Items where Division is "Corrosion and Surface Engineering" and Year is 1997

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | J | M | P | S
Number of items: 19.

B

Bhatia , B S and Singh, Janardan (1997) Some Aspects of Tubes Galvanising and Practice at 'Tubes Division' of 'Tata Steel'. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Bhattamishra, A K (1997) Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al---Mg---Si alloys. Materials & Design, 18 (1). pp. 25-28.

C

Chattoraj, I (1997) Industrial corrosion failure: Case studies. In: UNSPECIFIED.

Chattoraj, I (1997) Stepwise cracking in a longitudinally welded steel linepipe. Transactions of the Indian Institute of Metals, 50 (1). pp. 97-102.

Chattoraj, I and Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K (1997) Corrosive degradation and failure of vertical furnace wall tubes of a boiler. Engineering Failure Analysis, 4 (4). pp. 279-286.

Chattoraj, I and Joarder, A and Bhattamishra, A K and Bhattacharya, D K and Ghosh, R N (1997) Crevice attack of a boiler steam drum. Canadian Metallurgical Quarterly, 36 (2). pp. 143-148.

D

Dev, S C and Singh, Inder and Basu, D K (1997) Corrosion behaviour of silver brazing alloys in different environments. Anti-corrosion methods and materials, 44 (4). 260- .

J

Jha, R (1997) Recovery of Zinc from Zinc Ash. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

M

Mahajan, R C (1997) Spelter Pan - Design, Heating Systems and Operations. In: Workshop on Hot Dip Galvanizing, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

P

Pandey, J L and Singh, Inder and Singh, M N (1997) Electrochemical corrosion behaviour of heat-treated AISI 304 austenitic stainless steel in inorganic acid mixture. Anti-corrosion methods and materials, 44 (1). 6- .

S

Singh, D D N (1997) Localized corrosion and component failures: Causes, mechanism and remedial measures. In: Failure analysis: Proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 169-211.

Singh, D D N (1997) Pickling, Rinsing and Fluxing of Steels before Galvanizing. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, D D N (1997) Post Treatment of Galvanized Coating to Improve Corrosion Resistance. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, Inder and Basu, D K and Singh, M N and Bhattamishra, A K and Dev, S C (1997) Role of silicon in the corrosion resistance of Cu-Si alloys in natural seawater. Anti-corrosion methods and materials, 44 (3). 195- .

Singh, Inder and Bhattamishra, A K and Basu, D K (1997) Electrochemical behaviour of AISI-316 stainless steels in sulphuric nitric acid mixtures. Anti-corrosion methods and materials, 44(3) . pp. 200-203.

Singh, Janardan and Bhatia, B S (1997) Effect of Steel Composition on Zinc Coating and Pot Failure. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Singh, M N and Singh, Inder and Pandey, J L (1997) High temperature corrosion-resistant coating on steel for short-term application. Anti-Corrosion Methods and Materials, 44 (2). pp. 90-93.

Singh , Inder (1997) Corrosion Behaviour of Galvanised Products. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

Subramanian, V R (1997) Galvanizing Industries in India - Present Scenario. In: Workshop on Hot Dip Galvanizing - HODGA -97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur.

This list was generated on Mon Dec 6 05:30:48 2021 IST.