Items where Author is "Sivaprasad, S"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 131.

Article

Mukherjee, Shreya and Sivaprasad, S and Tarafder, Soumitra and Bhattacharyya, D and Kar, Sujoy Kumar (2022) Influence of ageing on high temperature tensile deformation of a Ni- based superalloy, HAYNES 282. Journal of Alloys and Compounds, 917 .

Sen, Mainak and Suman, Swati and Mukherjee, Shreya and Banerjee, Trideep and Sivaprasad, S and Tarafder, S and Bhattacharjee, Amit and Kar, Sujoy (2021) Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy. International Journal of Fatigue, 148 (IF-4.369 ). p. 106238.

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064.

Dey, Rima and Tarafder, Soumitra and Bar, H and Sivaprasad, S (2020) Correlating Effect of Temperature on Cyclic Plastic Deformation Behavior with Substructural Developments for Austenitic Stainless Steel. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 480-496.

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11) . pp. 1000-1009.

Barat, K and Sivaprasad, S and Kar, S K and Tarafder, S (2019) Low‐cycle fatigue of IN 718: Effect of waveform. Fatigue & Fracture Of Engineering Materials And Structures . pp. 1-10.

Mukherjee, S and Barat, K and Sivaprasad, S and Tarafder, S and Kar, S K (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions. Materials Science and Engineering: A, 762 . p. 138073.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2019) Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation. Physical Mesomechanics , 22(4) . pp. 340-344.

Dey, R and Das, A and Tarafder, S and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(5) (IF-1.985). pp. 47-51.

Das, A and Tarafder, S and Sivaprasad, S and Chakrabarti, D (2019) Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels. Materials Science and Engineering A, 754 . pp. 348-360.

Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 . pp. 342-353.

Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743.

Barat, K and Ghosh, M and Sivaprasad, S and Kar, S K and Tarafder, S (2018) High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49(10) (IF-1.985). pp. 5211-5226.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2018) A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC. Journal of Materials Engineering and Performance, 27(9) (IF-1.094). pp. 4893-4899.

Dey, R and Tarafder, Soumitra and Sivaprasad, S (2018) Influence of axial and torsional cyclic loading on the fatigue behavior of 304LN stainless steel using solid and hollow specimens. Mechanics of Materials, 122 (IF-2.651). pp. 58-68.

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2018) Comparative assessment of the fracture behaviour of micro-alloyed and API-5L X65 steels in simulated fuel grade ethanol environment. Engineering Fracture Mechanics, 189 (IF-2.151). pp. 1-12.

Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.389). pp. 1-20.

Joseph, O O and Sivaprasad, S and Fayomi, O S I (2017) Comparative study on the effect of NaNO2 in corrosion inhibition of micro-alloyed and API-5L X65 steels in E20 simulated FGE. Energy Procedia, 119 . pp. 953-960.

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) Part A . pp. 415-423.

Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686.

Singh, Pundan K. and Das, Anindya and Sivaprasad, S and Biswas, P and Verma, Rahul K. and Chakrabarti, D (2017) Energy absorption behaviour of different grades of steel sheets using a strain rate dependent constitutive model. Thin-Walled Structures, 111 (IF- 2.829). pp. 9-18.

Datta, A K and Sivaprasad, S and Prasad, P (2017) Free vibration analysis and shape optimization of offshore tubular structures. Journal of Metallurgy and Materials Science, 59(3) . pp. 133-141.

Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Fayomi, O S I (2016) Comparative assessment of the degradation mechanism of micro-alloyed steel in E20 and E80 simulated fuel grade ethanol environments. Technologies and Materials for Renewable Energy, Environment and Sustainabilty: TMREES, 1758 (NON-SCI).

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113.

Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.

Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157.

Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146.

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654).

Datta, A K and Sivaprasad, S and Prasad, P (2016) System approach of modeling of high rise steel structures against earthquake excitations. Journal of Metallurgy and Materials Science, 58(1) (IF-0.04). pp. 25-33.

Datta, A K and Sivaprasad, S and Bar, H N and Halder, N and Prasad, P (2015) Estimation of available in-elastic dissipation energy of high tensile steels against earthquake excitations. Journal of Metallurgy and Materials Science, 57(4) . pp. 197-209.

Arora, Punit and Gupta, Suneel K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2015) Fatigue studies on Carbon-steel tubes under multiaxial loading. Transactions, SMiRT-23, Manchester, United Kingdom, August 10-14, 2015, Division III (Applied Computation Simulation and Animation) . pp. 1-13.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

Barat, K and Metya, A and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2015) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101.

Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206.

Karmakar, A and Sivaprasad, S and Nath, S K and Misra, R D K and Chakrabarti, D (2014) Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel. Metallurgical and Materials Transactions A, 45A(5) (IF-1.730). pp. 2466-2479.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Karmakar, A and Sivaprasad, S and Kundu, S and Chakrabarti, D (2014) Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Metallurgical and Materials Transactions A, 45A(4) (IF-1.730). pp. 1659-1664.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Kar, Sujoy and Suman, Swati and Sivaprasad, S and Chaudhuri, Atanu and Bhattacharjee, A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy,Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A, 610 (IF-2.409). pp. 171-180.

Roy, Arijit and Manna, I and Tarafder, S and Sivaprasad, S and Paswan, S and Chattoraj, I (2013) Hydrogen enhanced fatigue crack growth in an HSLA steel. Materials Science and Engineering A, 588 (IF-2.108). pp. 86-96.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Ghosh, Arpita and Sivaprasad, S and Bhattacharjee, A and Kar, S (2013) Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 568 (IF-2.108). pp. 61-67.

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99.

Krishna, K Gopala and Sivaprasad, S and Sankara Narayanan, T S N and Kumar, K C Hari (2012) Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling. Corrosion Science, 60 . pp. 82-89.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. Journal of Materials Science, 47 (11). pp. 4660-4672.

Ray, A and Sivaprasad, S and Chakrabarti, D (2012) A critical grain size concept to predict the impact transition temperature of Ti-microalloyed steels. International of Fracture, 173(2) . pp. 215-222.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & fracture of engineering materials & structures, 35 (2). pp. 108-113.

Krishna, K Gopala and Sivaprasad, S and Venkateswarlu, K and Kumar, K C Hari (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135.

Gopalakrishna, K and Sivaprasad, S and Venkateswarlu, K and Hari Kumar, K C (2012) Microstructural evolution and aging behavior of cryorolled Al-4Zn-2Mg alloy. Materials Science and Engineering A, 535 (IF-2.003). pp. 129-135.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Key issues in cyclic plastic deformation: experimentation. Mechanics of Materials, 43 (11). pp. 705-720.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation behavior in SA333 Gr. 6 C-Mn steel. Materials Science and Engineering A, 528 (24). pp. 7341-7349.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation and damage in 304LN stainless steel. Materials Science and Engineering A, 528 (15). pp. 4873-4882.

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Connection between deformation-induced dislocation substructures and martensite formation in stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 91 (10). pp. 664-675.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel. Materials Science and Engineering A, 528 (27). pp. 7909-7914.

Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 .

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theoretical and Applied Fracture Mechanics, 54 (1). pp. 63-70.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, Vivek and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87(8) . pp. 464-469.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) True stress control asymmetric cyclic plastic behavior in SA333 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 440-446.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, V and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behaviour of SA 333 Gr.6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 464-469.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, Mita and Tarafder, S (2010) Simulation of cyclic plastic deformation response in SA333 C–Mn steel by a kinematic hardening model. Computational Materials Science, 48 (3). pp. 662-671.

Narasaiah, N and Tarafder, S and Sivaprasad, S (2010) Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel. Materials Science and Engineering: A, 527 (9). pp. 2408-2411.

Ray, K K and Dutta, K and Sivaprasad, S and Tarafder, S (2010) Fatigue damage of AISI 304 LN stainless steel: Role of mean stress. Procedia Engineering, 2 (1). pp. 1805-1813.

Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157.

Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials, 401 . pp. 17-24.

Ghosh, Swati and Kain, V and Ray, A and Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization. Metallurgical and Materials Transactions A, 40 (12). pp. 2838-2949.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Crack Tip Damage Mechanism under Monotonic and Cyclic Loading Conditions. Key Engineering Materials , 417-418 (8). pp. 105-108.

Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Monotonic vis-à-vis cyclic fracture behaviour of AISI 304LN stainless steel. Engineering Fracture Mechanics, 76 (12). pp. 1822-1832.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2008) Correspondence of fracture surface features with mechanical properties in 304LN stainless steel. Materials Science and Engineering: A, 496 (1-2). pp. 98-105.

Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683.

Roy, H and Parida, N and Sivaprasad, S and Tarafder, S and Ray, K K (2008) Acoustic emissions during fracture toughness tests of steels exhibiting varying ductility. Materials Science and Engineering: A, 486 (1-2). pp. 562-571.

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293.

Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791.

Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182.

Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260.

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Sivaprasad, S and Narang, S K and Singh, Raghubir (2006) Failure of high pressure ammonia line in a fertilizer plant – A case study. Engineering Failure Analysis, 13 (6). pp. 867-875.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S and Nasipuri, M (2005) Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel. Zeitschrift für Metallkunde, 96 (8). pp. 924-932.

Tarafder, Mita and Dey, Swati and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2004) Initiation fracture toughness of HSLA steel through automatic measurement of stretch zone. Materials Science and Technology, 20 (12). pp. 1531-1537.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2004) Modelling ductile fracture behaviour from deformation parameters in HSLA steels. Fatigue & Fracture of Engineering Materials & Structures, 27 (10). pp. 897-909.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Das, Swapan K and Ray, K K (2002) Effect of prestrain on stretch-zone formation during ductile fracture of Cu-strengthened high-strength low-alloy steels. Metallurgical and Materials Transactions A, 33 (12). pp. 3731-3740.

Ray, Ajoy K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. Engineering Failure Analysis , 21 (1-2). pp. 109-121.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh, Sabita and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. High Temperature Materials and Processes, 21 (1-2). pp. 109-121.

Sivaprasad, S and Tarafder, S and Das, Swapan K and Ranganath, V R and Ray, K K (2001) The role of stereology in estimation of ductile fracture toughness of structural materials. Image Analysis in Materials and Life Sciences . pp. 86-95.

Sivaprasad, S and Tarafder, S and Tarafder, Mita and Ray, K K (2000) An alternative method of decreasing ΔK FCGR testing. International Journal of Fatigue, 22 (7). pp. 593-600.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Fatigue crack growth studies on Cu-strengthened HSLA steels in Air and in simulated sea water. Transaction of the Indian Institute of Metals, 53 (3). pp. 333-339.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201.

Parida, N and Sivaprasad, S and Tarafder, S and Ranganath, V R and Bhattacharya, D K (1999) Acoustic emission: A novel technique for the study of fracture micro-mechanisms. Journal of non destructive evaluation, 19 (3). pp. 51-55.

Book or NML Publication

Sahu, J K and Swaminathan, J and Sivaprasad, S and Ray, Ajoy K and Tarafder, S and Chaudhuri, S and Ghosh, R N (2008) Use of expert system software for life monitoring of power plant components. In: Remaining Life Assessment of aged Components in Thermal Power Plants & Petrochemical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 169-181. ISBN 81-87053-73-1

Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91.

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S (2006) A Novel Technique for Extracting Stretch Zone Features from Fractographs. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006, B. ( 2T3). Springer, Netherlands, pp. 145-146. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online)

Conference or Workshop Item

Datta, A K and Sivaprasad, S and Prasad, P (2015) Control of Earthquake Resistant High Rise Steel Frame Structures. In: International Seminar on 3rd Annual International Conference on Architecture and Civil Engineering (ACE 2015), 13-14 April 2015, Singapore.

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India.

Sivaprasad, S (2012) Lecture Notes (3) Principal Stress, Plane and Angle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

Sivaprasad, S (2012) Lecture Notes (4) Mohr’s Circle. In: AcSIR , October, 2012, CSIR-NML. (Unpublished)

Singh, P K and Arora, Punit and Bhasin, V and Vaze, K K and Pukazhendi, D M and Gandhi, P and Raghava, G and Sivaprasad, S and Tarafder, S (2011) Fatigue studies on stainless steel piping materials and components: Indian AHWR. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India.

Sivaprasad, S and Paul, Surajit K and Tarafder, S and Gupta, Suneel K and Bhasin, Vivek (2011) Cyclic plastic deformation behaviour of PHT piping materials - an experimental investigation. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .

Arora, Punit and Gupta, Suneel K and Bhasin, V and Vaze, KK and Sivaprasad, S and Tarafder, S (2011) Multiaxial fatigue studies on carbon steel piping material of Indian PHWRs. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India .

Tarafder, S and Sivaprasad, S (2009) Component Integrity Evaluation. In: Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Other

Sivaprasad, S (2012) AcSIR Lecture Notes #1: 2 (854) Mechanical Behaviour of Materials. Nil, Jamshedpur. (Unpublished)

Sivaprasad, S (2012) AcSIR Lecture Notes: 2 (854) Mechanical Behaviour of Materials. CSIR-NML, Jamshedpur. (Unpublished)

Project Reports

Tudu, Mohan Kherual and Sivaprasad, S (2012) Fracture and deformation behaviour of materials. Training Report (TR). CSIR New Delhi, Jamshedpur. (Unpublished)

Dutta, Anupama and Sivaprasad, S (2012) Study of Mechanical Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Submitted)

Banerjee, Arunima and Sivaprasad, S (2012) Fracture and Deformation Behaviour of Materials. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Soupramanien, C and Paul, K K and Sivaprasad, S and Tarafder, S and Narasaiah, N (2011) Design and Development of Loading Fixture for Mixed Mode I/II Fracture Studies. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Roy, Nilima and Ghosh, R N and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2008) Software development for Critical Assessment of High Temperature Engineering components. Other (TMP). CSIR-NML, Jamshdpur. (Submitted)

Sivaprasad, S and Ghosh, M and Das, Swapan K and Ghosh Chowdhury, S and Tarafder, S (2007) Evolution of Deformation-Induced Martensite during Fatigue Deformation of AISI 304LN Stainless Steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Sivaprasad, S and Singh, S R and Ghosh, R N (2007) Failure Analysis of LP turbine free standing blade. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sahu, J K and Singh, S R and Das, Samar and Sivaprasad, S and Tarafder, S and Ghosh, R N (2006) Deformation mechanism in a single phase austenitic and ferrito-austenitic stainless steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Tarafder, Mita and Tarafder, S and Dash, Byomkesh and Dey, Swati and Sivaprasad, S and Das, Swapan K (2006) Modelling of Crack-tip Blunting using Finite Element Method (FEM) (GAP-0088). Grant in Aid (GAP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur.

This list was generated on Sat Oct 1 00:46:03 2022 IST.