Items where Division is "Material Science and Technology" and Year is 2016
Number of items: 57.
Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113.
Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885.
Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash R and Pancholi, Vivek and Bhattacharjee, A (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science, 58(3) (IF 0.04). pp. 147-152.
Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.
Beato-lopez, J J and De la cruz blas, Ca and Mitra, Amitava and Gomez-polo, C (2016) Electrical model of giant magnetoimpedance sensors based on continued fractions. Sensors and Actuators A - Physical, 242 (IF-2.499). pp. 73-78.
Chatterjee , Partha Pratim (2016) Recent developments in aerospace materials. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 53-56.
Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.
Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.
Das, Arpan (2016) Contribution of deformation-induced martensite to fracture appearance of austenitic stainless steel. Materials Science and Technology, 32(13) (IF-1.180). pp. 1366-1373.
Das, Arpan (2016) Intervention of martensite variants on the spatial aspect of microvoids. Materials Research Express, 3(6) (IF-1.068).
Das, T K and Banerjee, P and Mandal, S K (2016) Giant magnetoimpedance intrinsic impedance and voltage sensitivity of rapidly solidified Co66Fe2Cr4Si13B15 amorphous wire for highly sensitive sensors applications. Applied Physics A-Materials Science & Processing, 122(11) (IF-1.455).
Dasgupta, A and Randhawa, N S and Chandrashekhar, S and Goyal, RP (2016) Filtration studies for separation of solid particles from slurry generated in hydrometallurgical processing of ores and concentrates. Journal of Metallurgy and Materials Science, 58(2) (IF-0.04). pp. 69-79.
Datta, A K and Sivaprasad, S and Prasad, P (2016) System approach of modeling of high rise steel structures against earthquake excitations. Journal of Metallurgy and Materials Science, 58(1) (IF-0.04). pp. 25-33.
Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157.
Dey, Sushmita and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A and Panda, A K (2016) Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons. Journal of Magnetism and Magnetic Materials, 397 (IF-2.630). pp. 342-346.
Dey, Swapna and Chattoraj, I (2016) Interaction of strain rate and hydrogen input on the embrittlement of 7075 T6 Aluminum alloy. Materials Science and Engineering: A, 661 (IF-3.094). pp. 168-178.
Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, S (2016) Mechanical properties and durability of volcanic ash based geopolymer mortars. Construction and Building Materials, 124 (IF-3.169). pp. 606-614.
Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146.
Garai, Subhadra and Sinha, Arvind (2016) Three dimensional biphasic calcium phosphate nanocomposites for load bearing bioactive bone grafts. Materials Science and Engineering C, 59 (IF-4.164). pp. 375-383.
Gupta, S K and Kumar, Sanjeev and Patwari, Anand Ganvir and Chatterjee, A and Ghosh, Somnath (2016) Control of sulphur and minimisation of centre line segregation for Rail Steel. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 243-250.
Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10.
Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654).
Khanduri, Prabhat Chandra and Upadhyay, T C (2016) Dependence of dielectric constant and loss tangent on electric field in antiferroelectric squaric acid crystal. Journal of Metallurgy and Materials Science, 58(4) (IF 0.04). pp. 213-220.
Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Computational Investigation of the Influence of Fly Ash Silica Content and Shape on the Erosion Behaviour of Indian Coal Fired Boiler Grade Steels. Journal of The Institution of Engineers (India): Series C, 97(3) . pp. 375-380.
Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2016) Feed Water Chemistry-Related Corrosion Failures in Subcritical 250 MW Coal-Fired Boiler. Journal of Failure Analysis and Prevention , 16(4) (IF- 0.469). pp. 703-711.
Madge, S V and Louzguine, D V and Kawashima, A and Greer , A L and Inoue, A (2016) Compressive plasticity of a La-based glass-crystal composite at cryogenic temperatures. Material & Design, 101 (IF- 4.364). pp. 146-151.
Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.
Mandal, Anup and Guguloth, K and Bandyopadhyay, T K (2016) Characterization of Microstructure and Mechanical Properties of 9.2Cr0.45V0.7C Heat-Resistant Steel. Metallography, Microstructure, and Analysis, 5(2) (IF-0.58). pp. 95-107.
Mehta, M I and Kashyap, B P and Singh, R K P (2016) Study on flow properties of rotor grade steel. Journal of Metallurgy and Materials Science, 58(4) (IF- 0.04). pp. 221-229.
Metya, Avijit and Munda, Parikshit and Rajnikanth, V and Roy, Rajat (2016) Failure Analysis of SA213-T22 Re-heater Rear Tube of Thermal Power Plant. Transactions of the Indian Institute of Metals, 69(2) (IF-0.533). pp. 665-668.
Mishra, Suman K and N, Jagdeesh and Pathak, L C (2016) Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process. Journal Of Materials Engineering And Performance, 25(7) (IF-1.331). pp. 2570-2575.
Munda, Parikshit and Das, Swapan K (2016) Failure analysis of an aeroengine compressor blade: A case study. IIM Metal News, 19(3) (NON-SCI). pp. 17-19.
Munda, Parikshit and Kumar, S and Prakash, Amit and Husain, M M and Rajnikanth, V and Ghosh Chowdhury, S (2016) Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station. Journal of Failure Analysis and Prevention, 16(1) (IF 0.469). pp. 9-18.
Murthy, G V S and Patel, D and Sahoo, K L (2016) A study of precipitation behaviour of A356 alloy using ultrasonic velocity measurements. Insight - Non-Destructive Testing and Condition Monitoring, 58 (IF-0.527). pp. 367-372.
Nanda, T and Ravi Kumar, B and Bhinder, J (2016) Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super-Martensitic Stainless Steel Subjected to Different Prior Conditions. Materials and Manufacturing Processes, 31(8) (IF 2.274). pp. 995-1003.
Nanda, T and Ravi Kumar, B and Singh, V (2016) A Thermal Cycling Route for Processing Nano-grains in AISI 316L Stainless Steel for Improved Tensile Deformation Behaviour. Defence Science Journal, 66(5) (IF-0.500). pp. 529-535.
Nath, S K and Kumar, Sanjay (2016) Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement. Construction and Building Materials, 125 (IF-3.169). pp. 127-134.
Ogundiran, M B and Kumar, Sanjay (2016) Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics. Construction and Building Materials, 125 (IF-3.169). pp. 450-457.
Panda, A K and James, Ajil P and Mohan, Aneesh and Dey, Sushmita and Roy, Rajat K and Mitra, A (2016) Investigation on Transverse Defect and Cavitation Depth in Ferrous Pipe Using Melt Spun FeSiB Ribbon as Magnetostrictive Sensing Element. NDT & E International, 80 (IF-2.726). pp. 15-22.
Pandya, Achal and Singh, J K (2016) Transformation of chloride contaminated unstable rusts on weathering and plain carbon steels into stable forms by treatment with extract of fruit juice of Indian gooseberry (Amla). Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 47-52.
Pathak, Prashant and Karani, Arnab and Shome, M (2016) Development of HSLA steel with high temperature tensile properties. Journal of Metallurgy and Materials Science, 58(2) (IF- 0.04). pp. 57-64.
Pramanick, Ajit Kumar and Das, H and Reddy, G M and Ghosh, M and Das, Goutam and Nandy, S and Pal, T K (2016) Development and design of microstructure based coated electrode for ballistic performance of shielded metal arc welded armour steel joints. Materials & Design, 103 (IF 4.364). pp. 52-62.
Rajnikanth, V and Munda, Parikshit and Kumar, Tipu and Ghosh Chowdhury, S and Sangal, Sandeep (2016) Effect of thermomechanical processing schedule on the texture and microstructure of pipeline grade API X80 microalloyed steel. 4 th International conference on Thermomechanical Simulation and Processing of Steels, SIMPRO 2016, 4 (NON-SCI). pp. 231-239.
Ray, Ashok K and Roy, Nilima and Raj, A and Roy, B N (2016) Structural integrity of service exposed primary reformer tube in a petrochemical industry. International Journal of Pressure Vessels and Piping, 137 (IF-1.28). pp. 46-57.
Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML.
Reddy, G and Sahoo, K L and Ganguly, R I and Dash, R R and Rao, P S P and Reddy, G S (2016) Cast and age hardening behaviour of Al6061 alloy reinforced with an in-situ ceramic composite prepared by carbo thermal reduction of fly ash in plasma reactor. Journal Of Composite Materials, 50(22) (IF-1.494). pp. 3027-3041.
Santosh, R and Das, Swapan K and Das, Goutam and Korody, J and Kumar, S and Singh, P K and Ghosh, M (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions A, 47A(7) (IF-1.874). pp. 3511-3521.
Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.
Sen, S and Chakraborty, N and Rana, P and Sahu, Ranjan K and Singh, S and Panda, A K and Tripathy, S and Pradhan, D K and Sen, A (2016) Effect of Ti doping on the structural, electrical and magnetic properties of GaFeO3. Journal of Materials Science: Materials in Electronics, 27(5) (IF-2.019). pp. 4647-4652.
Sheikh, Lubna and Tripathy, S and Nayar, S (2016) Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery. Rsc Advance, 6(67) (IF-3.108). pp. 62556-62571.
Shekhar, S and Singh, R K and Chalavadi, G (2016) Study of Process Efficiency for High-Ash Fine Coal Cleaning in a Kelsey Centrifugal Jig. International Journal of Coal Preparation and Utilization (IF-0.673). pp. 1-10.
Shi, D and Bhattacharya, S and Nayar, S and Webster, T J (2016) Optimizing superparamagnetic iron oxide nanoparticles as drug carriers using an in vitro blood-brain barrier model. International Journal Of Nanomedicine, 11 (IF- 4.3).
Singh, R and Tiwari, S K (2016) Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels. Lasers in Engineering, 35(1-4) (IF-0.214). pp. 63-74.
Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279.
Singh, V and Das, Suchandan K (2016) Thermo-fluid Mathematical Modeling of Steel Slab Caster: Progress in 21st Century. Isij International, 56(9) (IF-1.11). pp. 1509-1518.
Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Y L and Tsibina, O V and Yakubailik, E K and Abhilash, (2016) Ferritization of industrial waste water and microbial synthesis of iron-based magnetic nanomaterials from sediments. Environmental Progress & Sustainable Energy, 35(5) (IF-1.672). pp. 1407-1414.
Yoo, Kyoungkeun and Lee, Kwang Seok and Jha, Manis K and Lee, Jae-chun and Cho, Kuk (2016) Preparation of Nano-Sized Tin Oxide Powder from Waste Pb-Free Solder by Direct Nitric Acid Leaching. Journal of Nano-science and Nanotechnology, 16 (IF-1.483). pp. 11238-11241.