Items where Author is "Goswami, M C"

Article

Singh, C B and Gupta, R N and Vaish, A K and Goswami, M C (2015) Reduction kinetics of low grade iron ore - revealing the efficacy of ancient iron making process. Journal of Metallurgy and Materials Science, 57(3) . pp. 127-134.

Bhagat, R P and Nayak, B and Bhattacharyya, K K and Goswami, M C (2014) Mineralogy of iron ore pellet and its correlation with crushing strength. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 117-123.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Dey, Shobhana and Mohanta, M K and Goswami, M C and Pani, Santosh (2014) Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making. Journal of Minerals and Materials Characterization and Engineering, 2 . pp. 513-521.

Joseph, Kitheri and Kutty, K V Govindan and Goswami, M C and Rao, P R Vasudeva (2014) Viscosity and crystallization mechanism of cesium loaded iron phosphate glasses. Thermochimica Acta, 587 (IF-2.105). pp. 42-47.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D (2013) Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines. Steel Research International, 84(11) (IF-0.493). pp. 1115-1125.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Pal, J and Ghosh, S and Goswami, M C and Singh, D P and Kumar, Manoj and Minj, R K and Upadhyay, A K (2007) Role of direct reduced iron fines in nitrogen removal from electric arc furnace steel. Steel Research International, 78 (8). pp. 588-594.

Bhagat, R P and Chattoraj, U S and Goswami, M C and Singh, D P and Sil, S K (2007) Effect of size parameters of mix ingredients on the porosity and reduction characteristics of sinter. Steel Research International, 78 (6). pp. 451-454.

Bhagat, R P and Sil, S K and Chattoraj, U S and Goswami, M C and Singh, D P and Das, B K (2006) Pot Sintering Studies for Improvement in Reducibility and RDI Values of Sinter. Steel India . pp. 127-134.

Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40.

Singh, Ratnakar and Goswami, M C and Vaish, A K and Das, S K and Goel , R P (2005) NML's Contribution to Development of Indian Steel Industry. Motif . pp. 1-4.

Vaish, A K and Goswami, M C and Biswas, P K and Humane, M M and Ramachandrarao, P (2004) Thermodynamic and Kinetic Aspects of Ancient Iron Making Technology in India. Journal of Rural Technology, 1 (4). pp. 156-162.

Pal, J and Goswami, M C (2004) Control of silicon in hot metal. Journal of Metallurgy and materials Science, 46 (1). pp. 23-38.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Pal, J and Goswami, M C and Singh, D P (2003) On The Desulphurisation Of Assam Coal With Coke Oven Gas. Transactions of the Indian Institute of Metals, 56 (3). pp. 239-242.

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Goswami, M C and Pal, J (2002) Role of coke quality in improving blast furnace performance. Journal of Metallurgy and materials Science., 44 (2). pp. 91-102.

Goswami, M C and Biswas, P K and Vaish, A K (2001) Kinetics of reduction of low grade iron ore by charcoal. Journal of Metallurgy and materials Science, 43 (3). pp. 181-188.

Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211.

Prakash, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Prabhakar, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C and Das, Swapan K and Sinha, A N and Mishra, K K (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Prabhakar, S and Goswami, M C and Mahapatra, A K S and Ghosh, K C and Das, S K and Sinha, A N and Mishra, K K (2000) Morphology and reduction kinetics of fluxed iron ore pellets. Ironmaking & Steelmaking, 27 (3). pp. 194-201.

Goswami, M C and Prakash, S (1999) Smelting Reduction Kinetics of Fluxed Composite Reduced Iron Pellets(FCIP). Tool & Alloy Steels, 32 ( ). pp. 11-19.

Goswami, M C and Prakash, S and Sarkar, S B (1999) Kinetics of smelting reduction of fluxed composite iron ore pellets. Steel Research, 70 (2). pp. 41-46.

Goswami, M C (1999) On the strength and reduction characteristics of fluxed composite iron ore pellets. NML Technical Journal, 40 (4). pp. 163-170.

Goswami, M C and Prakash, S and Sarkar, B (1998) A reacting system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Prakash, S and Sarkar, S B (1998) A reading system cold-model foaming study simulating in-bath smelting. Scandinavian Journal Of Metallurgy, 27 (3). pp. 97-102.

Goswami, M C and Singh, S D and Vaish, A K (1998) Smelting reduction of lean pyrite cynder of complex mineralogy for the production of low silicon ferro-alloys. Tool & Alloy Steels, 32 (3). pp. 9-14.

Goswami, M C and Prakash, S and Sinha, S N and Tiru, P (1998) Experimental study on the foaming phenomena in a non-reacting system. NML Technical Journal, 40 (2). pp. 51-56.

Goswami, M C (1997) Interrelation between kinetics of reduction and volume change during formation of directly reduced iron rod. Steel Research, 68 (12). pp. 507-511.

Goswami, M C and Mahapatra, A K S and Prakash, S (1997) Briquetting of waste coke fines for industrial utilization. NML Technical Journal, 39 (1). pp. 31-38.

Mahapatra, A K S and Goswami, M C and Prakash, S and Singh, K K (1996) Quality of coke for high PCR blast furnace process-Some images. NML Technical Journal, 38 (4). pp. 161-167.

Mahapatra, A K S and Goswami, M C and Gupta, K N (1991) Evaluation of physico-chemical characteristics of some Indian iron ores and sinters. NML Technical Journal, 33 (1). pp. 9-16.

Mahapatra, A K S and Goswami, M C and Gupta, K N (1991) Evaluation of Physico Chemical Characteristics of some Indian Iron Ores and Sinters. NML Technical Journal, 33 (1-2). pp. 9-16.

Goswami, M C and Sinha, A K Mahapatra and Gupta, K N (1987) Iron ore sinter as iron burden in Indian blast furnaces. NML Technical Journal, 29 (1-4). pp. 33-38.

Conference or Workshop Item

Dey, Shobhana and Mohanta, M K and Mohanty , Sunati and Goswami , M C and Bhattacharyya, K K (2011) Amenability to Processing of Maganiferous Iron Ore. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Chakraborty, Debarun and Goswami, M C and Bhagat, R P (2010) Effect of process variables on sintering indices in relation to high LOI hematite ore fines of Gua mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vaish, A K and Nayak, B and Goswami, M C and Singh, S D and Singh, D P and Gupta, R C (2010) Magnetite ore of nagaland—its mineralogy and reduction kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Goswami, M C (2007) Physical and Physico - Chemical Characterization of Iron Ore Agglomerates. In: Processing of Iron Ore, Nov. 28-Dec. 01, 2007, NML, Jamshedpur.

Bandopadhyay, A and Goswami, M C and Kumar, Sanjay (2005) Improvement of environmental performance of integrated steel sector through process integration & optimisation measures and innovative waste management practices. In: Emomami-2005, 2005, IATES, Bhubaneswar.

Project Reports

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Bhadraiah, B Veera and Goswami, M C (2012) Characterization of Pellets made of Iron Fines from Noamundi Mines. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Ramu, Ch. and Goswami, M C (2012) Kinetics of Gaseous Reduction of Iron Ore. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)