Items where Author is "Singh, D D N"

Article

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2022) Role of phosphorus as micro alloying element and its effect on corrosion characteristics of steel rebars in concrete environment. Scientific Reports, 12(1) .

Singh, J K and Paswan, S and Saha, D and Pandya, Achal and Singh, D D N (2021) Role of air pollutant for deterioration of Taj Mahal by identifying corrosion products on surface of metals. International journal of environmental science and technology .

Paswan, S and Singh, J K and Singh, D D N (2020) Effect of lead alloying on corrosion characteristics of galvanized coatings exposed in atmosphere, simulated laboratory and a service environment. Surfaces and Interfaces, 21 . p. 100752.

Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Singh, D D N (2020) Corrosion characteristics of vanadium micro-alloyed steel reinforcement bars exposed in concrete environments and industrially polluted atmosphere. Cement and Concrete Composites, 113(4) .

Hussain, R R and Singh, J K and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Bhattacharya, C and Pathania, R. S. and Singh, D D N (2018) Effect of Reinforcing Bar Microstructure on Passive Film Exposed to Simulated Concrete Pore Solution. Aci materials journal, 115(2) . pp. 181-190.

Pandya, Achal and Saha, D and Singh, J K and Paswan, S and Singh, D D N (2017) Effect of Environmental Pollution on Corrosion Characteristics of 3003 Aluminium Alloy Exposed in Different Parts of India. Transactions of the Indian Institute of Metals, 70(6) (IF-0.533). pp. 1607-1620.

Al-Negheimish, Abdulaziz and Alhozaimy , Abdulrahman and Hussain, R R and Singh, J K and Singh, D D N (2017) Pitting Susceptibility of Concrete Reinforcing Steel Bars Having Manganese Sulfide Inclusions. ACI Materials Journal, 114(3) (IF-1.183). pp. 441-451.

Hussain, R R and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, J K and Singh, D D N (2016) Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars. ACI Materials Journal, 113(5) (IF-1.183). pp. 579-588.

Hussain, Raja Rizwan and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Singh, D D N (2014) Time-dependent variation of the electrochemical impedance for thermo-mechanically treated versus plain low alloy steel rebars in contact with simulated concrete pore solution. Construction and Building Materials, 73 (IF-2.265). pp. 283-288.

Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Negheimish, Abdulaziz and Al-Zaid, Rajeh and Singh, D D N (2014) Effect of Simulated Concrete Pore Solution Chemistry, Chloride Ions, and Temperature on Passive Layer Formed on Steel Reinforcement. ACI Materials Journal, 111/4 (IF-1.123). pp. 411-421.

Al-Negheimish, Abdulaziz and Alhozaimy, Abdulrahman and Hussain, Raja Rizwan and Al-Zaid, Rajeh and Singh, J K and Singh, D D N (2014) Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions. Corrosion, 70(1) (IF-2.908). pp. 74-86.

Singh, D D N and Venugopalan, T (2013) Understanding the Corrosion and Remedial Measures to Control the Deterioration of Reinforcement Steel Bars by Modification in Their Chemistry and Application of Surface Coatings. Transactions of the Indian Institute of Metals, 66(5-6) (IF-0.215). pp. 677-687.

Bansal, Rajesh and Singh, J K and Singh, D D N (2013) Deleterious effects of nicotine containing dentifrices on human saliva and teeth: A novel study. Indian Journal of Dentistry, 4(1) . pp. 22-28.

Singh, J K and Singh, D D N (2012) Studies on defects in galvanized coating on steel wire. Indian Journal of Chemical Technology, 19 . pp. 361-365.

Singh, J K and Singh, D D N (2012) The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH. Corrosion Science, 56 . pp. 129-142.

Singh, D D N and Pandeya, A (2010) Role of Self-Assembled Monolayer of 1,2,3-Benzotriazole in Protecting Copper Artifacts Covered with Sulfide Film. Corrosion, 66 (11). 115002-115002-11.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 68 (1-2). pp. 62-69.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 67 (2). pp. 129-136.

Pandya, Achal and Singh, D D N (2010) The Delhi Iron Pillar: A study of the Corrosion Formed in Areas of Surface Deformation. Metal 2010 : Charleston, South Carolina, USA . pp. 1-6.

Singh, D D N and Ghosh, Rita (2008) Molybdenum–phosphorus compounds based passivator to control corrosion of hot dip galvanized coated rebars exposed in simulated concrete pore solution. Surface and Coatings Technology, 202 (19). pp. 4687-4701.

Singh, D D N and Yadav, Shyamjeet and Saha, Jayant K (2008) Role of climatic conditions on corrosion characteristics of structural steels. Corrosion Science, 50 (1). pp. 93-110.

Singh, D D N and Yadav, Shyamjeet (2008) Role of tannic acid based rust converter on formation of passive film on zinc rich coating exposed in simulated concrete pore solution. Surface and Coatings Technology, 202 (8). pp. 1526-1542.

Ghosh, Rita and Singh, D D N (2007) Kinetics, mechanism and characterisation of passive film formed on hot dip galvanized coating exposed in simulated concrete pore solution. Surface and Coatings Technology, 201 (16-17). pp. 7346-7359.

Singh, D D N and Ghosh, Rita (2006) Electroless nickel–phosphorus coatings to protect steel reinforcement bars from chloride induced corrosion. Surface and Coatings Technology, 201 (1-2). pp. 90-101.

Singh, D D N and Ghosh, Rita (2005) Unexpected deterioration of fusion-bonded epoxy-coated rebars embedded in chloride-contaminated concrete environments. Corrosion Science, 61 (8). pp. 815-829.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Role of fluoride in accelerating corrosion and pitting of steel in concrete environments. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 391-397.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Comparing the corrosion resistance of thermo-mechanically treated rebars of low alloy and mild steels embedded in chloride-contaminated concrete mortars. Corrosion Prevention & Control , 50 (2). pp. 94-103.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, D D N and Ghosh, Rita (2003) Corrosion resistance performance of fusion bonded epoxy coated rebars used as reinforcement in concrete structures. Journal of Metallurgy and materials Science, 45 (2). pp. 73-83.

Singh, D D N and Dey, M and Singh, V (2002) Role of buffering and complexing agents in zinc plating chloride baths on corrosion resistance of produced coatings. Corrosion, 58 (11). pp. 971-980.

Singh, D D N and Ghosh, Rita and Singh, B K (2002) Fluoride induced corrosion of steel rebars in contact with alkaline solutions, cement slurry and concrete mortars. Corrosion Science, 44 (8). pp. 1713-1735.

Chakrabarti, S and Jha, G and Singh, D D N (2002) Evaluation of Corrosion Behaviour of Corrugated Galvanised Sheets. Tata Search, 2002 . pp. 1-8.

Singh, D D N and Chakrabarti, S and Jha, G (2000) Latest Trends in Corrosion Resistant Hot Dip Galvanized Coatings. Galvanizing . pp. 1-7.

Singh, D D N (2000) Current Developments in Improving the Corrosion Resistance of Zinc Coated Steel Sheets. Proceedings of Coil-Coated Steel Sheets, New Delhi, 2000 . pp. 1-19.

Singh, D D N and Gaur, B and Dey, A K and Singh, B K and Dey, M and Ghosh, Rita (1999) Interrelating electrochemical properties, salt-spray resistance and industrial performance of white-rust controlling passivators for galvanised surfaces. NML Technical Journal, 40 (2). pp. 63-76.

Singh, D D N (1998) Awareness of corrosion problems can save millions: Economical impact of corrosion inhibitors. Transactions of the indian institute of metals, 51 (5). pp. 291-301.

Singh, D D N and Dey, M (1998) Chloride based bright zinc plating baths: A comparative evaluation. NML Technical Journal, 40 (1). pp. 1-10.

Singh, D D N and Gaur, B and Singh, B K and Ghosh, Rita (1998) Effective inhibition of corrosion of steel in phosphoric acid solution. NML Technical Journal, 40 (2). pp. 35-44.

Singh, D D N and Ghosh, Rita and Singh, B K (1998) Low Alloyed Thermo Mechanically Treated (TMT) Steel Rebars: An Ideal Solution for Reinforcement Corrosion. Steel in Construction, 1 (2). pp. 1-11.

Singh, D D N and Gaur, B and Ghosh, Rita and Singh, B K (1998) Role of corrosion inhibitors or grain boundary corrosion control of Cr-Mn-Cu stainless steel in pickling solution. NML Technical Journal, 40 (3). pp. 77-86.

Jana, R K and Singh, D D N and Roy, S K (1997) Some physico-chemical characteristics of central Indian Ocean nodules and their effects on extractive metallurgical schemes. NML Technical Journal, 39 (2). pp. 93-103.

Jana, R K and Singh, D D N and Roy, S K (1996) Direct electrowinning of valuable metals from sea nodules using aqueous chloride bath. Transactions of the indian institute of metals, 49 (6). pp. 761-767.

Gaur, B and Singh, T B and Singh, D D N (1996) Beneficial role of chloride ions during pickling of steel in sulfuric acid. Corrosion, 52 (2). pp. 154-159.

Singh, D D N and Dey, A K and Singh, B K (1996) Evaluation of corrosion resistance of galvanised coatings produced on steel surface through different routes. NML Technical Journal, 38 (4). pp. 151-160.

Singh, D D N (1996) Inhibition mechanism, testing and industrial applications of corrosion inhibitors. NML Technical Journal, 38 (1). pp. 1-23.

Singh, T B and Dey, A K and Gaur, B and Singh, D D N (1995) Are corrosion, hydrogen absorption and mechanical strength of steel exposed to inhibited acid solution interrelated? Anti-corrosion Methods & Materials, 42 (6). pp. 19-22.

Jana, R K and Singh, D D N and Roy, S K (1995) Alcohol-modified hydrochloric acid leaching of sea nodules. Hydrometallurgy, 38 (3). pp. 289-298.

Singh, D D N and Gaur, B (1995) Improving the inhibitive performance of dibenzyl sulfoxide for pickling of steel in sulfuric-acid. Corrosion, 51 (8). pp. 593-601.

Patty, B B and Das, C R and Singh, D D N (1995) Role of hydrogen promoters on corrosion and hydrogenation of mild-steel in aqueous and methanolic hydrochloric-acid solutions. Corrosion , 51 (7). pp. 537-543.

Singh, D D N and Singh, T B and Gaur, B (1995) The role of metal cations in improving the inhibitive performance of hexamine on the corrosion of steel in hydrochloric acid solution. Corrosion Science, 37 (6). pp. 1005-1019.

Jana, R K and Singh, D D N and Roy , S K (1994) Electrowinning of metals using buffered sodium-chloride electrolyte during electrochlorination of sea nodules. Hydrometallurgy, 36 (3). pp. 295-314.

Jana, R K and Singh, D D N and Roy, S K (1993) Hydrochloric-acid leaching of sea nodules with methanol and ethanol addition. Materials Transactions JIM, 34 (7). pp. 593-598.

Singh, D D N and Dey , A K (1993) Synergistic effects of inorganic and organic cations on inhibitive performance of propargyl alcohol on steel dissolution in boiling hydrochloric-acid solution. Corrosion , 49 (7). pp. 594-600.

Jana, R K and Singh, D D N and Roy, S K (1993) Electrochlorination of sea nodules to recover copper, nickel and cobalt. Hydrometallurgy, 32 (1). pp. 21-38.

Singh, D D N and Dey, A K and Sharma, D S (1993) An improved process for the pickling of copper and copper based alloys. NML Technical Journal, 35 (1-2). pp. 6-12.

Dey, A K and Singh, D D N (1993) Role of alcohols on dissolution of 70/30 brass in HNO3-H2SO4 bath. NML Technical Journal, 35 (3-4). pp. 39-43.

Patty, B B and Singh, D D N (1992) Solvents role on hcl-induced corrosion of mild-steel - its control by propargyl alcohol and metal-cations. Corrosion, 48 (6). pp. 442-446.

Chatterjee, P and Singh, D D N (1991) H2S Corrosion control of steel by using pyridine compounds. Anti-Corrosion Methods and Materials, 38 (1). pp. 4-10.

Pati, B B and Chatterjee, P and Singh, T B and Singh, D D N (1990) Effect of propargyl alcohol on corrosion and hydrogenation of steel in hydrochloric-acid solution. Corrosion, 46 (5). pp. 354-359.

Singh, D D N and Singh, T B and Chatterjee, P and Patty, B B and Mukherjee, K P (1990) Chemical corrosion control for sour crude oil pipelines. Corrosion prevention & control, 37(2) . pp. 37-41.

Singh, D D N and Dey, A K (1989) Corrosion behaviour of 304 stainless steel in dioxane. NML Technical Journal, 31 (1-4). pp. 24-27.

Singh, D D N and Banerjee, M K (1986) Corrosion behavior of nickel in methanol. Corrosion Science, 42 (3). pp. 156-161.

Singh, D D N (1985) Passivation behavior of titanium-6al-4v alloy in phosphoric-acid solution. Journal of the electrochemical society (JES), 132 (2). pp. 378-381.

Singh, D D N and Banerjee, M K (1984) Vapour phase corrosion inhibitors—a review. Anti-Corrosion Methods and Materials, 31(6) . pp. 4-22.

Singh, D D N and Banerjee, M K and Nag, P S (1982) Inhibition and polarization studies of titanium in sulphuric and hydrochloric acid solutions. NML Technical Journal, 24 (3-4). pp. 31-35.

Book or NML Publication

Singh, D D N (2007) Corrosion inhibitors. In: Training programme on industrial corrosion: evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 119-134.

Singh, D D N (1997) Localized corrosion and component failures: Causes, mechanism and remedial measures. In: Failure analysis: Proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 169-211.

Conference or Workshop Item

Saha, Jayanta and Singh, D D N and Nair, Premraj (2012) Performance Evaluation of Field Exposed Painted Constructional Steels. In: Corcon International Corrosion Conference and Expo - 2012, September 26-29, 2012, Goa, India.

Singh, D D N and Ghosh, Rita (2005) Protective Coatings for Steel Bars in Reinforced Structures. In: 3' International Symposium on Surface Protective Coatings, November, 14-16, NML, Jamshedpur.

Singh, D D N and Ghosh, Rita (2001) Corrosion Resistance Performance of Fusion Bonded Epoxy Coated Rebars. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N and Dey, Mahuya (2001) Studies on Performance of Galvannealed Coatings and Other Type of Zinc Coatings. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N and Singh, B K and Ghosh, Rita (2001) Reliable evaluation techniques for localized corrosion damages. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001, NML Jamshedpur, India.

Singh, D D N and Dey, A K and Khan, I (1998) Passivation of galvanized surfaces to improve their corrosion resistance. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India, .

Singh, D D N (1998) Role of Concrete and Steel Surface on Performance of Structures. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur.

Singh, D D N and Dey, A K and Dey, M and Singh, B K (1998) Corrosion characteristics of HSLA steels in sea water. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, D D N and Singh, B K (1998) Effect of mixed cations on phosphate coating of steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Singh, D D N (1997) Pickling, Rinsing and Fluxing of Steels before Galvanizing. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1997) Post Treatment of Galvanized Coating to Improve Corrosion Resistance. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1995) Various forms of water side Corrosion: Causes & Prevention. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Project Reports

Sridhar, G and Ghosh Chowdhury, S and Singh, S R and Parida , N and Singh, D D N and Das, Swapan K and Roy, P K and Das , Goutam and Gunjan, M K (2006) Failure Analysis of LP Turbine Blade of NTPC-Tanda. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)