Items where Division is "Material Science and Technology" and Year is 2010

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | L | M | N | P | R | S | T | U | V | W | Z
Number of items: 107.

A

Al-Samman, T and Li, X and Ghosh Chowdhury, S (2010) Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy. Materials Science and Engineering: A, 527 (15). pp. 3450-3463.

B

Bedre, Mahesh D and Basavaraja, S and Deshpande, Raghunandan and Sawle, Balaji D and Lagashetty, Arun Kumar and Govindraj, B and Venkataraman, A (2010) Preparation and characterization of polyaniline-NiO nanocomposites via interfacial polymerization. Journal of Metallurgy and Materials Science, 52 (2). pp. 149-154.

Bedre, Mahesh D and Raghunandan, D and Basavaraja, S and Balaji, D S and Lagashetty, Arun Kumar and Venkataraman, A (2010) Preparation and characterization of Magnetic Fe3O4 nanoparticles. Journal of Metallurgy and Materials Science, 52 (3). pp. 209-214.

Bhattacharyya, A S and Mishra, Suman K (2010) Raman studies on nanocomposite silicon carbonitride thin film deposited by r.f. magnetron sputtering at different substrate temperatures. Journal of Raman Spectroscopy, 41 (10). pp. 1234-1239.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, S (2010) Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 28 (4). pp. 505-509.

Bui, Q V and Nam, N D and Choi, D H and Lee, J B and Lee, C Y and Kar, Abhijit and Kim, J G and Jung, S B (2010) Corrosion protection of ENIG surface finishing using electrochemical methods. Materials Research Bulletin, 45 (3). pp. 305-308.

C

Chakraborty, Jay and Kumar, Kishor and Ranjan, R and Ghosh Chowdhury, S and Singh, S R (2010) Stress, Texture and Phase Transformation in Titanium Thin Films. Texture and Anisotropy of Polycrystals, 160 . pp. 109-116.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chinnamaneni, Satya Vani and Balakrishnakurra, and Chintala, Rambabu and Kavuri, Sethu R and Mukkamala, S Babu (2010) Influence of vitamin B3 on morphosynthesis of CaCO3, BaCO3 and SrCO3 micro and nano structures. Journal of Metallurgy and Materials Science, 52 (4). pp. 351-356.

D

Das, Goutam and Das, Mousumi and Ghosh, Sabita and Dubey, A K (2010) Effect of aging on mechanical properties of 6063 Al-alloy using instrumented ball indentation technique. Materials Science and Engineering: A, 527 (6). pp. 1590-1594.

De, Santanu and Palit Sagar, S and Dey, Swapna and Prakash, Amit and Chattoraj, I (2010) Quantification of pitting in two tempers of 7075 aluminium alloy by non-destructive evaluation. Corrosion Science, 52 (5). pp. 1818-1823.

Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 .

E

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) The effect of chromia scale thickness on ASR of solid oxide fuel cell interconnects at presence of Mn3O4 and MnFe2O4 spinels. Journal of Metallurgy and Materials Science, 52 (1). pp. 103-107.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 52 (3). pp. 273-278.

Ebrahimifar, Hadi and Zandrahimia, Morteza (2010) Coating of AISI 430 ferritic stainless steel used in SOFCs in a Co-base pack mixture. Journal of Metallurgy and Materials Science, 52 (2). pp. 155-160.

G

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Ghosh, M and Kumar, K and Kailas, S V and Ray, Ajoy K (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, M and Kumar, K and Mishra, R S (2010) Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia, 63 (8). pp. 851-854.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh Chowdhury, S and Munda, Parikshit and Singh, S R (2010) Development of Advanced High Strength Steels (AHSS) for Automobiles: A Review on Design Criteria. In: International Conference : Automotive Materials & Manufacturing - 2010, Oct 2010, Pune.

Goswami, B and Ray, Ashok K (2010) Emerging trends in alternative processing and weather effects of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (3). pp. 187-208.

Goswami, B and Ray, Ashok K (2010) Emerging trends in joining processes of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (2). pp. 109-128.

Goswami, B and Ray, Ashok K (2010) Emerging trends in precipitation phenomenon of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (1). pp. 19-45.

Guha, Avijit and Nayar, S and Thatoi, Hruayanath (2010) Microwave irradiation enhances kinetics of the biomimetic process of hydroxyapatite nanocomposites. Bioinspiration & Biomimetics, 5 (2). 024001.

Gupta, Siddhi and Sinha, Satish and Sinha, Arvind (2010) Composition dependent mechanical response of transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 78 (1). pp. 115-119.

H

Hatami, Mahdi Kazemi and Barsoum, Zuheir (2010) Fatigue assessment of cruciform joints welded in different positions. Journal of Metallurgy and Materials Science, 52 (1). pp. 87-102.

Herbert, M A and Das, Goutam and Maiti, R and Chakraborty, M and Mitra, R (2010) Tensile properties of cast and mushy state rolled Al-4.5Cu alloy and in situ Al4.5Cu-5TiB(2) composite. International Journal of Cast Metals Research, The, 23 (4). pp. 216-224.

J

Jain, Jitendra and Soni, S L and Sharma, Dilip (2010) Determination of wear rate of steel in high pressure and temperature zone for prediction of balance life of autofretagged tubes. Journal of Metallurgy and Materials Science, 52 (2). pp. 181-187.

Jayabal, S and Natarajan, U (2010) Effect of fibre length and fibre content on the mechanical properties of coir fiber/polyester composites. Journal of Metallurgy and Materials Science, 52 (4). pp. 341-350.

K

Kanari, N and Mishra, D and Mochon, J and Verdeja, L F and Diot, F and Allain, E (2010) Some kinetics aspects of chlorine-solids reactions. REVISTA DE METALURGIA, 46 (1). pp. 22-36.

Kumar, Binod and Pramanick, A K (2010) A Dissertation Report on Hydrophilic Coating on Glass Substrate. Masters thesis, National Institute of Foundry and Forge Technology, Hatia, Ranchi.

Kumar, Harendra and Mohapatra, J N and Roy, Rajat K (2010) Evaluation of tempering behaviour in modified 9Cr–1Mo steel by magnetic non-destructive techniques. Journal of Materials Processing Technology, 210 (4). pp. 669-674.

Kumar, M Ashok and Reddy, K Hemachandra and Reddy, Y Venkata Mohana and Reddy, G Ramachandra and Kumar, N S Venkatesh and Reddy, BH Nanjunda (2010) Assessment of nanoclay filled epoxy on mechanical, thermal and chemical resistance properties of nanocomposites. Journal of Metallurgy and Materials Science, 52 (4). pp. 305-315.

L

Lagashetty, Arun Kumar and Bedree, Mahesh and Venkataraman, A (2010) Adsorption study of Pb+2 ions on nanoceramics. Journal of Metallurgy and Materials Science, 52 (4). pp. 357-362.

Lendave, S A and Karande, V S and Deskmukh, L P (2010) Structural and transport characteristics of HgxCd1-xS thin composite films : A correlation. Journal of Metallurgy and Materials Science, 52 (4). pp. 363-370.

M

Mandal, D and Dutta, B K and Panigrahi, S C (2010) Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites. Materials Science and Technology, 26 (2). pp. 157-163.

Mandal, G K and Das, Swapan K and Balasubramaniam, R and Mehrotra, S P (2010) Effect of Elevated Strip Entry Temperature on the Aluminum Rich Inhibition Layer at the Substrate Coating Interface During Galvanizing. Canadian Metallurgical Quarterly , 49 (3). pp. 301-309.

Mir, Aparna and Mallik, D and Bhattacharya, S and Mahata, D and Sinha, Arvind and Nayar, S (2010) Aqueous ferrofluids as templates for magnetic hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (8). pp. 2365-2369.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Mohanta, Ojaswini and Basumallick, A and Mitra, A and Panda, A K (2010) Enhancement in soft magnetic and ferromagnetic ordering behaviour through nanocrystallisation in Al substituted CoFeSiBNb alloys. Journal of Magnetism and Magnetic Materials, 322 (1). pp. 112-118.

Mohapatra, J N and Bandopadhyay, N R and Gunjan, M K and Mitra, A (2010) Study of high-temperature ageing and creep on bainitic 5Cr–0.5Mo steel by magnetic NDE techniques. Journal of Magnetism and Magnetic Materials, 322 (6). pp. 589-595.

Mohapatra, J N and Swaminathan, J and Ghosh, M K and Mitra, A (2010) Magnetic Nondestructive Evaluation of Creep Behavior in Water-Quenched Modified 9Cr-1Mo Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 41A (4). pp. 900-905.

Munda , Parikshit and Das, Swapan K and Ghosh Chowdhury, S and Das, Goutam and Singh, S R (2010) Investigation on the Failure of Gear Pump. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

N

Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545.

Narasaiah, N and Tarafder, S and Sivaprasad, S (2010) Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel. Materials Science and Engineering: A, 527 (9). pp. 2408-2411.

Nayar, S and Mir, Aparna and Ashok, Aarti and Guha, Avijit and Sharma, Vikas (2010) Bovine Serum Albumin Binding and Drug Delivery Studies with PVA-Ferrofluid. Journal of Bionic Engineering, 7 (1). pp. 29-34.

Nayar, S and Palit Sagar, S and Guha, Avijit (2010) Non-destructive evaluation of mechanical properties of poly (vinyl) alcohol-hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (4). pp. 1099-1102.

P

Paetzke, N and Shakhverdova, I P and Levin, A A and Reibold, M and Kochmann, W and Paufler, P and Meyer, D C (2010) Nanoindentation behaviour and microstructure of several wootz-type steels. Journal of Metallurgy and Materials Science, 52 (1). pp. 47-65.

Palit Sagar, S and Hua , Jia Jerry and Rose, Joseph (2010) Ultrasonic Guided Wave Phased Array Inspection of Pipelines. Journal of Non destructive Testing & Evaluation, 9 (2). pp. 33-36.

Panda, A K and Mitra, A and Mohapatra, J N (2010) Magnetic Barkhausen Emissions: A Tool to Study Creep Damage in Steel. In: 8th International conference on Barkhausen Noise and Micromagnetic Testing (ICBM8), , Feb 11-12, 2010, Anupuram, India.

Parveen, Nikhat and Murthy, G V S (2010) Studies on ilmenite for applications as electronic materials. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, Mita and Tarafder, S (2010) Simulation of cyclic plastic deformation response in SA333 C–Mn steel by a kinematic hardening model. Computational Materials Science, 48 (3). pp. 662-671.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theoretical and Applied Fracture Mechanics, 54 (1). pp. 63-70.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials, 401 . pp. 17-24.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) True stress control asymmetric cyclic plastic behavior in SA333 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 440-446.

Pramanick, A K (2010) The Effect of Cobalt Addition on Microstructural Variation in Melt Spun ZR-Al-Cu-Ni Alloys. In: National Conference with international participation of Materials science and new materials-2008, December 4-5, 2008, Sofia, Bulgaria.

R

Raji, K and Cecil Raj, S Alfred (2010) Sintered properties of aluminium alloy for better nano tool products. Journal of Metallurgy and Materials Science, 52 (2). pp. 169-172.

Raji, K and Raj, S Alfred Cecil (2010) Plasticity of tensile specimen of 7% copper in aluminium composite. Journal of Metallurgy and Materials Science, 52 (4). pp. 379-383.

Rajini Kanth, B and Ramarao, N V and Panda, A K and Gopalan, R and Mitra, A and Mukhopadhyay, P K (2010) Effect of annealing on the martensitic transformation of a CoNiAl ferromagnetic shape memory alloy. Journal of Alloys and Compounds, 491 (1-2). pp. 22-25.

Rajnikanth, V and Husain, M M and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Ravi Kumar, B (2010) Influence of crystallographic textures on tensile properties of 316L austenitic stainless steel. Journal of Materials Science, 45 (10). pp. 2598-2605.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2010) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Das, Swapan K and Sharma, Sailaja and Sahu, J K (2010) Effect of thermal cycles on heavily cold deformed AISI 304L austenitic stainless steel. Materials Science and Engineering: A, 527 (4-5). pp. 875-882.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Ray, Ashok K and Goswami, B and Tiwari, Y N and Das, H K and Das, D K and Kumar, Sashi Bhusan (2010) Fatigue and creep damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines. Transactions of The Indian Institute of Metals, 63 (2-3). pp. 485-491.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Ranganath, V R and Tiwari, Y N and Goswami, B and Dwarakadasa, E S (2010) Failure: Chapter 8. In: Introduction to the science and engineering of materials; MSE 209. Uinversity of Virginia, USA.

Ray, K K and Dutta, K and Sivaprasad, S and Tarafder, S (2010) Fatigue damage of AISI 304 LN stainless steel: Role of mean stress. Procedia Engineering, 2 (1). pp. 1805-1813.

Ray, Mallar and Basu, T S and Jana, Arpita and Bandopadhyay, N R and Hossain, S M and Pramanick, A K and Kile, Robert F (2010) Luminescent core-shell nanostructures of silicon and silicon oxide: Nanodots and nanorods. Journal of Applied Physics, 107 (6). 064311.

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Roy, Nilima and Bose, S C and Ghosh, R N (2010) Stochastic aspects of evolution of creep damage in austenitic stainless steel. Materials Science and Engineering: A, 527 (18-19). pp. 4810-4817.

Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Runyoro, Joseph (2010) Effect of restrained hot spots and integrity of steel welded joints. Journal of Metallurgy and Materials Science, 52 (2). pp. 129-140.

Runyoro, Joseph (2010) The effect of tightening torque on anchor bolts embedded in concrete. Journal of Metallurgy and Materials Science, 52 (1). pp. 67-85.

S

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Samal, S and Mukherjee, P S and Ray, Ajoy K (2010) Comparative Study on Energy Consumption and Yield by Various Thermal Plasma Routes for Production of Titania slag. Plasma Chemistry and Plasma Processing, 30 (3). pp. 413-428.

Sarkar, Partha and Mohanta, Ojaswini and Pal, S K and Panda, A K and Mitra, A (2010) Magneto-Impedance behavior of Co-Fe-Nb-Si-B-based ribbons. Journal of Magnetism and Magnetic Materials, 322 (8). pp. 1026-1031.

Sasikumar, R and Arunachalam, R M (2010) Production of nanomaterials through machining. Journal of Metallurgy and Materials Science, 52 (2). pp. 141-147.

Sen, S and Saha, P and Prasad, K (2010) A novel technique for the synthesis of CaCu3Ti4O12 ceramics. Materials Science-Poland, 28 (1). pp. 265-271.

Seshu Kumar, A and Ravi Kumar, B and Datta, G L and Ranganath, V R (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering: A, 527 (4-5). pp. 954-960.

Sharma, Meenakshi (2010) Hydrophillic coating on Glass Substrate. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Singh, Kulwant and Bidaye, A C and Suri, A K (2010) Model for prediction of coating composition deposited by sputtering using composite target in a reactive gas environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 317-329.

Singh, Rajesh Kumar (2010) The corrosion protection of stainless steel in phosphate fertilizer industry. Journal of Metallurgy and Materials Science, 52 (2). pp. 173-180.

Singh, Sanjay and Bhardwaj, S and Panda, A K and Ahire, V and Mitra, A and Awasthi, A M and Barman, S R (2010) Structural, Thermal and Magnetic Properties of Ga Excess Ni-Mn-Ga. Materials Science Forum, 635 . pp. 43-47.

Sinha, Satish and Guha, Avijit and Sinha, Arvind (2010) Macroporous hybrid frameworks for bone graft substitute. Materials Science and Engineering: C, 30 . pp. 873-877.

Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157.

Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, V and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behaviour of SA 333 Gr.6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, Vivek and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87(8) . pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563.

Srinivasan, A and Swaminathan, J and Gunjan, M K and Pillai, U T S and Pal, B C (2010) Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy. Materials Science and Engineering: A, 527 (6). pp. 1395-1403.

Stoichev, N and Pramanick, A K and Yaneva, S and Giurov, S and Lazarova, M and Setman, D and Stefanov, G (2010) Influence of Zr on structure development in rapidly solidified AI-Si alloys. In: Nanoscience & Nanotechnology-10. Bulgaria, Sofia, Bulgaria, pp. 138-140. ISBN 1313-8995

Suleimenov, E N and Mahato, M M (2010) Changes in melted slag structure with their temperature change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Suleimenov, E N and Mahato, M M (2010) Melted slag and electric current. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

T

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Tarafder, S and Das, S K (2010) Fractal Analysis of Microstructural Images For Evaluation of HSLA Steel. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, 2 . pp. 567-276.

Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Tiwari, Y N (2010) Assessment of SRT & Mechanical properties on boiler tubes. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tran, N and Mir, Aparna and Mallik, D and Sinha, Arvind and Nayar, S and Webster, Thomas J (2010) Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus. International Journal of Nanomedicine, 5 . pp. 277-283.

U

Upadhyay, Rajendra Kumar and Venkatesh, Akella Satya and Roy, Subrata (2010) Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation. Resource Geology, 60 (2). pp. 203-211.

V

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering: A, 527 (6). pp. 1448-1452.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) Effect of A Scandium Addition On An Al-2% Si Alloy Processed by ECAP. Reviews on Advanced Materials Science, 25 (2). pp. 99-106.

Venkateswarlu, K and Rajnikanth, V and Sen, Mani Kuntal and Alhajeri, S N and Langdon, T G (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667-669 . pp. 743-748.

Venkateswarlu, K and Saurabh, Suman and Rajnikanth, V and Sahu, Ranjan K and Ray, Ajoy K (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Journal of Materials Engineering and Performance, 19 (2). pp. 231-236.

W

Wackermann, Ken and Kumar Sahu, Jitendra and Christ, H J (2010) 475oC Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures"Fracture of Mateials and Structures from Micro to Macro Scale, 2010, DVM, Berlin.

Wackermann, Ken and Sahu, J K and Christ, H J (2010) 475°C Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures "Fracture of Materials and Structures from Micro to Macro Scale", D. Klingbeil, M. Vormwald, K.-G. Eulitz (Hg), 2010, DVM, Berlin.

Z

Zandrahimi, Morteza and Ebrahimifar, Hadi (2010) A study on the formation of intermetallic compound coatings on Inconel through pack cementation method. Journal of Metallurgy and Materials Science, 52 (4). pp. 331-339.

This list was generated on Thu Oct 1 15:45:11 2020 IST.