Items where Division is "Material Science and Technology" and Year is 2005

C

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites. Wear, 258 (5-6). pp. 759-767.

D

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Das, Goutam and Ghosh, Sabita and Sahay, S K (2005) Use of ball indentation technique to determine the change of tensile properties of SS316L steel due to cold rolling. Materials Letters, 59 (18). pp. 2246-2251.

Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Significance of logarithmic averaging of soil resistivity data for underground piplines using impressed current cathodic protection system. Journal of Metallurgy and Materials Science, 47 (3). pp. 169-176.

G

Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2005) Ultrahigh strength hot rotted microalloyed steel: microstructure and properties. Materials Science and Technology, 21 (3). pp. 325-333.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh Chowdhury, S (2005) Development of texture during cold rolling in AA5182 alloy. Scripta Materialia, 52 (2). pp. 99-105.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Guria, Chandan and Verma, Mohan and Gupta, Santosh K and Mehrotra, S P (2005) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm. International Journal of Mineral Processing, 77 (3). pp. 165-185.

H

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-2(Crack closure decomposition). Journal of Metallurgy and Materials Science, 47 (4). pp. 189-197.

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-I (Plasticity zone interactions). Journal of Metallurgy and Materials Science, 47 (3). pp. 129-140.

Harmain, G A (2005) A numerical investigation on constant amplitude loading. Journal of Metallurgy and Materials Science, 47 (2). pp. 103-117.

K

Khanra, A K and Godkhindi, M M and Pathak, L C (2005) Comparative studies on sintering behavior of self-propagating high-temperature synthesized ultra-fine titanium diboride powder. Journal of the American Ceramic Society, 88 (6). pp. 1619-1621.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2005) Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 104 (6). pp. 282-284.

Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160.

M

Mahato, D K and Chaudhary, R K and Srivastava, S C (2005) Dielectric behaviour of spray dried Pb0.98(La1−x/3Nax)0.02(Zr0.53Ti0.47)0.9950O3 system. Journal of Materials Science, 40 (2). pp. 381-386.

US2003000393398 (2005) Process for the production of zirconium boride powder. US6908599.

Mishra, Suman K and Das, Swapan K (2005) Sintering and microstructural behaviour of SHS produced zirconium diboride powder with the addition of C and TiC. Materials Letters, 59 (27). pp. 3467-3470.

Mishra, Suman K and Pathak, L C (2005) Deposition of crystalline C–N film by arc evaporation process. Materials Letters, 59 (27). pp. 3481-3484.

Mitra, A and Panda, A K (2005) Development of nanocrystalline materials for soft-magnetic applications. Transactions of Indian Institute of Metals, 58 (6). pp. 981-991.

N

Narasaiah, N and Chakraborti, P C and Maiti, R and Ray, K K (2005) Fatigue Crack Initiation in an Interstitial Free Steel. ISIJ International, 45 (1). pp. 127-132.

Narasaiah, N and Ray, K K (2005) Small crack formation in a low carbon steel with banded ferrite–pearlite structure. Materials Science and Engineering A, 392 (1-2). pp. 269-277.

P

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Parida, N and Das, Samar and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Ravi Kumar, B and Dobmann, G and Bhattacharya, D K (2005) Magnetic characterization of cold rolled and aged AISI 304 stainless steel. NDT & E International, 38 (8). pp. 674-681.

Panda, A K and Kumari, S and Chattoraj, I and Svec, P and Mitra, A (2005) Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys. Philosophical Magazine, 85 (7). pp. 1835-1845.

Panda, A K and Manimaran, A and Basu, S and Mitra, A and Chattoraj, I (2005) Effect of structural evolution and surface morphological changes on the electrochemical response of an FeNbAlMnCuSiB alloy. Journal of Materials Science, 40 (17). pp. 4579-4584.

Pathak, L C and Mishra, Suman K (2005) A review on the synthesis of Y-Ba-Cu-oxide powder. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 18 (9). R 67-R 89.

R

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Influence of strain-induced phase transformation on the surface crystallographic texture in cold-rolled-and-aged austenitic stainless steel. Metallurgical and Materials Transactions A, 36 (11). pp. 3165-3174.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, Ashok K and Mondal, S and Das, Swapan K and Ramachandrarao, P (2005) Bamboo—A functionally graded composite-correlation between microstructure and mechanical strength. Journal of Materials Science, 40 (19). pp. 5249-5253.

Ray, Ashok K and Singh, S R and Kailath, A J and Roy, P K and Das, Swapan K and Ghosh, R N (2005) Fatigue and creep damage and its correlation with microstructure of a service exposed first stage turbine blade in a power plant. Journal of Metallurgy and Materials Science, 47 (2). pp. 59-69.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2005) Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions. Materials Letters, 59 . pp. 2418-2422.

S

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2005) Studies of phase transformations in Ti-Al-X alloys. HIGH TEMPERATURE MATERIALS AND PROCESSES , 24 (6). pp. 345-358.

Sahoo, K L and Stone, I C (2005) Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al-Fe-Cr-Ti alloys. Philosophical Magazine Letters Online ISSN 1362-3036, 85 (5). pp. 231-245.

Saleem, Sheikh shahid and Nigam, S P (2005) Noise prediction model for Indian traffic conditions using L10 approach. Journal of Metallurgy and Materials Science, 47 (2). pp. 91-101.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Sinha, Arvind and Nayar, S (2005) Design and synthesis of nanosized bioceramic-particles, composites and coating. Transactions Of The Indian Institute Of Metals , 58 (6). pp. 951-955.

Sinha, Arvind and Nayar, S and Nath, B K and Das, D and Mukhopadhyay, P K (2005) Magnetic field induced synthesis and self-assembly of super paramagnetic particles in a protein matrix. Colloids and Surfaces B: Biointerfaces, 43 (1). pp. 7-11.

Subramania, A and Angayarkanni, N and Sathiyapriya, A R and Vasudevan, T (2005) Synthesis and electrochemical characterization of nano-crystalline LiCoO2 powder by a novel sol-gel thermolysis process for Li-ion batteries. Journal of Metallurgy and Materials Science, 47 (2). pp. 85-90.

Sundaresan, S and Albert, S K and Sireesha, M and Swaminathan, J and Kamaraj, M (2005) Stress rutpure behavior of transition joints between modified Kr-Mo steel and 316 L(N) SS. Transactions Of The Indian Institute Of Metals , 58 (2-3). pp. 493-499.