Items where Subject is "Materials Science > Electronic and Magnetic Properties"
Group by: Creators | Item Type
Number of items at this level: 25.
Bisht, K S and Sah, K (2020) Spectroscopic changes in conventional magnetorheological fluid and graphene oxide based magnetorheological fluid with combustion method. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 89-93.
Das, T K and Banerjee, P and Mandal, S K (2016) Giant magnetoimpedance intrinsic impedance and voltage sensitivity of rapidly solidified Co66Fe2Cr4Si13B15 amorphous wire for highly sensitive sensors applications. Applied Physics A-Materials Science & Processing, 122(11) (IF-1.455).
Dayana, A M and Williams, R V (2018) Structural, optical and electrical description of camphor sulfonic acid diped poly (2, 5-dimetoxyaniline) thin film. Journal of Metallurgy and Materials Science, 60(3) . pp. 149-155.
Dey, Sushmita and Roy, R K and Mallick, A B and Mitra, A and Panda, A K (2018) Influence of rapid solidification on mangnetostructural and magnetocaloric effect in Ni53Mn24Ga23 alloy. Materials Today Communications, 17 (IF-1.859). pp. 140-143.
Dutta, Chandan and Kumar, J and Das, T K and Sagar, S P (2021) Recent Advancements in the Development of Sensors for the Structural Health Monitoring (SHM) at High-Temperature Environment: A Review. IEEE Sensors Journal, 21(14) . pp. 15904-15916.
Kakati, A and Das, S (2020) Metallic gold thin film micropattern on polydimethylsiloxane film for flexible electronic sensors and circuits. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 49-55.
Kumari, A and Tripathy, A and Mandre, N R (2021) Multi-response and Misplacement Optimization of Upgrading BMQ Ore in Liquid-Solid Fluidized Bed Separator Using Taguchi-based Grey Relational Analysis. Journal of Sustainable Metallurgy, 7(3) . pp. 1200-1223.
Mandal, S K (2011) Study of process dynamics in Floatex density separator based on computational intelligent vision. International Journal of Computational Vision and Robotics, 2 (4). pp. 314-322.
Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.
Murugaiyan, Premkumar and Mitra, A and Panda, A K and Kumar, A S and Roy, R K and Manna, K and Srivastava, S K (2019) Electromagnetic interference shielding effectiveness of amorphous and nanocomposite soft magnetic ribbons. Physica B: Condensed Matter, 568 . pp. 13-17.
Murugaiyan, Premkumar and Mitra, A and Patro, A K and Roy, R K and Churyukanovaa, Margarita and Kaloshkin, S and Shuvaeva, E and Panda, A K (2019) Role of P on amorphization, microstructure, thermo-physical and soft magnetic properties of Fe-rich FeB(P)SiNbCu melt-spun alloys. Journal of Magnetism and Magnetic Materials, 492 .
Murugaiyan, Premkumar and Mitra, Amitava and Roy, Rajat K and Bijalwan, P K and Dutta, Monojit and Banerjee, Atanu and Panda, A K (2020) Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153255.
Panda, A K and Singh, Satnam and Roy, Rajat K and Mitra, A (2012) Ferromagnetic Shape Memory Alloys (FSMAs) for Magneto-mechanical Applications. Science and Culture .
Panda, Ashis K and Roy, Rajat K and Murugaiyan, Premkumar and Das, S and Das, T K and Mitra, A (2020) Rapidly quenched magnetic materials for functional and sensor applications. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 81-88.
Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.
Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.
Saini, P K and Ahliwat, D S and Singh, D (2017) Study of electronic structure and optical properties of zinc-blende and rocksalt structures of HgSe : A DFT study. Journal of Metallurgy and Materials Science, 59(1) . pp. 29-37.
Singh, Charu and Meena, L K and Tiwari, S K and Singh, Raghuvir (2018) Establishing Environment Friendly Surface Treatment for AZ91 Magnesium Alloy for Subsequent Electroless Nickel Plating. Journal of The Electrochemical Society (JES), 165(2) (IF-3.259). C71-C85.
Singh, Sanjay and Bhardwaj, S and Panda, A K and Ahire, V and Mitra, A and Awasthi, A M and Barman, S R (2010) Structural, Thermal and Magnetic Properties of Ga Excess Ni-Mn-Ga. Materials Science Forum, 635 . pp. 43-47.
Siruguri, V and Gutiérrez, J and Barandiaràn, J M and Làzpita, P and Singh, Brajendra and Sahu, Ranjan K and Sundar Manoharan, S and Henry, P and Mondelli, C (2006) Neutron diffraction evidence for double exchange coupling in Ru-substituted La0.6Pb0.4Mn1−xRuxO3, 0x0.5. Physica B: Condensed Matter, 385-386 (1). pp. 408-410.
Upadhyay, C and Mishra, D and Anand, S and Verma, H C and Das, R P (2003) Effect of preparation conditions on formation of nanophase Ni–Zn ferrites through hydrothermal technique. Journal of Magnetism and Magnetic Materials, 260 . pp. 188-194.
Vishnoi, M and Kumar, A N V and Murugan, S S (2018) Electro chemical discharge machining and optimization of non-conducting materials. Journal of Metallurgy and Materials Science, 60(1) . pp. 13-20.
Book or NML Publication
UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8
Sankara Narayanan, T S N (2011) Tin plated contacts - Problems due to fretting corrosion and whisker growth. [Presentation Slide] (Unpublished)
Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.