Items where Author is "Singh, Raghuvir"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 60.

Meena, L K and Madan, M and Chaudhari, G P and Singh, Raghuvir (2024) Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen. Transactions of The Indian Institute of Metals .

Meena, L K and Gorja, S R and Bhardwaj, A and Singh, Raghuvir (2024) Service Domains of 13Cr Martensitic Stainless Steels: A Review of State-of-Art Knowledge vis-à-vis ANSI/NACE MR0175/ISO 15156. Transactions of The Indian Institute of Metals .

Meena, L K and Seshagiri, R and Singh, Raghuvir (2023) Corrosion behavior of strontium-modified Al-12Si cast alloys in flowing and stagnant chloride-containing media. Journal of Alloys and Compounds, 962 .

Singh, Raghuvir (2022) Integrity of Additively Manufactured Alloys and Component to Environmental Degradation. Journal of Materials Engineering and Performance .

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Singh, Swarnima and Tiwari, S K and Singh, Raghuvir (2020) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, 36(12): Special Issue: Laser . pp. 1285-1293.

Singh, Charu and Meena, L K and Tiwari, S K and Singh, Raghuvir (2018) Establishing Environment Friendly Surface Treatment for AZ91 Magnesium Alloy for Subsequent Electroless Nickel Plating. Journal of The Electrochemical Society (JES), 165(2) (IF-3.259). C71-C85.

Sivakumar, B and Pathak, L C and Singh, Raghuvir (2017) Role of surface roughness on corrosion and fretting corrosion behaviour of commercially pure titanium in Ringer's solution for bio-implant application. Applied Surface Science, 401 (IF-3.387). pp. 385-398.

Singh, Raghuvir and Das, Goutam and Mahato, B and Singh, P K (2017) Aging Degradation of Austenitic Stainless Steel Weld Probed by Electrochemical Method and Impact Toughness Evaluation. Metallurgical and materials transactions a-physical metallurgy and materials science, 48A(3) (IF-1.874). pp. 1064-1077.

Singh, S and Sribalaji, M and Wasekar, N P and Joshii, H and Sundararajan, G and Singh, Raghuvir and Keshri , A K (2016) Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings. Applied Surface Science, 364 (IF-3.387 ). pp. 264-272.

Sivakumar, B and Singh, Raghuvir and Pathak, L C (2015) Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringer's solution for bioimplant applications. Materials Science & Engineering C-Materials for Biological Applications, 48 (IF-2.736). pp. 243-255.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2013) Influence of SiO, Substitution on Corrosion Behavior of Sol-gel TiO,Coating on Mild Steel. IIM Metal News, 16(5) . pp. 1-4.

Singh, Raghuvir and Kumar, Mukesh and Ghosh, M and Das, Goutam and Singh, P K and Chattoraj, I (2013) Intergranular Corrosion Behavior of 304LN Stainless Steel Heat Treated at 623 K (350 degrees C). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials and Materials Science, 44A (IF-1.627). pp. 173-187.

Singh, Raghuvir and Kumar, Mukesh and Kumar , Deepak and Mishra, Suman K (2012) Erosion and Corrosion Behavior of Laser Cladded Stainless Steels with Tungsten Carbide. Journal of Materials Engineering and Performance, 21(11) (0.855 (SCI)). pp. 2274-2282.

Tiwari, S K and Singh, Raghuvir (2012) Ceramic coatings by sol-gel method for corrosion protection of mild steel. In: National Congress on Corrosion Control, 23 – 25 August 2012, Kolkata.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Low Temperature Sensitization on the Orthogonal Surfaces of Prior deferomed AISI 304LN and aged at 673K to 873K (400 A degress C to 600 A degress C. Metallurgical and Materials Transaction A, 43A (3). pp. 986-1003.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Singh, Raghuvir and Ghosh Chowdhury, S and Das, Goutam and Singh, P K and Chattoraj, I (2012) Study on sensitization susceptibility and texture of cold rolled AISI 304LN stainless steel. Materials Science Forum, 702-703 . pp. 677-680.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Mahato, B (2011) Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes. Engineering Failure Analysis, 18 (8). pp. 2211-2221.

Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Singh, Raghuvir (2011) Influence of Processing on Texture, Grain Boundary Structure and Corrosion Behaviour of Austenitic Stainless Steels. Steel Tech, 5 (4). pp. 43-57.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajnikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Singh, Raghuvir (2011) Different Forms of Corrosion in Industries. In: lndustrial Corrosion and Protection in Coastal & Other Environments, Feb - 2011, HIT.

Tiwari, S K and Sahu, Ranjan K and Pramanick, A K and Singh, Raghuvir (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. Surface and Coatings Technology, 205 . pp. 4960-4967.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

Tiwari, S K and Adhikary, Jhuma and Singh, T B and Singh, Raghuvir (2009) Preparation and characterization of sol–gel derived yttria doped zirconia coatings on AISI 316L. Thin Solid Films, 517 (16). pp. 4502-4508.

Singh, Raghuvir and Das, Goutam and Singh, P K and Chattoraj, I (2009) Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN. Metallurgical and Materials Transactions A, 40 (5). pp. 1219-1234.

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I (2008) Modification of Sensitization Resistance of AISI 304L Stainless Steel through Changes in Grain Size and Grain Boundary Character Distributions. Metallurgical and Materials Transactions A, 39 (10). pp. 2504-2512.

Singh, Raghuvir (2008) Influence of cold rolling on sensitization and intergranular stress corrosion cracking of AISI 304 aged at 500 °C. Journal of Materials Processing Technology, 206 (1-3). pp. 286-293.

Ghosh Chowdhury, S and Singh, Raghuvir (2008) The influence of recrystallized structure and texture on the sensitization behaviour of a stable austenitic stainless steel (AISI 316L). Scripta Materialia, 58 (12). pp. 1102-1105.

Singh, Raghuvir and Ghosh Chowdhury, S and Tiwari, S K and Dahotre, N B (2008) Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science: Materials in Medicine, 19 (3). pp. 1363-1369.

Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai.

Ravi Kumar, B and Mahato, B and Singh, Raghuvir (2007) Influence of Cold-Worked Structure on Electrochemical Properties of Austenitic Stainless Steels. Metallurgical and Materials Transactions A, 38 (9). pp. 2085-2094.

Singh, Raghuvir and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and De, P K and Chattoraj, I (2007) The importance of grain size relative to grain boundary character on the sensitization of metastable austenitic stainless steel. Scripta Materialia, 57 (3). pp. 185-188.

Singh, Raghuvir and Dahotre, N B (2007) Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science-Materials in Medicine, 18 (5). pp. 725-751.

Tiwari, S K and Mishra, T and Gunjan, M K and Bhattacharyya, A S and Singh, T B and Singh, Raghuvir (2007) Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201 (16-17). pp. 7582-7588.

Singh, T B and Bhattamishra, A K and Tiwari, S K and Singh, Raghuvir and Bhattacharjee, S (2007) Enhancement of Surface properties of Metal substrates by Electroless Nickel Coating. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, Swapan K and Ravi Kumar, B and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir (2007) Corrosion evaluation and monitoring practices. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 48-67.

Singh, T B and Singh, Raghuvir and Mandhyan, A K (2007) Corrosion protection of steel using waste oils. Journal of Metallurgy and Materials Science, 49 (1). pp. 51-58.

Tiwari, S K and Singh, Raghuvir and Mishra, T and Das, Swapan K (2006) Sol-Gel Coatings on 316L for Surface properties Enhancement. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Singh, Raghuvir and Martin, M and Dahotre, N B (2005) Influence of laser surface modification on corrosion behavior of stainless steel 316L and Ti-6Al-4V in simulated biofluid. Surface Engineering, 21 (4). pp. 297-306.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Singh, Raghuvir (2003) The application of an electrochemical technique to determine the porosity of electroless nickel coatings produced in hypophosphite baths. Anti-corrosion Methods & Materials, 50 (2). pp. 121-128.

Singh, Raghuvir and Singh, A K (2002) In-plant corrosion test on special stainless steels in bleach plant of paper industry. Indian Journal of Chemical Technology, 9 (2). pp. 141-147.

Singh, Raghuvir and Gaur, B and Singh, A K (2001) Impact of Filtrate Recycling on Corrosion of Stainless Steels in Hypochlorite Solutions. Journal of Electrochemical Society of India, 50 (1). pp. 21-26.

Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Gaur, B and Singh, Raghuvir and Singh, A K (2000) Corrosion of stainless steels in chlorination washer of Indian paper industry. Journal of Metallurgy and materials Science, 42 (2). pp. 113-119.

Singh, Raghuvir and Gaur, B and Singh, A K (1999) Corrosion protection of stainless-steel in chlorinated solutions by electrochemical technique. NML Technical Journal, 40 (3). pp. 127-133.

Singh, Raghuvir and Singh, M N (1998) Tape coatings: A review. NML Technical Journal, 40 (4). pp. 123-129.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Singh, Raghuvir and Chaudhuri, S (1997) Remaining life assessment of service exposed reactor and distillation column materials used in a petrochemical industry. In: Recent Advances in Metallurgical Processes - Vol I, 16-19 July 1997, I I S, Banglore.

This list was generated on Thu Mar 28 15:01:39 2024 IST.