Items where Division is "Material Science and Technology" and Year is 2003

B

Bahadur, Aruna (2003) Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Materials Science and Technology, 19 (12). pp. 1627-1634.

Bahadur, Aruna and Ravi Kumar, B and Ghosh Chowdhury, S (2003) Effect of Thermomechanical Treatment on X-Ray Elastic Constants and Residual Stresses in HSLA-100 Steel. Journal of Nondestructive Evaluation, 22 (2). pp. 53-62.

Bhattacharya, D K (2003) NDT for residual life assessment in Indian industry. Insight, 45 (1). pp. 31-40.

C

Chakrabarti, D M (2003) Customer Feedback in R&D Business. In: UNSPECIFIED.

Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Sinha, Arvind (2003) Behaviour of iron ion in the morphosynthesis of magnetite particles. Materials Transactions , 44 (6). pp. 1124-1127.

Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233.

Chaudhary, S K (2003) An innovative solution for deterioration of railway track. Journal of Metallurgy and Materials Science . pp. 45-53.

D

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2003) Development and validation of ball indentation technique to evaluate the mechanical properties of materials. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 465-475.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2003) Turbine blade failure in a thermal power plant. Engineering Failure Analysis, 10 (1). pp. 85-91.

Das, Goutam and Ray, Ashok K and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of a boiler feed pump rotor shaft. Engineering Failure Analysis, 10 (6). pp. 725-732.

Das, N N and Dash, A and Brahama, G S and Mohapatra, P (2003) Synthesis, characterisation and dissociation of a glycinate bridged trinuclear Co(III)-Cu(II)-Co(III) complex. Inorganic Reaction Mechanisms , 5 (1). pp. 73-77.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

G

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED.

K

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2003) Self-propagating-high-temperature synthesis (SHS) of ultrafine ZrB2 powder. Journal of Materials Science Letters, 22 (17). pp. 1189-1191.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

M

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Belov, D Yu and Mamyan, S (2003) Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process. Metallurgical and Materials Transactions A, 34 (9). pp. 1979-1983.

Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2003) Magnetic properties of melt-spun and annealed Fe62Co9.5Gd3.5Si10B15 alloy. Journal Of Physics D-Applied Physics, 36 (18). pp. 2234-2238.

Mitra, A and Kim, H Y and Shen, B L and Nishiyama, N and Inuue, A (2003) Crystallization and magnetic properties of Fe40Co40Cu0.5Al2Zr9Si4B4.5 and Fe62Co9.5Gd3.5Si10B15 amorphous alloys. Materials Transactions , 44 (8). pp. 1562-1565.

US2002000045033 (2003) Sensing device for the non-destructive evaluation of steel structures or components. US6617847.

Mitra, A and Panda, A K and Singh, Ratnakar and Rao, Venkatesh and Ramachandrarao, P (2003) Magnetic and structural behaviours of nanocrystalline Fe70.8Nb3.7Cu1Al2.7Mn0.7Si13.5B7.6 alloy. Philosophical Magazine, 83 (12). pp. 1495-1509.

Mohanta, Ojaswini and Mitra, A and Chattoraj, I (2003) Reversible magnetic and mechanical response in hydrogenated amorphous Fe73.5Nb3Cu1Si13.5B9 alloys. Journal of Magnetism and Magnetic Materials, 266 (3). pp. 296-301.

Mohanty, O N (2003) Challenge in R&D Management : Tata Steel A Case Study. In: UNSPECIFIED.

Murthy, D S R and Kumar, Vinod and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation and thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

N

Nayar, S and Sinha, Arvind (2003) Protein induced morphosynthesis of calcium carbonate. Journal of Materials Science Letters, 22 (3). pp. 167-170.

P

Panda, A K and Basu, S and Mitra, A (2003) Demagnetisation effect and its correction on the measurement of magnetic hysteresis loop of melt-spun ribbons. Journal of Magnetism and Magnetic Materials, 261 (1-2). pp. 190-195.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5−XBX (X=5, 9, 10, 11.25, 19) alloys. Journal of Magnetism and Magnetic Materials, 260 (1-2). pp. 70-77.

Parida, N and Tarafder, S and Das, Swapan K and Kumar, P and Das, Goutam and Ranganath, V R and Bhattacharya, D K (2003) Failure analysis of coal pulverizer mill shaft. Engineering Failure Analysis, 10 (6). pp. 733-744.

R

Ram, M (2003) Technology Transfer to Small Scale Industries. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 134-137. ISBN 81-87053-57-9

Raposo, V and Vazquez, M and Mitra, A (2003) Torsion dependence of giant magnetoimpedance in amorphous wires. Journal of Magnetism and Magnetic Materials, 254-255 ( ). pp. 179-181.

Ravi Kumar, B and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of helical compression spring in coke oven batteries. Engineering Failure Analysis, 10 (2). pp. 291-296.

Ray, Ashok K and Sahay, S K and Goswami, B (2003) Assessment of service exposed boiler tubes. Engineering Failure Analysis, 10 (6). pp. 645-654.

Ray, Ashok K and Sinha, S K and Tiwari, Y N and Swaminathan, J (2003) Analysis of failed reformer tubes. Engineering Failure Analysis, 10 (3). pp. 351-362.

Roy, Santanu (2003) Interfacing R&D and Marketing: Tacit Knowledge and S &T Manpower Deployment in CSIR, India. In: Synergy of R&D & Marketing. , . NML, Jamshedpur, pp. 12-28. ISBN 81-87053-57-9

S

Sahoo, K L and Das, Swapan K (2003) Effect of magnesium on sliding wear performance of cast Al-8.3Fe-0.8V-0.9Si alloys. Materials Science and Technology, 19 (7). pp. 959-965.

Sahoo, K L and Rao, Venkatesh and Mitra, A (2003) Crystallization kinetics in an amorphous Al-Ni-Mm-Fe alloy. Materials Transactions , 44 (6). pp. 1075-1080.

Saleem, Sheikh shahid and Nigam, S P (2003) Regression analysis for selection of a noise descriptor to accurately predict traffic noise on Indian highways. Journal of Metallurgy and Materials Science, 45 (3). pp. 127-135.

Satyanarayana, N V (2003) Creativity, Innovation and Problem Solving. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 96-110. ISBN 81-87053-57-9

Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Ramachandrarao, P (2003) Self-assembled growth of calcite particles on a tobacco film. Current Science , 84 (11). pp. 1437-1440.

Sinha, Arvind and Nayar, S and Agrawal, A and Bhattacharya, D (2003) Synthesis of nanosized and microporous precipitated hydroxyapatite in synthetic polymers and Biopolymers. Journal Of The American Ceramic Society , 86 (2). pp. 357-359.

Sinha, Arvind and Nayar, S and Murthy, G V S and Joy, P A and Rao, Venkatesh and Ramachandrarao, P (2003) Biomimetic synthesis of superparamagnetic iron oxide particles in proteins. Journal of Materials Research, 18 (6). pp. 1309-1313.

Sinha, I and Mandal, R K (2003) Simulating the effect of glass microstructures on the crystallisation and percolation behaviour of glass-ceramics. Journal of Non-Crystalline Solids, 324 (1-2). pp. 36-49.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Srikanth, S and Gopalakrishna, K and Das, Swapan K and Ravi Kumar, B (2003) Phosphate induced stress corrosion cracking in a waterwall tube from a coal fired boiler. Engineering Failure Analysis, 10 (4). pp. 491-501.

Srikanth, S and Ravi Kumar, B and Das, Swapan K and Gopalakrishna, K and Nandakumar, K and Vijayan, P (2003) Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler. Engineering Failure Analysis, 10 (1). pp. 59-66.

T

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186.

V

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.