Items where Author is "Satendra, Kumar"

Article

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N and Chu, P K (2013) Effect of thermal oxidation on the corrosion resistance of Ti6Al4V alloy in hydrochloric and nitric acid medium. Materials and Corrosion / Werkstoffe und Korrosion, 64(10) (IF-1.173). pp. 902-907.

Balusamy, T and Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti–Mo alloys. Materials and Corrosion, 62 (1.173 (SCI)). pp. 803-806.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Effect of Thermal Oxidation on Corrosion Resistance of Commercially Pure Titanium in Acid Medium. Journal of Materials Engineering and Performance, 21 (6). pp. 900-906.

Shanmuganathan, P and Lakshmipathiraj, P and Satendra, Kumar and Sumathy, A and Srikanth, S (2012) Stability of copper smelter slag in sea water. Environmental Progress & Sustainable Energy, 31(1) . pp. 68-76.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2012) Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications. Journal of Coatings Technology and Research, 9 (4). pp. 495-502.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Comparison of the fretting corrosion behaviour of Ti-6Al-4V alloy and CP-Ti IN ringer’s solution. Tribology - Materials, Interfaces and Surfaces, 5(4) (1.553). pp. 158-164.

Narasimhan, B R V and Satendra, Kumar and Sankara Narayanan, T S N (2011) Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore. Environmental Chemistry Letters, 9 (2). pp. 243-250.

Jamesh, M and Satendra, Kumar and Sankara Narayanan, T S N (2011) Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS. Corrosion Science, 53 . pp. 645-654.

Balusamy, T and Satendra , Kumar and Sankara Narayanan, T S N (2011) Electrochemical behaviour of surface modified AISI 304 grade stainless steel in ringer’s solution. Transactions of the Indian Institute of Metals, 64 (4-5). pp. 507-511.

Satendra, Kumar and Sankara Narayanan, T S N (2011) Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium. Journal of Applied Electrochemistry, 41 . pp. 123-127.

Sivakumar, B and Satendra, Kumar and Sankara Narayanan, T S N (2011) Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions. Wear, 270 . pp. 317-324.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Surface modification of CP-TI to improve the fretting corrosion resistance: Thermal oxidation vs. anodizing. Materials Science and Engineering: C, 30 (6). pp. 921-927.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications. Tribology International, 43 (7). pp. 1245-1252.

Satendra, Kumar and Sankara Narayanan, T S N and Saravana Kumar, S (2010) Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application. Corrosion Science, 52 (5). pp. 1721-1727.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution. Corrosion Science, 52 (3). pp. 711-721.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh (2010) Corrigendum to “Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time” [Mater. Sci. Eng., 29 (2009) 1942–1949]. Materials Science and Engineering: C, 30 (2). p. 330.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Satendra, Kumar and Sivakumar, B and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting-corrosion mapping of CP-Ti in Ringer's solution. Wear, 268 (11-12). pp. 1537-1541.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2009) Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time. Materials Science and Engineering C, 29 (6). pp. 1942-1949.

Satendra, Kumar and Sankara Narayanan, T S N (2009) Electrochemical characterization of Beta-Ti alloy in Ringer’s solution for implant application. Journal of Alloys and Compounds, 479 (1-2). pp. 699-703.

Satendra, Kumar and Sankara Narayanan, T S N (2008) Corrosion behaviour of Ti–15Mo alloy for dental implant applications. Journal of Dentistry, 36 (7). pp. 500-507.

Satendra, Kumar and Sankara Narayanan, T S N and Manimaran, A and Suresh Kumar, M (2007) Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution. Materials Chemistry and Physics, 106 (1). pp. 134-141.

Satendra, Kumar and Sankara Narayanan, T S N and Suresh Kumar, M and Manimaran, A (2006) Dezincification of Brass in Sulfide Polluted Sodium Chloride Medium: Evaluation of the Effectiveness of 2-Mercaptobenzothiazole. International Journal of Electrochemical Science, 1 (8). pp. 456-469.

Satendra, Kumar and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922.

Project Reports

Sankara Narayanan, T S N and Satendra, Kumar (2011) Evaluation of corrosion performance of reinforcement steel. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2011) Studies on the Electrochemical Behaviour of Ti-Mo Alloys In Fluoride Medium to assess their Suitability for Dental Implant Applications (OLP-0073). Exploratory (OLP). NML, NML, Chennai Centre. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar (2008) Analysis of heavy metal present in blood samples. Sponsored (SSP). NML, Chennai Centre, Jamshedpur. (Submitted)

Thesis

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.