Items where Division is "Material Science and Technology" and Year is 2020

A

Ali, Rashid and Akhtar, Muhammad Umair and Zahoor, Aqib and Ali, Fahad and Scudino, Sergio and Shahid, Rub Nawaz and Tariq, Naeem ul Haq and Srivastava, V C and Uhlenwinkel, V and Hasan, B A and Eckert, J (2020) Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Materials Chemistry and Physics, 251 (IF-3.408). p. 123071.

Ammasi, A (2020) Effect of Heating Rate on Decomposition Temperature of Goethite Ore. Transactions of The Indian Institute of Metals, 73(1) (IF-1.205). pp. 93-98.

Anantapadmanabahn, S S and Mishra, G and Parida, S (2020) A brief review on the development of self-healing, hydrophobic and antifouling epoxy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 1-11.

Aruna, S T and Latha, S and Lakshmi, R V (2020) Multifunctional properties of electrodeposited nickel composite coating containing nanosized monoclinic zirconia particles. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 63-74.

B

Balani, K (2020) An opinion on hydroxyapatite based bio-composites as bone-scaffolds. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 13-19.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Bansal, G K and Rajnikanth, V and Ghosh, Chiradeep and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2020) Effect of cooling rate on the evolution of microstructure and mechanical properties of nonisothermally partitioned steels. Materials Science and Engineering: A, 788 (IF-4.652). p. 139614.

Bansal, G K and Sahoo, Biraj and Chandan, A K (2020) Metallurgical Perspective on Quench and Partitioned Advanced High Strength Steels. Steel Tech, 14(4) (NonSCI). pp. 60-64.

Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064.

Bisht, K S and Sah, K (2020) Spectroscopic changes in conventional magnetorheological fluid and graphene oxide based magnetorheological fluid with combustion method. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 89-93.

C

Chakravarty, Koushik and Kumar, Sunil (2020) Increase in energy efficiency of a steel billet reheating furnace by heat balance study and process improvement. Energy Reports, 6 (IF-3.83). pp. 343-349.

Chakravarty, S and Chakravarty, K and Mishra, V and Chakladar, S and Mohanty, Ashok and Sharma, Mamta (2020) Characterization of Chemical Structure with Relative Density of Three Different Ranks of Coal from India. Natural Resources Research, 29(5) (IF-3.708). pp. 3121-3136.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.

Char, M and Chakrabarty, A K and Metya, A K and Kar, Abhijit (2020) Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface. Journal of Material Engineering and Performance, 29(4) (IF-1.652). pp. 2305-2315.

Chennakesavulu, K and Sreedevi, P and Raju, G B and Reddy, G R (2020) Study on interaction of p-sulfonato calix[6]arene with arsanilic acid. Journal of dispersion science and technology, Online .

D

Das, A and Mohapatra, M and Basu, S (2020) Electrochemical application of shape and phase dependant copper sulphide for costeffective next generation supercapacitive energy storage: A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 95-102.

Das, Bhaskar and Hossain, S M and Pakhira, B and Pramanick, A K and Das, Rahul and Ray, M (2020) Fluorescence quenching based detection of p-nitrophenol using luminescent silicon nanocrystals and insights into the quenching mechanism. Semiconductor Science and Technology, 35(3) (IF-2.361). 035003 .

Das, T K and Dutta, Chandan and Kumar, Alok and Kadu , Satish and Palit Sagar, S (2020) Real-Time Parametric Evaluation ofWeld in Metallic Wires: A 3-D Simulation and Experimental Validation. Journal of Nondestructive Evaluation, 39(2) (IF-1.950). p. 35.

Dey, Rima and Tarafder, Soumitra and Bar, H and Sivaprasad, S (2020) Correlating Effect of Temperature on Cyclic Plastic Deformation Behavior with Substructural Developments for Austenitic Stainless Steel. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 480-496.

Director, NML (2020) Journal of Metallurgy and Materials Science : Special Issue on Specialized and Smart Coatings. In: Journal of Metallurgy and Materials Science. CSIR-NML, Jamshedpur, Jamshedpur, pp. 1-112. ISBN 0974-1267

Dutta, Siuli and Panda, A K and Mitra, Amitava and Chatterjee, S and Roy, Rajat K (2020) Microstructural evolution, recovery and recrystallization kinetics of isothermally annealed ultra low carbon steel. Materials Research Express, 7(1) (IF-1.449). 016554.

Dutta, Siuli and Panda, Ashis K and Chatterjee, Subrata and Roy, Rajat K (2020) Effect of annealing treatment on magnetic texture of cold rolled ULC steel. Materials Letters, 276 (IF-3.204). p. 128211.

F

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

G

Ghosh, S and Mondal, P and Rathina, B and Chatterjee, K (2020) Effect of dual crosslinking on physico-chemical properties of hydrogels prepared from chitosan and alginate. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 31-40.

Gorain, N and Walunj, M G and Soni, and Kumar, M and Kumar, B R (2020) Effect of continuous annealing process on various structure parameters of martensite of dual-phase steels. Archives of civil and mechanical engineering, 29(4) (IF-3.672). pp. 2305-2015.

Guguloth, K and Ghosh, M and Swaminathan, J and Mitra, R (2020) Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5Nb alloy. Materials Science and Engineering A, 791 . p. 139681.

Gupta, Siddhi and Webster, T J and Sinha, Arvind (2020) Correction to: Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface. Gupta S, Webster TJ, Sinha A. J Mater Sci Mater Med. 2020 Jul 21;31(8):63. doi: 10.1007/s10856-020-06399-1. PMID: 32696134. Journal of Materials Science - Materials in Medicine, 31(8) (IF-2.489). p. 63.

H

Hasan, Sk Md and Ghosh, M and Chakrabarti, D and Singh, S B (2020) Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels. Materials Science & Engineering A, 771 (IF-4.081). p. 138590.

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

K

Kailath, A J and Sinha, Arvind (2020) Mg-based biodegradable alloys for orthopedic implants - A review. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 59-70.

Kaithwas, C K and Bhuyan, P and Pradhan, S K and Mandal, S (2020) Hall-Petch’ type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy. Corrosion Science, 175 .

Kakati, A and Das, S (2020) Metallic gold thin film micropattern on polydimethylsiloxane film for flexible electronic sensors and circuits. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 49-55.

Kamaraj, A and Haldar, Nimai and Murugaiyan, Premkumar and Misra, S (2020) High-Temperature Simulation of Continuous Casting Mould Phenomena. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2025-2031.

Khadeer, S A and Babu, P R and Kumar, B R and Kumar, A S (2020) Influence of Upset Pressure on Microstructure and Mechanical Properties of Friction-Welded AISI 4140 Low Alloy Steel Pipes. Transactions of Indian Institute of Metals, 73(2) (IF-1.205). pp. 465-478.

Khadeer, S A and Babu, P R and Kumar, B Ravi and Kumar, A Seshu (2020) Evaluation of friction welded dissimilar pipe joints between AISI 4140 and ASTM A 106 Grade B steels used in deep exploration drilling. Journal of Manufacturing Processes, 56 (Part A) (IF-4.086). pp. 197-205.

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R (2020) Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel. Materials Science and Technology, 36(13) (IF-1.835).

Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R and Albert, S K (2020) Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel. International Journal of Pressure Vessels and Piping, 188 (IF-2.230).

Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.

Kumar, Dhanranjan and Kumari, Munchun and Murugaiyan, Premkumar and Das, T K and Roy, Rajat K and Mitra, A and Shuvaeva, E and Churyukanov, M and Kaloshkin, S and Panda, A K (2020) Impact of uniaxial stress on soft-magnetic and magneto-impedance properties of vitrified magnetostrictive microwires. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154861.

Kumar, Sujeet and Djobo, J N Y and Kumar, Anil and Kumar, Sanjay (2020) Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement. European Journal of Environmental and Civil Engineering , 24(6) . pp. 833-848.

Kumar, Sunil (2020) Structural Evolution of Iron–Copper (Fe–Cu) Bimetallic Janus Nanoparticles during Solidification: An Atomistic Investigation. The Journal of Physical Chemistry C, 124 (IF-4.309). pp. 1053-1063.

Kumar, Sunil and Mishra, T (2020) Organization of Bio-Molecules in Bulk and Over the Nano-Substrate: Perspective to the Molecular Dynamics Simulations. In: Biointerface Engineering: Prospects in Medical Diagnostics and Drug Delivery. Springer Nature Singapore, pp. 149-166.

Kumar, Sunil and Mishra, T (2020) Shock wave induced exfoliation of molybdenum disulfide (MoS2) in various solvents: All-atom molecular dynamics simulation. Journal of Molecular Liquids, 314 (5.065). p. 113671.

Kumar, Sunil and Mishra, T and Mahata, Avik (2020) Manipulation of mechanical properties of monolayer molybdenum disulfide: Kirigami and hetero-structure based approach. Materials Chemistry and Physics, 252 (IF-3.408). p. 123280.

Kumari, A and Tripathy, A K and Ramaswamy, V (2020) Performance characterization and misplacement studies of liquid–solid fluidized bed density separator for coal beneficiation using Taguchi-ANOVA method. Particulate Science & Technology .

Kundu, B and Balla, V K and Muraleedharan, K (2020) Technology glimpse of bioceramic implants developed by CSIR-CGCRI, Kolkata. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 49-57.

M

Majee, B P and Mishra, A K (2020) Recent advances in photodetection applications of two dimensional MoS2 nanostructures. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 103-126.

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 29-47.

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29 . pp. 7598-7606.

Mishra, Prerna and Rajpurohit, R S and Srinivas , N C S and Sastry, G V S and Singh, Vakil (2020) Ratcheting Fatigue Behavior of Modified 9Cr-1Mo Steel at Room Temperature. Metals and Materials International, Online (IF-1.990).

Mishra, Suman K (2020) Toughening of nanocomposite hard coatings. Reviews on advanced materials science , 59(1) (IF-1.197). pp. 553-585.

Mishra, T (2020) Prospective of titania based photocatalyst for environmental reduction reactions. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 135-146.

Modassir, A and Khajuria, A (2020) Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels. Materials Chemistry and Physics , 249 (IF-3.408).

Modassir, A and Khajuria, A and Bedi, R (2020) Effect of Re-normalizing and Re-tempering on Inter-critical Heat Affected Zone(S) of P91B Steel. Manufacturing Engineering . pp. 255-270.

Mohanty, B and Jena, B K and Kandasamy, M and Dalai, N and Sahu, Ranjan K and Kadam, R M and Chakraborty, B and Jena, B (2020) The role of Se vacancies and Fe doping of nickel selenide in the water oxidation reaction. Sustainable Energy and Fuels, 4(6) (IF-5.503). pp. 3058-3065.

Mohta, Keshav and Gupta, Suneel K and Soupramanien, C and Swaminathan, J and Chattopadhyay, J (2020) High temperature deformation behavior of Indian PHWR Calandria material SS 304L. Nuclear Engineering and Design, 368 (IF-1.620).

Munda, Parikshit and Hussain, M M and Singh, C V and Bagui, S (2020) Failure Analysis of a Steam Superheater Tube of a Vacuum Distillation Unit (VDU) in a Petrochemical Industry. Journal of Failure Analysis and Prevention, 20 (IF-0.800). pp. 1896-1906.

Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.

Murugaiyan, Premkumar and Mitra, Amitava and Roy, Rajat K and Bijalwan, P K and Dutta, Monojit and Banerjee, Atanu and Panda, A K (2020) Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153255.

P

Pal, Anindya and Metya, Avijit Kumar and Chowdhury, R A and Sinha, A (2020) Structural and Mechanical Behavior of Mechanochemically Synthesized Nanocrystalline Hydroxyapatite from Mercenaria Clam Shells. Transactions of the Indian Ceramic Society, 29(11) . pp. 175-181.

Panda, Ashis K and Mohapatra, J N and Murugaiyan, Premkumar and Roy, Rajat K and Mitra, Amitava (2020) Impact of Pre-formed Martensite on the Electromagnetic Properties and Martensitic Transformation Kinetics of Uniaxially Tensile Loaded 304 Stainless Steel. Journal of Materials Engineering and Performance , 29 . pp. 7141-7152.

Panda, Ashis K and Roy, Rajat K and Murugaiyan, Premkumar and Das, S and Das, T K and Mitra, A (2020) Rapidly quenched magnetic materials for functional and sensor applications. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 81-88.

Perumal, G and Chakrabarti, A and Pati, S and Singh, S and Reddy, V and Grewal, H S and Manivasagam, G and Arora, H S (2020) Limiting platelet adhesion in stainless steel bio-implants through microstructural modification. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 41-48.

Peter, Nicolas J and Duarte, Maria J and Liebscher, Christian H and Srivastava, V C and Uhlenwinkel, Volker and Jägle, Eric A and Dehm, Gerhard (2020) Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds, 820 . p. 153149.

Prithiv, T S and Thirumurugan, G and Madan, M and Kamaraj, A (2020) Thermodynamic Assessment of Steelmaking Practices for the Production of Re-sulfur Steels. Transactions of the Indian Institute of Metals, 73(6) (IF-1.205). pp. 1595-1603.

R

Rai, R K and Sahu, J K and Das, S K and Paulose, N and Fernando, C (2020) Creep-fatigue deformation micromechanisms of a directionally solidified nickel-base superalloy at 850 degrees C. Fatigue & fracture of engineering materials & structures, 43(1) (IF- 2.555). pp. 51-62.

Rai, R K and Sahu, J K and Paulose, N and Fernando, C (2020) Low Cycle Fatigue Behavior of a Directionally Solidified Nickel-Based Superalloy: Mechanistic and Microstructural Aspect. Metallurgical and Materials Transactions A - Physical metallurgy and materials science, 51(6) (IF-2.050). pp. 2752-2765.

Rajpurohit, R S and Jena, P S M and Mahato, B and Sahu, J K (2020) Strain partitioning between matrix and precipitates during fatigue deformation of 2.25Cr-Mo steel. Material Science and Technology (IF-1.835).

Rajpurohit, R S and Mishra, P and Srinivas , N C S and Singh, S R and Singh, V (2020) Ratcheting Fatigue Behaviour of Zircaloy-2 at 300 degrees C. Metals and Materials International (IF-1.990).

Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.652). p. 138823.

Rao, V V and Ravindra, V (2020) Vacuum based coatings for engineering applications. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 57-61.

Rao, V V and Ravindra, V (2020) Vacuum furnaces for metallurgical processing. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 97-101.

S

Saha, B and Vaidya, S S and Bhattacharjee, K and Bhagavatula, I and Prasad, V (2020) Weakly coupled metal-semiconductor plasmonic nanoparticles in solution. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 127-133.

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sahu, Ranjan K (2020) Some notable experiments of graphene. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 147-153.

Saida, S and Chakravarty, S and Sahu, Rina and Das Biswas, Rupa and Chakravarty, K (2020) Laboratory-Scale Tests for the Utilization of High Ash Non-Coking coal in Coke-Making Process. Transactions of the Indian institute of metals, 73(5) (IF-1.205). pp. 1257-1263.

Sarangi, C K and Sahu, B P and Mishra, B K and Mitra, Rahul (2020) Effect of annealing on structure and properties of pulse electroplated Ni-W alloy coating. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 85-96.

Sarkar, C and Anuvrat, K and Garai, S and Sahu, Sumant Kumar and Chakraborty, J (2020) One pot method to synthesize three-dimensional porous hydroxyapatite nanocomposite for bone tissue engineering. Journal of Porous Materials, 27(1) (IF-2.183). pp. 225-235.

Sarkar, C and Sinha, Arvind (2020) Synthesis of fully interconnected multiporous hydroxyapatite block for orthopedic application. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 21-29.

Shah, Minal and Sahoo, K L and Das, Swapan K and Das, Goutam (2020) Wear Mechanism of High Chromium White Cast Iron and Its Microstructural Evolutions During the Comminution Process. Tribology Letters, 68(3) (IF-2.566).

Sharma, D and Gupta, S and Mehta, B R (2020) Techniques for investigation: Semiconductor/electrolyte interface processes in photo electrochemical cell for solar water splitting. Journal of Metallurgy and Materials Science,, 62(1-2) . pp. 75-54.

Shukla, A K and Sivakumar, B and Mishra, Suman K (2020) Corrosion Behavior of Ti-Si-B-C Nanocomposite Hard Coating with Different Si Contents on 4130 Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51(7) (IF-2.050). pp. 3576-3586.

Siddique, A B and Singh, V P and Pramanick, A K and Ray, M (2020) Amorphous carbon dot and chitosan based composites as fluorescent inks and luminescent films. Materials Chemistry and Physics, 249 (IF-3.408).

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Singh, Swarnima and Pandey, K K and Bose, S K and Keshri , A K (2020) Role of surface nanocrystallization on corrosion properties of low carbon steel during surface mechanical attrition treatment. Surface and Coatings Technology, 396 (IF-3.192). p. 125964.

Singh, Y P and Dasgupta, S and Nayar, S and Bhaskar, R (2020) Optimization of electrospinning process & parameters for producing defect-free chitosan/polyethylene oxide nanofibers for bone tissue engineering. Journal of biomaterials science-polymer edition, 31(6) (IF-2.158). pp. 781-803.

Singla, Rashmi and Alex, T C and Kumar, Rakesh (2020) On mechanical activation of glauconite: Physicochemical changes, alterations in cation exchange capacity and mechanisms. Powder Technology, 360 (IF-4.142). pp. 337-351.

Soni, and Sharma, S K and Mishra, Suman K (2020) The effect of Si content on structural, mechanical and optical behaviour of magnetron sputtered Al–Si–N nanocomposite thin films. Journal of Alloys and Compounds, 831 (IF-4.175). p. 154686.

Soni, and Shekh, M J and Sharma, S K and Mishra, Suman K (2020) Strain rate sensitivity behaviour of the thin films of Al, Al-Si and nanocomposite Al-Si-N: A comparative study. Materials Characterization, 169 (IF-3.562).

Srivastava, A K and Patel, N K and Ravi Kumar, B and Sharma, A and Ahn, Byungmin (2020) Strength-Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation. Journal of Materials Engineering and Performance, 29 . pp. 2783-2791.

T

Toymoori, A and Webster, T (2020) The role of nanomedicine in the treatment of osteosarcoma and in the prevention of infections. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 1-12.

Tripaliya, S S and Gupta, M K and Sahu, Rina and Pappu, A and Sharma, C and Chaturvedi, A K and Srivastava, A K (2020) Tuning surface resistivity and thermal conductivity of water resistant fly ash waste based polymer composite via tailoring the interfacial polarization. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 71-80.

V

Vanithakumari, S C and George, R P and Mudali, U Kamachi (2020) High performance specialized coatings for applications in corrosive environments. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 13-27.

Varshney, A and Sangal, S and Pramanick, A K and Mondal, K (2020) On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties. Materials Science and Engineering A, 793 (IF-4.652). p. 139764.

Verma, Piyush Chandra and Mishra, Suman K (2020) Synthesis of iron boride powder by carbothermic reduction method. Materials Today: Proceedings, Online (SNIP-0.576).