Items where Author is "Tarafder, S"
Group by: Item Type | No Grouping Number of items: 159.
ArticleSen, Mainak and Suman, Swati and Mukherjee, Shreya and Banerjee, Trideep and Sivaprasad, S and Tarafder, S and Bhattacharjee, Amit and Kar, Sujoy (2021) Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy. International Journal of Fatigue, 148 (IF-4.369 ). p. 106238. Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance . Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11. Barat, Kaustav and Sivaprasad, S and Kar, Sujoy Kumar and Tarafder, S (2020) A novel rate based methodology for creep fatigue life estimation of superalloys. International Journal of Pressure Vessels and Piping, 182 (IF-2.230). p. 104064. Metya, Avijit Kumar and Das, Anindya and Tarafder, S and Balasubramaniam, Krishnan (2019) Nonlinear Lamb wave for the evaluation of creep damage in modified 9Cr–1Mo steel. NDT & E International, 107 . Barat, K and Sivaprasad, S and Kar, S K and Tarafder, S (2019) Low‐cycle fatigue of IN 718: Effect of waveform. Fatigue & Fracture Of Engineering Materials And Structures . pp. 1-10. Mukherjee, S and Barat, K and Sivaprasad, S and Tarafder, S and Kar, S K (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions. Materials Science and Engineering: A, 762 . p. 138073. Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2019) Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation. Physical Mesomechanics , 22(4) . pp. 340-344. Dey, R and Das, A and Tarafder, S and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(5) (IF-1.985). pp. 47-51. Das, A and Tarafder, S and Sivaprasad, S and Chakrabarti, D (2019) Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels. Materials Science and Engineering A, 754 . pp. 348-360. Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 . pp. 342-353. Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743. Barat, K and Ghosh, M and Sivaprasad, S and Kar, S K and Tarafder, S (2018) High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49(10) (IF-1.985). pp. 5211-5226. Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2018) A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC. Journal of Materials Engineering and Performance, 27(9) (IF-1.094). pp. 4893-4899. Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2018) Nonlinear Lamb wave mixing for assessing localized deformation during creep. NDT & E International, 98 (IF-2.781). pp. 89-94. Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2018) Comparative assessment of the fracture behaviour of micro-alloyed and API-5L X65 steels in simulated fuel grade ethanol environment. Engineering Fracture Mechanics, 189 (IF-2.151). pp. 1-12. Bagui, Sumanta and Laha, K and Mitra, R and Tarafder, S (2018) Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel. Materials Research Express, 5 . p. 116515. Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.389). pp. 1-20. Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2018) Orientation-dependent crack-tip blunting and crack propagation in a single crystal BCC iron. Bulletin of Material Science, 41(6) (IF-1.264). pp. 1-6. Paul, Surajit Kumar and Kumar, Sunil and Tarafder, S (2017) Effect of loading conditions on nucleation of nano void and failure of nanocrystalline aluminum: An atomistic investigation. Engineering Fracture Mechanics, 176 (IF-2.151). pp. 257-262. Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258. Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686. Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963. Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64. Arora, Punit and Gupta, S K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2016) Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling. International Journal of Fatigue, 85 (IF-2.899). pp. 98-113. Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91. Dey, R and Tarafder, S and Sivaprasad, S (2016) Influence of phase transformation due to temperature on cyclic plastic deformation in 304LN stainless steel. International Journal Of Fatigue, 90 (IF-2.899). pp. 148-157. Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Tarafder, S (2016) Role of Chloride in the Corrosion and Fracture Behavior of Micro-Alloyed Steel in E80 Simulated Fuel Grade Ethanol Environment. Materials, 9(6) (IF-2.654). Singh, R K and Sahu, J K and Tarafder, S (2016) Strain rate effect on cyclic deformation behaviour of advanced ultra-super critical boiler grade wrought Ni-based superalloy IN740H at 760 °C. Materials Science and Engineering A, 658 (IF-3.094). pp. 272-279. Arora, Punit and Gupta, Suneel K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2015) Fatigue studies on Carbon-steel tubes under multiaxial loading. Transactions, SMiRT-23, Manchester, United Kingdom, August 10-14, 2015, Division III (Applied Computation Simulation and Animation) . pp. 1-13. Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132. Barat, K and Metya, A and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2015) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204. Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827. Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204. Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101. Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206. Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86. Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47. Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009. De, J and Bhattacharjee, S and Dhar, S and Acharyya, S K and Gupta, S K and Tarafder, S (2014) Finite Element Simulation of Multi-Axial Low Cycle Fatigue of Material SA333. Procedia Engineering, 86 (NIF-0.629). pp. 158-165. Roy, Arijit and Manna, I and Tarafder, S and Sivaprasad, S and Paswan, S and Chattoraj, I (2013) Hydrogen enhanced fatigue crack growth in an HSLA steel. Materials Science and Engineering A, 588 (IF-2.108). pp. 86-96. Venugopalan, T and Misra, S and Srikanth, S and Tarafder, S (2013) Preface. Transactions of Indian Institute of Metals, 66(5-6) Special Issue: SI (IF-0.215). p. 445. Roy, Arijit and Manna, I and Tarafder, S and Chattoraj, I (2013) Hydrogen interactions with overload in modifying fatigue crack growth rate recovery in an HSLA steel. Materials Science and Engineering A, 579 (IF-2.108). pp. 9-17. Paul, Surajit Kumar and Tarafder, S (2013) Cyclic plastic deformation response at fatigue crack tips. International Journal of Pressure Vessels and Piping, 101 (IF-0.989). pp. 81-90. Ray, Kalyan Kumar and Roy, Himadri and Ray, Ayan and Dutta, Krishna and Tarafder, S (2013) Deformation, fatigue and fracture vis-à-vis deformation induced martensite in AISI 304LN stainless steel. Advanced Materials Research, 794 . pp. 415-428. Khutia, N and Dey, P P and Paul, Surajit Kumar and Tarafder, S (2013) Development of non Masing characteristic model for LCF and ratcheting fatigue simulation of SA333 C–Mn steel. Mechanics of Materials, Volume 65, October 2013, Pages 88–102 (IF-1.936). pp. 88-102. Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041. Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhumik, S K (2013) Microstructural Damage Evaluation in Ni-based Superalloy Gas Turbine Blades by Fractal Analysis. Procedia Engineering, 55 . pp. 289-294. Roy, H and Ray, A and Barat, K and Hochmuth , C and Sivaprasad, S and Tarafder, S and Glatzel, U and Ray, K K (2013) Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel. Materials Science & Engineering A, 561 (IF-2.003). pp. 88-99. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2012) True stress-controlled ratcheting behavior of 304LN stainless steel. Journal of Materials Science, 47 (11). pp. 4660-4672. Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2012) Cyclic fracture behaviour of 304LN stainless steel under load and displacement control modes. Fatigue & fracture of engineering materials & structures, 35 (2). pp. 108-113. Das, Arpan and Tarafder, S and Chakraborti, P C (2011) Estimation of deformation induced martensite in austenitic stainless steels. Materials Science and Engineering A, 529 (1). pp. 9-20. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Key issues in cyclic plastic deformation: experimentation. Mechanics of Materials, 43 (11). pp. 705-720. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation behavior in SA333 Gr. 6 C-Mn steel. Materials Science and Engineering A, 528 (24). pp. 7341-7349. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2011) Cyclic plastic deformation and damage in 304LN stainless steel. Materials Science and Engineering A, 528 (15). pp. 4873-4882. Das, Arpan and Chakraborti, P C and Tarafder, S and Bhadeshia, H K D H (2011) Analysis of deformation induced martensitic transformation in stainless steels. Materials Science and Technology, 27 (1). pp. 366-370. Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Connection between deformation-induced dislocation substructures and martensite formation in stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 91 (10). pp. 664-675. Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel. Materials Science and Engineering A, 528 (27). pp. 7909-7914. Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 . Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549. Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theoretical and Applied Fracture Mechanics, 54 (1). pp. 63-70. Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, Vivek and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87(8) . pp. 464-469. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) True stress control asymmetric cyclic plastic behavior in SA333 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 440-446. Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, V and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behaviour of SA 333 Gr.6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 464-469. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, Mita and Tarafder, S (2010) Simulation of cyclic plastic deformation response in SA333 C–Mn steel by a kinematic hardening model. Computational Materials Science, 48 (3). pp. 662-671. Narasaiah, N and Tarafder, S and Sivaprasad, S (2010) Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel. Materials Science and Engineering: A, 527 (9). pp. 2408-2411. Ray, K K and Dutta, K and Sivaprasad, S and Tarafder, S (2010) Fatigue damage of AISI 304 LN stainless steel: Role of mean stress. Procedia Engineering, 2 (1). pp. 1805-1813. Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112. Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157. Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545. Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622. Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563. Tarafder, Mita and Chattoraj, I and Nasipuri, M and Tarafder, S and Das, S K (2010) Fractal Analysis of Microstructural Images For Evaluation of HSLA Steel. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, 2 . pp. 567-276. Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials, 401 . pp. 17-24. Das, Arpan and Das, Swapan K and Tarafder, S (2009) Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A, 40 (13). pp. 3138-3146. Ghosh, Swati and Kain, V and Ray, A and Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization. Metallurgical and Materials Transactions A, 40 (12). pp. 2838-2949. Das, Arpan and Tarafder, S (2009) Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. International Journal of Plasticity, 25 (11). pp. 2222-2247. Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Crack Tip Damage Mechanism under Monotonic and Cyclic Loading Conditions. Key Engineering Materials , 417-418 (8). pp. 105-108. Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Monotonic vis-à-vis cyclic fracture behaviour of AISI 304LN stainless steel. Engineering Fracture Mechanics, 76 (12). pp. 1822-1832. Parida, N and Das, Swapan K and Tarafder, S (2009) Failure analysis of railroad wheels. Engineering Failure Analysis, 16 (5). pp. 1454-1460. Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Self-similar and self-affine characteristics of microstructural images of HSLA steel. Materials Science and Technology, 25 (4). pp. 542-548. Das, Swapan K and Chatterjee, S and Tarafder, S (2009) Effect of microstructures on deformation behaviour of high-strength low-alloy steel. Journal of Materials Science, 44 (4). pp. 1094-1100. Das, K P and Ganguly, S and Chattopadhyay, P P and Tarafder, S and Bandopadhyay, N R (2009) Exploring The Possibilities Of Development Of Directly Quenched TRIP-Aided Steel By The Artificial Neural Networks (ANN) Technique. Materials and Manufacturing Processes, 24 (1). pp. 68-77. Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Fractal Analysis to Determine Self-Similar Characteristics in the Microstructure of HSLA Steel. Materials and Manufacturing Processes, 24 . pp. 145-149. Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2008) Correspondence of fracture surface features with mechanical properties in 304LN stainless steel. Materials Science and Engineering: A, 496 (1-2). pp. 98-105. Das, Arpan and Tarafder, S (2008) Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scripta Materialia, 59 (9). pp. 1014-1017. Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683. Roy, H and Parida, N and Sivaprasad, S and Tarafder, S and Ray, K K (2008) Acoustic emissions during fracture toughness tests of steels exhibiting varying ductility. Materials Science and Engineering: A, 486 (1-2). pp. 562-571. Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286. Das, Swapan K and Tarafder, S and Panda, A K and Chatterjee, S and Mitra, A (2007) Magnetic and mechanical properties of Cu-strengthened aged HSLA-100 steel. Philosophical Magazine, 87 (32). pp. 5065-5078. Tarafder, S and Sivaprasad, S and Ray, K K (2007) Ductile fracture behaviour of primary heat transport piping material. Materials Science and Technology, 23 (11). pp. 1285-1293. Tarafder, S and Sivaprasad, S and Ranganath, V R (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue and Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876. Biswas, Somjeet and Sivaprasad, S and Narasaiah, N and Tarafder, S and Chakraborti, P C (2007) Load history effect on FCGR behaviour of 304LN stainless steel. International Journal of Fatigue, 29 (4). pp. 786-791. Das, Swapan K and Narasaiah, N and Sivaprasad, S and Chatterjee, S and Tarafder, S (2007) Effect of aging on fatigue crack growth behaviour of Cu bearing HSLA-100 steel. Materials Science and Technology, 23 (2). pp. 177-182. Roy, A and Tarafder, S and Sivaprasad, S and Das, Swapan K and Manna, I and Chattoraj, I (2007) Fatigue crack growth retardation in an HSLA steel in benign environments. International Journal of Fatigue, 29 (2). pp. 254-260. Goswami, B and Ravi Kumar, B and Tarafder, S and Guguloth, K and Rupa, P K P and Kumar, S B and Ray, Ashok K (2007) Fatigue damage of a thermal barrier coated Ni-base superalloy. High Temperature Materials and Processes, 26 (3). pp. 209-219. Das, Swapan K and Chatterjee, S and Tarafder, S (2006) Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel. Materials Science and Technology, 22 (12). pp. 1409-1414. Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79. Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013. Narasaiah, N and Tarafder, S and Ray, K K (2006) Technique for direct measurement of effective fatigue threshold of materials. Materials Science and Technology, 22 (5). pp. 547-552. Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200. Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S and Nasipuri, M (2005) Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel. Zeitschrift für Metallkunde, 96 (8). pp. 924-932. Tarafder, Mita and Dey, Swati and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2004) Initiation fracture toughness of HSLA steel through automatic measurement of stretch zone. Materials Science and Technology, 20 (12). pp. 1531-1537. Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2004) Modelling ductile fracture behaviour from deformation parameters in HSLA steels. Fatigue & Fracture of Engineering Materials & Structures, 27 (10). pp. 897-909. Ranganath, V R and Das, Goutam and Tarafder, S and Das, Swapan K (2004) Failure of a swing pinion shaft of a dragline. Engineering Failure Analysis, 11 (1). pp. 599-604. Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212. Parida, N and Tarafder, S and Das, Swapan K and Kumar, P and Das, Goutam and Ranganath, V R and Bhattacharya, D K (2003) Failure analysis of coal pulverizer mill shaft. Engineering Failure Analysis, 10 (6). pp. 733-744. Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233. Singh, P K and Ranganath, V R and Tarafder, S and Prasad , P and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic-plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752. Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752. Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671. Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186. Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA-100 steels. Materials Science and Engineering A, 339 (1-2). pp. 136-149. Sivaprasad, S and Tarafder, S and Ranganath, V R and Das, Swapan K and Ray, K K (2002) Effect of prestrain on stretch-zone formation during ductile fracture of Cu-strengthened high-strength low-alloy steels. Metallurgical and Materials Transactions A, 33 (12). pp. 3731-3740. Parida, N and Tarafder, S (2001) Failure analysis of turbo-generator of a 10 MW captive power plant. Engineering Failure Analysis, 8 (3). pp. 303-309. Sivaprasad, S and Tarafder, S and Das, Swapan K and Ranganath, V R and Ray, K K (2001) The role of stereology in estimation of ductile fracture toughness of structural materials. Image Analysis in Materials and Life Sciences . pp. 86-95. Sivaprasad, S and Tarafder, S and Tarafder, Mita and Ray, K K (2000) An alternative method of decreasing ΔK FCGR testing. International Journal of Fatigue, 22 (7). pp. 593-600. Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Fatigue crack growth studies on Cu-strengthened HSLA steels in Air and in simulated sea water. Transaction of the Indian Institute of Metals, 53 (3). pp. 333-339. Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433. Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201. Ray, Ashok K and Tiwari, Y N and Singh, R and Tarafder, S (2000) Prediction of remaining life of a FCCU reactor plate. Engineering Failure Analysis, 7 (2). pp. 75-86. Parida, N and Sivaprasad, S and Tarafder, S and Ranganath, V R and Bhattacharya, D K (1999) Acoustic emission: A novel technique for the study of fracture micro-mechanisms. Journal of non destructive evaluation, 19 (3). pp. 51-55. Mukhopadhyay, N K and Sridhar, G and Parida, N and Tarafder, S and Ranganath, V R (1999) Hydrogen embrittlement failure of hot dip galvanised high tensile wires. Engineering Failure Analysis, 6 (4). pp. 253-265. Tarafder, Mita and Tarafder, S and Ranganath, V R (1997) Location independent CCL relations for standard fracture mechanics specimens. International Journal of Fatigue, 19 (8-9). pp. 635-640. Tarafder, Mita and Tarafder, S and Ranganath, V R and Ghosh, R N (1997) Finite element solutions for stress intensity factors in longitudinally cracked cylindrical components. International Journal of Pressure Vessels and Piping, 70 (2). pp. 127-133. Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Fracture mechanics expressions for the standard chord-supported arc bend specimen. Journal of Testing and Evaluation, 24 (2). pp. 73-79. Ranganath, V R and Tarafder, S (1995) Application of fracture-mechanics for weld integrity assessment. Sadhana-academy proceedings in engineering sciences, 20 ( ). pp. 233-246. Tarafder, Mita and Ranganath, V R and Tarafder, S and Ghosh, R N (1995) Fatigue life prediction software for engineering components. NML Technical Journal, 37 (2). pp. 43-52. Tarafder, S and Tarafder, Mita and Ranganath, V R (1994) Compliance crack length relations for the 4-point bend specimen. Engineering Fracture Mechanics, 47 (6). p. 901. Tarafder, S and Tarafder, Mita and Ranganath, V R (1994) Compliance crack length relations for the four-point bend specimen. Engineering Fracture Mechanics, 47 (6). pp. 901-907. Tarafder, S and Ranganath, V R and Tarafder, Mita (1994) Development of fracture mechanics expression by finite element analysis. NML Technical Journal, 36 (4). pp. 145-155. Book or NML PublicationSahu, J K and Swaminathan, J and Sivaprasad, S and Ray, Ajoy K and Tarafder, S and Chaudhuri, S and Ghosh, R N (2008) Use of expert system software for life monitoring of power plant components. In: Remaining Life Assessment of aged Components in Thermal Power Plants & Petrochemical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 169-181. ISBN 81-87053-73-1 Sivaprasad, S and Tarafder, S (2007) Corrosion of stressed components. In: Training programme on industrial corrosion: Evaluation and mitigation, 5-7 December 2007. NML, Jamshedpur, pp. 68-91. Ray, K K and Narasaiah, N and Tarafder, S (2006) Comparative Assessment of Fatigue-Thresholds Estimated by Short and Long Cracks. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006 (B.). Springer, Netherlands, pp. 221-222. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online) Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S (2006) A Novel Technique for Extracting Stretch Zone Features from Fractographs. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006, B. ( 2T3). Springer, Netherlands, pp. 145-146. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online) Tarafder, S (2001) Fracture Mechanisms and the Quantification of Fracture Resistance. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3 Tarafder, S (2001) Fracture mechanisms and the quantification of fracture resistance. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3 Tarafder, S (1997) Mechanisms of fatigue failures. In: Failure analysis: proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 147-168. Conference or Workshop ItemMetya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2017) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. In: 2nd International Conference on Emerging Materials: Characterization and Application (EMCA-2017), March, 2017, NIT, Durgapur. Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India. Goyal, Sumit and Gupta, S K and Sivaprasad, S and Tarafder, S and Bhasin, V and Vaze, K K and Ghosh, A K (2012) Low cycle fatigue and cyclic plasticity bahaviour of Indian PHWR / AHWR primary piping materials. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India. Tarafder, Mita and Sujata, M and Ranganath, V R and Tarafder, S and Bhaumik, S (2012) Microstructural damage evaluation in Ni-based superalloy gas turbine blades by fractal analysis. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction (CF-6), 22-25 January 2012, Mamallapuram, India. Singh, P K and Arora, Punit and Bhasin, V and Vaze, K K and Pukazhendi, D M and Gandhi, P and Raghava, G and Sivaprasad, S and Tarafder, S (2011) Fatigue studies on stainless steel piping materials and components: Indian AHWR. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India. Sivaprasad, S and Paul, Surajit K and Tarafder, S and Gupta, Suneel K and Bhasin, Vivek (2011) Cyclic plastic deformation behaviour of PHT piping materials - an experimental investigation. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India . Arora, Punit and Gupta, Suneel K and Bhasin, V and Vaze, KK and Sivaprasad, S and Tarafder, S (2011) Multiaxial fatigue studies on carbon steel piping material of Indian PHWRs. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India . Tarafder, S and Sivaprasad, S (2009) Component Integrity Evaluation. In: Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur. Tarafder, S (2008) Evaluation of Mechanical Properties and Mechanisms of Deformation and Fracture. In: Training Programme on Special Metal Casting and Forming Processes-(CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur. Tarafder, S and Gupta, K K (2004) Estimation of Uncertainty in Mechanical Testing. In: Refresher Course on ISO/IEC 17025 Standards, 27-28 Aug 2004, Kolkata. Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Advances in computer-aided crack length measurement during fatigue crack growth testing. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur. Tarafder, S (1994) Recent Advances in Heat-Treat Technology. In: Workshop on Heat Treatment and Surface Engineering of Iron and Steels (HTIS-94), May 11-13, 1994, NML, Jamshedpur. Project ReportsSoupramanien, C and Paul, K K and Sivaprasad, S and Tarafder, S and Narasaiah, N (2011) Design and Development of Loading Fixture for Mixed Mode I/II Fracture Studies. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted) Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted) Roy, Nilima and Ghosh, R N and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2008) Software development for Critical Assessment of High Temperature Engineering components. Other (TMP). CSIR-NML, Jamshdpur. (Submitted) Sivaprasad, S and Ghosh, M and Das, Swapan K and Ghosh Chowdhury, S and Tarafder, S (2007) Evolution of Deformation-Induced Martensite during Fatigue Deformation of AISI 304LN Stainless Steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Sahu, J K and Singh, S R and Das, Samar and Sivaprasad, S and Tarafder, S and Ghosh, R N (2006) Deformation mechanism in a single phase austenitic and ferrito-austenitic stainless steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Tarafder, Mita and Tarafder, S and Dash, Byomkesh and Dey, Swati and Sivaprasad, S and Das, Swapan K (2006) Modelling of Crack-tip Blunting using Finite Element Method (FEM) (GAP-0088). Grant in Aid (GAP). National Metallurgical Laboratory, Jamshedpur. (Submitted) Tarafder, Mita and Das, Swapan K and Dash, Byomkesh and Tarafder, S and Chattoraj, I (2006) Fractal Characterisation of Ductile Fracture Surface. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted) Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur. |