Items where Subject is "Materials Science > Nano Composites"
Group by: Creators | Item Type
Number of items at this level: 32.
Bandyopadhyay , N R (2019) Efficiency enhancement of crystalline silicon solar cells by coating with luminescent silicon nanostructures. Journal of Metallurgy and Materials Science, 61(3) . pp. 135-141.
Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.
Garg, Niti and Scholl, Clark and Mohanty, Ashok and Jin, Rongchao (2010) The Role of bromide ions in seeding growth of Au nanorods. Langmuir, 26 (12). pp. 10271-10276.
Hazra, A and Hossain, S M and Pramanick, A K and Ray, M (2017) Gold-silver nanostructures: Plasmon-plasmon interaction. Vacuum, 146 (IF- 1.530). pp. 437-443.
Hussain, R R and Singh, J K and Alhozaimy, Abdulrahman and Al-Negheimish, Abdulaziz and Bhattacharya, C and Pathania, R. S. and Singh, D D N (2018) Effect of Reinforcing Bar Microstructure on Passive Film Exposed to Simulated Concrete Pore Solution. Aci materials journal, 115(2) . pp. 181-190.
Kumar, Sunil and Pattanayek, S K and Das, S K (2019) Reactivity-Controlled Aggregation of Graphene Nanoflakes in Aluminum Matrix: Atomistic Molecular Dynamics Simulation. Journal of Physics Chemistry C, 123(29) . pp. 18017-18027.
Mahato, P and Mishra, Suman K (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375 . pp. 477-488.
Majee, B P and Mishra, A K (2020) Recent advances in photodetection applications of two dimensional MoS2 nanostructures. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 103-126.
Mishra, Suman K (2020) Toughening of nanocomposite hard coatings. Reviews on advanced materials science , 59(1) (IF-1.197). pp. 553-585.
Mishra, Suman K and Mahanta, P and Sen, S and Pathak, L C (2012) Effect of Nitrogen on the Growth of Carbon Nitride Thin Films Deposited by RF Plasma Enhanced Chemical Vapor Deposition. Nanoscience and Nanotechnology Letters, 4 . pp. 90-94.
Murugaiyan, Premkumar and Abhinav, Anand and Verma, Rahul and Panda, A K and Mitra, Amitava and Baysakh, Sandip and Roy, Rajat K (2018) Influence of Al addition on structural, crystallization and soft magnetic properties of DC Joule annealed FeCo based nanocrystalline alloys. Journal of Magnetism and Magnetic Materials, 448 (IF-2.630). pp. 66-74.
Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.
Nayar, S and Pramanick, A K and Guha, Avijit and Mahato, B and Gunjan, M K and Sinha, Arvind (2008) Biomimetic synthesis of hybrid nanocomposite scaffolds by freeze-thawing and freeze-drying. Bulletin of Material Science, 31 (3). pp. 429-432.
Pal, C K and Sahu, Ranjan K and Singh, R K and Jena, A K (2019) Magnetically recyclable palladium nanoparticles (Fe3O4-Pd) for oxidative coupling between amides and olefins at room temperature. Applied Organometallic Chemistry, 33(8) .
Ray, A K and Goswami, B (2018) Forefronts of nanoinhibitors to corrosion on metals. Journal of Metallurgy and Materials Science, 60(3) . pp. 157-171.
Saha, B and Vaidya, S S and Bhattacharjee, K and Bhagavatula, I and Prasad, V (2020) Weakly coupled metal-semiconductor plasmonic nanoparticles in solution. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 127-133.
Sarkar, C and Chowdhuri, A R and Garai, S and Chakraborty, J and Sahu, Sumant Kumar (2019) Three-dimensional cellulose-hydroxyapatite nanocomposite enriched with dexamethasone loaded metal-organic framework: a local drug delivery system for bone tissue engineering. Cellulose, 26(12) (IF-4.210). pp. 7253-7269.
Sarkar, C and Kumari, P and Anuvrat, K and Sahu, Sumant Kumar and Chakraborty, J and Garai, S (2018) Synthesis and characterization of mechanically strong carboxymethyl cellulose-gelatin-hydroxyapatite nanocomposite for load-bearing orthopedic application. Journal Of Materials Science, 53/1 (IF- 2.599). pp. 230-246.
Singh, Rajesh Kumar and Singh, B K and Noor, Alam (2019) Formation of composite layer by nanocoating of organic and filler of inorganic compounds on mild steel to control in chloride ions environment. Journal of Metallurgy and Materials Science, 61(2) . pp. 109-118.
Sinha, Arvind and Das, Goutam and Sharma, Binay Kumar and Roy, Raja Prabahan and Pramanick, A K and Nayar, S (2007) Poly(vinyl alcohol)–hydroxyapatite biomimetic scaffold for tissue regeneration. Materials Science and Engineering C, 27 (1). pp. 70-74.
Soni, and Kumari, Swati and Sharma, S K and Mishra, Suman K (2018) Effect of Deposition Pressure, Nitrogen Content and Substrate Temperature on Optical and Mechanical Behavior of Nanocomposite Al-Si-N Hard Coatings for Solar Thermal Applications. Journal of Materials Engineering and Performance, 27(12) (IF-1.094). pp. 6729-6736.
Soni, and Shekh, M J and Sharma, S K and Mishra, Suman K (2020) Strain rate sensitivity behaviour of the thin films of Al, Al-Si and nanocomposite Al-Si-N: A comparative study. Materials Characterization, 169 (IF-3.562).
Surreddi, K B and Srivastava, V C and Scudino, S and Sakaliyska, M and Uhlenwinkel, V and Kim, Joon-Soo and Eckert, J (2010) Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics: Conference Series, 240 . 012155.
Toymoori, A and Webster, T (2020) The role of nanomedicine in the treatment of osteosarcoma and in the prevention of infections. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 1-12.
Verma, D and Banerjee, D and Mishra, Suman K (2019) Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings. Metallurgical and Materials Transactions A , 50(2) . pp. 894-904.
Yadav, B S and Sahu, Ranjan K and Pramanick, A K and Mishra, T and Alam, A and Bharti, M and Mukherjee, S and Kumar, S and Nayar, S (2019) Collagen functionalized graphene sheets decorated with in situ synthesized nano hydroxyapatite electrospun into fibers. Materials Today Communications, 18 . pp. 167-175.
Yoo, Kyoungkeun and Lee, Kwang Seok and Jha, Manis K and Lee, Jae-chun and Cho, Kuk (2016) Preparation of Nano-Sized Tin Oxide Powder from Waste Pb-Free Solder by Direct Nitric Acid Leaching. Journal of Nano-science and Nanotechnology, 16 (IF-1.483). pp. 11238-11241.
Book or NML Publication
UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8
Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.
Conference or Workshop Item
Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany.
Sankara Narayanan, T S N (2011) Graphene - Its role in energy storage devices. [Presentation Slide] (Unpublished)
Ray, Mallar and Pramanick, A K (2016) Optical and Structural Characterization of Reduced Graphene Oxide. Masters thesis, IIEST, Shibpur, Howrah & CSIR NML.