Items where Author is "Sivaramakrishnan, C S "

Article

Sivaramakrishnan, C S and Prabhu, S M (2012) Electrical and thermal analysis of porous non-isothermal bed. Journal of Metallurgy and Materials Science, 54(1) . pp. 63-75.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Effect of processing parameters on physical properties of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 393 (1-2). pp. 196-203.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites. Wear, 258 (5-6). pp. 759-767.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Preparation and thermomechanical properties of stir cast Al-2Mg-11TiO2 (rutile). Bulletin of Materials Science, 27 (6). pp. 517-521.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2004) Tensile and fracture behavior of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 374 (1-2). pp. 184-190.

Chaudhury, S K and Sivaramakrishnan, C S and Panigrahi, S C (2004) A new spray forming technique for the preparation of aluminium rutile (TiO2) ex situ particle composite. Journal of Materials Processing Technology, 145 (3). pp. 385-390.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al–8.3Fe–0.8V–0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Chaudhuri, S P and Mahanti, R K and Sivaramakrishnan, C S and Singh, M P (2002) Physical properties of some thermomechanically processed microalloyed steels. Materials & Design, 23 (5). pp. 489-496.

Govind, and Nair, K S and Mittal, M C and Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (2001) Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy. Materials Science and Engineering A, 304-306 . pp. 520-523.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2001) The effect of Mg treatment on the properties of Al–8.3Fe–0.8V–0.9Si alloy. Journal of Materials Processing Technology, 112 (1). pp. 6-11.

Prodhan, A and Sivaramakrishnan, C S and Chakrabarti, A K (2001) Solidification of aluminum in electric field. Metallurgical and Materials Transactions B, 32 (2). pp. 372-378.

Sinha, S K and Godiwalla, K M and Shaw, D K and Sivaramakrishnan, C S (2001) Fluid flow behaviour in a water model tundish under open, submerged and modified inlet conditions. Scandinavian Journal Of Metallurgy, 30 (2). pp. 103-107.

Sivaramakrishnan, C S (2001) Solidification Processing of aluminium alloys. Journal of Metallurgy and materials Science, 43 (2). pp. 57-66.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Solidification characteristics of the Al-8.3Fe-0.8V-0.9Si alloy. Metallurgical and Materials Transactions A, 31 (6). pp. 1599-1610.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Studies on wear characteristics of Al–Fe–V–Si alloys. Wear, 239 (2). pp. 211-218.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Modification of cast structure in Al-8 center dot 3Fe-0 center dot 8V-0 center dot 9Si alloy by magnesium treatment. Materials Science and Technology, 16 (2). pp. 227-230.

Basu, D K and Singh, M N and Dev, S C and Sivaramakrishnan, C S (2000) Corrosion of silver-containing brazing fillers and contact materials in different conditions. Corrosion Prevention & Control, 47 (3). 77-+.

Bhattamishra, A K and De, P K and Das, S K and Sivaramakrishnan, C S (2000) Environmental effect on cold pressure welded non-ferrous wires. Journal of Metallurgy and materials Science, 42 (1). pp. 47-51.

Vaish, A K and Biswas, P K and Goswami, N G and Sivaramakrishnan, C S and Ramachandrarao, P (2000) Historical perspective of iron in ancient India. Journal of Metallurgy and materials Science, 42 (1). pp. 65-74.

Biswas, P K and Dev, S C and Godiwalla, K M and Sivaramakrishnan, C S (1999) Effect of some design parameters on the suspension characteristics of a mechanically agitated sand–water slurry system. Materials & Design, 20 (5). pp. 253-265.

Vaish, A K and Goswami, N G and Biswas, P K and Minz, R K and Humane, M M and Sivaramakrishnan, C S and Ramachandrarao, P (1999) Ancient iron making in India-historical perspective, technological aspects and future prospects. NML Technical Journal, 40 (4). pp. 183-194.

Godiwalla, K M and Das, Suchandan K and Sivaramakrishnan, C S (1999) Mathematical modelling of electromagnetic phenomenon in aluminium smelting cells. Transactions of the Indian Institute of Metals, 52 (2-3). pp. 103-108.

Chakraborty, S P and Ghosh, S and Sivaramakrishnan, C S (1996) Advance in automotive castings. NML Technical Journal, 38 (3). pp. 113-115.

Ghosh, B N and Lal, Kishori and De, P K and Sivaramakrishnan, C S and Ramachandrarao, P (1996) Development of ferritic stainless steel for catalytic converter. NML Technical Journal, 38 (3). pp. 117-121.

Bhattamishra, A K and Lal, Kishori and Sivaramakrishnan, C S (1996) Effect of Si/Mg ratio on the corrosion behaviour of Al-Mg-Si alloys for automotive applications. NML Technical Journal, 38 (3). pp. 101-106.

Dev, S C and Sivaramakrishnan, C S (1996) An indigenous technology for a silver brazing alloy. Materials & Design, 17 (2). pp. 75-78.

Bodas, M G and Dash, D R and Sivaramakrishnan, C S (1996) Oxidation of iron powder in a fluidized bed reactor. Materials & Design, 17 (3). pp. 167-172.

Sivaramakrishnan, C S and Mohanty, R K and Lal, Kishori (1996) Zinc-aluminium alloys for automobile applications. NML Technical Journal, 38 (3). pp. 123-126.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1995) Simulation of pneumatically agitated metallurgical vessels through water modelling. Scandinavian Journal Of Metallurgy, 24 (2). pp. 81-85.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Simulation of fluid-flow phenomena in continuous-casting multistrand tundish through water modeling. Transactions of the indian institute of metals, 47 (5). pp. 333-337.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Water model simulation of tundish flow under varying conditions. Steel Research, 65 (7). pp. 267-272.

Sinha, A N and Sivaramakrishnan, C S (1994) Failure of work roll of cold-rolling mill. Ironmaking & Steelmaking, 21 (2). pp. 154-157.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Statistical analysis of residence time distribution of fluid elements in continuous casting water model tundish with one side entry. 77th steelmaking conference, 77 ( ). pp. 703-712.

Mahanti, R K and Lal, Kishori and Sinha, A N and Sivaramakrishnan, C S (1993) A novel technique for hyper eutectic aluminum-silicon alloy melt treatment. Materials Transactions JIM, 34 (12). pp. 1207-1211.

Mahanti, R K and Lal, Kishori and Sinha, A N and Sivaramakrishnan, C S (1993) Novel technique for hyper eutectic aluminum-silicon alloy melt treatment. Materials Transactions Jim, 34 (12). pp. 1207-1211.

Sivaramakrishnan, C S and Lal, Kishori and Mahanti, R K (1993) Abatement of intergranular corrosion in zinc-aluminium foundry alloys through flux treatment. Anti-corrosion Methods & Materials, 40 (4). pp. 4-8.

Sinha, S K and Godiwalla, K M and Sivaramakrishnan, C S (1993) Fluid-flow characterization in twin strand continuous-casting tundish water model. Ironmaking & Steelmaking, 20 (6). pp. 485-492.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1993) Thermal stratification phenomena in a 4-strand cc tundish during teeming of steel water model study. ISIJ International, 33 (4). pp. 519-521.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (1992) Thermal-properties of lead and graphite dispersed rheocast aluminum silicon alloys by laser flash technique. Materials Transactions JIM, 33 (9). pp. 811-815.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1992) Fluid-flow in twin strand tundish water model. Transactions of the indian institute of metals, 45 (4). pp. 247-251.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (1992) Studies on Microstructure of Rapidly Solidified Aluminium-Transition metal Alloys with Misch Metal Addition. NML Technical Journal, 34 (1-2). pp. 18-26.

Sivaramakrishnan, C S and Lal, Kishori and Mahanti, R K (1991) Characterization of rapidly solidified structures of Al-6Fe-3mm. Journal of Materials Science, 26 (16). pp. 4369-4374.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S and Jain, K B (1991) Microstructure-property correlation in indigenously produced zinc-aluminum foundry alloys. Materials transactions, 32 (7). pp. 621-625.

Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S and Jain, K B (1991) Quality Improvement of Zn-AI Foundry Alloys through Melt Treatment. NML Technical Journal, 33 (3-4). pp. 3-9.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, Rajendra (1986) Microstructural refinement in degassed aluminum-alloys. Transactions of the Indian Institute of metals, 39 (5). pp. 492-496.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, R (1984) The dispersion of lead and graphite in aluminium alloys for bearing applications. Wear, 96 (2). pp. 121-134.

Sivaramakrishnan, C S and Mahanti, R K (1984) Basics of degassing of aluminium melts. NML Technical Journal, 26 (1-2). pp. 5-10.

Kumar, Rajendra and Sivaramakrishnan, C S (1983) The influence of pseudosurfaces on solidification of aluminum-alloys. Transactions of the Indian Institute of metals, 36 (4). pp. 298-303.

Kumar, Rajendra and Sivaramakrishnan, C S (1983) Thermodynamics and structure of aluminum-alloys. Transactions of the Indian Institute of metals, 36 (4). pp. 253-258.

Das, N K and Mahanti, R K and Sivaramakrishnan, C S and Kumar, Rajendra (1982) Effect of 2-phase solidification on fracture-toughness of aluminum-alloys. Indian Journal of Technology, 20 (11). pp. 434-437.

Sivaramakrishnan, C S and Mahanti, R K (1982) The effect of solute and melt treatment on precipitation behaviour of Al-Cu and Al-Zn-Mg alloys. NML Technical Journal, 24 (3-4). pp. 22-27.

Sivaramakrishnan, C S and Mahanti, R K and Kumar, Rajendra (1982) Grain-refinement of aluminum by nml-pm122. Indian Journal of Technology, 20 (10). pp. 403-406.

Sivaramakrishnan, C S (1981) Modern concepts in solidification and structure of cast iron. NML Technical Journal, 23 (1-2). pp. 11-15.

Sivaramakrishnan, C S and Kumar, Rajendra (1980) Models for metallic solution-liquids. NML Technical Journal, 22 (1-2). pp. 1-8.

Sivaramakrishnan, C S and Kumar, Rajendra (1979) Models for liquid metals-A metallurgical appreciation. NML Technical Journal, 21 (3-4). pp. 21-24.

Sivaramakrishnan, C S (1978) Stability of liquid lead base alloys: Some simple consideration. NML Technical Journal, 20 (3-4). pp. 31-34.

Sivaramakrishnan, C S (1978) Thermodynamic properties of liquid lead tin system by EMF method. NML Technical Journal, 20 (1-2). pp. 20-23.

Sivaramakrishnan, C S and Kumar, Rajendra (1976) Structure of dilute Sn-Fe liquid alloys. Transactions of the Japan Institute of Metals, 17 (6). pp. 378-382.

Kumar, Rajendra and Sivaramakrishnan, C S (1974) Distribution of copper and magnesium between molten aluminum and lead. Transactions of the Japan Institute of Metals, 15 (5). pp. 319-323.

Sivaramakrishnan, C S (1973) Bearing materials-A general appraisal. NML Technical Journal, 159 (3). pp. 69-75.

Kumar, Rajendra and Sivaramakrishnan, C S (1972) Establishment of the Temperature Range of Accidental Overheating of Precipitation Hardened Aluminium-Copper Alloys. NML Technical Journal, 14 (1). pp. 16-23.

Sivaramakrishnan, C S and Chowdhury, K M and Kumar, Rajendra (1971) Impact of melting procedures on foundry technology of aluminium. NML Technical Journal, 13 (1). pp. 1-7.

Book or NML Publication

Vaish, A K and Biswas, P K and Chaudhuri, S P and Humane, M M and Minj, R K and Lakra, B A and Sinhababu, S K and De, P K and Goswami, N G and Sivaramakrishnan, C S and Ramachandrarao, P (2002) Iron making in ancient India - a critical assessment. In: Traditional and innovation in the history of iron making: an Indo European perspective. PAHAR, Nainital, pp. 237-249. ISBN 81-86246-19-3

Conference or Workshop Item

Sivaramakrishnan, C S and Choudhuri, S P (1998) Role of Thermomechanical Treatments on Mechanical Prope-rties, Microstrucures and Corrosion Properties of Micro-alloyed Steels. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Biswas, P K and Dev, S C and Godiwalla, K M and Sivaramakrishnan, C S (1997) Experimental Simulation of Particulate dispersion in Sand-Water Slurry System in Mechanically Agitated Metallurgical Vessel. In: Proceedings of Golden Jubilee International Conference on Recent Advances in Metallurgical Processes Vol-1, 16-19 July 1997, IIS, Bangalore.

Sivaramakrishnan, C S (1995) Physical Metallurgy of Aluminium. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.