Items where Division is "Material Science and Technology" and Year is 2012

B

Banerjee, Arunima and Sivaprasad, S (2012) Fracture and Deformation Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Bansal, A and Sinha, Arvind (2012) Dehydration driven changes in the structure and mechanical behavior of electrospun poly (vinyl alcohol) nanofibers. Materials Science and Engineering: C, 32 (3). pp. 587-593.

Behera, R K and Swain, S K and Sen, S and Mishra, S C (2012) Property prediction of ductile iron : Artificial neural network approach. Journal of Metallurgy and Materials Science,, 54(3) . pp. 197-202.

Bera, S and Ghosh Chowdhury, S and Lojkowsky, W and Manna, I (2012) Synthesis of CuCr and CuCrAg alloys with extended solid solubility with nano-Al2O3 dispersion by mechanical alloying and consolidation by high pressure sintering. Materials Science and Engineering : A, 558 (IF-2.003). pp. 298-308.

Berlia, Rohit and Ghosh Chowdhury, S (2012) Mechanical behaviour of TWIP steels:effect of grain size and composition. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Bhattacharjee, PP and Tsuji, N (2012) Development of Cube Texture in Pure Ni Following Ultrahigh by Accumaulative Roll Bonding and Annealing. Materials Science Forum, 715-716 . 521- .

Bhattacharya, S and Jenamoni, K and Nayar, S (2012) Stability of biomimetic ferrofluids established by a systematic study using microwave irradiation at defined wattages. Journal of Magnetism and Magnetic Materials, 324 (20). pp. 3261-3266.

C

Chauhan, Gyanendra Pratap Singh (2012) Alloy synthesis and material characterization of Zr-Ti-Nb based alloys. Masters thesis, CSIR-NML .

D

Dadhich S, Devesh and Sahu, Ranjan K (2012) Study of Photocatalytic degradation of Congo red pollutants using microwave derived SrFe12O19. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Dadhich S, Devesh and Sahu, Ranjan K (2012) Study of Transition Element doped Oxide based Permanent Magnets. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Das, Arpan (2012) Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel. PhD thesis, Jadavpur University.

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Raj, B and Murty, B S (2012) Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition. WELDING IN THE WORLD, 56 (07-08). pp. 10-17.

Das, C R and Albert, S K and Swaminathan, J and Raju, S and Bhaduri, A K and Murty, B S (2012) Transition of Crack from Type IV to Type II Resulting from Improved Utilization of Boron in the Modified 9Cr-1Mo Steel Weldment. Metallurgical and Materials Transactions A, 43A . pp. 3724-3741.

Das, Mousumi and Das, Goutam and Ghosh, M and Wegner, Matthias and Rajnikanth, V and Ghosh Chowdhury, S and Pal, T K (2012) Microstructures and mechanical properties of HPT processed 6063 Al alloy. Materials Science and Engineering A, 558 (IF-2.108). pp. 525-532.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Effect of aging and cryo rolling on microstructural chara-cterization and mechanical properties of precipitation hardenable 6063Al alloy. Material Science & Engineering, 552 (30). pp. 31-35.

Das, Mousumi and Pal, T K and Das, Goutam (2012) Use of Portable Automated Ball Indentation System to Evaluate Mechanical Properties of Steel Pipes. Transactions of the Indian Institute of Metals, 65 (2). pp. 197-203.

Das, Swapan K and Ghosh, R N and Sondhi, S K (2012) Prediction of carbide free layer formation in Fe-Ni Cr austentic steel process heater tube. Corrosion Engineering, Science and Technology, 47 (2). pp. 121-124.

Das, T K and Banerji, Pallab and Mandal, S K (2012) An embedded magnetic field sensing device utilizing giant magnetoimpedance (GMI) effect. In: 2012 Sixth International Conference on Sensing Technology, December 18 - 21, 2013, Kolkata.

Das, Tuhin and Ghosh Chowdhury, S (2012) Micro Structural Characterization of Tensile Deformed TWIP Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Dey, Ramendra Sundar and Hajra, Saumen and Sahu, Ranjan K and Raj, C Retna and Panigrahi, M K (2012) A rapid room temperature chemical route for the synthesis of graphene: metal-mediated reduction of graphene oxide. Chemical Communications, 48 (12). pp. 1787-1789.

Dey, U K (2012) Fracture Behaviour of Dissimilar Metal Weld Materials 304 LNSS & SA508 Cl. 3 Steel in Nuclear Piping. Masters thesis, NIT, Jamshedpur.

Dutta, Anupama and Sivaprasad, S (2012) Study of Mechanical Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Submitted)

Dutta, S and Das, Arpan and Barat, K and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement: Journal of the International Measurement Confederation, 45 (5). pp. 1140-1150.

E

Ebrahimifar, Hadi and Zandrahimi, Morteza (2012) The effect of Cr2O3 scale on electrical conductivity of Cobalt-spinel-coated ferritic stainless steel. Journal of Metallurgy and Materials Science,, 54(3) . pp. 219-224.

G

Garai, Subhadra and Jaisankar, Parasuraman and Singh, J K and Elango, Adirajan (2012) A comprehensive study on crude methanolic extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of mild steel in acid solution. Corrosion Science, 60 . pp. 193-204.

CSIR-NML (2012) A non-invasive process for sorting of alumina rich iron ores. 0060NF2012.

Ghosh, Arpita and Palit Sagar, S and Das, T K and Nayak, B (2012) Development of advanced sensor-based technique for iron-ore beneficiation. Exploratory (OLP). CSIR- National Metallurgical Lab, Jamshedpur. (Submitted)

Ghosh, M and Husain, M M and Gupta, R K (2012) Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel. ISIJ International, 52 (3). pp. 477-482.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V (2012) Structural characterisation of reaction zone for friction stir welded aluminium–stainless steel joint. Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Kumar, K and Mishra, R S (2012) Process Optimization for Friction-Stir-Welded Martensitic Steel. Metallurgical & Materials Transactions A, 43A . pp. 1966-1975.

Ghosh, S and Sahu, Ranjan K and Raj, C Retna (2012) Pt-Pd alloy nanoparticle-decorated carbon nanotubes: a durable and methanol tolerant oxygen reduction electrocatalyst. Materials and Corrosion-Werkstoffe Und Korrosion, 23(38) .

Ghosh, Sabita and Das, Goutam (2012) Effect of pre strain on the indentation fracture toughness of high strength low alloy steel by means of continuum damage mechanics. Engineering Fracture Mechanics, 79 . pp. 126-137.

Gopalakrishna, K and Sivaprasad, S and Venkateswarlu, K and Hari Kumar, K C (2012) Microstructural evolution and aging behavior of cryorolled Al-4Zn-2Mg alloy. Materials Science and Engineering A, 535 (IF-2.003). pp. 129-135.

Goswami, B and Kumar, S B and Ray, Ashok K (2012) Perspectives of recent developments in nickel base superalloys. Journal of Metallurgy and Materials Science, 54(1) . pp. 31-52.

Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

Guguloth, K and Swaminathan, J and Bagui, Sumanta and Ray, Ashok K (2012) Remnant Life Assessment and Microstructural Studies on Service Exposed Primary Reformer Tubes of a Catalytic Converter of an Ammonia Plant. High Temperature Materials Proceedings, 31 . pp. 759-767.

Gujral, Amandeep and Ravi Kumar, B (2012) Deformation Induced Martensitic Transformation of 304L Austenitic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Gupta, Siddhi and Goswami, Sudipta and Sinha, Arvind (2012) A combined effect of freeze--thaw cycles and polymer concentration on the structure and mechanical properties of transparent PVA gels. Biomedical Materials, 7 (1). 015006-1.

H

Hiteshkumar, Patel and Jyoti, Menghani (2012) Wear characteristics of unalloyed and alloyed LM25- Aluminium casting. Journal of Metallurgy and Materials Science, 54(2) . pp. 131-135.

Hore, S and Das, Suchandan K and Singh, Ratnakar and Bhattacharyya, K K (2012) Efficiency Study of a Water-Only Cyclone by Experimental and Data Modeling Techniques when Cleaning Indian Coal Fines. International Journal of Coal Preparation and Utilization, 32 (4). pp. 193-209.

I

Indulal, C R and Vaidyan, A V and Kumar, G Sajeev (2012) The ion exchange properties of nanosized cerium molybdo iodate and cerium phospho iodate. Journal of Metallurgy and Materials Science, 54(4) . pp. 299-302.

J

Jariwala, Deep and Chandra , Kaushik and Cao, Anyuan and Saikat , Talapatra and Shima, Mutshihiro and Anuhya, D and Prasad, V V S and Ribeiro, R and Canfield, P C and Wu, D and Srivastava , Anchal and Mandal, R K and Pramanick, A K and Vajtai , Robert and Ajayan , Pulickel M and Sastry, G V S (2012) Growth of Carbon Nanotubes on Quasicrystalline Alloys. The Banaras Metallurgist, 17 . pp. 57-67.

K

Kailath, A J and Mandal, Soumen (2012) The effect of Sn addition on the crystallization and thermal stability of Cu–Zr–Ti metallic glasses. Journal of Alloys and Compounds, 537 . pp. 275-279.

Kedia, Bipin and Panda, A K (2012) Modelling of the Electromagnetic Fluxes and Evaluation of Damage in Steels using Electromagnetic Techniques. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Krishna, K Gopala and Sivaprasad, S and Venkateswarlu, K and Kumar, K C Hari (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135.

Kumar, Piyush and Ravi Kumar, B (2012) Effect of Interrupted Annealing on Recrystallization of Heavily cold-rolled Austenatic Stainless Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumari, Chitra and Nayar, S (2012) Morphological change of electrospun nanofibers of poly(vinyl) alchohol with three different biomimetic inorganic minerals. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumari, Supriya (2012) Comparative Study on Biomimetically Synthesized Ferrofluid with the help of Sodium Hydroxide and Potassium Hydroxide. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

L

Li, X and Jiao, F and Al-Samman, T and Ghosh Chowdhury, S (2012) Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation. Scripta Materialia, 66 (3-4). pp. 159-162.

M

Madge, S V and Louzguine, D V and Lewandowski, J J and Greer , A L (2012) Toughness, extrinsic effects and Poisson’s ratio of bulk metallic glasses. Acta Materialia, 60 . pp. 4800-4809.

Mallik, Manab and Kailath, A J and Ray, K K and Mitra, R (2012) Electrical and thermophysical properties of ZrB2 and HfB2 based composites. Journal of the European Ceramic Society, 32 (10). pp. 2545-2555.

Marinelli, María Cecilia and Giertler, Alexander and Sahu, J K and Herenu, Silvina and Alvarez-Armas, Iris and Krupp, Ulrich (2012) The Effect of Ferrite Embrittlement in Duplex Steel on Fatigue Crack Propagation from the Low (LCF) to the Very High Cycle Fatigue (VHCF) Regime. In: 19th EUROPEAN CONFERENCE ON FRACTURE, Fracture Mechanics for Durability, Reliability and Safety, August 26-31, 2012, Kazan, Russia.

Mazumder, Rajat and Bandyopadhyay, N R and Palit Sagar, S (2012) Detection and quantification of lack-of-penetration in Al-Al friction stir welded plates using phased array ultrasonic technique. Journal of Non-destructive Testing & Evaluation, 10 (4). pp. 47-52.

Metya, Avijit Kumar and Prakash, Amit and Palit Sagar, S (2012) Evaluation of Equiaxed zone in Continuously Cast (CC) Billets using Ultrasonic C-Scan Imaging. Sponsored (SSP). NML, Jamshedpur.

Mishra, Suman K and Bhattacharyya, A S and Mahato, P and Pathak, L C (2012) Multicomponent Ti-Si-B-C superhard and tough composite coatings by magnetron sputtering. Surface and Coatings Technology, 207 . pp. 19-23.

Mishra, Suman K and Bhattacharyya, A S and Rupa, P K P and Pathak, L C (2012) XPS Studies on Nanocomposite Si-C-N Coatings Deposited by Magnetron Sputtering. Nanoscience and nanotechnology letters, 4 (3). pp. 352-357.

Mohan, B M and Ghosh, Arpita (2012) Fuzzy two-term controllers with multi-fuzzy sets: mathematical models and analysis. International Journal of Modelling, Identification and Control (IJMIC), 15(3) . pp. 199-218.

Murthy, G V S and Parveen, Nikhat and Nagesh, Ch R V S (2012) Processing of ilmenite (FeOTiO2) for value added products. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Murugesan, A P and Giribaskar, S and Gouthama, (2012) Metallographic studies on deformation microstructures of ECAE processed AA2014 aluminium alloy. Materials Science Forum, 702-703 . pp. 109-112.

N

Neha, and Nayar, S (2012) Synthesis and Characterization of Nanomagnetic Hydroxy-patite using both Iron Salt Solution and Ferrofluid. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2012) Neuro-optimal control of an unmanned helicopter. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology . pp. 1-14.

Nodland, David and Zargarzadeh, H and Ghosh, Arpita and Jagannathan, S (2012) Neural Network-Based Optimal Control of an Unmanned Helicopter. In: Advances in Intelligent and Autonomous Aerospace Systems. American Institute of Aeronautics and Astronautics, Reston, VA, Reston, VA 20191, pp. 33-57. ISBN 978-1-60086-897-9

P

Palit Sagar, S and Miyasaka, C and Ghosh, M and Tittmann, B R (2012) NDE of friction stir welds of Al alloys using high-frequency acoustic microscopy. Non-destructive Testing and Evaluation, 27(4) (IF-0.827). pp. 375-389.

Palit Sagar, S and Parida, N (2012) Centre for Non-destructive Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for materials characterisation and damage evaluation: an Overview. In: 18th World Conference on NDT, 18th WCNDT, 16-20 April, 2012, Durban, South Africa.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Panda, A K and Sharan, P K and Roy, Rajat K and Murthy, G V S and Mitra, A (2012) Generation and Detection of Guided waves in a Pipe with Defect using Rapidly Quenched Magnetostrictive Ribbons. Smart Materials and Structures, 21(4) . 045015.

Panda, A K and Singh, Satnam and Roy, Rajat K and Mitra, A (2012) Ferromagnetic Shape Memory Alloys (FSMAs) for Magneto-mechanical Applications. Science and Culture .

Panna, Praveen Kumar and Roy, Rajat K (2012) Study of Microstructural Behaviour of Medium Carbon Steel by Magnetic NDE Technique. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Parchur, A K and Prasad, A I and Rai, S B and Tewari, R and Sahu, Ranjan K and Okram, G S and Singh, R A and Ningthoujam, R S (2012) Observation of intermediate bands in Eu3+ doped YPO4 host: Li+ ion effect and blue to pink light emitter. AIP Advances, 2 (3). 032119-1.

Patra, S and Hasan, Sk. Md. and Narasaiah, N and Chakrabarti, D (2012) Effect of bimodaldistribution in ferritegrainsizes on the tensileproperties of low-carbonsteels. Materials Science and Engineering A, 538 (15). pp. 145-155.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. Journal of Materials Science, 47 (11). pp. 4660-4672.

Poddar, Palash and Sahoo, K L (2012) Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 556 (IF-2.003). pp. 891-905.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Prabhu, N S and Joseyphus, J and Sankara Narayanan, T S N and Ravi Kumar, B and Mitra, A and Panda, A K (2012) Residual Stress Analysis in Surface Mechanical Attrition Treated (SMAT) Iron and Steel Component Materials by Magnetic Barkhausen Emission Technique. IEEE Transactions on Magnetics, 48(12) (IF-1.363). pp. 4713-4717.

Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished)

Pramanick, A K and Gupta, Siddhi and Mishra, T and Sinha, Arvind (2012) Topographical heterogeneity in transparent PVA hydrogels studied by AFM. Materials Science and Engineering C, 32 (2). pp. 222-227.

Priyadarshi, Uddeshya and Mishra, Suman K and Kumar, K Shravan (2012) Multilayer Thermal Barrier Coating prepared by EB-PVD process and its structure property correlation. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

R

Raj, A and Goswami, B and Ray, Ajoy K (2012) High speed steels - A tribute of microalloyed steels. Journal of Metallurgy and Materials Science,, 54(4) . pp. 225-248.

Raj, A and Goswami, B and Ray, Ashok K (2012) Forge and heat-treatments in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(4) . pp. 249-268.

Raj, A and Goswami, B and Ray, Ashok K (2012) Perspectives of creep and fatigue behavior in microalloyed steels. Journal of Metallurgy and Materials Science, 54(2) . pp. 93-110.

Raj, A and Goswami, B and Ray, Ashok K (2012) Precipitation, recrystallization and elemental propositions in micro-alloyed steels. Journal of Metallurgy and Materials Science, 54(3) . pp. 155-173.

Raji, K and Alfred Cecil Raj, S (2012) Study of safe factor of sintered aluminium alloys using extrusion process. Journal of Metallurgy and Materials Science, 54(2) . pp. 137-142.

Rajnikanth, V and Munda, Parikshit and Minj, R K and Ghosh Chowdhury, S (2012) In Quest of self Reliance: NML’s steel development program. Science and Culture, Vol.78/No.11-12 . pp. 532-536.

Ranjan, Maindra and Ghosh, M (2012) The Effect of Cooling Rates on Vanadium Microalloyed Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ravi Kumar, B (2012) Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process. Materials Science Forum . pp. 627-630.

Ravi Kumar, B (2012) Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling. Scripta Materialia, 66 (9). pp. 634-637.

Ravi Kumar, B and Sahu, J K and Das, Swapan K (2012) Influence of Annealing Process on Recrystallisation Behaviour of a Heavily Cold Rolled AISI 304L Stainless Steel on Ultrafine Grain Formation. Materials Science Forum , 715-716 . pp. 334-339.

Ray, A and Sivaprasad, S and Chakrabarti, D (2012) A critical grain size concept to predict the impact transition temperature of Ti-microalloyed steels. International of Fracture, 173(2) . pp. 215-222.

Ray, Ajoy K and Sahu, Ranjan K and Rajnikanth, V and Bapari, H and Ghosh, M and Paul, Parimal (2012) Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material. Carbon, 50 (11). pp. 4123-4129.

Ray, Ashok K and Roy, P K (2012) High Cycle Fatigue and Cyclic Plastic Deformation Behav-iour of High Temperature Oxidation Resistant Titanium Aluminide Coated IMI834 Alloy at 873K. High Temperature Materials Proceeding, 31 . pp. 691-699.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & fracture of engineering materials & structures, 35 (2). pp. 108-113.

Roy, P K and Sahu, J K and Parida, N and Swaminathan, J and Guguloth, K and Tiwari, Y N and Sharma, R K (2012) Assessment of creep, stress ruptures and elevated temperature tensile properties of ASTM-T11 grade steel. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Roy, Rajat K and Shen, Shen and Kernion, Sam J and McHenry, Michael E (2012) Effect of P addition on nanocrystallization and high temperature magnetic properties of low B and Nb containing FeCo nanocomposites. Journal of Applied Physics, 111 . 07A301-1.

S

Sahu, J K and Krupp, U and Christ, H J (2012) Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel. International Journal of Fatigue, 45 . pp. 8-14.

Sahu, J K and Sahu, K K and Ray, A K (2012) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600 C. Institute of Mechanical Engineers, 226 . pp. 35-41.

Sahu, Puspendu and Shee, S K and Hamada, A S and Rovatti, L and Sahu, T and Mahato, B and Ghosh Chowdhury, S and Porter, D A and Karjalainen, L P (2012) Low strain rate deformation behavior of a Cr-Mn austenitic steel at -80oC. Acta Materialia, 60(2012) . pp. 6907-6919.

Sahu, Ranjan K and Ganguly, Koustav and Mishra, T and Mishra, M and Ningthoujam, R S and Roy, S K and Pathak, L C (2012) Stabilization of intrinsic defects at high temperatures in ZnO nanoparticles by Ag modification. Journal of Colloid and Interface Science, 366 (1). pp. 8-15.

Sahu, Ranjan K and Mohanta, Ojaswini and Pramanick, A K (2012) XPS study on the correlation of magnetic properties and site occupancy of Al doped SrFe12O19. Journal of Alloys and Compounds, 532 . pp. 114-120.

Saray, O and Purcek, G and Mahato, B and Ghosh Chowdhury, S (2012) Texture evolution of IF-steel sheets processed by equal-channel angular sheet extrusion (ECASE). Materials Science Forum, 702-703 . pp. 123-126.

Sarkar, Partha and Mallick, A B and Roy, Rajat K and Panda, A K and Mitra, A (2012) Structural and Giant Magneto-impedance properties of Cr-incorporated Co-Fe-Si-B amorphous microwires. Journal of Magnetism and Magnetic Materials, 324 (8). pp. 1551-1556.

Sarkar, Partha and Roy, Rajat K and Mitra, A and Panda, A K and Churyukanovaa, Margarita and Kaloshkina, Sergey (2012) Effect of Nb and Cr incorporation on the structural and magnetic properties of rapidly quenched FeCoSiB microwires. Journal of Magnetism and Magnetic Materials, 324 (16). pp. 2543-2546.

Sen, S and Panda, A K and Prasad, K (2012) Magnetic and electric behavior of NiFe204-PVDF nanocomposites. Material Science-Poland, 30 . pp. 415-425.

Sharma, Arun Kumar (2012) Application of infrared thermography for gradation and sorting of iron ores. Masters thesis, NIT, Tiruchirapalli.

Sharma, Arun Kumar and Ghosh, Arpita and Das, T K and Joseyphus, R Justin and Palit Sagar, S (2012) To Establish the Feasibility of IR Thermography for Sorting of Iron Ores for Identifying & Rejecting Alumina Rich Ores. In: NDE 2012, 10th -13th December, 2012, New Delhi India.

Sharma, Geetanjali (2012) Comparative Study on Biomimetically Synthesized Ferrofluid at different pH and Concentration. Masters thesis, Utkal University BBSR.

Sheethal, S and Giridharan S Sanjay, N V and Metya, Avijit Kumar and Chacko, E Z and Singh, D K and Chandra, Sanjay and Palit Sagar, S (2012) Evaluation and Optimization of Electromagnetic Stirring (EMS) Parameters for Continuously Cast High Carbon Billet Quality using Ultrasonic C-Scan Imaging. In: National Seminar on NDE 2012, December 10 -12, 2012, Ghaziabad, Delhi.

Sheikh, Lubna (2012) Study of Novel Nanomagnetic Hydroxyapatite as a Potent Biomedical System. Masters thesis, NOU, Orissa.

Shukla, R and Das, Swapan K and Ravi Kumar, B and Ghosh, S K and Kundu, S and Chatterjee, S (2012) An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 43 (12). pp. 4835-4845.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Low Temperature Sensitization on the Orthogonal Surfaces of Prior deferomed AISI 304LN and aged at 673K to 873K (400 A degress C to 600 A degress C. Metallurgical and Materials Transaction A, 43A (3). pp. 986-1003.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Study on sensitization susceptibility and texture of cold rolled AISI 304LN stainless steel. Materials Science Forum, 702-703 . pp. 677-680.

Singh, S and Roy, Rajat K and Ghosh, M and Mitra , A and Panda, A K (2012) Heat Treatment Induced Martensitic Accommodation and Adaptive Anisotropy in Melt Spun Ni55Mn22Ga23 (at.%) ribbons. Journal of Applied Physics, 112(10) .

Sinha, S K (2012) Metal foams - A novel field of metallurgy. Journal of Metallurgy and Materials Science,, 54(3) . pp. 175-185.

Sivaprasad, S (2012) AcSIR Lecture Notes #1: 2 (854) Mechanical Behaviour of Materials. Nil, Jamshedpur. (Unpublished)

Sivaprasad, S (2012) AcSIR Lecture Notes: 2 (854) Mechanical Behaviour of Materials. CSIR-NML, Jamshedpur. (Unpublished)

Sivaprasad, S (2012) Lecture Notes (3) Principal Stress, Plane and Angle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

Sivaprasad, S (2012) Lecture Notes (4) Mohr’s Circle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

T

Tiwari, Ashutosh and Pramanick, A K (2012) Characterization of Zr-Ti-Nb alloys by AFM. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2012) Chlorobutyl elastomer-multiwalled carbon nanotube nanocomposites as effective barrier materials. Journal of Metallurgy and Materials Science, 54(4) . pp. 279-289.

Tudu, Mohan Kherual and Sivaprasad, S (2012) Fracture and deformation behaviour of materials. Training Report (TR). CSIR New Delhi, Jamshedpur. (Unpublished)

V

Varma, Nitin Pratap and Garai, Subhadra and Sinha, Arvind (2012) Synthesis of injectable and cohesive nano hydroxyapatite Scaffolds. Journal of Materials Science: Materials in Medicine, 23 (4). pp. 913-919.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R (2012) Effect of Hot Working on Structure and Tribological Properties of Aluminium Reinforced with Aluminium Oxide Particulates. Journal of Materials Engineering and Performance, 21 (7). pp. 1226-1231.