Items where Author is "Singh, R"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 32.

Article

Pradhan, S K and Jena, P S M and Chaithanya, P V S and Singh, R (2024) Enhancement of Molten Salt Corrosion Resistance of Ni-Based Superalloy Through Adding Inhibitor. Transactions of The Indian Institute of Metals .

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Singh, Charu and Tiwari, S K and Singh, R (2019) Effect of carbonate and phosphate conversion pretreatments and optimization on corrosion behaviour of subsequent electroless nickel coating on AZ91 alloy. Applied Surface Science, 483 . pp. 334-354.

Singh, Charu and Tiwari, S K and Singh, R (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Sinha, P and Chakravarty, S and Singh, R and Singh, P K and Murthy, G V S (2019) Magnetization study of the sensitization in SS304LN. Materials Research Bulletin, 109 . pp. 149-154.

Chalavadi, G and Singh, R (2019) Theoretical aspects of conceptual multi-property mineral separator. Separation Science and Technology, 54(18) (IF-1.354). pp. 3154-3163.

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.246). pp. 219-230.

Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, L K and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.

Chalavadi, G and Singh, R K and Singh, R and Sharma, Mamta and Rath, R K and Mukherjee, A K (2018) Development of Dry Beneficiation Flow Sheet for Fine Coking Coal. International Journal of Coal Preparation and Utilization (IF-1.05). pp. 1-14.

Bose, S and Pathak, L C and Singh, R (2018) Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application. Applied Surface Science, 433 (IF-3.387). pp. 1158-1174.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Sivakumar, B and Pathak, L C and Singh, R (2018) Fretting corrosion response of boride coated titanium in Ringer's solution for bio-implant use: Elucidation of degradation mechanism. Tribology International, 127 (IF-3.517). pp. 219-230.

Singh, R and Tiwari, S K (2016) Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels. Lasers in Engineering, 35(1-4) (IF-0.214). pp. 63-74.

Sinha, N and Singh, R (2014) Beneficiation and purification of a low grade and finely disseminated graphite ore. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 15-22.

Bhattacharyya, P and Singh, R and Kumar, Vinod and Chattoraj, U S and Bhattacharyya, K K and Roychaudhury, A (2007) Studies on Efficacy of Multi Gravity Seperator for Beneficiation of Indian Coal Fines. Mineral Processing Technology . pp. 1-5.

Mahato, R Raman and Bhattamishra, A K and Singh, R and Jayakrishnan, P (2001) Corrosion behaviour of painted HSLA panels in chloride environment – a comparative study of different paints. Anti-Corrosion Methods and Materials, 48 (3). pp. 188-194.

Mathew, M D and Rao, K B S and Mannan, S L and Paknikar, K and Singh, R (2000) Recovery of creep properties of alloy 625 after long term service. Creep and Fracture Of Engineering Materials and Structures, 171 (1). pp. 537-543.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Chaudhuri, S and Singh, R (2000) Residual life prediction of service exposed main steam pipe of boilers in a thermal power plant. Engineering Failure Analysis, 7 (5). pp. 359-376.

Ray, A K and Tiwari, Y N and Sinha, R K and Roy, S K and Singh, R and Chaudhuri, S (2000) Mechanical Property Evaluation and Remaining Life Assessment of Service - Exposed Steam Pipe of Boilers in : Thermal Power Plant. High Temperature Materials and Process, 20 (1). pp. 1-12.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433.

Ray, Ashok K and Tiwari, Y N and Singh, R and Tarafder, S (2000) Prediction of remaining life of a FCCU reactor plate. Engineering Failure Analysis, 7 (2). pp. 75-86.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Singh, R and Banerjee, S (1990) Morphological and compositional changes of the carbides in a ferritic steel after long term service exposure. Scripta Metallurgica et Materialia, 24 (6). pp. 1093-1098.

Ghosh, R N and Singh, R and Kumar, R (1985) An analysis of tertiary creep in Cr---1 Mo steel. Scripta Metallurgica, 19 (7). pp. 801-804.

Book or NML Publication

Meena, L K and Sinha, A K and Seshagiri, R and Singh, R (2022) Effects of Strontium Addition on Corrosion Properties of Al-12Si Alloy. In: Recent Trends in Electrochemical Science and Technology. Springer Proceedings in Materials, 15 . Springer, Singapore, pp. 35-52. ISBN 978-981-16-7553-9

Conference or Workshop Item

Rath, R K and Singh, R and Bhattacharyya, K K (2011) Processing of Coal Waste by Enhanced Gravity Seperation and Froth Flotation. In: Proceedings of International Conference on Coal and Coke, April 7-8, 2011, National Metallurgical Laboratory, Jamshedpur.

Bhattacharrya, P and Nayak, B and Singh, R and Maulik, S C (2005) Studies on Beach Placers of Kerala Coast. In: International Seminar on Mineral Processing Technology (MPT-2005), January 6-8, 2005, Dhanbad.

Singh, R and Banerjee, B and Srivastava, J P (2004) Effects of Process Parameters on Selective Flotation of Lead-Zinc Ore. In: International Seminar on Mineral Processing Technology (MPT-2004), February 19-21, 2004, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Prasad, P and Singh, R (1995) Microstructural Studies in failed Samples. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

Project Reports

Murthy, H P S and Singh, R (1949) A Survey of Refractory Industry in Eastern India. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur.

This list was generated on Thu Mar 28 16:14:15 2024 IST.