Items where Subject is "Materials Science > Polymer Composites"
Group by: Creators | Item Type Number of items at this level: 22.
GGhosh, Rachit and Gupta, S K and Kumar, A and Kumar, S (2019) Durability and Mechanical Behavior of Fly Ash-GGBFS Geopolymer Concrete Utilizing Bottom Ash as Fine Aggregate. Journal Transactions of the Indian Ceramic Society, 78(1) . pp. 24-33. Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Leaching and efflorescence effects in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(2) . pp. 79-88. Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Replacement of conventional fine aggregate with bottom ash in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(3) . pp. 173-187. KKumar, Rakesh and Kumar, Sanjay and Alex, T C and Singla, Rashmi (2019) Mapping of calorimetric response for the geopolymerisation of mechanically activated fly ash. Journal of Thermal Analysis and Calorimetry, 136(3) . pp. 1117-1133. Kumar, Sunil and Pattanayek, S K (2019) Effect of Multiaxial Tensile Deformation on the Mechanical Properties of Semiflexible Polymeric Samples. The Journal of Physical Chemistry B, 123(43) . pp. 9238-9249. Kumar, Sunil and Pattanayek, S K (2019) Force induced removal of an encapsulated semi-flexible polymer from single walled carbon nanotube. The Journal of Chemical Physics, 516 . pp. 22-27. MMohanty, Ashok and Tiwari, S K and Mishra, T and Chakravarty, S (2012) Making the Glitter Last – Development of A Novel Lacquer for Copper Based Alloys. Science & Culture, 78 (11-12) . pp. 550-552. NNana, Achile and Singla, Rashmi and Epey, Noela and Kassem, N N and Sakue, E N and Rodrigue, C K and Kamseu, E and Kumar, Sanjay and Leonelli, C (2023) Design and characterization of Cameroonian pegmatite-calcined clay binary mortars via geopolymerisation. Journal of Building Engineering, 76 . Nana, Achile and Tchummegne, I K and Tome, Sylvain and Adesina, A and Alomayri, T and Singla, Rashmi and Kaze, R C and Kamseu, E and Kumar, Sanjay and Leonelli, C (2024) Comparison of feldspar and meta-halloysite geopolymers by alkaline and acidic activation. Construction and Building Materials, 424 . Nath, S K and Kumar, Sanjay (2019) Reaction kinetics of fly ash geopolymerization: Role of particle size controlled by using ball mill. Advanced Powder Technology, 30(5) . pp. 1079-1088. Nath, S K and Kumar, Sanjay (2019) Role of alkali concentration on reaction kinetics of fly ash geopolymerization. Journal of Non- Crystalline Solids, 505 . pp. 241-251. Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Das, Goutam and Ravi Kumar, B and Sinha, Arvind (2008) Biomimetically synthesized polymer-hydroxyapatite sheet like nano-composite. Journal of Materials Science: Materials in Medicine, 19 (1). pp. 301-304. PPolimera, Srihith and Gali , A and Nath, Susanta Kumar and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J (2023) Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler. Polymer Composites, 44(10) . pp. 6454-6466. Polimera, Srihith and Gali , A and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J and Nath, Susanta Kumar (2023) Thermo-mechanical property enhancement of rigid polyurethane foam composite using low-cost, environment-friendly fly ash over silica particles. Journal of Vinyl and Additive Technology, 30(1) . pp. 156-171. SSarkar, A N and Kumari, Soni and Jagadevan, S and Panda, Asit Baran and Pal, Sagar (2022) Simultaneous in Situ Exfoliation of Titanate and Zn-Cr Layered Double Hydroxides with a Copolymer for Photocatalytic Degradation of Organic Pollutants. ACS Applied Polymer Materials . Sarkar, C and Sahu, Sumant Kumar and Sinha, Arvind and Chakraborty, J and Garai, Subhadra (2019) Facile synthesis of carbon fiber reinforced polymer-hydroxyapatite ternary composite: A mechanically strong bioactive bone graft. Materials Science and Engineering: C , 97 . pp. 388-396. Sayari, F and Ben, Mansour N and Krani, M and Wederni, M A and Hijiri, M and Aouaini, F and Sharma, A and El, Mir L (2024) Investigation into the Characteristics of Nanoporous Carbon/Silica-Nickel Nanocomposite for high-frequency Applications. Journal of Inorganic and Organometallic Polymers and Materials . Siddique, A B and Morrison, K and Venkata, G and Pramanick, A K and Banerjee, N and Ray, M (2021) Charge Transport through Functionalized Graphene Quantum Dots Embedded in a Polyaniline Matrix. ACS Applied Electronic Materials, 3(3) . pp. 1437-1446. Sinha, Arvind and Nayar, S and Kar, Abhijit and Gunjan, M K and Mahato, B and Das, Goutam and Kumar, Arun and Chabra, Aman (2008) Microhydrogel-Mediated Synthesis of Sintered Hydroxyapatite Granules. International Journal of Applied Ceramic Technology, 5 (5). pp. 458-463. Szabo, R and Kristaly, Ferenc and Nagy, S and Singla, Rashmi and Mucsi, Gabor and Kumar, Sanjay (2023) Reaction, structure and properties of eco-friendly geopolymer cement derived from mechanically activated pumice. Ceramics International, 49(4) . pp. 6756-6763. TTripaliya, S S and Gupta, M K and Sahu, Rina and Pappu, A and Sharma, C and Chaturvedi, A K and Srivastava, A K (2020) Tuning surface resistivity and thermal conductivity of water resistant fly ash waste based polymer composite via tailoring the interfacial polarization. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 71-80. |