Science, 58(2) (IF-0.04). pp. 69-79.

Datta, A K and Sivaprasad, S and Prasad, P (2016) System approach of modeling of high rise steel structures against earthquake excitations. Journal of Metallurgy and Materials Science, 58(1) (IF-0.04). pp. 25-33.

Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157.

Dey, Sushmita and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A and Panda, A K (2016) Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons. Journal of Magnetism and Magnetic Materials, 397 (IF-2.630). pp. 342-346.

Dey, Swapna and Chattoraj, I (2016) Interaction of strain rate and hydrogen input on the embrittlement of 7075 T6 Aluminum alloy. Materials Science and Engineering: A, 661 (IF-3.094). pp. 168-178.

Director, NML (2016) Annual Report 2015-2016. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2016) Director's Desk - Special RC Meeting of CSIR-NML (English Version). CSIR- National Metallurgical Laboratory, Jamshedpur.

Divya, M and Das, C R and Ghosh Chowdhury, S and Albert, S K and Bhaduri, A K (2016) Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 47A(7) (IF-1.874). pp. 3397-3411.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2016) Mechanical properties and durability of volcanic ash based geopolymer mortars. Construction and Building Materials, 124 (IF-3.169). pp. 606-614.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Advances, 6(45) (IF 3.169). pp. 39106-39117.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions. Journal Of Materials Science, 51(22) (IF-2.599). 10301-10317.

Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146.

Dutta, Deblina and Goel, Sudha and Hait, Jhumki and Jha, Manis K (2016) E-waste generation, management, utilization and recycling : A review. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 89-98.

Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.

Garai, Subhadra and Sinha, Arvind (2016) Three dimensional biphasic calcium phosphate nanocomposites for load bearing bioactive bone grafts. Materials Science and Engineering C, 59 (IF-4.164). pp. 375-383.

Gharami, Kalpataru and Patra, H R and Kumar, Manoj and Randhawa, N S (2016) Thermodynamic consideration and phase evolution during oxidation of tungsten-copper electrical contactor scraps. Russian Journal Of Non-Ferrous Metals, 57(4) (IF-0.238). pp. 361-366.

Gupta, R N and Das, A K and Nagahanumaiah, and Henal, S (2016) Pulse Electrocodeposited Ni–WC Composite Coating. Materials and Manufacturing Processes, 31(1) (IF-1.630). pp. 42-47.

Gupta, S K and Kumar, Sanjeev and Patwari, Anand Ganvir and Chatterjee, A and Ghosh, Somnath (2016) Control of sulphur and minimisation of centre line segregation for Rail Steel. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 243-250.

Harsh Raj, and Jha, S K and Paswan, Dayanand (2016) Optimization of Process Parameter for Smelting and Reduction of Ferrochrome. International Journal of Engineering Research & Technology, 5(10) .

Hazra, B and Varma, Atul K and Bandyopadhyay, A K and Chakravarty, S and Buragohain, J and Samad, S K and Prasad, A K (2016) FTIR, XRF, XRD and SEM characteristics of Permian shales, India. Journal of Natural Gas Science and Engineering, 32 (IF-2.718). pp. 239-255.

Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10.

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, J K and Singh, D D N (2016) Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars. ACI Materials Journal, 113(5) (IF-1.183). pp. 579-588.

Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Lee, J Y (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165 (IF-2.605). 2-26 .

Jha, Manis K and Kumari , Archana and Panda, Rekha and Jyothi , Rajesh Kumar and Yoo, Kyoungkeun and Lee, Jin-Young (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165/1 .

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Fayomi, O S I (2016) Comparative assessment of the degradation mechanism of micro-alloyed steel in E20 and E80 simulated fuel grade ethanol environments. Technologies and Materials for Renewable Energy, Environment and Sustainabilty: TMREES, 1758 (NON-SCI).

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654).

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Partial Replacement of Sand and Cement by Iron Ore Slime for Concrete Building Material. Recent Trends in Civil Engineering & Technology, 6(2) . pp. 37-42.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Waste Iron Ore Slime. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 1-7.

Khanduri, Prabhat Chandra and Upadhyay, T C (2016) Dependence of dielectric constant and loss tangent on electric field in antiferroelectric squaric acid crystal. Journal of Metallurgy and Materials Science, 58(4) (IF 0.04). pp. 213-220.

Kumar, K and Randhawa, N S and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2016) Studies on dissolution kinetics of dolime in electrothermal magnesium slag. Russian Journal of non-ferrous metals, 57(4) (IF-0.238). pp. 287-295.

Kumar, Sujeet and Djobo, Jean NoëlYankwa and Kumar, Anil and Kumar, Sanjay (2016) Geopolymerization behavior of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 (IF-1.055). pp. 172-178.

Kumar, Vinod (2016) Thermo-mechanical simulation using gleeble system - advantages and limitations. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 81-88.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2016) Solvent Extraction and Separation of Trivalent Lanthanides Using Cyphos IL 104, a Novel Phosphonium Ionic Liquid as Extractant. Solvent Extraction and Ion Exchange, 34(5) (IF- 2.456). pp. 469-484.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Panday, B D (2016) Investigation of a novel ionic liquid, Cyphos IL 104 for the solvent extraction of mineral acids. Hydrometallurgy, 165 (IF- 2.605). 159-165.

Kumari, Amrita and Das, Suchandan K and Srivastava, Prem Kumar (2016) Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks. Journal of The Institution of Engineers , 97(1) (IF- ). pp. 39-46.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Computational Investigation of the Influence of Fly Ash Silica Content and Shape on the Erosion Behaviour of Indian Coal Fired Boiler Grade Steels. Journal of The Institution of Engineers (India): Series C, 97(3) . pp. 375-380.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Feed Water Chemistry-Related Corrosion Failures in Subcritical 250 MW Coal-Fired Boiler. Journal of Failure Analysis and Prevention , 16(4) (IF- 0.469). pp. 703-711.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Modeling Fireside Corrosion Rate in a Coal Fired Boiler Using Adaptive Neural Network Formalism. Portugaliae Electrochimica Acta (IF-0.960).

Kumari, Anjan and Jha, Manis K and Lee, Jae-chun and Singh, Rajendra Prasad (2016) Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs. Journal of Cleaner Production, 112( 5) (IF-3.844). pp. 4826-4834.

Kumari, Anjan and Jha, Manis K and Singh, R P (2016) Recovery of metals from pyrolysed PCBs by hydrometallurgical techniques. Hydrometallurgy, 165 (IF- 2.605). 97 -105 .

Kumari, Anjan and singh, R P and Jha, Manis K and Kumar, Vinay (2016) Extraction of copper from small electronic devices populated on discarded PCBs. In: Education in Chemical Science and Technology. Indian Chemical Society, Kolkata, pp. 81-91.

Kumari, Anju and Singh, Ravinder and Goswami, N G (2016) Seasonal variation of heavy metals in Subarnarekha River at Jamshedpur, East Singhbhum, Jharkhand. Journal of Metallurgy and Materials Science, 58(3) (IF- 0.04). pp. 159-166.

Kundu, Sayandeep and Maladkar, R and Singh, Ak and Hussain, M M (2016) Role of precipitate in strain induced martensitic transformation during cold deformation of SS 321. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 35-46.

Madge, S V and Louzguine, D V and Kawashima, A and Greer , A L and Inoue, A (2016) Compressive plasticity of a La-based glass-crystal composite at cryogenic temperatures. Material & Design, 101 (IF- 4.364). pp. 146-151.

Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Maity, S K and Rajak, A K and Shekhar, M Chander and Singh, S D (2016) Development of Ultra High Strength Steel by Electroslag Refining and Thermomechanical Treatment. Transations of the Indian Institute Metals, 69(3) (IF- 0.533). pp. 705-716.

Makhija, Dilip and Rath, R K and Chakravarty, K and Patra, AS and Mukherjee, A K and Dubey, A K (2016) Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag. International Journal of Minerals Metallurgy and Materials, 23(7) (IF-0.943). pp. 751-759.

Mandal, Anup and Guguloth, K and Bandyopadhyay, T K (2016) Characterization of Microstructure and Mechanical Properties of 9.2Cr0.45V0.7C Heat-Resistant Steel. Metallography, Microstructure, and Analysis, 5(2) (IF-0.58). pp. 95-107.

Mehrotra, S P and Alex, T C and greifzu, G and Kumar, Rakesh (2016) Mechanical Activation of Gibbsite and Boehmite: New Findings and their Implications. Transactions of the indian institute of metals, 69(1) (IF-0.533). pp. 51-59.

Mehta, M I and Kashyap, B P and Singh, R K P (2016) Study on flow properties of rotor grade steel. Journal of Metallurgy and Materials Science, 58(4) (IF- 0.04). pp. 221-229.

Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.

Meshram, Pratima and Abhilash, and Kumari, Jyotsna and Pandey, B D (2016) Extraction of vanadium and synthesis of vanadium pentaoxide from Bayer's sludge. Russian Journal Of Non-Ferrous Materials, 57(4) (IF-0.238). pp. 338-346.

Meshram, Pratima and Abhilash, and Panday, B D and Mankhand, T R and Deveci, Haci (2016) Acid baking of spent lithium ion batteries for selective recovery of major metals: A two-step process. Journal of Industrial and Engineering Chemistry, 43 (IF- 4.421). pp. 117-126.

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2016) Comparision of Different Reductants in Leaching of Spent Lithium Ion Batteries. Journals of Metals, 68(10) (IF-1.860). pp. 2613-2623.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.

Meshram, R B and Kundu, G and Mukherjee, D (2016) Heat Transfer Studies in Ejector-induced Downflow Bubble Column. International Journal of Chemical Reactor Engineering, 1(5) (IF-0.623). pp. 955-964.

Metya, Avijit and Munda, Parikshit and Rajnikanth, V and Roy, Rajat (2016) Failure Analysis of SA213-T22 Re-heater Rear Tube of Thermal Power Plant. Transactions of the Indian Institute of Metals, 69(2) (IF-0.533). pp. 665-668.

Mishra, Suman K and Sherbakov, V A (2016) In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties. International Journal Of Refractory Metals & Hard Materials, 59 (IF- 2.155). 19-25.

Mishra, Suman K and Kumar, V and Tiwari, S K and Mishra, T and Angula, G and Adhikari, S (2016) Development and degradation behavior of protective multilayer coatings for aluminum reflectors for solar thermal applications. Thin Solid Films, 619 (IF- 1.879). pp. 202-207.

Mishra, Suman K and N, Jagdeesh and Pathak, L C (2016) Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process. Journal Of Materials Engineering And Performance, 25(7) (IF-1.331). pp. 2570-2575.

Mishra, T and Mahato, D K (2016) A comparative study on enhanced arsenic(V) and arsenic(III) removal by iron oxide and manganese oxide pillared clays from ground water. Journal of Environmental Chemical Engineering, 4 (IF-1.355). pp. 1224-1230.

Mishra, V and Bhoumik, T and Chakravarty, S and Verma, A K and Sharma, Mamta (2016) Influence of coal quality on combustion behaviour and mineral phases transformations. Fuel, 186 (IF- 4.601). 443-455.

Mishra, V and Sharma, Mamta and Chakravarty, S and Banerjee, A (2016) Changes in organic structure and mineral phases transformation of coal during heat treatment on laboratory scale. International Journal of Coal Science & Technology, 3(4) (IF-0.640). pp. 418-428.

Mondal, S and Mohanasundaram, M and Sau, D C and Gupta, R K and Kumar, Manoj and Paul, K K and Sirshendu, Dey (2016) Modeling heat transfer of the electrothermal reactor for magnesium production. International Journal of Thermal Sciences, 102 (IF-3.615). pp. 274-284.

Mukherjee, K and Matlock, DK (2016) Simulation of bar rolling in gleeble. Journal of Metallurgy and Materials Science, 51(1) (IF- 0.04). pp. 65-68.

Munda, Parikshit and Das, Swapan K (2016) Failure analysis of an aeroengine compressor blade: A case study. IIM Metal News, 19(3) (NON-SCI). pp. 17-19.

Munda, Parikshit and Kumar, S and Prakash, Amit and Husain, M M and Rajnikanth, V and Ghosh Chowdhury, S (2016) Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station. Journal of Failure Analysis and Prevention, 16(1) (IF 0.469). pp. 9-18.

Murthy, G V S and Patel, D and Sahoo, K L (2016) A study of precipitation behaviour of A356 alloy using ultrasonic velocity measurements. Insight - Non-Destructive Testing and Condition Monitoring, 58 (IF-0.527). pp. 367-372.

Nanda, T and Ravi Kumar, B and Bhinder, J (2016) Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, 31(8) (IF 2.274). pp. 995-1003.

Nanda, T and Ravi Kumar, B and Singh, V (2016) A Thermal Cycling Route for Processing Nano-grains in AISI 316L Stainless Steel for Improved Tensile Deformation Behaviour. Defence Science Journal, 66(5) (IF-0.500). pp. 529-535.

Nath, S K and Kumar, Sanjay (2016) Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement. Construction and Building Materials, 125 (IF-3.169). pp. 127-134.

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.

Noor, Aman and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal Of Environmental Chemical Engineering, 4(1) (IF-1.355). pp. 191-196.

Ogundiran, M B and Kumar, Sanjay (2016) Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics. Construction and Building Materials, 125 (IF-3.169). pp. 450-457.

Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.

Pal, Partha Pratim and Mohan, Devendra and Dhoble, Yogesh and Bhattacharjee, S (2016) Adsorption of Cu(II) and Cr(III) by iron powder in aqueous medium. Journal of Metallurgy and Materials Science, 58(1) . pp. 1-8.

Panda, A K and James, Ajil P and Mohan, Aneesh and Dey, Sushmita and Roy, Rajat K and Mitra, A (2016) Investigation on Transverse Defect and Cavitation Depth in Ferrous Pipe Using Melt Spun FeSiB Ribbon as Magnetostrictive Sensing Element. NDT & E International, 80 (IF-2.726). pp. 15-22.

Panda, Rekha and Jha, Manis K and Hait, Jhumki and Kumar, G and Singh, R J and Yoo, Kyoungkeun (2016) Extraction of lanthanum and neodymium from leach liquor containing rare earth metals (REMs). Hydrometallurgy, 165 (IF- 2.605). pp. 106-110.

Panda, Rekha and Kumari, Archana and Hait, Jhumki and Jha, Manis K (2016) Extraction and separation of zinc and chromium from electroplating effluent. Journal of Metallurgy and Materials Science , 58(4) (IF- 0.04). pp. 181-190.

Pandya, Achal and Singh, J K (2016) Transformation of chloride contaminated unstable rusts on weathering and plain carbon steels into stable forms by treatment with extract of fruit juice of Indian gooseberry (Amla). Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 47-52.

Parmar, Kavita and Bhattacharjee, S (2016) Adsorption of Zn(II) ions on Calcium Silicate Precipitation Tube (CaSPT) produced through 'silica garden' route. Hydrometallurgy, 165 (IF- 2.605). pp. 137-142.

Paswan, Dayanand (2016) An over view on testing of Raw materials. National Workshop on Experimental techniques in extractive metallurgy (ETEM-2016) . pp. 83-92.

Pathak, Prashant and Karani, Arnab and Shome, M (2016) Development of HSLA steel with high temperature tensile properties. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 57-64.

Paul, Surajit Kumar (2016) Prediction of complete forming limit diagram from tensile properties of various steel sheets by a nonlinear regression based approach. Journal of Manufacturing Processes, 23 (IF- 2.322). pp. 192-200.

Pradip, and Beena, R and Kumar, Rakesh and Srikanth, S (2016) Preface. Transactions of the indian institute of metals, 68(1) (IF-0.533). pp. 1-2.

Pramanick, Ajit Kumar and Das, H and Reddy, G M and Ghosh, M and Das, Goutam and Nandy, S and Pal, T K (2016) Development and design of microstructure based coated electrode for ballistic performance of shielded metal arc welded armour steel joints. Materials & Design, 103 (IF 4.364). pp. 52-62.

Pramanik, S and Sinha, Manish K and Kumari, Aarti and Jha, Manis K and Sahu, S K (2016) Recovery of Rare Earth Oxide from Phosphor Powder of Spent Fluorescent Lamp. In: Hydrometallurgy Conference 2016: Sustainable Hydrometallurgical Extraction of Metals, 1–3 August 2016, Cape Town, South Africa.

Rajnikanth, V and Munda, Parikshit and Kumar, Tipu and Ghosh Chowdhury, S and Sangal, Sandeep (2016) Effect of thermomechanical processing schedule on the texture and microstructure of pipeline grade API X80 microalloyed steel. 4 th International conference on Thermomechanical Simulation and Processing of Steels, SIMPRO 2016, 4 (NON-SCI). pp. 231-239.

Rajshekhar, Y and Alex, T C and Sahoo, D P and Babu, G A and Balakrishnan, V and Venugopalan, T and Kumar, Sanjay (2016) Iron ore slime as an alternate coolant in steelmaking: Performance evaluation at commercial scale. Journal Of Cleaner Production, 139 (IF- 5.715). pp. 886-893.

Raju, G B and Ratchambhigai, S and Rao, M A and Vasumathi, N and Kumar, TVV and Prabhakar, S and Rao, S Subba (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the Indian Institute of Metals, 69(1) (IF-0.533). pp. 75-81.

Randhawa, N S and Gharami, Kalpataru and Kumar, Manoj (2016) Leaching kinetics of spent nickel-cadmium battery in sulphuric acid. Hydrometallurgy, 165 (IF- 2.605). pp. 191-198.

Randhawa, N S and Hait, Jhumki and Jana, R K (2016) A brief overview on manganese nodules processing signifying the detail in the Indian context highlighting the international scenario. Hydrometallurgy, 165 (IF- 2.605). pp. 166-181.

Randhawa, N S and Kumar, Manoj and Kumar, Hemant and Prasad, Sanjay (2016) Enhancing titania value of a weathered ilmenite by reduction roasting - acid leaching. National coference on non-ferrous minerals & materials- 2016 . pp. 30-34.

Randhawa, N S and Sau, D C and Kumar, Manoj (2016) Direct electrolytic refining of end-of-life industrial copper waste scraps for production of high purity copper powder. Russian journal of non-ferrous metals, 57(4) (IF-0.204). pp. 367-373.

Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.

Rath, R K and Mohanta, M K and Singh, Ratnakar (2016) Feasibility of producing sinter fines from a low grade and fine grained hematite-goethitic ore. In: International Conference on MPT-2016, January, 2016, Pune.

Ray, Ashok K and Roy, Nilima and Raj, A and Roy, B N (2016) Structural integrity of service exposed primary reformer tube in a petrochemical industry. International Journal of Pressure Vessels and Piping, 137 (IF-1.28). pp. 46-57.

Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML.

Reddy, G and Sahoo, K L and Ganguly, R I and Dash, R R and Rao, P S P and Reddy, G S (2016) Cast and age hardening behaviour of Al6061 alloy reinforced with an in-situ ceramic composite prepared by carbo thermal reduction of fly ash in plasma reactor. Journal Of Composite Materials, 50(22) (IF-1.494). pp. 3027-3041.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2016) Effect of Co content on structure and magnetic behaviors of high induction Fe-based amorphous alloys. Journal Of Magnetism And Magnetic Materials, 418 (IF- 2.630). 236-241.

Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2016) Study of cut point density and process performance of floatex density separator in fine coal cleaning. Particulate Science and Technology (IF-0.52). pp. 1-8.

Saha, D and Chakravarty, S and Shome, D and Basariya, M R and Kumari, A and Kundu, AK and Chaterjee, D and Adhikari, J and Chaterjee, D (2016) Distribution and affinity of trace elements in Samaleswari coal, Eastern India. Fuel, 181 (IF-4.601). 376-388.

Sahoo, Gadadhar and Kumar, Vinod and Singh, Balbir and Sexena, Atul (2016) Hot ductility study on high P and Cu containing low alloy steel. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 153-158.

Santosh, R and Das, Swapan K and Das, Goutam and Korody, J and Kumar, S and Singh, P K and Ghosh, M (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions A, 47A(7) (IF-1.874). pp. 3511-3521.

Santosh, R and Singh, P K and Das, Goutam and Korody, J and Das, S K and Kumar, S and Ghosh, M (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47(9) (IF-0.524). pp. 845-851.

Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.

Sen, S and Chakraborty, N and Rana, P and Sahu, Ranjan K and Singh, S and Panda, A K and Tripathy, S and Pradhan, D K and Sen, A (2016) Effect of Ti doping on the structural, electrical and magnetic properties of GaFeO3. Journal of Materials Science: Materials in Electronics, 27(5) (IF-2.019). pp. 4647-4652.

Shaik, A A and Kashyap, B P and Chauthai, A (2016) Identification of favorable hot working condition for Ti-6 Al-4V. Journal of Metallurgy and Materials Science, 58(1) . pp. 9-18.

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Shashikala, A R and Shridhar, V S (2016) Corrosion studies of electroless chomium based coatings. Journal of Metallurgy and Materials Science, 58(1) . pp. 19-24.

Sheikh, Lubna and Tripathy, S and Nayar, S (2016) Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery. Rsc Advance, 6(67) (IF-3.108). pp. 62556-62571.

Shekhar, S and Singh, R K and Chalavadi, G (2016) Study of Process Efficiency for High-Ash Fine Coal Cleaning in a Kelsey Centrifugal Jig. International Journal of Coal Preparation and Utilization (IF-0.673). pp. 1-10.

Shi, D and Bhattacharya, S and Nayar, S and Webster, T J (2016) Optimizing superparamagnetic iron oxide nanoparticles as drug carriers using an in vitro blood-brain barrier model. International Journal Of Nanomedicine, 11 (IF- 4.3).

Singh, C B and Gupta, R N and Vaish, A K and Roy, B N (2016) Effect of scale-up, design and process parameters on the productivity of ancient iron making process and recovery of iron in the product. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 191-199.

Singh, R and Tiwari, S K (2016) Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels. Lasers in Engineering, 35(1-4) (IF-0.214). pp. 63-74.

Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279.

Singh, Rajesh Kumar (2016) Corrosion protection of transport vehicles by nanocoating of decahydrobenzxo[8] annulene-5, 10 dihyrazone and SiC filter in H O O (moist), CO , 2 3 2 2 SO environments and weather change. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 167-179.

Singh, Ranapratap and Pawar, Puneet (2016) Optimization and crashworthiness investigation of empty and aluminium foam filled square tubes. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 231-241.

Singh, S and Nanda, T and Ravi Kumar, B and Singh, V (2016) Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel. Materials and Manufacturing Processes, 31(15) (IF-2.274). pp. 2064-2075.

Singh, S and Sribalaji, M and Wasekar, N P and Joshii, H and Sundararajan, G and Singh, Raghuvir and Keshri , A K (2016) Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings. Applied Surface Science, 364 (IF-3.387 ). pp. 264-272.

Singh, V and Das, Suchandan K (2016) Thermo-fluid Mathematical Modeling of Steel Slab Caster: Progress in 21st Century. Isij International, 56(9) (IF-1.11). pp. 1509-1518.

Sinha, Manish K and Sahu, S K and Pramanik, S and Prasad , L B and Panday, B D (2016) Recovery of high value copper and zinc oxide powder from waste brass pickle liquor by solvent extraction. Hydrometallurgy, 165 Part 1 (IF-2.605). 182-190.

Sinha, Manish K and Pramanik, Swati and Sahu, S K and Prasad, L B and Jha, Manis K and Pandey, B D (2016) Development of an efficient process for the recovery of zinc and iron as value added products from the waste chloride solution. Separation and Purification Technology, 167 (IF-3.359). pp. 37-44.

Sinha, Shivendra and Abhilash, and Meshram, Pratima and Pandey, B D (2016) Metallurgical processes for the recovery and recycling of lanthanum from various resources—A review. Hydrometallurgy, 160 (IF-2.605). pp. 47-59.

Srikanth, S and Laxmi Devi, V and Kumar, Rakesh (2016) Unfolding the complexities of mechanical activation assisted alkali leaching of zircon (ZrSiO4). Hydrometallurgy, 165(1) (IF-2.605). pp. 125-136.

Tammishetti, V and Rai, B and Ravi Kumar, B and Kumar, Rakesh and Pradip, (2016) Quantitative Estimation of Mineral Phases from Chemical Assays and Powder X-Ray Diffraction Rietveld Analysis: A Case Study on Selective Flocculation of Iron Ore Slimes. Transaction of the Indian Institute Metals, 69(1) (IF-0.533). pp. 125-133.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Y L and Tsibina, O V and Yakubailik, E K and Abhilash, (2016) Ferritization of industrial waste water and microbial synthesis of iron-based magnetic nanomaterials from sediments. Environmental Progress & Sustainable Energy, 35(5) (IF-1.672). pp. 1407-1414.

Vasumathi, N and Ananda Rao, M and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Feasibility studies on Talc beneficiation by flotation. In: 15th International Seminar on Mineral Processing Technology. Springer, held at Pune.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Beneficiation of an Indian non-coking coal by column flotation. International Journal of Coal Science & Technology, 3(2) (IF- 0.640). pp. 206-214.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2016) Removal of lead from waste material containing carbon. In: 20th National Conference on Non-ferrous minerals and metals, 8-9 July 2016, Jamshedpur.

Vidyadhar, A (2016) A Review of Technology of Metal Recovery from Electronic Waste. In: E-Waste in Transition - From Pollution to Resource. InTech, Croatia, pp. 121-158. ISBN ISBN 978-953-51-2500-6

Yoo, Kyoungkeun and Lee, Kwang Seok and Jha, Manis K and Lee, Jae-chun and Cho, Kuk (2016) Preparation of Nano-Sized Tin Oxide Powder from Waste Pb-Free Solder by Direct Nitric Acid Leaching. Journal of Nano-science and Nanotechnology, 16 (IF-1.483). pp. 11238-11241.

This list was generated on Wed Mar 27 21:22:02 2024 IST.