Items where Division is "Material Science and Technology" and Year is 2021

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: Article | Thesis
Number of items: 81.

Article

Adeleke, A A and Odusote, J K and Ikubanni, P P and Orthadahwe, T A and Lasode, O A and Ammasi, A and Kumar, K (2021) Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports (IF-3.99).

Akcil, Ata and Ibrahim, Y A and Meshram, Pratima and Panda, S and Abhilash, (2021) Hydrometallurgical recycling strategies for recovery of rare earth elements from consumer electronic scraps: a review. Journal of Chemical Technology & Biotechnology .

Akhtar, Mohammad Nishat and Khan, Muneer and Khan, Sher Afghan and Afzal, Asif and Subbiah, Ram and Ahmad, Sheikh Nazir and Husain, M M and Butt, Mohammad Mursaleen and Othman, Abdul Rahim and Bakar, Elmi Abu (2021) Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials, 14(10) . p. 2639.

Al-Negheimish, Abdulaziz and Hussain, R R and Alhozaimy, Abdulrahman (2021) Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. Construction and Building Materials, 274 . p. 121921.

Alex, T C and Mucsi, G and Venugopalan, T and Kumar, Sanjay (2021) BOF Steel Slag: Critical Assessment and Integrated Approach for Utilization. Journal of Sustainable Metallurgy .

Bagui, S and Sahu, B P and Laha, K and Tarafder, Soumitra and Mitra, R (2021) Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 degrees C to 800 degrees C. Metallurgical and materials transactions A-physical metallurgy and materials science, 52(1) . pp. 94-107.

Banerjee, Riya and Mohanty, A and Chakravarty, S and Chakladar, S and Biswas, P (2021) A single-step process to leach out rare earth elements from coal ash using organic carboxylic acids. Hydrometallurgy, 201 .

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Ghosh, C and Rajinikanth, V and Ghosh Chowdhury, S (2021) Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Low-Si Steel After Quenching and Nonisothermal Partitioning. Transactions of the Indian Institute of Metals .

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Bhuyan, P and Pradhan, S K and Mitra, R and Mandal, S (2021) Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617. Materials Characterization, 178 .

Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International .

Chakraborty, J (2021) Lattice expansion and phase stability in nanocrystalline titanium thin films. Philosophical Magazine Letters, 101(8) . pp. 330-340.

Chakraborty, J and Harzer, T P and Duarte, Maria J and Dehm, G (2021) Phase decomposition in nanocrystalline Cr0.8Cu0.2 thin films. Journal of Alloys and Compounds, 888 .

Chalavadi, G and Singh, R K (2021) Feasibility study of iron ore fines beneficiation by shallow bed air fluidized separator. Particulate science and technology, 39(4) (IF-1.619). pp. 391-400.

Chandan, A K and Hung, P T and Kishore, K and Kawasaki, M and Chakraborty, J and Gubicza, Jeno (2021) On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing. Materials Characterization, 178 .

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Chandan, A K and Tripathy, S and Sen, B and Ghosh, M and Ghosh Chowdhury, S (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia, 199 (IF-5.079). p. 113891.

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Das, A and Kumar, B and Ahmad, Sheikh Nazir and Paul, S K and Mandal, G K (2021) Formability study of bake hardening steel and its correlation with microstructure. Proceedings of the Institute of Mechanical Engineers Part B-Journal of Engineering Manufacture .

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance .

Dutta, A and Shivaji, T and Ghosh, M and Fernandes, R and De, P K and Nayak, D and Sharma, R (2021) Corrosion behavior of AlCuFeMn alloy in aqueous sodium chloride solution. Materials Chemistry & Physics . (In Press)

Dutta, Chandan and Kumar, J and Das, T K and Sagar, S P (2021) Recent Advancements in the Development of Sensors for the Structural Health Monitoring (SHM) at High-Temperature Environment: A Review. IEEE Sensors Journal, 21(14) . pp. 15904-15916.

Guguloth, K and Fernando, D.C and Paulose, N and Sahu, J K (2021) Evolution of microstructure during tensile creep deformation of nickel-based disk superalloy. International Journal of Pressure Vessels and Piping, 194 Part A .

Husain, M M and Meena, L K and Ghosh, M and Prabhu, N (2021) Corrosion at the Weld Nugget of the Friction-Stir-Welded Medium Strength Steel: Effect of Microstructure. Metallurgical and Materials Transactions A .

Jena, P S M and Pradhan, S K and Tripathy, S and Mahato, B and Fernando, C and Paulose, N and Sahu, J K (2021) Evolution of geometrically necessary dislocation at the gamma-gamma ' interface and its effect on tensile deformation behaviour of disk super alloy. Materials Science & Engineering A-Structural materials properties microstructure & processing, 807 .

Kadgaye, Chetan and Hasan, Sk Md and Patra, Sudipta and Ghosh, M and Nath, S K and Karmakar, Anish (2021) Role of Cerium on Transformation Kinetics and Mechanical Properties of Low Carbon Steels. Metallurgical and Materials Transactions A, Online . pp. 1-18.

Kar, J and Guguloth, K (2021) Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel. Metals and Materials International .

Karar, D and Chatterjee, S and Pramanick, A K and Bandyopadhyay, N R and Ray, Mallar (2021) Electrical transport through pelletized tablet of silicene like quasi 2D crystalline silicon. Materials Letters, 303 .

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161 .

Khajuria, A and Akhtar, M and Bedi, R (2021) A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep. Journal of Strain Analysis for Engineering Design .

Kishore, Kaushal and Kumar, R Gaurav and Chandan, A K (2021) Critical assessment of the strain-rate dependent work hardening behaviour of AISI 304 stainless steel. Materials Science and Engineering A, 803 . p. 140675.

Kumar, C and Jena, P S M and Singh, R K and Harmain, G A and Sahu, J K (2021) Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H. International Journal of Pressure Vessels and Piping, 194 Part B .

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A .

Kumar, Suranjit and Kale, Rahul P and Singh, Pawan K and Ghosh, M and Chattopadhyay, J (2021) Fracture toughness behavior of dissimilar metal (SA508 Gr.3 Class 1 and SA312 Type 304LN) weld joint: With and without stress relieving treatment. Fatigue & Fracture of Engineering Materials and Structures, online .

Kumar, U and Das Chakraborty, S and Sahu, Ranjan K and Bhattacharya, P and Mishra, T (2021) Improved Interfacial Charge Transfer on Noble Metal-Free Biomimetic CdS-Based Tertiary Heterostructure @ 2D MoS2-CdS-Cu2O with Enhanced Photocatalytic Water Splitting. Advanced Materials Interfaces .

Kumari, A and Tripathy, A and Mandre, N R (2021) Artificial neural network-based sensitivity analysis and experimental investigation of liquid-solid fluidization technique for low-grade coal upgradation. Journal of Dispersion Science and Technology .

Kumari, A and Tripathy, A and Mandre, N R (2021) Multi-response and Misplacement Optimization of Upgrading BMQ Ore in Liquid-Solid Fluidized Bed Separator Using Taguchi-based Grey Relational Analysis. Journal of Sustainable Metallurgy, 7(3) . pp. 1200-1223.

Kumari, A and Tripathy, A and Rayasam, V (2021) Performance characterization and misplacement studies of liquid-solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science and Technology, 39(4) . pp. 436-448.

Kumari, Aarti and Raj, R and Randhawa, N S and Sahu, S K (2021) Energy efficient process for recovery of rare earths from spent NdFeB magnet by chlorination roasting and water leaching. Hydrometallurgy, 201 .

Lee, Jae-chun and Jha, Manis K and Panda, Rekha and Choubey, Pankaj K and Kumari, Archana and Kim, T G (2021) Developing Feasible Processes for the Total Recycling of WEEE to Recover Rare Metals. Rare Metals Technology . pp. 197-209.

Mahato, P and Banerjee, P and Murmu, Manilal and Hirani, Harish and Murmu, N C and Mishra, Suman K (2021) Investigation on Multifunctional Properties of Sputtered Ti-Si-B-C Coating with Varied Thickness over Targeted Surface. Journal of Materials Engineering and performance .

Mishra, A and Dubey, Paritosh and Chandra, R and Srivastava, S K (2021) Observation of large exchange bias field in Mn rich NiMnAl Heusler alloy thin film. Journal of Magnetism and Magnetic Materials, 532 .

Mishra, G and Chandan, A K (2021) Effect of cold deformation extent and ART annealing duration on the microstructure and mechanical properties of a medium manganese steel. Materials Chemistry and Physics, 271 .

Mohanty, Ashok and Kumar, S and Tiwari, S K (2021) Assessment of N-(4H-1,2,4-triazol-4-yl)octanamide as hydrochloric acid corrosion inhibitor for mild steel. Materials Today Communications, 27 .

Murugaiyan, Premkumar and Mitra, A and Jena, S M and Mahato, B and Ghosh, M and Roy, Rajat K and Panda, A K (2021) Grain refinement in Fe-rich FeSiB(P)NbCu nanocomposite alloys through P compositional modulation. Materials Letters, 295 (IF-3.204). p. 129852.

Nanda, T and Singh, V and Singh, G and Singh, M and Kumar, B R (2021) Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications. Archives of civil and mechanical engineering, 21(1) .

Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, Devendra Deo (2021) Developed Commercial Processes to Recover Au, Ag, Pt, and Pd from E-waste. Rare Earth Technology . pp. 115-126.

Pereira, A R M and Hacha, R R and Torem, M L and Merma, A G and Silvas, F P C and Abhilash, (2021) Direct hematite flotation from an iron ore tailing using an innovative biosurfactant. Separation Science and Technology .

Poddar, D and Ravi Kumar, B (2021) Effect of thermo-elasto-plastic strain on the mechanism of twin-free microstructure formation in the stainless steel. Materials Characterization, 171 . p. 110742.

Pradhan, S K and Bhuyan, P and Bairi, L R and Mandal, S (2021) Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel. Corrosion Science, 180 . p. 109187.

Rai, R K and Sahu, J K and Paulose, N and Fernando, D.C (2021) Tensile deformation micro-mechanisms of a polycrystalline nickel base superalloy: From jerky flow to softening. Materials Science and Engineering A, 807 .

Rajnikanth, V and Soni, M K and Mahato, B and Rao, M Ananda (2021) Microstructural investigation of rolling contact fatigue (RCF) on a failed planetary gear of a windmill gearbox. Engineering Failure Analysis, 121 .

Rajpurohit, R S and Jena, P S M and Kumar, Shivam and Sahu, J K (2021) Asymmetric cyclic loading behavior of micro-alloyed 2.25 Cr–Mo steel at room temperature. International Journal of Pressure Vessels and Piping, 191 (IF-2.230). p. 104369.

Rao, G S and Yagodzinskyy, Y and Que, Z and Spatig, P and Seifert, H-P (2021) Study on hydrogen embrittlement and dynamic strain ageing on low-alloy reactor pressure vessel steels. Journal of Nuclear Materials, 556 .

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurries of Indian coals using carboxymethylcellulose as dispersant- a comparative study. International Journal of Coal Preparation and Utilization, 41(10) . pp. 728-738.

Rao, M Ananda and Kumar, M V Pavan and Rao, S Subba and Narasaiah, N (2021) Rheological behavior of coal-water slurry using sodium tripolyphosphate as a dispersant. International Journal of Coal Preparation and Utilization, 41(6) . pp. 385-397.

Saha, S and Ghosh, M and Pramanick, A K and Mondal, C and Maity, J (2021) Attainment of high specific hardness and specific modulus in spark plasma sintered aluminium-copper-silicon carbide-titanium carbide hybrid compositeHohe spezifische Harte und spezifisches Schubmodul von einem sparkplasmagesinterten Aluminium-Kupfer-Siliziumkarbid-Titankarbid-Verbundwerkstoff. Materialwissenschaft und Werkstofftechnik, 52(9) . pp. 965-981.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Sahoo, Biraj K and Srivastava, V C and Mahato, B and Ghosh Chowdhury, S (2021) Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing. Materials Science and Engineering A, 799 (IF-). p. 140100.

Sahoo, M and Dey, Shobhana (2021) A comparative study on the characterisation and combustion behaviour of high ash coals from two different geographical origins. Fuel, 286(2) (IF-5.578).

Sahoo, T and Thakur, D and Panda, A B and Ghosh, S C (2021) Copper/manganese oxide catalyzed regioselective amination of quinoline N-oxides: An example of synergistic cooperative catalysis. Tetrahedron Letters, 83 .

Sahu, L and Bhattacharya, S and Dey, Shobhana (2021) Effect of reagents on flotation kinetics of differently sized feeds. International Journal of Coal Preparation and Utilization .

Sahu, M K and Palit Sagar, S (2021) Nonlinearity in the propagation of acoustic waves: Simulation and experimental validation in a creep damaged material. Materials Today, 44, Part 1 . pp. 2251-2256.

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.

Selvi, G T and Jha, S K (2021) Discharge Profile and Its Correlation with Estimated Parametric Sensitivity and Electrical Contact Resistance Losses in Li-Ion Battery. Journal of The Electrochemical Society (JES), 168(11) .

Sen, Mainak and Suman, Swati and Mukherjee, Shreya and Banerjee, Trideep and Sivaprasad, S and Tarafder, S and Bhattacharjee, Amit and Kar, Sujoy (2021) Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy. International Journal of Fatigue, 148 (IF-4.369 ). p. 106238.

Seshu Kumar, A and Khadeer, S A and Rajinikanth, V and Pahari, Santanu and Kumar, B Ravi (2021) Evaluation of bond interface characteristics of rotary friction welded carbon steel to low alloy steel pipe joints. Materials Science and Engineering A, 824 .

Shikuku, V O and Mishra, T (2021) Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isotherms. Applied Water Science, 11(6) .

Siddique, A B and Hossain, S M and Pramanick, A K and Ray, M (2021) Excitation dependence and independence of photoluminescence in carbon dots and graphene quantum dots: insights into the mechanism of emission. Nanoscale, 13(39) .

Siddique, A B and Morrison, K and Venkata, G and Pramanick, A K and Banerjee, N and Ray, M (2021) Charge Transport through Functionalized Graphene Quantum Dots Embedded in a Polyaniline Matrix. ACS Applied Electronic Materials, 3(3) . pp. 1437-1446.

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190 .

Singh, Rahul and Yadav, Surya Deo and Sahoo, Biraj K and Ghosh Chowdhury, S and Kumar , Abhishek (2021) Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures. Defence Science Journal, 71(3) . pp. 383-389.

Srivastava, A and Kamaraj, A and Mandal, K and Mandal, G K (2021) Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel. Metals and materials international .

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Tome, Sylvain and Nana, A and Kaze, C R and Djobo, J N Y and Alomyri, T and Kamseu, E and Etoh, Marie-Annie and Etame, Jacques and Kumar, Sanjay (2021) Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Add and Artificial Seawater. Silicon .

Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) .

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Yadav, Anshul and Singh, K and Panda, Asit Baran and Labhasetwar, P K and Shahi, Vinod K (2021) Membrane distillation crystallization for simultaneous recovery of water and salt from tannery industry wastewater using TiO2 modified poly (vinylidene fluoride-co-hexafluoropropylene) nanocomposite membranes. Journal of Water Process Engineering, 44 .

Thesis

Yadav, Abhishek (2021) Synthesis of nano crystalline nickel by severe plastic deformation. Masters thesis, CSIR-National Laboratory Jamshedpur, Jharkhand .

This list was generated on Fri Mar 29 15:12:57 2024 IST.