Items where Year is 2018
Number of items: 71.
Akcil, Ata and Akhmadiyeva, Nazym and Abdulvaliyev, Rinat and Abhilash, and Meshram, Pratima (2018) Overview On Extraction and Separation of Rare Earth Elements from Red Mud: Focus on Scandium. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.219). pp. 145-151.
Anand, Kunjan Kumar and Mahato, B and Haase, C and Kumar, A and Chowdhury, Sandip Ghosh (2018) Correlation of defect density with texture evolution during cold rolling of a Twinning-Induced Plasticity (TWIP) steel. Materials Science and Engineering A, 711 (IF-3.094). pp. 69-77.
Badhirappan, G P and Nallasivam, V and Varadarajan, M and Leobeemrao, V P and Bose , S and Venugopal, E and Rajendran, S and Angleo, P C (2018) Phase Competition Induced Bio-Electrochemical Resistance and Bio-Compatibility Effect in Nanocrystalline Zr-x-Cu100-x Thin Films. Journal of nano science and nanotechnology , 18(7) (IF-1.483). pp. 4534-4543.
Bakshi, S Das and Sinha, D and Ghosh Chowdhury, S and Mahashabde, V V (2018) Surface and sub-surface damage of 0.20 wt% C-martensite during three-body abrasion. Wear, 394–395 (IF-2.531). pp. 217-227.
Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.389). pp. 1-20.
Bose, S and Pathak, L C and Singh, R (2018) Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application. Applied Surface Science, 433 (IF-3.387). pp. 1158-1174.
Cao, B and Shaeffer, M and Cadel, D and Ramesh, K.T. and Prasad, Sanjay (2018) An Analysis of Strengthening Mechanisms and Rate-Dependence in a High Strength Aluminum Alloy. Journal of Dynamic Behavior of Materials, 4(1) . pp. 6-17.
Chalavadi, G and Singh, R K and Singh, R and Sharma, Mamta and Rath, R K and Mukherjee, A K (2018) Development of Dry Beneficiation Flow Sheet for Fine Coking Coal. International Journal of Coal Preparation and Utilization (IF-1.05). pp. 1-14.
Chidambaram, S and Ashok, K and Karthik, V and Venkatakrishnan, P G (2018) Microbiological corrosion of ASTM SA105 carbon steel pipe for industrial fire water usage. IOP Conference Series: Materials Science and Engineering, 314 (IF 0.32).
Das, Arpan (2018) Enigma of dislocation patterning due to slip in fatigued austenite. International Journal of Damage Mechanics, 27(2) (IF-1.783). pp. 218-237.
Dey, R and Tarafder, Soumitra and Sivaprasad, S (2018) Influence of axial and torsional cyclic loading on the fatigue behavior of 304LN stainless steel using solid and hollow specimens. Mechanics of Materials, 122 (IF-2.651). pp. 58-68.
Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research . (In Press)
Director, NML (2018) Annual Report 2017-2018. CSIR- National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273
Dutta, Deblina and Kumari, Archana and Panda, Rekha and Jha, Soni and Gupta, Divika and Goel, Sudha and Jha, Manis K (2018) Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries. Separation and Purification Technology, 200 (IF-3.359). pp. 327-334.
Dutta, Deblina and Panda, Rekha and Jha, Manis K and Goel, Sudha (2018) Recovery of Manganese from Scrap Batteries of Mobile Phones. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_16. The Minerals, Metals & Materials Society 2018, pp. 175-183.
Dutta, Madhulika and Khare, Puja and Chakravarty, S and Saikia, Durlov and Saikia, Binoy K (2018) Physico-chemical and elemental investigation of aqueous leaching of high sulfur coal and mine overburden from Ledo coalfield of Northeast India. International Journal of Coal Science & Technology . pp. 1-17.
Ghosh, Rachit and Sagar, S P and Kumar, Anil and Gupta, S K and Kumar, Sanjay (2018) Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser. Journal of Building Engineering, 16 . pp. 39-44.
Guguloth, K and Mitra, Rahul and Chowdhury, Sandip Ghosh and Swaminathan, J (2018) Mechanism of creep deformation with evolution of microstructure and texture of Zr-2.5Nb alloy. Materials Science and Engineering: A, 721 (IF-3.094). pp. 286-302.
Gupta, S K and Pandey, K N and Kumar, Rajneesh (2018) Artificial intelligence-based modelling and multi-objective optimization of friction stir welding of dissimilar AA5083-O and AA6063-T6 aluminium alloys. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(4) (IF-1.625). pp. 333-342.
Gupta, S K and Pandey, K N and Kumar, Rajneesh (2018) Multi-objective optimization of friction stir welding process parameters for joining of dissimilar AA5083/AA6063 aluminum alloys using hybrid approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(4) (IF-1.625). pp. 343-353.
Hussain, R R and Singh, J K and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Bhattacharya, C and Pathania, R. S. and Singh, D D N (2018) Effect of Reinforcing Bar Microstructure on Passive Film Exposed to Simulated Concrete Pore Solution. Aci materials journal, 115(2) . pp. 181-190.
Jena, P S M and Sahu, J K and Rai, R K and Das, S K and Singh, R K (2018) Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron. Wear, 406 (IF-2.531). pp. 140-148.
Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2018) Comparative assessment of the fracture behaviour of micro-alloyed and API-5L X65 steels in simulated fuel grade ethanol environment. Engineering Fracture Mechanics, 189 (IF-2.151). pp. 1-12.
Kamaraj, A and Saravana Kumar, S and Rajaguru, M (2018) State of the Art Control Measures for Aluminium Fade and SEN Clogging during Steelmaking Operations. IOP Conference Series: Materials Science and Engineering, 314 (IF-0.32).
Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).
Kumar, S and Djobo, J N Y and Kumar, A and Kumar, S (2018) Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement. European Journal of Environmental and Civil Engineering (IF-0.897). pp. 1-16.
Kumar, Sunil (2018) Graphene Engendered aluminium crystal growth and mechanical properties of its composite: An atomistic investigation. Materials Chemistry and Physics, 201 (IF-2.084). pp. 41-48.
Kumar, Sunil (2018) Spreading and orientation of silver nano-drop over a flat graphene substrate: An atomistic investigation. Carbon, 138 (IF-6.337). pp. 26-41.
Kumar, Sunil and Das, Suchandan K (2018) Characterization of mechanical properties and nano-porous structure of Aluminium-Magnesium alloy during multi-axial tensile deformation: An atomistic investigation. Journal of Alloys and Compounds, 740 (IF-3.133). pp. 626-638.
Kumar, Sunil and Das, Suchandan K and Pattanayek, S K (2018) Evolution of nanostructure and mechanical properties of silver nano-particle in the confined region between graphene sheets: An atomistic investigation. Computational Materials Science, 152 (2.292). pp. 393-407.
Kumar, Sunil and Pattanayek, Sudip K. (2018) Semi-flexible polymer engendered aggregation/dispersion of fullerene (C60) nano-particles: An atomistic investigation. Chemical Physics Letters, 701 (1.815). pp. 22-29.
Kumari, Aarti and Sinha, Manish K and Pramanik, Swati and Sahu, S K (2018) Recovery of rare earths from spent NdFeB magnets of wind turbine: Leaching and kinetic aspects. Waste Management, 75 (IF-4.030). pp. 486-498.
Kumari, Archana and Jha, Manis K and Pathak, D D (2018) Review on the Processes for the Recovery of Rare Earth Metals (REMs)from Secondary Resources. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_5. The Minerals, Metals & Materials Society 2018, pp. 53-65.
Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2018) Processes developed for the separation of europium (Eu) from various resources. Separation & Purification Reviews - (formerly Separation and Purification Methods) (IF-6.077). pp. 1-31.
Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2018) Extraction of metals from spent lithium ion batteries: role of acid, reductant and process intensification in recycling. Indian Journal of Chemical Technology . (In Press)
Meshram, Pratima and Ghosh, Anirban and Ramamurthy, Y and Pandey, B D and Abhilash, and Torem, M L (2018) Removal of Cr(VI) from mine effluents by ion exchange resins-comparative study of Amberlite IRA 400 And IRA 900. Russian Journal of Nonferrous Metals . (In Press)
Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2018) Nonlinear Lamb wave mixing for assessing localized deformation during creep. NDT & E International, 98 (IF-2.781). pp. 89-94.
Mishra, D and Sahu, K K and Agrawal, A (2018) Process integration for material synthesis from a deactivated catalyst: Studies on the interaction of metal ions between two immiscible phases. Journal of Hazardous Materials, 344 (IF-6.065). pp. 169-178.
Munda, Parikshit and Husain, M M and Rajnikanth, V and Metya, A K (2018) Evolution of Microstructure During Short-term Overheating Failure of a Boiler Water Wall Tube Made of Carbon Steel. Journal of Failure Analysis and Prevention, 18(1) (IF-0.40). pp. 199-211.
Murugaiyan, Premkumar and Abhinav, Anand and Verma, Rahul and Panda, A K and Mitra, Amitava and Baysakh, Sandip and Roy, Rajat K (2018) Influence of Al addition on structural, crystallization and soft magnetic properties of DC Joule annealed FeCo based nanocrystalline alloys. Journal of Magnetism and Magnetic Materials, 448 (IF-2.630). pp. 66-74.
Nath, S K (2018) Geopolymerization behavior of ferrochrome slag and ﬂy ash blends. Construction and Building Materials, 181 (IF-3.485). pp. 487-494.
Nath, S K and Kumar, Sanjay (2018) The potential use of silico-manganese slag into cementitious materials. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.
Nath, S K and Kumar, Sanjay (2018) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization (IF-1.337). pp. 1-11.
Oellers, T and Raghavan, R and Chakraborty, J and Kirchlechner, C and Kostka, A and Liebscher, CH and Dehm, G and Ludwig, A (2018) Microstructure and mechanical properties in the thin film system Cu-Zr. Thin Solid Films, 645 (IF- 1.879). pp. 193-202.
Panda, Rekha and Jha, Manis K and Pathak, D D (2018) Commercial Processes for the Extraction of Platinum Group Metals (PGMs). In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_11. The Minerals, Metals & Materials Society 2018, pp. 119-130.
Paulose, N and Chandru, Fernando D. and Banerjee, A and Sahu, J K and Narendra Babu, S.N (2018) Creep–Fatigue Interaction Study on Gas Turbine Engine Alloy. Lecture Notes in Mechanical Engineering . pp. 323-333.
Pramanick, AK and Das, H and Reddy, GM and Ghosh, M and Nandy, S and Pal, TK (2018) Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode. Journal of Materials Engineering and Peformance .
Rai, R K and Sahu, J K (2018) Mechanism of serrated flow in a cast nickel base superalloy. Materials Letters, 210 (IF-2.572). pp. 298-300.
Rai, R K and Sahu, J K (2018) Strength ductility paradox in a directionally solidified nickel base superalloy. Materials Letters, 220 (IF-2.572 ). pp. 90-93.
Rai, R K and Sahu, J K and Jena, P S M and Das, S K and Paulose, N and Fernando, D.C (2018) Micromechanism of High-Temperature Tensile Deformation Behavior of a Directionally Solidified Nickel Base Superalloy. Journal of Materials Engineering and Performance, 27(2) (IF-1.331). pp. 659-665.
Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.
Ranjan, Ravi and Pramanick, A K (2018) TEM characterization of micro-alloyed vanadium steel at different percent reduction of rolling. Masters thesis, CSIR-NML.
Rao, M Ananda and Babu, S R and Kumar, M. V. Pavan (2018) Stress corrosion cracking failure of a SS 316L high pressure heater tube. Engineering Failure Analysis, 90 (IF-1.676). pp. 14-22.
Rojas, Jose I. and Bathula, Venkata Siva and Sahoo, K L and Crespo, Daniel (2018) Viscoelastic behaviour of a novel aluminium metal matrix composite and comparison with pure aluminium,aluminum alloys and a composite made of Al-Mg-Si alloy reinforced with SiC particles. Journal of Alloys and Compounds, 744 (IF-3.133). pp. 445-452.
Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, LK and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.
Roy, P K (2018) Creep Rupture Analysis and Life Estimation of 1.25Cr-0.5Mo, 2.25Cr-1Mo and Modified 9Cr-1Mo Steel: A Comparative Study. Journal of The Institution of Engineers (India): Series D, Online .
Saha, D and Chatterjee, D and Chakravarty, S and Mazumder, S (2018) Trace element geochemistry and mineralogy of coal from Samaleswari open cast coal block (S-OCB), Eastern India. Physics and Chemistry of the Earth, 104 (IF-1.426). pp. 47-57.
Sahu, M K and Swaminathan, J and Bandhoypadhyay, N R and Sagar, S P (2018) Creep Damage Evaluation In P92 Steel Using Second Harmonic Of High Power Ultrasonic Signal. In: 7th International Conference of Materials Processing and Characterization (ICMPC), MAR 17-19, 2017, Gokaraju Rangaraju Inst Engn & Technol, Hyderabad, INDIA.
Santosh, R and Das, Goutam and Kumar, S and Singh, P K and Ghosh, M (2018) Experimental and Computational Investigation of Structural Integrity of Dissimilar Metal Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 49A(6) (IF-1.874). pp. 2099-2112.
Sarkar, C and Kumari, P and Anuvrat, K and Sahu, SK and Chakraborty, J and Garai, S (2018) Synthesis and characterization of mechanically strong carboxymethyl cellulose-gelatin-hydroxyapatite nanocomposite for load-bearing orthopedic application. Journal Of Materials Science, 53/1 (IF- 2.599). pp. 230-246.
Sarkar, C and RayChowdhuri, Angshuman and Kumar, Amit and Laha, Dipranjan and Garai, Subhadra and Chakraborty, Jui and Sahu, Sumanta Kumar (2018) One pot synthesis of carbon dots decorated carboxymethyl cellulose- hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing. Carbohydrate Polymers, 181 (IF- 4.81). pp. 710-718.
Sau, D C and Das, Suchandan K and Bandyopadhyay, D and Mandal, G K (2018) A reduced order mathematical model of the blast furnace raceway with and without pulverized coal injection for real time plant application. International Journal of Modelling and Simulation, online . pp. 1-12.
Shah, Minal and Bakshi, Subhankar Das (2018) Three body abrasive wear of carbide-free bainite martensite and bainite-martensite structure of similar hardness. Wear, 402–403 (IF-2.531). pp. 207-215.
Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment. Materials Characterization, 140 (IF-2.714). pp. 72-85.
Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Materials Science and Engineering: A Structural materials properties microstructure, 725 (IF-3.094). pp. 215-227.
Shuvaeva, E and Kaloshkin, S and Churyukanovaa, Margarita and Perminov, A and Khriplivets, I and Mitra, A and Panda, A K and Roy, Rajat K and Premkumar, M and Zhukova, V and Zhukov, A (2018) The impact of bending stress on magnetic properties of finemet type microwires and ribbons. Journal of Alloys and Compounds, 743 (IF-3.133). pp. 388-393.
Siddique, A B and Singh, V P and Chatterjee, S and Pramanik, A K and Ray, M (2018) Facile synthesis and versatile applications of amorphous carbon dot. In: International Conference on Functional Nanomaterials (IC-FNM), Sept 28-29, 2016, Howrah, INDIA.
Singh, Charu and Meena, LK and Tiwari, S K and Singh, Raghuvir (2018) Establishing Environment Friendly Surface Treatment for AZ91 Magnesium Alloy for Subsequent Electroless Nickel Plating. Journal of The Electrochemical Society (JES), 165(2) (IF-3.259). C71-C85.
Singh, M P and Das, Avimanyu and Venugopalan, T and Mukherjee, K and Walunj, Mahesh and Nanda, T and Kumar, B Ravi (2018) Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel. Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science, 49A(2) . pp. 463-475.
Sinha, Shivendra and Mishra, D and Agrawal, A and Sahu, K K (2018) Aqueous process intensification through enhanced oxygen mass transfer using oxygen vector: An application to cleaner leaching. Journal of Cleaner Production, 176 (IF-5.715). pp. 452-462.
Tripathy, S and Gupta, G and Chowdhury, Sandip Ghosh (2018) High Entropy Alloys: Criteria for Stable Structure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A/1 (IF- 1.874). pp. 7-17.