Items where Division is "Material Science and Technology" and Year is 2002

C

Chatterjee, S and Bhagat, A N and Gope , N (2002) Development of Semi-Processed Steels for Electrical Lamination Applications at Tata Steel. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur.

Chaudhuri, S P and Mahanti, R K and Sivaramakrishnan, C S and Singh, M P (2002) Physical properties of some thermomechanically processed microalloyed steels. Materials & Design, 23 (5). pp. 489-496.

D

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2002) Failure of a super heater tube. Engineering Failure Analysis, 9 (5). pp. 563-570.

Das, Samar K and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2002) Evolution of microstructure in an ultra-low carbon Cu bearing HSLA forging. Scandinavian Journal Of Metallurgy, 31 (4). pp. 272-280.

G

Ghosh, R N (2002) Superalloy: Processing and Performance. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Ghosh Chowdhury, S and Das, Swapan K and Ravi Kumar, B and Kumar, S and Gottstein, G (2002) Textural development in AISI 316 stainless steel during cold rolling and annealing. Textures of Materials, 408-4 . pp. 1371-1376.

M

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P (2002) Microstructure evolution during sintering of self-propagating high-temperature synthesis produced ZrB2 powder. Journal of Materials Research, 17 (11). pp. 2809-2814.

Mishra, Suman K and Das, Swapan K and Ray, Ajoy K and Ramachandrarao, P (2002) Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self-Propagating High-Temperature Synthesis. Journal of the American Ceramic Society, 85 (11). pp. 2846-2848.

Mishra, Suman K and Pathak, L C (2002) Self-Propagating High-Temperature Synthesis(SHS) of Advanced High Temperature Materials. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Mitra, A and Palit Sagar, S and Manik, N B (2002) Magnetic Barkhausen emission study in heat-treated Fe-Nb-Cu-Si-B alloy. IEEE Transactions on Magnetics, 38 (6). pp. 3669-3674.

Mitra, A and Panda, A K (2002) Giant Magneto-Impedance Behaviour in Ferro-Magnetic Materials. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Mondal, Sudipta and Pathak, L C and Venkateswarlu, K and Das, S K and Ray, Ajoy K (2002) Development and Characterization of Ag-Cu-Ti Alloys for Ceramic Brazing. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Mukhopadhyay, N K and Murthy, G V S (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al–Cu–Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling. Philosophical Magazine Letters Online ISSN 1362-3036, 82 (7). pp. 383-392.

P

Panda, A K and Chattoraj, I and Basu, S and Mitra, A (2002) Influence of Quench Rates on the Properties of Rapidly Solidified FeNbCuSiB Alloy. Bulletin of Material Science, 25 (6). pp. 573-575.

Panda, A K and Mitra, A and Chattoraj, I and Singh, S R and Ramachandrarao, P (2002) Development of Nanocrystalline FeNbCuSib based Alloy for Sensor Application. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedepur.

Pathak, L C (2002) Synthesis of Nano-Crystalline Ceramic powders by Chemical Process. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Pathak, L C and Singh, T B and Das, S and Verma, A K and Ramachandrarao, P (2002) Effect of pH on the combustion synthesis of nano-crystalline alumina powder. Materials Letters, 57 (2). pp. 380-385.

Prasad, P M and Mankhand, T R and Rao, P S P and Prasad, A K J (2002) Kinetics of the direct synthesis of molycarbide by reduction-carburization of molybdenite in the presence of lime. Metallurgical and Materials Transactions B, 33 ( 3). pp. 345-354.

Prasad, Prabha (2002) Effect of Monotonic and Cyclic Loading on the Fracture Behavior of SA 333 Steel. PhD thesis, Indian Institute of Technology Kharagpur.

R

Ray, Ajoy K and Venkateswarlu, K and Chaudhury, S K and Das, S K and Ravi Kumar, B and Pathak, L C (2002) Fabrication of TiN reinforced aluminium metal matrix composites through a powder metallurgical route. Materials Science and Engineering A, 338 (1-2). pp. 160-165.

Ray, Ashok K and Roy, Nilima (2002) Modelling of Elasto-Plastic Deformation and Crack Propagation Studies in Thermal Barrier Coated Superalloys. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Ray, Ashok K and Tiwari, Y N and Sinha, S K and Singh, Raghubir and Chaudhuri, S (2002) Remnant life assessment of service-exposed pendent superheater tubes. Engineering Failure Analysis, 9 (1). pp. 83-92.

S

Sahu, K K (2002) Hydrothermal Synthesis and Microstructural Control of Hematite Particles. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Singh, R J (2002) Utilisation of Waste- A Novel Approach Towards Cleaner Environment. In: Proceedings of Resurgence of Metallic Materials the Current Scenario-ROMM 2002, Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur.

Sinha, Arvind and Agrawal, A and Nayar, S and Das, S K and Ramachandrarao, P (2002) Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol). Morphosynthesis of Calcium Carbonate in Poly(vinylalcohol) , 10 (3). pp. 149-153.

Sinha, I and Mandal, R K (2002) Simulating isothermal crystallisation during phase separation of oxide glasses and the percolation behaviour of these glass-ceramics. Journal of Materials Science, 37 (24). pp. 5215-5221.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Das, Swapan K and Ray, K K (2002) Effect of prestrain on stretch-zone formation during ductile fracture of Cu-strengthened high-strength low-alloy steels. Metallurgical and Materials Transactions A, 33 (12). pp. 3731-3740.

Srivastava, V C and Ghosal, P (2002) Microstructure and phase formation in spray-deposited Al–18%Si–5%Fe–1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

V

Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125.

Venkateswarlu, K and Ray, Ajoy K and Chaudhury, S K and Pathak, L C (2002) Development of Aluminium based Metal Matrix Composites. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM - 2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.