Items where Author is "Chatterjee, S"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 40.

Article

Karar, D and Chatterjee, S and Pramanick, A K and Bandyopadhyay, N R and Ray, Mallar (2021) Electrical transport through pelletized tablet of silicene like quasi 2D crystalline silicon. Materials Letters, 303 .

Dutta, Siuli and Panda, A K and Mitra, Amitava and Chatterjee, S and Roy, Rajat K (2020) Microstructural evolution, recovery and recrystallization kinetics of isothermally annealed ultra low carbon steel. Materials Research Express, 7(1) (IF-1.449). 016554.

Dutta, S and Rajnikanth, V and Panda, A K and Mitra, A and Chatterjee, S and Roy, R K (2019) Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. Journal of Materials Engineering and Performance , 28(4) . pp. 2228-2236.

Siddique, A B and Pramanick, A K and Chatterjee, S and Ray, M (2018) Amorphous Carbon Dots and their Remarkable Ability to Detect 2,4,6-Trinitrophenol. Scientific Reports, 8 (IF-4.525). p. 9770.

Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.

Pattanayak, S and Dey, Swati and Chatterjee, S and Ghosh Chowdhury, S and Datta, S (2015) Computational intelligence based designing of microalloyed pipeline steel. Computational Materials Science, 104 (IF-1.879). pp. 60-68.

Ray, Ajoy K and Chatterjee, S and Singh, J K and Bapari, H (2015) Thermal Exfoliation of Natural Cellulosic Material for Graphene Synthesis. Journal of Materials Engineering and Performance, 24(1) (IF-0.981). pp. 80-84.

Ghosh, C and Chatterjee, S (2012) Microstructural evolution at the interface of bond coat and steel substrate during galvanization. Journal of Metallurgy and Materials Science, 54(2) . pp. 149-153.

Shukla, R and Das, Swapan K and Ravi Kumar, B and Ghosh, S K and Kundu, S and Chatterjee, S (2012) An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 43 (12). pp. 4835-4845.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2010) Effect of La content on the room temperature ageing behavior of Al90−xNi6La4+x (x = 0–3) metallic glasses. Materials Science and Engineering: A, 527 (6). pp. 1339-1342.

Sahu, Rina and Chatterjee, S and Sahoo, K L (2010) Mechanical Properties and Nanocrystallization Behavior of Al-Ni-La Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41 (4). pp. 861-869.

Sengupta, B and Chatterjee, S and Rott, U and Kauffman, H and Bandopadhyay, A and DeGroot, W and Nag, N K and Carbonell-Barrachina, A A and Mukherjee, Surojit (2009) A simple chemical free arsenic removal method for community water supply – A case study from West Bengal, India. Environmental Pollution, 157 (12). pp. 3351-3353.

Sahu, Rina and Gangopadhyay, A K and Kelton, K F and Chatterjee, S and Sahoo, K L (2009) Room temperature ageing of Al–Ni–RE (RE = La, Gd, Er) metallic glasses. Scripta Materialia, 61 (6). pp. 588-591.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2009) Effect of La content on the room temperature ageing behavior of Al90-xNi6La4+x (x = 0 to 3) metallic glasses. Materials Science and Engineering A, 527 (6). pp. 1339-1342.

Das, Swapan K and Chatterjee, S and Tarafder, S (2009) Effect of microstructures on deformation behaviour of high-strength low-alloy steel. Journal of Materials Science, 44 (4). pp. 1094-1100.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2008) Ageing behavior of a Cu-bearing ultrahigh strength steel. Materials Science and Engineering A, 486 (1-2). pp. 152-157.

Chatterjee, S and Bandopadhyay, A and Sengupta, Bhaskar (2008) Arsenic Contamination of Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 1-19.

Sahoo, K L and Sahu, Rina and Ghosh, M and Chatterjee, S (2008) Studies on crystallization behaviour and mechanical properties of Al-Ni-La metallic glasses. Bulletin of Materials Science, 31 (3). pp. 433-439.

Chatterjee, S and Bandopadhyay, A and Datta, A K and Kumar, S and Sengupta, B (2008) Technologies for Mitigation of Arsenic from Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 31-53.

Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078.

Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182.

Das, Swapan K and Chatterjee, S and Tarafder, S (2006) Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel. Materials Science and Technology, 22 (12). pp. 1409-1414.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

Ghosh, Arindam and Shukla, R and Das, S and Chatterjee, S (2006) The structure and properties of a thermo-mechanically processed low carbon high strength steel. Steel Research International , 77 (4). pp. 276-283.

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160.

Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2005) Ultrahigh strength hot rotted microalloyed steel: microstructure and properties. Materials Science and Technology, 21 (3). pp. 325-333.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55.

Das, Samar and Ghosh, Arindam and Kundu, Sukumar and Chatterjee, S (2004) A study on structure and properties of a hot forged HSLA-80 steel. Transactions of the Indian Institute of Metals, 57 (1). pp. 25-33.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57.

Das, Samar K and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2002) Evolution of microstructure in an ultra-low carbon Cu bearing HSLA forging. Scandinavian Journal Of Metallurgy, 31 (4). pp. 272-280.

Conference or Workshop Item

Siddique, A B and Singh, V P and Chatterjee, S and Pramanick, A K and Ray, M (2018) Facile synthesis and versatile applications of amorphous carbon dot. In: International Conference on Functional Nanomaterials (IC-FNM), Sept 28-29, 2016, Howrah, INDIA.

Mandal, S and Chakraborty, A and Ghosh, S K and Chatterjee, S (2013) Thermomechanically Controlled Processed Low Carbon Ultra Strength Steel: Microstructure and Mechanical Properties. In: Proceedings of the International Conference on Science and technology of Ironmaking and steel making, March 8-10, 2006, NML, Chennai.

Chatterjee, S and Bhagat, A N and Gope , N (2002) Development of Semi-Processed Steels for Electrical Lamination Applications at Tata Steel. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur.

This list was generated on Fri Mar 29 19:12:22 2024 IST.